PROVN OF LAB AT CERTAIN TECHNICAL FACILITIES (T/F) AT AF STATION AGRA

Amount

Taking down door chowkhat with shutter area n.exc 1.5 Sqm each (without taking off shutters from the frame) including making good of jambs with cement mortar 1:4 etc complete all as specified and as directed.

Taking down chowkhats or frames with shutters exc 1.5 Sqm but not exc 4 Sqm each (without taking off shutters from the frame) including making good of jambs with cement mortar 1:4 etc complete all as specified and as directed.

S&F 18mm thick PVC foam board (WPC) of density 600kg/cum both side plain for kitchen cabinet shutter including fixing of 0.8mm thick acrylic laminates as edge banding in matching colour over all exposed edge incl reqd hinges and handles complete all as specified and as directed.

S & F Continuous (piano) hinges (Width of Flaps 40mm), mild steel, bright finish or electro galvanised all as specified and as directed.

S&F 75mm Brass handles, cast type, polished bright all as specified and as directed.

S&F stainless steel finished butt hinges cold rolled medium weight of size 75 mm complete all as specified and as directed

S&F 100 mm long stainless steel finished barrel tower bolt of extruded section complete all as specified and as directed

S&F 100 mm long stainless steel finished handle fabricated type complete all as specified and as directed

S&F Powder coated aluminium anodised frame (minimum thickness of powder coating 50 micron) for doors & Windows, with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F powder coated aluminium anodised (Minimum thickness of powder coating 50 micron) door shutters, aluminium section weighing 0.55 kg/m including necessary aluminium anodised joining cleats, glazing clips, ruber neoprene packing, aluminium anodised handles 2 Nos in each door, aluminium anodised hinges 03 No's, aluminium anodised Tower bolt 02 No's, Powder coated aluminum snap beading, screws etc. complete all as specified and directed.

Providing and fixing factory made uPVC any colour casement (Openable) Door made of extruded profile with wall thickness of 2.3mm ( + 0.2mm). Window profile with hollow section with multi chambered, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + 0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) and 8mm thick toughened glass etc complete all as specified and directed by Engr in Charge. Note- rate quoted by contractor shall include, the cost of 8 mm thick toughened glass and other connected accesseories.

S&F for Powder coated aluminium anodised (Minimum thickness of powder coating 50 micron) window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary aluminium anodised joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed

S&F for powder coated aluminium wall partition (minimum thickness of powder coating 50 micron) work for partition (fixed portion) with extruted built up standerd tubular section / appropriate Z section and other section of approved make conforming to IS 733 and IS 1285 fixing with dash fastners of required dia and size including necessary filing up the gaps at junction ie at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. aluminium section shall be smooth, rust free, straight,mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / panelling, CP brass/ stainless steel screws etc complete all specified and directed by Engr in Charge.

S&F for aluminium anodized powder coated grills made out by using 6 x 5 mm aluminium section having square gap of 50 mm thick with fixing rails of channels 12-15 mm etc complete all as shown in design Cat Part No -DG 101-DG-102 of jindal or equivlement as approved by GE.

S&F 5.5mm thick sheet glass black ordinary quality for Aluminium framed partition fixed with aluminium anodised cleat and rubber beading area in each pane area n.exc 2.00 sqm etc complete all as specified and directed

S&F 12mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations for partition etc, complete all as specified and as directed.

S&F in repair venetian blinds in double layers roller type of approved colour including all accessories, fitting/fixtures required for fixing the same in windows complete all as specified and as directed.

M&L brick work with fly ash bricks, straight of curved on plan exc 6M mean radius built in CM 1:6 complete incl demolition of existing brick work built in cement mortar complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding and removing rubbish off the premises complete all as specified and directed

M&L for 25 mm thick PCC 1:2:4, type B0 (using 12.5 mm graded stone aggregate) as in flooring for leveling course complete all as specified and directed

M&L for 18 to 20mm thick Granite work (table rubbed and polished ) of Lakha Red or Telephone Black colour for shelves,counter slabs, floors etc including 15mm thick backing of CM (1:4) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including demolition of (terrezo/ PCC/granite of any description) and removing the rubbish from the site complete all as specified and as directed.

M&L for 18 to 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete

M&L for glazed ceramic coloured tiles 350x450mmx7mm thick on wall/vertical surfaces such as skirting, dados and riser to steps etc laid over and including 10mm thick rendering in CM 1:4 finish set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified & directed.

S&F 1000 Ltrs capacity PVC Rotational Moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layer hoisted and fixed in position complete all as specified & directed.

S&F 20mm bore ball valve high pressure of PTMT with epoxy coated alluminium rod and high density plastic ball secrewed for iron pipe and fixed . ( Minimum wt 15 mm - 142 gms/20 mm - 210 gms) complete all as specified & directed.

S&F 15mm bore Galvanised steel tubes, 'medium grade' with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed .

S&F 20mm bore Galvanised steel tubes, 'medium grade' with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed .

S&F sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F 15mm dia stop valves , fancy type chromium plated, screwed down, screwed both ends for iron pipe or for unions and fixed. complete all as specified and directed .

Supply & fixing 15mm pillar taps swan neck cast copper alloy, with capstan heads, chromium plated, screwed down , high pressure, with or without lettered 'Hot' or Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed. Bore of pipe in 15mm complete all as specified and directed .

S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified & directed.

S&F in repair PVC (SWR) pipes 160mm dia single socketed, in any length with rubber ring joints, fixed on walls or floors complete all as specified and as directed

S&F in repair PVC (SWR) plain bend 160 mm dia, of any radius with rubber ring joints, complete all as specified and as directed

S&F cast iron floor trap 100mm out let dia with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified & directed.

S & F 100 mm dia bore PVC (SWR) pipes single socketed , in any length with rubber ring joints , laid in tenches or in floors complete all as specified & directed.

S & F 100 mm dia bore PVC (SWR) bends any radius complete all as specified & directed.

S & F 100 mm dia bore PVC (SWR) junction single 'T' equal or unequal complete all as specified & directed.

S & F of 20 mm dia Aluminium anodised tubular towel rail including one pair of fixing brackets complete all as specified and directed.

Taking down cement / lime plaster of any description on brick work or stone walls etc including racking out joints hacking for key scrubbing down with water etc.complete all as specified and as directed

M&L for rendering 10 mm thick on brick or concrete surface of walls in cement mortar 1:6 finished even & smooth without extra cement on internal wall surface complete complete all as specified & directed.

M&L for rendering 15 mm thick on brick or concrete surface of walls in cement mortar 1:4 finished even & smooth without extra cement mixed with water proofing compound @ 3% by weight of cement or as per manufacturer instruction on external wall complete all as specified & directed.. Note:- WPC will be measured & Paid separately

Supply only integral water proofing compound (ISI Marked)

M&L for preparation of newly plastered surfaces and applying two coats of oil emulsion distemper white or tinted over a coat of wall care putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and primer complete all as specified and directed.

M&L for preparation of old surfaces of steel exc 10cm width or girth and applying Two coat of synthetic enamel paint complete all as specified and as directed .

S&F Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified & directed.

Taking down carefully aluminium/copper point wiring (light/fan/socket or power) complete including fitting fixtures such as switches, socket, ceiling rose, brackets, holders, bulk head/tube light fitting etc. and removing materials from site and making good disturbed surface of walls/ floors etc. complete all as specified and directed

M&L for taking out the ceiling fan and deposited to MES Store all as specified and directed BY engineer in charge.

Taking down main switch/ MCB DB/bus bar of any type/capacity by disconnecting the electric supply complete all as specified and directed

M&L for point wiring for One light / fan point controlled by one switch complete with stranded copper conductor 1.5 Sqmm size (Nominal area) PVC insulated unsheathed cable FRLS in and including concealed PVC conduit ISI marked not less than 20mm dia with concealed sunk in pressed steel terminal boxes of reqd size of thickness 1.6 mm factory made and painted with stove enameled black paint with top cover 3mm thick plastic laminated sheet of required colour fixed with brass screws and cup washer including 1.5 sqmm stranded copper conductor FRLS PVC insulated cable of green colour as earth continuity connected to common earth dolly and all sunk/terminal boxes and each fitting/fixture, complete with all accessories all as specified and directed: -

All as per serial item No 50 above for one bell / buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5sqmm size all as specified and directed.

M&L for electric call bell AC, 230V single pole all as specified and directed.

M&L for bell push , flush type, 5 AMP all as specified and directed by Engineer in charge

M&L for point wiring complete with stranded copper conductor 2.5 Sqmm size (Nominal area) PVC insulated unsheathed cable FRLS in and including concealed PVC conduit ISI marked not less than 20mm dia with concealed sunk in pressed steel terminal boxes of reqd size of thickness 1.6 mm factory made and painted with stove enameled black paint with top cover 3mm thick plastic laminated sheet of required colour fixed with brass screws and cup washer including 2.5 sqmm stranded copper conductor FRLS PVC insulated cable of green colour as earth continuity connected to common earth dolly and all sunk/terminal boxes and each fitting/fixture, complete with all accessories all as specified and directed.

M&L for flame proof switch socket & plug combined point controlled by single pole one way 16 Amp ON-OFF rotary switch. Flame proof switch socket & plug combined in LM6 cable termination box in LM6, 16A, 250V, 2P + earth complete all as specified and directed.

S&F in flame proof weather rotary switch with cable terminal box in cat aluminum alloy ( LM-6) construction, epoxy powder coated, single pole 16 Amp ON/OFF type, 230 V AC, certified by CMRS for Group IIA & IIB complete including compression glands all as specified and directed.

S&F fluorescent tube light fitting 2x20W flameproof type FLP-WP made of aluminium alloy LM6, with electronic ballast, bipin holders, connector block, etc. complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed .

M&L for flame proof weather proof Wall mounting fan 457(18") mm sweep, 230 Volt, AC 1440 RPM with suitable size of super enameled copper winding wire as per existing/ original specification of wall mounted fan including proper insulation with varnish etc and testing on full load complete all as specified and directed.

Supply and fix flame proof exhaust fan 305 (12") mm sweep (heavy duty) single phase 220/230 volt AC 1440 RPM, with louvered shutters including mounting frame, nut, bolts, washer, fastners etc and connecting exhaust fan to ceiling rose including provision of three core flexible copper cable of size 1.5 sqmm not less than 0.5 mtr long for connection complete with fixing arrangement and all as directed and specified .Make-SHUDHIR switch gear/bajaj or Equvallent ISI marked product as approved by the GE.

Supply, install commissioning and testing of Air curtain fully automatic 3 feet long with max velocity 23/18 m/s dual speed AI chassis with CRC plates unit for prevention of dust and conditioned airlosses, single phase, 220V, 50HZ, madeout MS / CRCA of minimum thickness 18 gauge finished with two coats of red oxide primer and final coat of synthetic enamel paint (oven baked) with MS CRC 18 gauge square perforated suction grills, Aluminium alloy fans and single phase electric motor, nozzles etc, complete with fittings and accessories all as specified and directed by engr in charge.

Supply and fix air curtain sensor operates via infrared magnetic or door contact sensors for fully automatic air curtain complete all as specified and directed by engr in charge.

S&F in provision of sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 4.0 sqmm drawn in and including PVC rigid conduit not less than 20mm dia with its accessories, surface type, including one run of single core FR PVC insulated, unsheathed, mutistranded copper conductor cable of size 4.0 sqmm as earth continuity and connected of common earth dolly complete all as specified & directed. Note:- Two runs of 4.0 sqmm cable & one run of 4.0 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid one unit length.

Supply and fix flame proof weather proof explosion proof split type air conditioner, 5 Star suitable for 1.5 TR operating voltage 230v/440v, AC, 50 Hz including condensing unit, cooling unit and flame proof control panel and all connected items and accessories all as specified and directed.

Supply and fix flame proof weather proof explosion proof split type air conditioner 5 Star suitable for 2 TR operating voltage 230v/440v , AC, 50 Hz including condensing unit, cooling unit and flame proof control panel and all connected items and accessories all as specified and directed.

Supply and fix flame proof weather proof air compressor with pressure regulator and moisture seperator HORIZON Air compressor air delivery 14.5 CFM, Working pressure 12kg/cm2 powered by 5 H.P. 415v 3 phase including anti vibration pad of Make- ELGIMODEL TS05 LB-12TM or other equilent as approved by the GE.

Supply and fix Laboratory Incubator ,Explosion Proof spark free dynamic cooling and digital temp display equipped with lockable door to maintain temp from 20 to 100 degree celcious of capacity 43L voltage 220 to 230v Make Hi- tech lab products model no HTLP-018 or other equilent as approved by the GE.

S&F factory made sheet metal enclosure 415 volts, 12 ways with 250A rated bus bar, VTPN DB, double door type IP-43 suitable for I/c as MCCB and outgoing as MCB/Isolators and fixed the same on & including mild steel hold fasts of suitable size & shape after grouting the hold fasts in the wall with and including PCC (1:2:4) type B1 using 20mm graded stone aggregate complete all as specified & directed.

Supply & fix MCB, SP, AC, 240 volts of 06 to 32 Amps capacity "C" series and making connections complete all as specified & directed.

Supply and fixed MCCB four pole with enclosure, 415 volts, 160 Amps with breaking capacity 16KA complete all as specified & directed.

Supply, laying commessioning, testing of XLPE , armoured heavy duty electric under ground LT cable 1100 volts grade of size 35 Sqmm 3.5 core with aluminium conductor conforming to IS 1554, laid in tranchies, fixing on wall, under road crossing, etc complete all as specified and directed.

M&L for earthing complete with Copper plate electrode of size 600mmx600mmx3.15 mm thick buried directly in ground (earth pit not less than 3.00 meter deep below ground level with top edge of the plate not less than 2.25 meter below ground level connected to copper strip of size 20 X 3 mm as earthing electrode by means of bolts, nuts check nuts and washers of galvanised iron or steel connected to earthing test point including with new test point of made by gunmetal ot bronze complete all as specified incl excavation and earth work and disposal of surplus soil incl 40 mm GI tubing light grade and necessary fitting for protection of copper strip incl laying of charcoal dust and common salt, PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) as in earth pit with 40 x 40 x 6 mm MS Angle iron frame of required size 40mm thick and pit cover of well dressed dholpur stone 40mm thick 40x40m size with providing handle in center by ,aking hole and handle made by 12mm MS Rod in round/rectangle shape of handle of 100mm grip, 15mm thick plastering with CM (1:6) internally and upto 150mm below ground level externally, PGI funnel with 20mm dia medium grade GI pipe for watering and wire mesh complete all as specified and shown on electrical plate No 3 of SSR Part-I (2020) and connected to earth test incl testing complete all as specified and directed. Note (i) Copper strip/ GI Strip and protection light grade GI pipe upto 7.5 meter shall be deemed to be included in the quoted rates. (ii) The earthing value of each earthing pit to be below 1 Ω (Ohm). (iii) Excavation and all earth work shall be deemed to be included in the unit rates as quoted by the contractor.

M&L for earthing in renewal of complete with galvanised steel plate electrode 600mmx600mmx6mm thick buried directly in ground (earth pit not less than 2.25 Mts deep below ground level with top edge of the plate not less than 1.50 Mtrs below ground level connected to glavanised iron wire of size 4 mm by means of bolts, nuts check nuts and washers of galvanised iron or steel connected to earthing test point all as specified incl excavation and earth work and disposal of surplus soil incl 40 mm GI tubing light grade and necessary fitting for protection of copper strip incl laying of charcoal dust and common salt PCC (1:2:3) type C-1 using 20mm graded stone aggregate earth pit with 40x40x6mm MS angle iron frame, RCC cover 40mm thick (1:2:4) type B-0 using 12.5mm graded stone aggregate reinforced with 6 mm dia round bar @ 75mm C/C both ways with MS handle 12mm dia, plastering 15mm thick CM (1:6) internally and upto 150mm below ground level externally, PGI funnel with 20mm dia GI pipe for watering and wire mesh complete all as specified and shown on electrical plate No 3 of SSR Part (2009) and connected to earth test incl testing complete all as specified an directed. Note (i) Copper strip/ GI Strip and protection light grade GI pipe upto 7.5 meter shall be deemed to be included in the quoted rates. (ii) The earthing value of each earthing pit to be below 1 Ω (Ohm). (iii) Excavation and all earth work shall be deemed to be included in the unit rates as quoted by the contractor.

Fire alarm control panel complying with BS EN 54 Single loop panel of capacity from 99 detectors & 99 modules upto 200 detector and module complete all as specified an directed.

S&F addressable type multisensor detector with heat and smoke combination Complying with and type certified to EN - 45 addressable type smoke detector Photoelectric /Optical with base with self built intelligence as per IS: 11360 complete all as specified an directed.

S&F Remote response indicators complete all as specified an directed.

S&F Fire Alarm hooters / Sirens electronic type horizontal two stage continous normal operation for at least 50 minutes with sound level 65 db to 120 db Measured at 1.5m with sound output Variation of + 5db, 1000m range for warning of fire connected with central control panel installed in each zone inside the rooms complete all as specified and directed

S&F Rigid non-metallic PVC conduit exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. of external dia 20mm complete all as specified an directed.

S&F rigid non metalic PVC Junction boxes (1 to 4 way) for 20MM external dia pipe complete all as specified an directed.

Supply and drawing of PVC insulated FRLS single core multi stranded copper conductor cable (ISI Marked) of 1.5 Sqmm size drawn in to conduit complete all as specified an directed.

Supply and laying the FRLS armoured with steel wire or strip fire alarm control cable PVC sheathed copper conductor of size 1.5 sqmm 2 core complete all as specified an directed.

M&L for double compression stainless steel gland for fixing armoured cable in panel of size up to 6 sqmm 2 core complete all as specified an directed.

deva engineers (BID ID -3411336)

GIRENDRA SINGH AND CO (BID ID -3416255)