SPACIAL REPAIR TO BUILDING NO N-44 AT OAC AND CERTAIN B/R WORKS NEAR HRDC AT OLD AMRITSAR CANTT

Amount

Taking down cement plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water etc ; Complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:6 finishing even and smooth without using extra cement ; Complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4 finishing even and smooth without using extra cement ; Complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for rendering 10 mm thick on fair faces of brick work or concrete surfaces on ceiling in CM 1:3 finishing even and smooth without using extra cement ; Complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm ; Complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 5489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces ; Complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of newly plastered surface of wall and applying three coats of white wash on ceiling surface ; Complete all as specified and as directed by Engineer-in-Charge.

Dismantaling of Brick tiles or terracing tiles, single layer on roofs ; Complete all as specified and as directed by Engineer-in-Charge.

Demolition Mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) ; Complete all as specified and as directed by Engineer-in-Charge.

Demolition of cement concrete of any description or in any position and disposing the rubbish to a distance exceeding 50 Mtr but not exceeding 100 Mtr away to low lying areas ; Complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in flooring Finishing fair and even ; Complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for cleaning of dust & dirt , Removal of all loose existing bituminous material or with chipper & applying heat torch gun to get smooth plain finished surface. Repair all joints & cracks with Highly Elastic bituminous Cold applied Putty-Tarplast- having penetration after setting upto 8mm & confirming to IS 1580:1991. Any annular space between drain pipe and concrete should be filled with mortar admixed with ShaliSBR latex of STP Ltd. Making necessary Gola 75x75 mm with rich cement mortar admixed with ShaliSBR latex of STP Ltd at the interface of horizontal & Vertical junctions ; Complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for Slightly damp the surface, avoid standing Water. Prime the surface with Tarfelt LM mixed with potable water in the ratio 1:1 and apply @ 400gm/sqm (as per surface condition). Allow the primer to touch dry in tacky position in open atmosphere. Thenafter apply 1st coat of Tarfelt LM (Liiquid membrane) having elongation 200% confirming to ASTM-C-412 & bridging of 8mm confirming to ASTM-C-836 with tensile strength after 7 days 0.5mm confirmin to ASTM-C-412 with no diluation of water on primed surface is still tacky with consumption of 0.7 kg/sqm. lay Geotex of 45 GSM/Fibre mesh simultaneously and paste it properly with overlap of 50mm. Allow the first coat to dry for 10-12Hrs. Apply 2nd coat of cured first coat with consumption @ 0.7kg/sqm in opposite dierction of first coat by Brush or roller. Sprinkle sand @ 200Gm P/Sqm while the coating is stick to facilitate plastering for protection screed. Allow it to dry for 10-12 hrs . Apply 3rd coat if required as per site reqirement. Providing & Laying minimum 50mm PCC in slope with welded wire mesh 1.5 mm as reinforcement and PCC admixed with Shallplast LW+ of STP Ltd (Integral Waterproofing compound) @200 ml per bag of cement on horizontal surface for mechanical protection over a separation layer of ShallGeo Textile 120 gsm in client Scope ; Complete all as specified and as directed by Engineer-in-Charge.

Dismantling boarding , any description , fixed in any position with screws ; Complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre.

Supply and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions ; Complete all as specified and as directed by Engineer-in-Charge.

Taking down Chowkats or frames from the opening of size not exceeding 1.5 sqm each with shutters ( without taking off shutters from the frames) ; Complete all as specified and as directed by Engineer-in-Charge.

Taking down Chowkats or frames from the opening of size exceeding 1.5 sqm but not exceeding 4 Sqmtr each with shutters ( without taking off shutters from the frames) ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing powder coated aluminium frame for doors ,windows, ventilators with one or more rebates including joining cleats for fixing ; Complete all as specified and as directed by Engineer-in-Charge.( Min. thickness of powder coating 50 micron)

Supply and Fixing powder coated aluminium glazed shutter(for doors) Al-section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading. ( Min. thickness of powder coating 50 micron)

Supply and Fixing Aluminium powder coated (of any colour) window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc ; Complete all as specified and as directed by Engineer-in-Charge.(Min. thickness of powder coating 50 micron)

Supply and Fixing Aluminium powder coated (of any colour) fixed type partition, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc ; Complete all as specified and as directed by Engineer-in-Charge.(Min. thickness of powder coating 50 micron)

Supply and Fixing Sheet glass, 5.5mm thick ordinary quality, in squares,exceeding 0.50 sqm in each pane including rubber packing and aluminium beading with and incl solar control film 25 Micron reflective type sticked to glass panes as per instructions of manufacturer ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing 12mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed in aluminium frame work ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing in repairs door closer hydraulically regulated, (Alminium die cast body) designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door shutter of size 150mm ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing Brass mortice lock, 4 levers, verticle type, size 100 mm, ; Complete all as specified and as directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing non skid ceramic light coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 15mm thick screed bed in CM 1:6 & ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing glazed ceramic coloured tiles 450x300mmx6mm thick, etc. on vertical surfaces such as skirting , dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering plaster in CM 1:4 on brick surface ; Complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for Vitrified ceramic dark shade tiles 10mm thick (Square/ rectangular) polished, area of each tiles n.exc 0.36 sqm in floors and skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of cement mortar(1:6) 15mm thick for laying floor finishes ; Complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for Vitrified ceramic dark shade tiles 10mm thick (Square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm in floors and skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of cement mortar(1:6) 15mm thick for laying floor finishes ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing in repairs of One piece ceramic floor/wall mounted EWC with features like twin flush system, noisless soft close seat cover, anty-bacterial surface white with PVC(SWR) 'P' / 'S' trap 110/110mm bore ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing vitreous china urinal half stall type with CP spreader white incl CP waste coupling with grating and union fordischarge pipe, including providing and fixing plug, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement fixing with brackets, flush pipe, grating and union for discharge pipe ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing in repairs 15mm bore Concealed type stop cock cast copper alloy CP screwed down high pressure with crutch or butterfly handle ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing in repairs 15mm bore type angle cock cast copper alloy CP screwed down high pressure with crutch or butterfly handle ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing in repairs of brass cromium brass plated fancy type bib taps 15 mm bore long nose screwed down screwed for iron pipe or for brass ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing in repairs Pillar taps 15mm bore, cast copper alloy , with capstan heads, chromium plated , screwed down high pressure , with or without l'ettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe and fixed ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing in repairs PVC waste pipe32mm dia fixed to WHB/Urinals ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing Vanity of size 800x450mm with vitreous china WHB including mirror of size 800x1200MM ; Complete all as specified and as directed by Engineer-in-Charge.

Demolition of brickwork, built in cement mortar including all quoins, arches, pillars, etc ; Complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, built in CM 1:6 ; Complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for brick work but except bricks (old dismantled serviceable bricks obtained from demolition shall be reused after necessary cleaning of mortar), built in CM 1:6 ; Complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, in half brick thick walls and built in CM 1:4 ; Complete all as specified and as directed by Engineer-in-Charge.

Dismantling Asbestos cement ( corrugated, semicorrugated ,etc.) sheets in roof coverings ; Complete all as specified and as directed by Engineer-in-Charge.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws ; Complete all as specified and as directed by Engineer-in-Charge.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade St. 240 ; Complete all as specified and as directed by Engineer-in-Charge.

Dismantling structural steel work including doors, gates but excluding framed truss etc ; Complete all as specified and as directed by Engineer-in-Charge.

Dismantling timber scantlings under 40 sq. cm in section, in any position ; Complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for two coats of synthetic enamel painting on steel surfaces of any description over 10 cm in width or girth not otherwise described over a coat of red oxide primer including prepration of previously untreated surfaces ; Complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for complete removal of existing treatment and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm ; Complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for complete removal of existing treatment and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 5489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces ; Complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing factory made uPVC white colour fixed glazed window/ventilator of any size made of frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.(Net opening will be measured for payment purpose.)

Supply and Fixing 08mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required ; Complete all as specified and as directed by Engineer-in-Charge.

Demolition of cement concrete in ground floors and paving not exceeding 15 cm thickness ( below or above ground level) and disposing the rubbish to a distance exceeding 50 Mtr but not exceeding 100 Mtr away to low lying areas ; Complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in sub base of floor ; Complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in kerbs rounded or chamfered ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand ; Complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for surface dressing n exc 15 cm deep soft/loose soil ; Complete all as specified and as directed by Engineer-in-Charge.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes , laying cables etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft soil; Complete all as specified and as directed by the Engineer-In-Charge.

Labour for Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm; Complete all as specified and as directed by the Engineer-In-Charge.

Labour for Removing excavated material n.exc 50 m and depositing where ; Complete all as specified and as directed by the Engineer-In-Charge.

Material and Labour for Cement concrete type D2, 1:4:8 (40 mm graded aggregate) in foundations, filling and mass concrete; Complete all as specified and as directed by the Engineer-In-Charge.

Material and Labour for RCC (Design Mix) M-25 (20mm graded aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete; Complete all as specified and as directed by the Engineer-In-Charge.

Material and Labour for RCC(Design Mix) M-25 (20mm graded aggregate) in column, pillars, piers, post and struts; Complete all as specified and as directed by the Engineer-In-Charge.

Material and Labour for RCC (Design Mix) M-25 (20 mm graded aggregate) as in Beams, canatilivers, bressummers, lintels over 1.5m span etc ; Complete all as specified and as directed by the Engineer-In-Charge.

Material and Labour for RCC(Design Mix) M-25 (20mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like; Complete all as specified and as directed by the Engineer-In-Charge.

Supply and Fixing Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of rough finished surfaces of concrete in foundation and plinth beams; and similar work vertical or to batter ; Complete all as specified and as directed by the Engineer-In-Charge.

Supply and Fixing Formwork to sides of pillars, posts, struts, piers, columns and stanchions of rough finished surfaces of concrete; Complete all as specified and as directed by the Engineer-In-Charge.

Supply and Fixing Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) of fair finished surfaces of concrete; Complete all as specified and as directed by the Engineer-In-Charge.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide; Complete all as specified and as directed by the Engineer-In-Charge.

Material and Labour for TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips; Complete all as specified and as directed by the Engineer-In-Charge.

Material and Labour for TMT Mild steel bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips; Complete all as specified and as directed by the Engineer-In-Charge.

Material and Labour for TMT Mild steel bar 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders; Complete all as specified and as directed by the Engineer-In-Charge.

Material and Labour for Cement concrete 75 mm thick type C-2 (1:3:6) using 40 mm graded stone aggregate as in plinth protection etc finished even and smooth using extra cement ; Complete all as specified and as directed by the Engineer-In-Charge.

Material and Labour for broken bricks Hardcore of gauge n exc. 63 mm, deposited , spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface; Complete all as specified and as directed by the Engineer-In-Charge.

Material and Labour for providing and fixing toughned glass 12mm thick as in hinged door, partitions automatic doors and similar work including cutting to shape, drilling holes and all necessary items as required; Complete all as specified and as directed by the Engineer-In-Charge.

Supply and Fixing 450mm long Brass handles, cast type ; Complete all as specified and as directed by the Engineer-In-Charge.

Material and Labour for making toughned glass frosted any thickness mechanically by using chemicals etc to the entire saisfaction of AGE ; Complete all as specified and as directed by the Engineer-In-Charge.

Material and Labour for Embossed any type of emblem of size 0.45x0.45M on frosted glass door ; Complete all as specified and as directed by the Engineer-In-Charge.

Material and Labour for Vitrified ceramic dark shade tiles 10mm thick (Square/ rectangular) polished, wood finished, size of tiles 1200x200mm in floors and skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of 15mm thick cement mortar(1:6) for laying floor finishes ; Complete all as specified and as directed by the Engineer-In-Charge.

Supply and Fixing 8mm thick toughned frosted glass partition of required size and fixed to wall/Floor including cutting to shape, drilling holes and all fittings arengement complete as required & to the entire satisfaction of AGE ; Complete all as specified and as directed by the Engineer-In-Charge.

Supply and Fixing in repairs 12mm thick Perforated particle board/tiles for insula-tion and accoustic purposes, 60cm x 60cm in size, fixed in ceiling, flat or sloping in framework fixed with screw or with staples on snap grid ; Complete all as specified and as directed by the Engineer-In-Charge.

Fixing only in repair 12mm thick Perforated particle board/tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixed in ceiling, flat or sloping in framework fixed with screw or with staples on snap grid ; Complete all as specified and as directed by the Engineer-In-Charge.

Material and Labour 20mm thick Wood wool building slabs, light weight, type 1, fixed with screw in MS/wooden frame work fixed in ceiling flat or sloping ; Complete all as specified and as directed by the Engineer-In-Charge.

Fixing only 20mm thick Wood wool building slabs, light weight, type 1, fixed with screw in MS/wooden frame work fixed in ceiling flat or sloping ; Complete all as specified and as directed by the Engineer-In-Charge.

Supply and Fixing in repairs Particle board for insulation purposes, fixed with screw to timber/MS frame work in ceiling flat or sloping ; Complete all as specified and as directed by the Engineer-In-Charge.

Fixing only in repairs Particle board for insulation purposes, fixed with screw to timber/MS frame work in ceiling flat or sloping ; Complete all as specified and as directed by the Engineer-In-Charge.

Demolition of reinforced cement concrete as in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work (reinforcement cut as required to facilitate demolition) ; Complete all as specified and as directed by the Engineer-In-Charge.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials and making good disturbed surfaces of walls, floors, etc ; Complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for point wiring for One light point/Fan point controlled by one switch complete with 1.5 sqmm single core PVC insulated unsheathed FRLS cable 1100 volts grade with multi stranded, copper conductor in and including non-metalic PVC conduit incl accessories totally concealed in wall, ceiling/roof etc., with modular metal flush boxes of suitable size & modules, concealed in walls incl suitable white cover plate for housing switches/sockets/regulators etc, including provn of 1.5 sqmm nominal cross sectional area, PVC insulated, FRLS, unsheathed, 1100 volt grade, multistranded single core green colour copper conductor for earth continuity connected to earth dolly ; Complete all as specified and as directed by Engineer-in-Charge. NOTE: (i) Cost of modular metal flush boxes concealed in wall with suitable white cover plate for mounting switch/sockets, regulator, bell push, etc & cost of cutting chases & making good to disturbed surface with cement mortar, if required any shall be deemed to be included in the quoted rate (ii) Modular metal flush boxes should be painted with a coat of red oxide to steel surface to avoid rust and rate shall be deemed to be included in the quoted rate

Material and Labour for point wiring for One bell/buzzer point controlled by one bell push button independent complete with 1.5 sqmm single core PVC insulated unsheathed FRLS cable 1100 volts grade with multi stranded, copper conductor in and including non-metalic PVC conduit incl accessories totally concealed in wall, ceiling/roof etc., with modular metal flush boxes of suitable size & modules, concealed in walls incl suitable white cover plate for housing switches/sockets/regulators etc, including provn of 1.5 sqmm nominal cross sectional area, PVC insulated, FRLS, unsheathed, 1100 volt grade, multistranded single core green colour copper conductor for earth continuity connected to earth dolly ; Complete all as specified and as directed by Engineer-in-Charge. NOTE: (i) Cost of modular metal flush boxes concealed in wall with suitable white cover plate for mounting switch/sockets, regulator, bell push, etc & cost of cutting chases & making good to disturbed surface with cement mortar, if required any shall be deemed to be included in the quoted rate (ii) Modular metal flush boxes should be painted with a coat of red oxide to steel surface to avoid rust and rate shall be deemed to be included in the quoted rate

All as per item no.95 above but on the same board with other points for One fan/light/bell/buzzer point controlled by one bell push button ; Complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for point wiring for One 3 pin 5 Amps socket outlet on independent board complete with 1.5 sqmm single core PVC insulated unsheathed FRLS cable 1100 volts grade with multi stranded, copper conductor in and including non-metalic PVC conduit incl accessories totally concealed in wall, ceiling/roof etc., with modular metal flush boxes of suitable size & modules, concealed in walls incl suitable white cover plate for housing switches/sockets/regulators etc, including provn of 1.5 sqmm nominal cross sectional area, PVC insulated, FRLS, unsheathed, 1100 volt grade, multistranded single core green colour copper conductor for earth continuity connected to earth dolly ; Complete all as specified and as directed by Engineer-in-Charge. NOTE: (i) Cost of modular metal flush boxes concealed in wall with suitable white cover plate for mounting switch/sockets, regulator, bell push, etc & cost of cutting chases & making good to disturbed surface with cement mortar, if required any shall be deemed to be included in the quoted rate (ii) Modular metal flush boxes should be painted with a coat of red oxide to steel surface to avoid rust and rate shall be deemed to be included in the quoted rate

Material and Labour for point wiring for one 3 pin socket outlet,15 Amps on independent board complete with 4.0 sqmm single core PVC insulated unsheathed FRLS cable 1100 volts grade with multi stranded, copper conductor in and including non-metalic PVC conduit incl accessories totally concealed in wall, ceiling/roof etc., with modular metal flush boxes of suitable size & modules, concealed in walls incl suitable white cover plate for housing switches/sockets/regulators etc, including provn of 4.0 sqmm nominal cross sectional area, PVC insulated, FRLS, unsheathed, 1100 volt grade, multistranded single core green colour copper conductor for earth continuity connected to earth dolly ; Complete all as specified and as directed by Engineer-in-Charge. NOTE: (i) Cost of modular metal flush boxes concealed in wall with suitable white cover plate for mounting switch/sockets, regulator, bell push, etc & cost of cutting chases & making good to disturbed surface with cement mortar, if required any shall be deemed to be included in the quoted rate (ii) Modular metal flush boxes should be painted with a coat of red oxide to steel surface to avoid rust and rate shall be deemed to be included in the quoted rate

Supply and Fixing modular switch 1 way 6A, 240 volts, 1 module ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing modular switch 1 way 16A, 240 volts, 1 module ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing modular bell push, one way, 6 Amps, 240 Volts, 1 module ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing modular fan step regulator, 2 module, 240 Volts, 50 Hz, suitable for ceiling fan 1200 mm sweep ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing modular socket, 6A, 240 volts, 2/3 pin combined 2 module, flush type ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing modular socket, 6A/16A, 240 volts, 2/3 pin combined 2 module flush type ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing ceiling rose surface PVC/Polycarbonate, isolated body with face Bakelite 65x50 mm three terminal complete ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing Lamp holder angular type, PVC/Polycarbonate type with back plate suitable for batten fittings including suitable size presto plastic board for resting to holder ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing buzzer, Ding Dong, AC, 240 Volts, single pole, fixed over & including pressed steel sunk box of size 175 x 100 mm duly covered with 3mm thick bakelite sheet ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing sheet steel metal enclosure single pole & neutral with a 2 pin and earth plug and socket complete with one single pole MCB SP 20 Amp, 240 volts ; Complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for distribution board made out of sheet metal enclosure (CRCA sheet) dust and vermin proof, double door, TPN 4 way, 415 volts grade with 200 Amps insulated rated bus bar, earth bar IP- 43 & IK-09, door earthing flush to wall, including testing suitable for fixing MCB SPN, SP etc, including taking down existing unsv one and removing from site ; Complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for distribution board made out of sheet metal enclosure (CRCA sheet) dust and vermin proof, double door, SPN 12 way, 240 volts grade with 200 Amps insulated rated bus bar, earth bar IP- 43 & IK-09, door earthing flush to wall, including testing suitable for fixing MCB SPN, SP etc, including taking down existing unsv one and removing from site ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing MCB of SP 5 to 32 Amps current carrying capacity, 240V, 10KA 'C' curve fixed in the MCB DB complete with connection testing and commissioning including taking down old unsv one from the site ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing MCB of SPN 32 Amps current carrying capacity, 240V, 10KA 'C' curve fixed in the MCB DB complete with connection testing and commissioning including taking down old unsv one from the site ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing MCB TPN 63 Amps current carrying capacity, 240V, 10KA 'C' curve fixed in the MCB DB complete with connection testing and commissioning including taking down old unsv one from the site ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing sub main wiring with 2 runs of 6.0 sqmm single core, multi-stranded PVC insulated, FRLS unsheathed cable 1100 Volts grade with copper conductor drawn through and including concealed non metalic PVC conduit, medium grade, ISI marked, suitable size with conduit fittings and accessories concealed in wall/ceiling/floor including 1 run of 6.0 Sqmm multistranded PVC insulated FRLS, copper conductor cable as earth continuity conductor and connecting to common earth dolly including taking down old unsv one from site ; Complete all as specified and as directed by Engineer-in-Charge. NOTE: Two runs of 6.0 sqmm copper cable and one run of 6.0 sq mm copper cable alongwith non metallic PVC conduit/conduit accessories will be measured as one unit length

Supply and fixing sub main wiring with 2 runs of 4.0 sqmm single core, multi-stranded PVC insulated, FRLS unsheathed cable 1100 Volts grade with copper conductor drawn through and including concealed non metalic PVC conduit, medium grade, ISI marked, suitable size with conduit fittings and accessories concealed in wall/ceiling/floor including 1 run of 4.0 Sqmm multistranded PVC insulated FRLS, copper conductor cable as earth continuity conductor and connecting to common earth dolly including taking down old unsv one from site ; Complete all as specified and as directed by Engineer-in-Charge. NOTE: Two runs of 4.0 sqmm copper cable and one run of 4.0 sq mm copper cable alongwith non metallic PVC conduit/conduit accessories will be measured as one unit length

Supply and fixing sub main wiring with 2 runs of 2.5 sqmm single core, multi-stranded PVC insulated, FRLS unsheathed cable 1100 Volts grade with copper conductor drawn through and including concealed non metalic PVC conduit, medium grade, ISI marked, suitable size with conduit fittings and accessories concealed in wall/ceiling/floor including 1 run of 2.5 Sqmm multistranded PVC insulated FRLS, copper conductor cable as earth continuity conductor and connecting to common earth dolly including taking down old unsv one from site ; Complete all as specified and as directed by Engineer-in-Charge. NOTE: Two runs of 2.5 sqmm copper cable and one run of 2.5 sq mm copper cable alongwith non metallic PVC conduit/conduit accessories will be measured as one unit length

Supply and fixing sub main wiring with 2 runs of 1.5 sqmm single core, multi-stranded PVC insulated, FRLS unsheathed cable 1100 Volts grade with copper conductor drawn through and including concealed non metalic PVC conduit, medium grade, ISI marked, suitable size with conduit fittings and accessories concealed in wall/ceiling/floor including 1 run of 1.5 Sqmm multistranded PVC insulated FRLS, copper conductor cable as earth continuity conductor and connecting to common earth dolly including taking down old unsv one from site ; Complete all as specified and as directed by Engineer-in-Charge. NOTE: Two runs of 1.5 sqmm copper cable and one run of 1.5 sq mm copper cable alongwith non metallic PVC conduit/conduit accessories will be measured as one unit length

Supply and fixing sub main wiring with 4 runs of 6.0 sqmm single core, multi-stranded PVC insulated, FRLS unsheathed cable 1100 Volts grade with copper conductor drawn through and including concealed non metalic PVC conduit, medium grade, ISI marked, suitable size with conduit fittings and accessories concealed in wall/ceiling/floor including 2 run of 6.0 Sqmm multistranded PVC insulated FRLS, copper conductor cable as earth continuity conductor and connecting to common earth dolly including taking down old unsv one from site ; Complete all as specified and as directed by Engineer-in-Charge. NOTE: Four runs of 6.0 sqmm copper cable and one two of 6.0 sq mm copper cable alongwith non metallic PVC conduit/conduit accessories will be measured as one unit length

Taking down carefully existing serviceable Ceiling fan/Wall mounted fan, ceiling cable end, etc., removing the fan for keeping in safe custody, hanging the ceiling fan with down rod after rewiring including clamps, hooks, holdfasteners etc and connecting up, including making electric connection from ceiling rose or connector to fan ; Complete all as specified and as directed by Engineer-in-Charge.

Taking down carefully existing serviceable exhaust fan, ceiling cable end, etc., removing the fan for keeping in safe custody, fixing the exhaust fan after rewiring and connecting up, including making electric connection from ceiling rose or connector to fan ; Complete all as specified and as directed by Engineer-in-Charge.

Taking down carefully existing serviceable Split type AC of any capacity, ceiling cable end, etc., removing the AC for keeping in safe custody and refixing the same as directed by Engr-in-Charge after rewiring with provn of new suitable MS bolts, suitable size copper tube (no brazing will be entertained) grouted to wall and connecting up and making good to the disturbed surface in cement morter 1:3 or cement concrete 1:2:4, Type B-1 as required and testing ; Complete all as specified and as directed by Engineer-in-Charge. NOTE: Cost MS bolts, nuts & washers, copper tube as per site requirement etc., and minor parts, if any, other than those are not specified in the schedule and required for smooth functioning of geyser will be deemed to be included in the quoted rate

Dismantling and taking down carefully existing serviceable tube light single/double of any wattage or size street light fittings for repair or replacement of burnt/worn out accessories or carrying to MES store for keeping in safe custody, refixing the same at its original location after wiring, including making electric connection from connector to light fittings & connecting up, testing the same for smooth operation ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, double sided connection, holder including LED tube light connecting up with 3 core flexible copper conductor cable of suitable size from ceiling rose, including taking down existing unserviceable one and removing from site ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing LED roadway luminaries 70 Watt, 230 V AC outdoor type with epoxy black powder coated sheet, high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket of suitable size with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete incl connecting wire with flexible PVC insulated copper cables from ceiling rose to fitting complete and testing, including taking down existing unsv one and removing from site ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete including connecting and testing ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing LED flood light 100 watt 230 V, AC, outdoor type with thermal management in multiple optics and equipped with IP-66 protection, with impact and corrosion resistant complete with driver and lamp complete including necessary electrical connection with flexible 3 core PVC insulated copper cables from ceiling rose to fitting complete and testing, including taking down existing unsv one & removing from site complete ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing PLUTO NEO LED luminaire 600 mm x 600 mm, 40 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing COMET ROUND Slim surface mounted round shape 15 watt 220 volts AC, 6000K recessed type LED luminaire, die-cast aluminium body with specular finish aluminium reflector of fixture size 107x78mm and ceiling cut out of 92mm dia with IP-20 protection with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with 3 core flexible copper conductor cable of suitable size ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing PLUTO 1x1 high efficacy, recess LED flat panel with high brightness LED for glare-free homogenous illumination of fixture size 295x295x70mm & ceiling cutout 280x280mm with 15 watt LED 5700K ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing LED footlights/pathway light with downthrow effect, made up of aluminium die cast and extruded composite body cover, with dark grey colour, 3 Watt, WW, with IP-65 protection, 240 volts, fixed to wall by means of grouting bolts ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing EXIT sign lamp, rectangular shape, Red/Green & Black, Standard size, fixed to back mounting above the door ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing PLUTUS outdoor wall light fittings, 1 x 3 Watt, WH, AC 240 Volt, decorative type with aluminium die cast, dark grey colour with IP-65 protection ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing Neon LED flexible strip lights of red colour, IP 20 non integral, 220Volt, and fixing in wall/panelling/false ceiling drops including testing ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing NEON LED strip connector, 220 volts for IP 20 non integral flexible LED strip light (Colour RGB) ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing garden light with square shape, integral decorative LED bollard with opal acrylic with IP65 protection for single compact LED lamp of capacity 1x9Watt LED with all accessories complete and necessary electrical connection, testing, including taking down existing unsv one & removing from site ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing Wall mounted fan of 400mm sweep plastic body and blade including pull cords for speed regulation & wide oscillation control, with 1300 RPM, 60 air delivery, 50 Watt, colour ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing exhaust fan, steel body AC single Phase, 230V of size 450mm sweep, with blades and frame and louvers complete fixed to wall with suitable MS bolts, grouted to wall and connecting up with cable from connector to fan ; Complete all as specified and as directed by Engineer-in-Charge.

Supply & laying in trenches/drawn through pipes or in road crossing/floors/along poles/equipments etc., of XLPE insulated, armoured with multistranded aluminium conductor cable conforming to IS-7098 Part-I (1998), heavy duty, 1100 Volts grade of size 2 core 10 sqmm nominal cross sectional area including necessary double compression copper gland and connecting up using suitable size aluminium lugs testing, incl taking down old unsv one from site ; Complete all as specified and as directed by Engineer-in-Charge.

Supply & laying double wall corrugated (DWC) high density poly ethylene (HDPE) of size 40mm dia including all necessary fittings, PN-4 rating, pressure 6 Kgf/cm², conforming to IS-16205 (Part-24) with high ring stiffness & cursh resistance capacity, etc., laid in trench for protection of submersible flat cable ; Complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for Earthing complete in replacement with galvanised iron mild steel earth plate electrode 60 cm x 60 cm x 6.3mm thick burried directly in ground vertically to a depth not less than 2.25 m below ground level with top edge of earth plate at a depth of not less than 1.5 m below normal ground level, connected to glavanised earth lead of GI wire of size 4mm dia by means of GI Bolts, Nuts, check nuts & washers and other end of the earth wire connected to earthing test point and protected by galvanised iron pipe light grade 25mm dia from earth plate to Panel/DBs and water pipe 20mm dia GI medium grade from top of the earth electrode raised upto a level of 50cm above ground level, MS funnel with wire mesh embeded in earthing pit of size 30x30x30cm in PCC (1:3:6) type C-1 incl exposed surfaces smoth finished with 15mm thick cement mortar (1:6), RCC pre-cast (1:2:4 type B-1) cover slab of 40mm thick with 2 Nos. MS handles of 12mm dia suitable for carrying of pit cover, Angle iron frame made out of 40x40x4mm angle iron for 30x30mm PCC pit for holding the pit cover including providing charcoal or coke and salt in alternative layers of 15 cm including necessary earth work in soft/loose soil, returning, refilling and removing of surplus soil to a distance n. exc. 50 mtr testing complete all as shown in electrical plate No-3 of MES Schedule Part-I of SSR-2009 ; Complete all as specified and as directed by Engineer-in-Charge. NOTE: (a) Cost of excavation, earth work, watering pipe, test point, MS Funnel with wire mesh and PCC pit with cover will be deemed to be included in the quoted rate. No extra cost shall be paid to the contractor against these items. (b) On testing after completion of job, if desired earth resistance is not obtained, the earthing shall be redone by the contractor & no extra cost will be given to the contractor.

ESS KAY BUILDER

M/s. M Company

B.J.CONSTRUCTION CO

GEE EMM ASSOCIATES