Over Hauling of points & crossing under SSE/P.way/BTJL section( E file Computer No-69304)

SWRUSSOR-2022-ITEM NO.- 063100-Removing seized ERC from SGCI inserts of existing track by using suitable approved chemicals and re-fixing after greasing of insert eye and 1 ERC with Contractor's grease of specified quality as per provisions of IRPWM, as directed by Engineer in-charge. Note:1.List of Seized ERC along with location shall be prepared after inspection of SSE/P.Way and marked prior to execution of this item. 2. Due care shall be taken to avoid any damage to the sleeper 3.A penalty of 50% of the basic cost of new sleeper in nearest sleeper factory shall be levied on each, if SGCI insert is broken or sleeper gets cracked in the process.

SWRUSSOR-2022, ITEM NO-137020-Anti-corrosive painting of rail on running track of any sleeper density on web, foot etc. including liner contact area (excluding bottom of foot) and fishing plane as per requirement with two coats of thickness of 100 microns each by bituminous black paint confirms to IS-9862 of reputed make including painting of liners, ERCs and including surface preparation, as a complete job as per procedure prescribed in latest edition of IRPWM Note: 60% of payment shall be made if painting on only gauge face side is done. Above/

Removal of corroded/seized bolts and nuts in yard and in mid section. Above/

Overhauling of point and crossing 1 in 12 or 1 in 8 ½ duly removing all fittings and fastenings with or without traffic blocks, cleaning, greasing and re fixing etc as directed including all 1 bolt nuts, crossing blocks, check rail blocks, heel block, K clips, washers, fish plates, T- Bolts, ERC, liners, rail screw etc. Note: Missing/Damaged fittings i.e, bolt nuts, crossing blocks, check rail blocks, heel blocks, K clips, washers, fish plates, T-bolts, ERC, liners, rail screw and grease etc. shall be supplied by KRCL.(UNIT CODE-Per Set)

Item Breakup - 1-Schedule-A

TRM Total 115016.00