REPAIR TO SECURITY FENCING, BOUNDARY WALL, GATES AND OTHER CONNECTED WORKS UNDER AGE B/R-I OF GE (AF) ADM AREA AT AF STN AGRA.

Amount

Taking down cement plaster on walls/ceiling of any description including racking out joints hacking for key, scrubbing down with water etc. and removing rubbish complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work & precast concrete articles complete all as specified and directed.

M&L for brick work with fly ash bricks, old size, class designation 75(Kgf/cm2) straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:6 complete all as specified and directed.

All as per item No. 03 above but except Bricks NOTE: Old brick retrieved from demolition shall be used.

M&L for rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:4 finished fair and even complete all as specified and directed.

M&L for applying two coats of cement base paint over a coat of alkali resistant primer on new surfaces of walls including preparation of surface complete all as specified and directed.

M&L for preparation of old surface of walls and applying two coats of cement base paint complete all as specified and directed.

M&L for complete removal of existing treatment on walls including scraping where ever required and applying two coats of weather proof exterior emulsion paint matt finish paint on brick/concrete wall surfaces over one coat of water base primer complete all as specified and directed.

Dismantling posts or struts (wood, RCC or steel) embedded in cement concrete, brick work, masonary etc. any section including taking out embedded portion and making good disturbed ground with earth as directed.

Excavation post holes (or similar holes) each n.exc 0.5 cum getting out returing filling in and ramming earth on broken rubble mixed with earth arround in layers not exceeding 25 cm thick in soft/loose soil making good complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 (using 20mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L mild steel framed work with angle iron as in posts and struts in fencing including cutting tops to shape, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Supply only MS galvanised chain link fencing including taking down existing fencing complete all as specified and directed. Note: Weight of fencing shall be decided by BOO

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire including dismantling of exsiting fencing complete all as specified and directed.

Supply only mild steel flat, round or square bars for weaving of chain link fencing conforming to Fe-410-W, Gde E-165, quality 'A' including dismantling of exsiting flat iron complete all as specified and directed.

Supply only mild steel bolts, purpose made with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, 16 to 18 mm dia of neck, length of bolts exc. 5 cm but not exc. 10 cm complete all as specified and directed. Note for item No. 15 & 16 : Rate for fixing shall deemed to be included in rates of Srl item No. 13 and 14 above

S&F in repair welded steel wire fabric weight not exc. 4 Kg/Sqm and welded to steel members complete all as specified and directed.

S&F in repair Mild steel framed work such as grills, grating, framed guard bars, stairs (framed) including stringers, treads, landing, balusters, hand rail, cleats, bracktes etc. and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed. .

M&L for repair to iron door shutters/frames by easing or resecuring and adjusting of any description area exc 1.50 Sqm but n. exc 4.00 Sqm each without taking down by cutting, welding the frame/ shutter complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel or iron of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F in repair providing precast cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) in louvers and jallies, 45 mm thick (measured solid), including all mouldings frame but excluding frames including necessary form work, set in cement mortar 1:4 complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for removing demolished material outside defence land complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in copings and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work and demolition of existing concrete complete all as specified and directed.

S&F in repair galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including securing or tyring at crossing with and provision of galvanised mild steel wire, staples or steel pins etc. as specified and directed (each line wire to be measured).

S&F in repair concertina coil of 600 mm dia (in stretched position), hot dip galvanised steel wire coated with CLR anti corrosive paint, making diamond shape with the help of dove tail clips (18 SWG), fixed to the MS angle iron/precast RCC fencing post to be fixed with barbed wire at points where coil touched the bottom with the help of lug rings (24 SWG) complete all as specified and directed.

M&L for washed stone grit plaster on exterior walls in two layers, under layer 12 mm thick in cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square meter, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings including taking down of old plaster complete all as specified and directed. Note : Making grooves(of uniform size 15 mm x 15 mm) shall be included in quoted rates.

S&F pre-painted galvalume aluminium zinc coated galvanised Iron based corrugated steel sheeting 0.5 mm thick, with side lap and end lap of any colour having tensile strength 550 MPA ridges, hips, valley gutters, drip and straight flashing or in roof covering fixed with self taping screws (length & girth as fixed) including including taking down steel sheeting or ridge in roof coverings complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coated galvanised Iron based plain steel sheeting 0.5 mm thick, with side lap and end lap of any colour having tensile strength 550 MPA ridges, hips, valley gutters, drip and straight flashing or in roof covering fixed with self taping screws (length & girth as fixed) including taking down steel sheeting or ridge in roof coverings complete all as specified and directed.

S&F in repair fiber glass reinforced translucent corrugated sheeting 2 mm thick with two corrugation side lap fixed with coach screw and washers in roof. Wall etc. complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like complete all as specified and directed.

Use and waste Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) complete all as specified and as directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for granite stone 18-20 mm thick (of any type) glazed (table rubbed and polished) fixed as in skirting, steps, jambs, pillars, window cills, cooking plateform and the like set in cement mortar 1:4 and pointed with white cement (1:2) using marble dust with admixture of pigment to match and exposed edges rounded with and including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4 complete all as specified and directed.

M&L for fixing in repair 16 to 18 mm thick Dholpur stone cladding gang saw cut with machine cut edges, uniform colour, area of stone exceeding 0.25 sqm but not exceeding 0.5 sqm fixed with and including one number SS clamps (grade -202) of flat 30 mm x 2 mm, 150 mm long made to shape in each slab, making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment over and including 15mm thick rendering in CM 1:4 complete all as specified and directed.

Welding in repairs exc 2.5 cm but nexc 5 cm in length complete all as specified and as directed .

S&F for 1 mm thick MS Plain sheet in hearths ,covering to door shutters, covering to door chawkhats etc. including welding/bending complete all as specified and as directed.

S&F for framed work as in doors or gates of angle,drilled for fixing of steel sheeting or other covering,doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings(exclusive of steel sheeting or other covering,running rails and guides) and hanging also fastening and fixing confirming to Fe-290,Gde E-165 including dismantling of existibg steel structure complete all as specified and as directed .

GIRENDRA SINGH AND CO

M/s Pooran Singh and Company