8519 REPAIRS TO ROOF SHEETS FALSE CEILING PANELING BLOCK WALLING AND ALLIED WORKS AT OTM AND MD ACCN UNDER AGE B R I OF GE SOUTH PUNE

Amount

M&L for brickwork with fly ash bricks, straight or curved on plan exc. 6m mean radius, built in CM 1:6 complete, including demolition of brick work or stone / boulder masonary, built in cement mortar including all quoins, arches, pillars etc., complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling / mass concrete incluidng including demolition of existing PCC of any type and removal of debries material outside defence land etc. complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 (Using 20mm graded stone aggregate), 75 mm thick as in path / plinth protection laid as to bays, finished the surfaces even and smooth without using extra cement including demolition of old unserviceable path / plinth of any type and removal of debries material outside defence land etc. complete all as specified and directed.

M&L for mild steel framed work as in grills designe type with ends of bars shouldered or riveted, or forged into spikes, framed guard bars or similar work using steel section conforming to Fe-410-0 or Fe-310-0., complete all as specified and directed.

M & L for preparation of new steel surfaces & applying two coats of synthetic enamel to steel surfaces of any description over 10 cm in width or girth not otherwise described, over a coat of red oxide primer complete all as specified and directed.

S&F in repairs 25 mm dia stainless steel fency type heavy duty curtain rod, medium grade including fency type bracket, stops rolled and caps & side bulbs etc. complete all as specified and directed.

S&F 6 mm thick veenred decorative plywood ( 5 Nos of ply ) grade 1 with BWR resin with decorative face veener on one face fixed with nails to timber frame work all including one coat of malimime polishing, complete all as specified and directed.

S&F pluging to cement concrete or stone walls, complete for wooden fillets, grounds, mouldings, boarding etc at distance n. exc 1.00 m, complete all as specified and directed.

S&F plain fillets, 2nd class hard wood, sectional area exc. 6 & n. exc. 13 sqcm, wrought, fixed with screws in repairs, complete all as specified and directed.

S&F 2nd class hard wood of sectional area exc. 6 Sqcm and n. exc. 13 Sqcm round beading to top & bottom suitable for wall paneling work with melamine polish for architect look complete fixed with screws in repairs, complete all as specified and directed.

S&F Solid PVC wall lining consisting of 5mm thick wooden grains printed PVC sheet including of solvent cement and fixing at site on PVC frame as per manufacturer's instructions and drawing to be provided by Engr-in-charge, complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm suitable for wall paneling inclusive of fixing on walls to make PVC Frame as per manufacturer's instructions and drawing to be provided by Engr-in-charge, complete all as specified and directed.

M&L for completely removal of existing tinted / treatment from surfaces of wall and pplying two coats of luster paint white or tinted on walls over and including a coat of wall care putty, complete all as specified and directed.

M&L for preparation of existing surface of any description (plastered and old decorated) over 10cm width or girth and applying one coat of Apex Ultima Weather shield paint, complete all as specified and directed.

M&L for preparation of old decorative surfaces of wall including cornices (plastered or unplastered) of any description including sand papered and remove dust etc. and applying two coats of Oil Bound distemper, complete all as specified and directed.

M&L for preparation of old decorative surfaces of ceiling, cornices (plastered or unplastered) of any description incluidng sand papered & remove dust etc. and applying one coat of Oil Bound distemper, complete all as specified and directed.

M&L for complete removal of old decorative surfaces of any description and applying 2 mm thick wall care putty on wall and finish the surfaces even and smooth by grinding and rubbing etc, complete all as specified and directed.

Material and labour for prepaparation of old wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint of approved shade, complete all as specified and directed.

M&L for prepaparation of old steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint of approved shade, complete all as specified and directed.

M&L for 25 mm thick PCC(1:2:4) type B-1 using 12.5mm graded stone aggregate below flooring as a levelling course in floor including demolition of existing flooring (concrete including tiles), complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 300 mm x 600 mmx 7mm thick on vertical surfaces such as skirtings, dados and riser to steps, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15 mm thick rendering in cement mortar 1:4 including triangular filleting in CM 1:4 on tope edges including demolition of old unserviceable wall finishes of any type and removal of debries material outside defence land etc. complete all as specified and directed

M&L for joint free Non-skid Ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 20 mm thick screed bed in cement mortar 1:4 including demolition of old unserviceable floor finishes of any type and removal of debries material outside defence land etc. complete all as specified and directed

M&L for coloured, double charged, ultra charged joint free vitrified ceramic tiles 10 mm thick (square / rectangular) polished, area of each tiles not exceeding 0.42 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match (light colour) laid over and incluidng 20 mm thick screed bed in CM 1:6 including demolition of old unserviceable floor finishes of any type and removal of debries material outside defence land etc. complete all as specified and directed

M&L for coloured double charged, ultra charged, joint free Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm, but not exc 1 sqm in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match (light colour) including laid over 20 mm thick screed bed in CM (1:6) including demolition of old unserviceable floor finishes of any type and removal of debries material outside defence land etc. complete all as specified and directed

M&L for cloured Machine pressed precast concrete interlocking paver block tiles, M-35 of 60 mm thick of any shape and size confirming to IS 15658-2006, glossy finish as in floor / pavement laid over and incluidng 30 mm thick stone dust cushioning including demolition of old unserviceable floor / path finishes of any type and removal of debries material outside defence land etc. complete all as specified and directed

M&L for precast coloured chequered cement concrete tiles, glossy finish of size 305 x 305 x 25 mm thick machine pressed set, jointed in neat cement slurry and pointed with grey cement and pigmenrt as in floor and cut and polished laid over and including 20 mm thick screed bed in cement motar 1:4 including demolition of old unserviceable floor finishes of any type and removal of debries material outside defence land etc. complete all as specified and directed

M&L 75 mm thick PCC 1:4:8 Type D-2 (using 40 mm graded sone aggregate ) as in sub base/ flooring including demolition of existing PCC from floors of any type and removal of debries material outside defence land etc. complete all as specified and directed

M&L for PCC 1:2:4 type B1(20 mm graded stone aggregate) cement concrete as in rounded or coping chamfered on edges of chequired tiles / interlocking tiles and fillling in post etc. complete all as specified and directed.

M&L for 35-40 mm thick Cudappah stone slab laying in vertical or platforms including 15 mm thick cement screed bed in cement mortar 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified and directed.

M&L for granite (of any type) work (table rubbed and polished) 18-20mm thick as in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, laid over and including 15 mm thick plaster in cement mortar 1:6 including dismantling of old unserviceable stone slabs / tiles complete all as specified and directed

Rounding (half) to edges of stone slab one edge, such as in steps, cooking platform and other similar situations, complete all as specified and directed.

Taking down cement mortar plaster of any description on wall including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work in cement mortar 1:4 mixed with water proofing compound finished even and smooth without using extra cement, complete all as specified and directed. Note:- WPC shall measured and paid sepretally.

M&L for 15mm thick rendering on fair faces of brick work in cement mortar 1:6, finished even and smooth without using extra cement, complete all as specified and directed.

Supply only Integral waterproofing compound, complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant priming coat after and including making smooth surface with applying 2mm thick wall care putty, complete all as specified and directed.

Material & Labour for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed.

Taking down wooden frame with shutter /steel window without taken off shutter from the frame, not exceeding 1.5 sqm each including removing from site, complete all as specified and directed.

Taking down wooden frame with shutter without taken off shutter from the frame exceeding 1.5 sqm but not exceeding 4 sqm each including removing from site, complete all as specified and directed.

Taking down shutters of any description exceeding 1 sqm but not exceeding 2 sqm each including removing from site, complete all as specified and directed.

S & F pressed steel frames for doors with one & more rebates including necessary fixing lugs, hinges, lock strike plate etc complete as specified size of frame 105 x 60mm with and including MS hold fast - 04 Nos., MS cold rolld 100mm size butt hinges- 03 Nos., welding to existing MS frame, PCC bed block 1:2:4 type B1 for embadding hold fasts and plain cement concrete 1:3:6 type C-0 (12.5mm graded stone aggregate) for filling in MS frames, complete all as specified & directed.

S&F 300 mm long aluminium alloy sliding door bolt with hasp staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy fixed, complete all as specified & directed.

S&F 200 mm long brass barrel tower bolts of extruded section ISI marked complete all as specified and directed

S&F 150 mm long brass handles, caste type anodised ISI marked complete all as specified and directed .

S&F in repair 200 mm long brass barrel tower bolts of extruded section ISI marked complete all as specified and directed.

S&F in repair 150 mm long brass handle caste type alloy handles, caste type polished bright complete all as specified and directed.

S&F 200 mm long aluminium, anodised, barrel tower bolts of extruded section ISI marked complete all as specified and directed.

S&F 150 mm long extruded aluminium alloy handles, cast type anodised ISI marked complete all as specified and directed.

S&F 100 mm long extruded aluminium alloy with galvanised mild steel hinges pin, anodised and fixed, type C-21, complete all as specified & directed.

S&F 100 mm long hinges heavy weight, cold rolled mild steel and fixed, complete all as specified & directed.

S&F in repair 150 mm length floor door stopper of aluminium alloy body and tongue, hard drawn steel spring complete all as specified and directed.

Supply and fixing of 32 mm thick factory made gauged and skeleton shutters, made from 1st class hard wood (Hollock), open rebated, prepared to receive glass, gauge etc (without sash bar), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass, gauge etc, size of members of shutters as specified in SSR-2009 Part-I, members kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed.

S&F 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both faces is coverde with decorative face veneer with lapping all around of the shutter / frame to match, complete all as specified & directed.

S & F factory made solid PVC moulded door shutters with particle bore core, 28 to 30 mm thick (stiles) with 2, 4 or 6 raised panels design with 2mm thick moulded PVC sheet on front face & 2 mm plain colour PVC sheet on back face, supplying & fixingued solid in frame at site as per specification & drawings with particle board core etc. including 3mm thick, 1st class hard wood teak beading all around on edging and welding 3 Nos. mild steel butt hinges of size100mm with existing mild steel frame complete all as specified and directed by Engr-in-Charge .

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet, reinforced with M.S square tube, supplying & fixing in opening as per specifications, drawings complete all as specified and as directed.

S&F aluminium powder coated three track sliding window with two or more shutters with & including 4mm thick tinted glass, one shutter of stainless steel mosquito proofing with good quality bearing, handle, lock etc using PVC beading etc by using following sections of `Jindal Aluminum Ltd ' or equivalent in Ajit India Pvt Ltd or Crystal Bombay as approved fixing to stone masonary walls with & including Ist class teak wood plugs of size 20mmX20mm at an interval of 0.5m alround the track including drilling holes, complete all as specified and directed by Engr-in-charge:- (a) Frame bottom 20620 (b) Frame top & side 20681 (c) Shutters top & bottom 20844 (d) Shutter inter lock 20724 (e) Handle (Side) for 20606 shutters

S&F aluminium powder coated partition by using following sections of `Jindal Aluminum Ltd ' or equivalent in Ajit India Pvt Ltd or Crystal Bombay as approved with 12 mm thick both side prelaminated particle board interior grade of approved colour in bottom panel and 5mm thick plain glass in top panel fixed with aluminium clips, beads, rubber gaskets etc., centre to centre distance of vertical member shall not exceeding 1mtr and horizontal member shall not exceeding 1.10 m using following aluminum section as specified in Jindal catalogue complete as directed fixing to stone masonary walls with & including Ist class teak wood plugs of size 20mmX20mm at an interval of 0.5m alround the track including drilling holes, complete all as specified and directed by Engr-in-charge:- (a) SP – 20048 (b) DP - 20047 (c) Glazing clips - 19352

S & F ventilators / louvers using 4mm thick x 10cm wide froasted glass strips and stainless steel wire cloth 0.36 mm nominal dia & 1.18 mm width aperature for mosquito proofing and following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make including rubber beading, complete all as specified and directed by Engr-in-charge:- (a) SP 20048 (b) Glazing clips 19352

M & L for carrying out non destructive water proofing treatment to sunken slab of toilets consisting of one WC, one nahani trap at bathroom and one nahani trap at Kitchen including cleaning of surface with wire brush removing loose particles, greasy elements, detecting leakage point, sealing joints of tiles/cracks in floor / wall with and including second course injection of CORESEAL 135A/CORESEAL 135B all as per manufacturers instructions and as directed by Engr-in-Charge. (Note :- The rate is inclusive of replacement of any defective fittings/fixtures of any type/material elbows, bend, tee, reducer single 'Y', double 'Y' with cleaning eye and concealed piece of pipe below floor as well as between wall and bend.) (Makes for this item :- AQUATYTE, CREAT SEAL grouting compound of Ashwin Enterprises, GPSS (ground penetrating sealing system) of Saga polytech or similar brand as approved by Accepting Officer.)

S & F in repairs roof sheets, prepainted, galvalume aluminium zinc coating 150 gms GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding, fixed with self tapping screws including taking down old unserviceable AC sheet complete all as specified and as directed.

S&F roof sheets, prepainted, galvalume aluminium zinc coating GI based plain sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws including dismantling of old unserviceable AC sheet, complete all as specified and as directed.

Dismantiling structural steel work including doors,gates but excluding framed trusses etc complete all as specified and as directed.

M&L for MS structural steel work, framed as in trusses, purlins, rafter, post etc. conforming to grade E-250 (Fe-410W, quality A) including shaped washers including necessary cutting required length, notching drilling, riveting and or welding or connecting with nut bolts with angle cleats, fish plat, gusset plate and also erecting in true position, complete all as specified and as directed.

Material and labour for prepaparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint of approved shade over a coat of pink primer, complete all as specified and as directed.

Supply and fixing of stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, galvanised wire, screws fixed to aluminium grills or wooden frames etc complete all as specified and as directed.

Supply and fixing butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised 100mm size fixed complete all as specified and as directed.

S&F Aluminum anodized fancy type barrel tower bolt of extruded section 200mm long, complete all as specified and as directed.

S&F 150 mm size aluminum handles decorative type, complete all as specified and as directed.

S&F in repair hydraulic door closer aluminium body suitable for door shutter of 850 to 1000mm in width and of weight between 61 to 80 Kg of approved make of ISI Marked, complete all as specified and as directed.

S&F in repairs bib taps, chromium plated, 15mm bore, fancy type with wall flange conforming to CAT No. CON- 037 Jaquar / 9206 (CASA), Cera or of equivalent make as specified here in after, complete all as specified and as directed.

S&F in repairs soap dish, chromium plated, CAT No. ACN-1131N Jaquar / BA-259 of Prayag or of Equivalent make as specified here in after, complete all as specified and as directed.

S&F in repairs chromium plated towel rail 20mm dia and 600mm long including brackets conforming to CAT No. ACN-111N of Jaquar/ BA-20 of Prayag or of Equivalent make asspecified here in after, complete all as specified and as directed.

S&F in repairs Health faucet CAT No. ALD-583KN of Jaquar/ BEA-85 of Prayag or of Equivalent make as specified here in after, complete all as specified and as directed.

S&F in repairs chromium plated angular type stop cock conforming to CAT No. 053 of Jaquar/ 9210 of Prayag or of Equivalent make as specified here in after, complete all as specified and as directed.

S&F in repairs chromium plated toilet paper holder conforming to CAT No. ACN-1151N of Jaquar/ BA-38 of Prayag or of Equivalent make as specified here in after, complete all as specified and as directed.

S&F in repairs chromium plated 15mm bore concealed stop cock with long neck conforming to CAT No. CON-069 of Jaquar or of Equivalent make as specified here in after, complete all as specified and as directed.

S&F in repairs chromium plated towel ring round with round flange conforming to CAT No ACN-1121 BN of Jaquar/9218 of Prayag. or of Equivalent make as specified here in after, complete all as specified and as directed.

S&F in repairs chromium plated wall mixer 3 in 1 including telephone shower for 15mm bore of pipe conforming to CAT No.CON 281 and HSH -1939 of Jaquar/ PIS-70 and BH-73 of Prayag and or of Equivalent make as specified here in after, complete all as specified and as directed.

S&F in repairs chromium plated, 2 way, bib cock with wall flange conforming to CAT No. CON 041N of Jaquar or of Equivalent make as specified here in after, complete all as specified and as directed.

S&F in repairs pillar taps swan long neck with aerator chromium plated 15mm bore fancy type with wall flange conforming to CAT No.DLX- 510 AKN ESSCO / CERA or of Equivalent make as specified here in after, complete all as specified and as directed.

S&F in repairs satinless steel towel rack wth hook (24"), complete all as specified and as directed.

S&F in repairs satinless steel Paper Holder with Lid, complete all as specified and as directed.

S&F glass coner round (9" x 9" ) with satinless steel railing, complete all as specified and as directed.

S&F in repairs brass chromium plated shower rose 100 dia with 235 mm long arm with or without swivel joints, including fixing to steel pipe or union, complete all as specified and as directed.

S&F satinless steel robe hook (khuti) with 5 Hook, complete all as specified and as directed.

S & F in repair towel ring CP, complete all as specified and as directed.

S&F in repair vitreous china wash counter top basin (colour), ovel type conforming to ECS-WHT-703 of "ESSCO" of equivalent make as specified here-in-after including CP waste coupling of "Jaquar" or of equivalent make complete all as specified and directed by Engr-in-Charge.

S&F in repairs vitreous china wash down water closet (pedestal pattern) white including connect to drain and flushing pipe, antisyphonage pipe including with plastic WC seat cover, closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminised hinging device etc, complete all as specified and as directed.

S&F in repairs vitreous china, squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rest, including concrete bedding, inlet, outlet pipe connections etc. complete all as specified and directed.

S & F in repair vitreous china wash basin white flat back of size 550x400mm including, including with CP waste coupling 32mm dia, chain and plug and PVC waste pipe including CI brackets, etc. complete all as specified and directed by Engineer-in-Charge

S&F in repair PVC low level flushing cistern 10 ltrs capacity make ISI or equivalent incl all internal fitting, pair of bracket, including inlet/outlet PVC pipe connections etc, complete all as specified and as directed.

S&F in replacement 1000 litre rotational moulded polyethylene water storage tanks (vertical cylindrical with closed top) double layered ISI marked with existing inlet, outlets & provision of washouts, vent pipes including all new tank nipples of suitable size etc. including taking down of old existing unserviceable take, complete all as specified and as directed.

Cleaning and removing all scale and dirt, etc, from tanks exc 250 ltr but n. exc 500 ltr and from mouths of circulating pipes, etc complete all as specified and as directed.

Cleaning and removing all scale and dirt, etc, from tanks exc 500 ltr but n. exc 1000 ltr and from mouths of circulating pipes, etc complete all as specified and as directed.

Cleaning and removing all scale and dirt, etc, from tanks exc 1000 ltr but n. exc 2000 ltr and from mouths of circulating pipes etc complete all as specified and as directed.

S&F in repairs 20mm bore gun-metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed.

S&F in repairs 25mm bore gun-metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed.

S&F in repairs 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed, complete all as specified and as directed.

S&F in repairs 25mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed, complete all as specified and as directed.

S & F 15 mm GI tubing medium grade including with all fittings & fixtures, fixed to walls / ceiling or laid in floors including taking up or down old unserviceable existing pipe, complete all as specified & as directed.

S & F 20mm GI tubing medium grade including with all fittings & fixtures, fixed to walls / ceiling or laid in floors including taking up or down old unserviceable existing pipe, complete all as specified & as directed.

M&L for cutting in stone concrete block or slab wall for chases, pining in making good to facings where required and painting in in cement mortar 1:3 to ends or edges of landinsgs, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed watter tubing etc and making good , cutting not exc10cm girth complete as specified and directed.

S & F in repairs 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls / laid under floors including dismantling of old existing unserviceable pipe, complete all as specified and as directed.

S & F in repairs 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls / laid under floors including dismantling of old existing unserviceable pipe, complete all as specified and as directed.

S& F 110mm bore PVC (SWR) bends radius, complete all as specified and as directed.

S&F 110 mm PVC (SWR) junction double, (double T), equal or unequal with access door, complete all as specified and as directed.

S&F 110mm PVC (SWR) vent cowl, complete all as specified and as directed.

S&F 110mm PVC (SWR) WC connector bent type, complete all as specified and as directed.

S& F 75mm bore PVC (SWR) bends radius, complete all as specified and as directed.

S&F 75mm PVC (SWR) junction double, (double T), equal or unequal with access door, complete all as specified and as directed.

S&F PVC (SWR), 75mm dia outlet floor trap, plain with grating including jointing with solvent cement, fixed to cement concrete type B1 1:2:4, complete all as specified and directed.

S&F PVC (SWR), 75mm dia outlet multi floor trap, plain with grating including jointing with solvent cement, fixed to cement concrete type B1 1:2:4, complete all as specified and directed.

S&F in repair 100 mm dia stainless steel grating with waste hole, complete all as specified and directed.

S&F in repair 100mm dia stainless steel grating, complete all as specified and directed.

S&F in repair 32/40mm bore PVC flexible waste pipe connecting to waste fitting for WHB / Sink, complete all as specified and directed.

S&F POP false ceiling two or more layer (ractangular/ oval/ rounded) decorative design with 12 mm thick glass fibre reinforced gypsum ceiling tiles of prima fine fissured micro look white coloured laid over and including grid work 600x600mm size by using GI powder coated “T” section grid (Silhaute type) as Main 'T' 38 X25mm, cross "T" 25x25mm and wall angle 25x25mm grid and 6 mm dia GI suspension wire etc complete including a coat of 1-2 mm thick POP finish including 2 or more coats of oil bound distemper including making niches for fans / light and disign as approved by Engr-in-charge including taking down of old unserviceable false ceiling, complete all as specified and directed by Engr-in-charge. Note:- Flat length & width dimensions will be measured for payment purpose only.

M&L for false ceiling with 8 to 9mm thick glass fibre reinforced Gypsum ceiling tiles of size 595 X 595 mm, prima fine fissured micro look white coloured laid over including grid work 600x600mm size by using GI powder coated “T” section grid as Main 'T' 38 X25 mm size and cross 'T" 25x25mm size and wall angle 25x25mm size grid and 4 mm dia GI suspension wire etc complete including taking down of old existing unserviceable false ceiling, complete all as specified and directed.

SARATH ENTERPRISES

Suma Construction

M/S BRJ & SONS

AJINKYA VIKRAM GAIKWAD

M/s.BAJRANG CONSTRUCTION

Emerald Construction