A/R and M/O Circuit House Building at Parwanoo

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm.complete as per the direction of Engineer-in-Charge including carriaghe of all labour equipments and materials to various location through all modes of transporation in all leads lifts and all incidental charges.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)complete as per the direction of Engineer-in-Charge including carriaghe of all labour equipments and materials to various location through all modes of transporation in all leads lifts and all incidental charges.

Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metre lead. complete as per the direction of Engineer-in-Charge including carriaghe of all labour equipments and materials to various location through all modes of transporation in all leads lifts and all incidental charges.

Providing and laying plain Cement concretre in 1:6:12 (one cement isto six sand isto twelve graded crushed hard stone aggregate 40mm (forty) millimeter nominal size) mechanically mixed, vibrated and curing complete in open foundation and plinth for all type of structure including the cost of form work complete as per drawing and MORD Technical Specification clause 802, 803, 1202 and 1203 (Eight hundred two, eight hundred three, one thousand two hundred two and one thousand two hundred three) or as directed by the Engineer-in-Charge including carriage of materials with in all leads and lifts and other incidentals.

Providing and laying vitrified floor tiles in different sizes (KAJARIA) (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600x600 mm/600x1200mm complete as per the direction of Engineer-in-Charge including carriaghe of all labour equipments and materials to various location through all modes of transporation in all leads lifts and all incidental charges.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Second class teak wood complete as per the direction of Engineer-in-Charge including carriaghe of all labour equipments and materials to various location through all modes of transporation in all leads lifts and all incidental charges.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-incharge. Second class teak wood 35 mm thick shutters complete as per the direction of Engineer-in-Charge including carriaghe of all labour equipments and materials to various location through all modes of transporation in all leads lifts and all incidental charges.

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : Second class teak wood 35 mm thick complete as per the direction of Engineer-in-Charge including carriaghe of all labour equipments and materials to various location through all modes of transporation in all leads lifts and all incidental charges.

Providing & fixing glass panes doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes complete as per the direction of Engineer-in-Charge including carriaghe of all labour equipments and materials to various location through all modes of transporation in all leads lifts and all incidental charges.

Providing and fixing aluminium sliding door bolts, antic color anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :300x16 mmcomplete as per the direction of Engineer-in-Charge including carriaghe of all labour equipments and materials to various location through all modes of transporation in all leads lifts and all incidental charges.