Providing LED Street light in 6 Percent abadi Village Namoli (Part-II), Greater Noida

Supply & fixing of 8mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 135 mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect. (UPPWD-2018-643)

Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 72 Watt. Confirming to IP 66 protection complete in all respect. CAT- AA (UPPWD-2018-1422)

S/F of M.S. Rod for earthing with 2.5 m long solid 20mm dia hot dipped galonished M.S. Rod burried till the top reaches 1.7 mtr. Below the GL Complete with bolts & nuts and G.I. earth wire 7/14 complete in all respect. GNIDA-SOR-2024, S. No.-41

Supply and burying of 40mm dia x 4.5 metres long G.I. Pipe vertically for earthing having 12mm dia. Holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No. 6 to 8SWG GI wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) upto switch board, 30cm square C.I. box with hinged cover masonary enclosure, unnel at top, alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all espects as per drawing. (UPPWD-2018-701)

Supply and wiring of submains with 2 nos. 2.5 sq mm & with 1 no earth wire of 1.5 sq mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing PVC conduit complete, including supply of all material, labour and T & P etc. required for proper completion of the work as directed by Engineer in charge. (UPPWD-2018-291)

Supply & laying of Aluminium conductor XLPE insulated, armoured served, sheathed cable 1100 V grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks onsides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the E/I, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. (UPPWD-2018-501)

4Cx16 Sqmm

3.5CX25 Sqmm

3.5X50 Sqmm

Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. (UPPWD-2018-504)

Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respect. (UPPWD-2018/716)

Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect.(UPPWD-2018/807)

S/L of 90mm dia DWC pipe for drawing of power cable across the road by drilling of 120mm dia at 1mtr. Below the road level the work should be done by manual Trenchless method. Complete in all respect. GNIDA SOR-2024 (S.No-15)

S&F of 6 Amp. to 32 Amp. DP MCB (10 KA) C Curve. CAT B (UPPWD-2018/1009)

Supply and fixing of heavy duty cadmium plated copper connector with end plate complete in all respect. (UPPWD-2018/1128 C)

Four way connector HKM 100

Labour Cess and GST will be paid extra as per govt. orders