SPECIAL REPAIR OF INTERCONNECTING ROAD BETWEEN AGNIVEER LIVING AREA OF TRG AREA IN THE AOR OF 1 TTR, 1 STC, UNDER GE (WEST) JABALPUR

M&L Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal)but making good by applying tack coat @ 5 kg per 10 sq m with paving bitumem, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cu m of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings)depth of potholes exc 30 mm complete all as specified and directed.

M&L Preparing surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc.on black top surfaces complete all as specified and directed.

Applying evenly a priming/ tack coat with bituminous primer using paving bitumen @ 5 kg per 10 sq metres using mechanical sprayer complete all as specified and as directed.

M&L for bituminous premixed asphaltic semi dense concrete 30mm consolidated thickness with minimum 5.50 % binder content using paving bitumen VG-30 by weight of total mix, rolled and compacted to required camber and gradient using 8 to 12 tonne tandem vibratory roller complete all as specified and directed. Notes:- (i) Bituminous premixed asphaltic semi dense concrete shall be prepared in hot mix plant only. (ii) Bituminous premixed asphaltic semi dense concrete shall be laid with sensor paver only. (iii) Binder content shall be tested at site as directed by Engr-in-Charge.

M&L for premixed bituminous macadam for consolidated thickness upto 75mm or less with using 19mm graded (Grading 2) stone aggregate with minimum 4.0% binder content using paving bitumen VG-30 by weight of total mix, rolled and compacted to required camber and gradient using 8 to 12 tonne tandem vibratory roller complete all as specified and directed. Notes:- (i) Premixed bituminous macadam shall be prepared in hot mix plant only. (ii) Premixed bituminous macadam shall be laid with sensor paver only. (iii) Binder content shall be tested at site as directed by Engr-in-Charge.

M&L for preparation of existing bituminous road surfaces by removing dust, dirt grease and other foreign matters etc and after prepration of road surfaces, applying road marking having minimum 2 mm average thickness with & including thermo plastic (Reflective) line marker paint/ compound of uniform surface finish conforming to BS 3262 (Part-I) 1989 read in conjunction with the MORTH specification 803 clause 4.2.2 on bituminous surfaces in white/ yellow colour and super imposed with glass beads conforming to BS 6088 read in conjuction with the MOST specification 803 clause 4.3.3 complete all as specified and directed. Make of Road Marker Paint/ Compound:- Asian or Thermoline as approved by GE. Notes:- (i) MORTH specification 803 shall be followed strictly for execution of work & suitable machine shall be used for the marking as approved by GE. (ii) Shape, size & pattern of marking shall be as approved by GE.

Supply and fix in repairs cats eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA strip reflector fixed with and incl MS stud of suitable size as per manufactures instruction and to be fixed with Epoxy- Resin based adhesive or Special Hot Melt Bitumen adhesive avoiding nails etc complete all as specified and directed. Make: 3M 290 Series of Road Star or equivalent Model of make- Dark Eye or Green Lite or Sun Lite as approved by GE.

Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed.

M&L for moorum/ red bajri, spread, rolled and consolidated to gradient and camber as required complete all specified and directed. Note:- (i) Compacted thickness shall be measured and paid. Note:- (i) Compacted thickness shall be measured and paid. (ii) Rolling/ compaction shall be done by vibromax roller only.

Supply and Fix in repair, dual directional speed braker having high intensity cube corner reflector ultrasonic welded to high impact resistance ABS plastic body of colour yellow and black(as approved by GE), of size 250mm x 345m x 50mm (height) provided with 4 (four) steel nails, shape of side body to have interlocking pattern to keep all speed brakers in a row complete all as specified and as directed. ( Make : Cat Part No. GPL-07-06 GREENS/GREENLITE or equivalent Make of Dark Eye or Sunlite or road star as approved by GE.)