WBPWD/EE/JED/eNIQ42/2023-24

Amount

Supplying & delivery of one number 1.1kv grade XLPE insulated & PVC sheathed aluminium conductor cable(Armoured) conforming to IS: 7098/1988 with its latest amedment of following size

4 core 185 sqmm [From Gloster cat]

4 core 150 sqmm [From Gloster cat]

4 core 95 sqmm [From Gloster cat]

Laying of one No. cable above 35 sqmm and upto 185 sqmm in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :

4 core 185 sqmm

4 core 150 sqmm

4 core 95 sqmm

S&F compression type gland complete with Brass Gland, Rubber Rings for dust & moisture proof entry of cables incl. finishing the ends by crimping method incl. S & Fixing Dowells solderless socket, tapes and terminating materials as follows;-

4 core 185 sqmm

4 core 150 sqmm

4 core 95 sqmm

Supply & Delivery of 8.5 Mtr Steel Tubular Pole (Zindal /Bansal/Tata) as per specification Type 410 SP -19 as overall length 8.5 mtr weight 109 kg. & having diamention are : Out side dia & thickness of the Bottom section ( 139.7x4.50) mm; Middle;(114.3x3.65 ) mm , Top Section (88.9x3.25 ) mm with fixing the base plate and GI earth bolt after making drilled holes etc. on pole incl. jacketing arrangement if reqd. as per direction of EIC

Erection of Single Steel tubular pole of 8.5 mtr. length with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly as per GS

Extra, for providing CC (6:3:1) base block (around the pole) dimension 0.60x0.60x0.76 mt. above ground level, neatly cemented finish (3 mm thick), at the base pole (in lieu of CC muffing) incl. drilled hole in pole suitable for alkathene/polythene pipe entry, for street light wiring, without Loop Box

Supplying & Fixing PVC waterproof type looping cable box(SINTEX/As per EIC) size minimum 200x150x100 mm deep comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, two provision of compression type brass cable gland for upto 4- core 16 sqmm PVC/A cable and having lined with rubber gasketted top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole, including S&F 40x6 mm thick, suitable "C" type 4mm thick MS clamps with bolts, nuts etc. including painting with anticorrosive paint.

Supply & fixing of suitable size MS pole cap on the top of the pole as per the direction of EIC

Supply & fixing of 40 mm dia PVC pipe in CC muffing for cable entry at the bottom of the pole as per direction of EIC

Supply & Fixing of 250 V. 72 WATT. green line LED fittings complete with all accessories street light luminaire with single piece die cast alluminium housing and heat resistance toughened glass IP 66 protection out door luminaires ((make: Phillips cat. No.- BRP032 LED 70 CW MR PSU GR DX/ CG EQV) / equivalent of Bajaj/CG) incl. fixing the fittings on the top of the pole.

Fixing outdoor type fluorescent/SV/MV light fitting on pole including S&F 40 mm dia x 1.68 mts. long GI Pipe (ISI-Medium) bracket with 40 mmx10 mm thick, MS clamp etc. and providing wiring with 2x1/1.40 PVC insulated and sheathed wire (single core) from loop box at the base of pole to light fiting through pole & bracket (without control switch) including making connections & painting

Supply and delivary of following cables

4 core x 16 Sq. mm. XLPE /PVC, Al armoured cable

a.1.1 KV 2core 4 sqmm XLPE /PVC Aluminium armoured cable.

Laying of following size cable in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed( Havells/ Approved make ) as per direction of EIC

Supplying and fixing following compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables

4 core x 16 Sq. mm. XLPE /PVC, Al armoured cable

a.1.1 KV 2core 4 sqmm XLPE /PVC Aluminium armoured cable.

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :

4 core x 16 Sq. mm. XLPE /PVC, Al armoured cable

a.1.1 KV 2core 4 sqmm XLPE /PVC Aluminium armoured cable.

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required.

40 mm dia

S&F 50 mm. dia 1.5 mtr. long detachable type G.I. Single arm bracket, suitable for pole head. The arm bracket shall be properly welded with 15 mm. thick stifner plate of pole sleeve for strengthening incl. properly fixing arrangement with the pole by bolts, nuts and washer as per direction of EIC.

Painting of Steel Tubular Pole of 8.5 mtr length and no. of coats of paint, with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint Upto 8.5 mtr. long pole i)1st coat of synthetic paint over 1 coat of RO priming, II)2nd coat of synthetic paint over 1st coat

Painting of Steel Single arm bracket of 1.5 mtr lengths and no. of coats of paint, with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint. i)1st coat of synthetic paint over 1 coat of RO priming, II)2nd coat of synthetic paint over 1st coat

S& drawing from loop box to fitting by 3x1.5 sq. mm PVC insulated copper wire (Finolex 'FR') through MPVC/3mm thick Polythene pipe.

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level(TATA-Medium)

Excavation of soil for installation of Earth Electrode and filling & ramming.(morrum soil)

Connecting the equipments body to earth busbar including S & F 25 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc.

Boaring for road crossing for laying cable as & when required

S & Installation of Feeder pillar box of suitable size made with 5mm MS plate having front & back opening hinged with door handle and double locking arrangement with Godrej lock and keys. There should be proper ventilation spout at the centre of the top side. The pillar box should be erected over suitable brick structure with plaster and neat cement finish and to be painted by two coats of paints over two coats of primer. The pillar box should be provided with following incl. S&F switches, necessary connection etc. as required. 1) S & F 415V, 63A ,TPN Main switch (L&T)---1no. 2) S & F 415V, 100A,4 Bar Copper BBC---1no 4) S & F Time switch GIC make type FM quartz----1nos 5) S & F 3-Pole power contractor L & T Make ,(ML-3)-1nos 6) Auto/Manual Toggle switch ---1nos 7) Diode type neon Indicator Lamp-3nos

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment

6Way(MAKE Legrand/Crabtree/l&t/siemens/Standard)

Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment

Up to 160A 8Way(MAKE Legrand/Crabtree/l&t/siemens/Standard)

Supplying and fixing 415 V Four Pole 125A MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection(MAKE Legrand/Crabtree/l&t/siemens/Standard)

Supplying and fixing 415 V 63A MCB Isolator on din rail of existing DBs and necessary connection.(MAKE Legrand/Crabtree/l&t/siemens/Standard)

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection(MAKE Legrand/Crabtree/l&t/siemens/Standard)

6-32 A SP MCB

63A TP MCB

Supplying and fixing 415V, TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating.

Supplying & fixing 415 V, 315 A sheet metal (16 SWG) Iron Clad Busbar chambers on angle iron frame on wall having 4 x 50x10mm Dimension of Al. bars [85mm long] and Dimension of Sheet Metal Box is 500x150mm, incl. earthing attachment

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required 4x126/0.4 (16 sqmm) + 2x80/0.4 (10 sqmm) as EC

Dismentling of old electrical equipment (i.e Mainswitches,BBC,DBs etc) from Hospital and submit the same to JE Chember

Supply & fixing LED Sign Board made of 4 mm thick ACP (exterior) sheet (make-Alludecor/Apex) finished with approved metallic colour as back ground (approved by department) to be fixed on MS structure. The all side fabricated with 25 mm Al angle as border and 20/25 mm square bar with required fixing arrangement as frame.---24'X6' 01 no at buildings (as per direction of EIC)

Supply & fixing LED Sign Board made of 4 mm thick ACP (exterior) sheet (make-Alludecor/Apex) finished with approved metallic colour as back ground (approved by department) to be fixed on MS structure 6" coverage at all side for LED board---- 02 no (as per direction of EIC)

S&I M.S. C Channel structure with 4 nos 50x50x6 M.S.angle of suitable length along the sign board frame and making jigjag shape with 25x5 MS flat in between the MS angle frame by welding, also making 4 nos hinges on four corners of MS angle frame by welding 50x50x6 MS angle of suitable length including the same will be duly welded on 50X50X6 2 nos.MS angel of suitable length which are rigidly fixing by first nut on gate pillar and mending good damages & fixing the board with the above M.S. angle frame by Supply & fixing nut, bolts, washers etc. as per direction of E.I.C. (Frame size 24'X6') (incl painting charges).

Supply & Fixing special type of imported solid Acrylic letter (thickness 3mm, raised 1.5 inch above ACP)fixed on 3 mm thick acrylic sheet.All side each letter glows or emits light, fixed on ACP sheet by brass/SS nuts & screws after drilling & machining. content will be given by EIC. National Emblem size 10" =1no In 1st Row 20 nos (approx) Letters of size 12” , 2nd Row 48 nos (approx) letters of size. 10” (incl stop and comma)

Supply & Fixing of LED inside the letters on metallic board. The Specification of LED light is given below : a) LED modules are to be fixed on Sign Board (behind letters). b) Life: 50000 burning hrs. c) Intensity : same & smooth, throughout, no bright or light or dark patches d) Visibility: 150 metres for normal eye. e) Power supply: 12 Volt DC f) Ambient of Air: 0-50C, 100% relative humidity. Including adequate nos. of LED drivers Make:- Samsung Korea with all necessary connection. (OEM test certificate in original is to be submitted to EIC before execution of work) [NS]

Supplying and fixing 240V 32A Sheet steel DP Main Switch on flat iron frame on wall. (Havells make) for compound light. {D-1/1(a)}

S&F angular batten holder ( Anchor) incl. S&F 18 wt LED lamp (PHILIPS)

S&drawing 1.1 kv single core stranded FR PVC insulated &unsheated single core stranded cupper wire (approved make)of the following sizes prelaid poly pipe.& by the GI fish wire & making necy connection as required

3x22/0.3(1.5 sqmm) [E-9/C(1)(b)]

Supplying & delivery of one number 1.1kv grade XLPE insulated & PVC sheathed aluminium conductor cable(Armoured) conforming to IS: 7098/1988 with its latest amedment of following size

4 core 185 sqmm [From Gloster cat]

2core 10 sqmm XLPE/A, Al cable [From Gloster cat]

Laying of two cables upto 35 sqmm in an underground trench in single tier formation (horizontal), the trench size : 680 mm x 760 mm average depth, with brick protection on the top of each cable 8 (eight) Nos. bricks per Mtr. and 4 (four) Nos. bricks per Mtr. as separator between the bricks and cables and also trench to be filled up with shifted soil, levelling up and restoring surface duly rammed.

2core 10 sqmm XLPE/A, Al cable [F-2/2a]

Laying of following cable upto 2 core 25sqmm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting

2core 10 sqmm XLPE/A, Al cable [F-1/2a]

Laying of one cable above 150 sqmm and upto 300 sqmm through existing covered masonery trench incl. Taking out RC covers , mending good the damages filling the trench dry sand incl, supply sand.

4 core 185 sqmm [F-3/4(b)]

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :

4 core 185 sqmm [F-5/8(b)(xxi)]

2core 10 sqmm XLPE/A, Al cable [F-5/8(b)(iii)

S&F compression type gland complete with Brass Gland, Rubber Rings for dust & moisture proof entry of cables incl. finishing the ends by crimping method incl. S & Fixing Dowells solderless socket, tapes and terminating materials as follows;-

4 core 185 sqmm [F-4/7©]

2core 10 sqmm XLPE/A, Al cable [F-4/7(a)]

S & Fixing single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. [C-2/17]

Make Philips Cat no TMC 501 P 1xT-LED 22W P3241 [From Philips Cat]

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Piano key type switch (Anchor make) fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish (2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC) Average run 6 mtr

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box and mending good the damages to original finish On board .

a )on board [E-15/4(a)]

b )Average run 4.5 mtr [E-15/4(d)]

Supplying & Fixing of Box type fan clamp of 150mm dia & 80mm depth made of 16 SWG CRCA sheet with one end duly sealed by cover, properly welded, incl. S&F 12mm dia 600mm long MS rod duly bent by heat treatment at the centre position of rod to grip fan bobbin properly, incl. binding the rod and fan box with reinforcement by 22 SWG steel binding wire, incl. supplying & covering the box with alkathene sheet, placed in order to prevent concrete from entering the box. [D-14/31]

S&F 230V 400wt Electronic step socket type fan regulator and making connection( Brand Approved by EIC)

S& Fixing 240V 50 Hz 48" sweep (1200 mm) ceiling fan complete with down rod,Canopy,fork etc.(Make- USHA-StrikerPlus / Approved) and Fixing the ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by3x1.5 sqmm single core stranded pvc insulated unsheathed copper wire ..(Make: Crompton Greaves /orient new brize ) [From Usha Cat]

Earthing the installation by 2" ( 50 mm) dia ISI (M) GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level & restoring surface duly rammed as per G.S. in morrum soil. [G-1/2(a)]

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required as per G S [G-2/4(a)]

S & fixing of 120 watt LED Outdoor luminaries for road lighting. Make: Crompton Cat: No: TRP-411-120-57-SL-GL-NSG/ Philips/ Bajaj (As per choice of EIC) .

Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint up to 9 mtr pole .

a) 1st coat of aluminium paint over 1 coat of RO priming .

b) 2nd coat of aluminium paint over 1st coat .

Erection of Single Steel tubular pole of 9 mtr. length with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly as per GS

Providing CC (6:3:1) muffing 600x600x760 mm in size or equivalent size of cylindrical muffing above ground level around the pole base complete with 3 mm thick neatly finished cement plaster all round after dismantling the unserviceable muffing if necessary Wihtout Loop Box

Inter connection of water proof type Loop box( by 2 x 1.5 Sq. mm. PVC insulated copper wire from loop box with best quality PVC pipes as per direction of EIC

S & fixing of 20 watt LED Outdoor luminaries for Gate lighting. Make:CG. Cat: No: LPTH-20-CDL incl.on 2" dia GI pipe ISI medium..(From Crompton cat.)

Supplying and Fixing GI water proof looping cable box having hinged GI Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. of the following sizes as indicated below, Comprising of one 250 V, 15 A Kit-Kat fuse unit, one NL on porcelain insulator etc. and housing the same in pole muffing incl. addition and alteration to the existing CC muffing (6:3:1) after dismantling the damaged looping cable box etc. where necy. incl. painting

250 x 250 x 100mm [I-2/16(b)]

Supply & installation of 8.5 Mtr. long heavy gauge S.T pole (410-SP-20) having M.S. sole plate welded with drilled hole at bottom of the pole incl. providing CC (6:3:1) base block (around the pole) dimension 0.60x0.60x0.76 mt. above ground level, neatly cemented finish (3 mm thick), at the base pole (in lieu of CC muffing) suitable for alkathene/ polythene pipe entry as directed for street light wiring, incl. Supply & fixing 50mm Dia 2mtr long detachable type GI single arm bracket(at an angle 105 degree to pole), suitable for the pole head.The arm bracket shall be properly welded with 15mm thick stifner plate of pole sleeve for strengthening including properly fixing arrangement with the pole by bolt , nut, wahser (complete set) as per direction of EIC (NS)

S & Fixing medium gauge GI pipe (ISI-M) protection with nes. Fittings as required.

50 mm dia GI pipe. [F-6/11(d)]

S & Fixing DECORATIVE LIGHT hanging from celling of the building [NS]

S & Fixing DECORATIVE LIGHT on wall. [NS]

supply installation , testing & commissioning of high performance, fully digital, 3phase input & single phase output & microprossesor based UPS syestem with 30 min. Backups in build isollation transformer, open battery rack & battery interconnectings cables. UPS model :- VII181103027 Type - HPM Total battery- 24 nos Type :- SMF Battery make- Exide or AMARAJA

10 KVA UPS (3phase in / single phase out)

Supply & drawing 1.1 KV single core standed FR PVC insulated & unsheadhed single core standed copper wire in 25 mm size PVC rigid conduit on wall surface. 4X16 sqmm +2X10sqmm as ECC for UPS connection.

Supply of outdoor BOLLARD light fittings 250 v 10 watt ( Crompton make) Cat no. LBLA1-10-CDL

Fixing of BOLLARD light fittings On RCC structure(200X200X400 mm ) with necessary interconnection ,polythene pipe with connecter by incoming & outgoing cable & fittings .

S & installation of three phase Timer DB comprising of 2+12 way SPNMCBDB ( Conceled in wall) , 63 A FP MCB , analog time switch ,63 A FP power contactor , 25 A MCB change over with suitable interconnection . ( Make: Crabtree/ABB/ L&T)

Supply and delivary of following cables

4 core x 16 Sq. mm. XLPE /PVC, Al armoured cable

a.1.1 KV 2core 4 sqmm XLPE /PVC Aluminium armoured cable.

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed

Supplying and fixing following compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables

4 core x 16 Sq. mm. XLPE /PVC, Al armoured cable

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :

4 core x 16 Sq. mm. XLPE /PVC, Al armoured cable

a.1.1 KV 2core 4 sqmm XLPE /PVC Aluminium armoured cable.

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required

32 mm dia

Supply & Delivery of 8.5 Mtr Steel Tubular Pole (Zindal /Bansal/Tata) as per specification Type 410 SP -19 as overall length 8.5 mtr weight 109 kg. & having diamention are : Out side dia & thickness of the Bottom section ( 139.7x4.50) mm; Middle;(114.3x3.65 ) mm , Top Section (88.9x3.25 ) mm with fixing the base plate and GI earth bolt after making drilled holes etc. on pole incl. jacketing arrangement if reqd. as per direction of EIC

Erection of Single Steel tubular pole of 8.5 mtr. length with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly as per GS

Extra, for providing CC (6:3:1) base block (around the pole) dimension 0.60x0.60x0.76 mt. above ground level, neatly cemented finish (3 mm thick), at the base pole (in lieu of CC muffing) incl. drilled hole in pole suitable for alkathene/polythene pipe entry, for street light wiring, without Loop Box

Supplying & Fixing PVC waterproof type looping cable box(SINTEX/As per EIC) size minimum 200x150x100 mm deep comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, two provision of compression type brass cable gland for upto 4- core 16 sqmm PVC/A cable and having lined with rubber gasketted top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole, including S&F 40x6 mm thick, suitable "C" type 4mm thick MS clamps with bolts, nuts etc. including painting with anticorrosive paint.

Supply & fixing of suitable size MS pole cap on the top of the pole as per the direction of EIC

Supply & fixing of 40 mm dia PVC pipe in CC muffing for cable entry at the bottom of the pole as per direction of EIC

Supply & Fixing of 250 V. 72 WATT. green line LED fittings complete with all accessories street light luminaire with single piece die cast alluminium housing and heat resistance toughened glass IP 66 protection out door luminaires ((make: Phillips cat. No.- BRP032 LED 70 CW MR PSU GR DX/ CG EQV) / equivalent of Bajaj/CG) incl. fixing the fittings on the top of the pole.

S&F 50 mm. dia 1.5 mtr. long detachable type G.I. Single arm bracket, suitable for pole head. The arm bracket shall be properly welded with 15 mm. thick stifner plate of pole sleeve for strengthening incl. properly fixing arrangement with the pole by bolts, nuts and washer as per direction of EIC.

Painting of Steel Tubular Pole of 8.5 mtr length and no. of coats of paint, with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint Upto 8.5 mtr. long pole i)1st coat of synthetic paint over 1 coat of RO priming, II)2nd coat of synthetic paint over 1st coat

Painting of Steel Single arm bracket of 1.5 mtr lengths and no. of coats of paint, with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint. i)1st coat of synthetic paint over 1 coat of RO priming, II)2nd coat of synthetic paint over 1st coat

S& drawing from loop box to fitting by 3x1.5 sq. mm PVC insulated copper wire (Finolex 'FR') through MPVC/3mm thick Polythene pipe.

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level(TATA-Medium)

Excavation of soil for installation of Earth Electrode and filling & ramming.(morrum soil)

Connecting the equipments body to earth busbar including S & F 25 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc.

Boaring for road crossing for laying cable as & when required

RAJESH SINGH

S. A. ENTERPRISE