GE/C-33/2023-24 WELCOME MAINT ALONGWITH CERTAIN B/R WKS INCLUDING REPAIR/ REPLACEMENT OF INTERNAL WIRING AND PETTY REPAIR AND MISC E/M WORKS INCLUDING DAILY MAINT COMPLAINTS AT JCO/ ORs MD ACCN ADJACENT TO DK AREA AND HOUSE NO 1-150 AT DK-I UNDER GE

Amount

Preparation of old decorated surface (plastered or unplastered) of walls incl cornices pillar etc by brooming down or steel wire brushing scraping down smoke root mould moss and efforesceent salts and treating oil and greasy spots as applicable and applying one coat of white wash on wall .

All as per item No 01 above but applying two coats of white wash and ditto.

All as per item No 01 above but applying one coat of white wash on ceiling.

All as per item No 01 but applying two coats white washing on ceiling.

M&L for Preparation of old painted surfaces of wood based surfaces of any description over 10 cms width or girth and applying one coat of synthetic enamel paint , complete all asspecified.

All as per item No 05 above but applying two coats of synthetic enamel paint –ditto-.

Preparation of wire mesh surfaces by brushing and applying a coat of synthetic enamel paint on GI wire mesh complete (measured over all one side only).

M&L for Preparation of old painted surfaces of steel of any description over 10 cms width or girth and applying one coat of synthetic enamel paint complete all as specified.

All all as per item No 08 above but applying two coats of synthetic enamel paint –ditto-.

Complete removal of existing old treatment on surface from walls with machenical scraper (machine) complete all as specified and directed.

M& L a coat of alkali resistant primerover alread prepred surface of external walls complete all as specified and directed.

M& L for preparing the entire surface with applying 2-3 mm thick wall care putty on internal walls/ ceiling surface finished even and smooth complete all as specified and directed.

M& L for applying two coats of oil bound distemper on wall/Ceiling surface with roller brush complete all as specified and directed.

M & L preparing old surface including washing, rubbing, filling holes,and uneven surface finishing old surfaces even and smooth with Wall care putty/POP, and surface shoulld be even and smooth applying one coat of oil bound distemper on wall surfaces with roller brush of complete all as specified

Complete removal exising treatment of old/ new surfaces of wall scrubbing by machenical scrapper (machine) with hard brushing ,brooming down or steel wire brushing scraping down smoke root mould moss and efforescent salts and treating oil and greasy spots as applicable and washing with water and applying Two coats of weather proofing exterior acrylic emulsion paint of DULUXWeather shield Max or APEX ULTIMA from Asian paint or equivalent over one coat of primer from the same manufacturer even and smooth with roller brush complete all as specified and directed.

Demolition of Brick work of stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles

M&L for brick work with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick walls with old size bricks, built in cement mortar 1:4, complete all as specified.

M&L for brick work with sub class 'B' brick straight or curved on plan exc 6 metre mean radius with old size bricks, built in cement mortar 1:6, complete all as specified.

All As per item no 18 before but except bricks

Taking down cement plaster of any description on brick stone or concrete walls surfaces including raking out joints hacking for keys scrubing down with water etc complete all as specified and directed

M&L for rendering 15mm thick in CM 1:4 on fair faces or other than fair faces of brick work or concrete surfaces firnished even and smooth without using extra cement up to hieght of four storey ,including scaffolding complete.

M&L for rendering 15mm thick in CM 1:6 on fair faces or other than fair faces of brick work or concrete surfaces of walls firnished even and smooth without using extra cement in multistorey building ,complete all as directed.

M&L for 5mm thick rendering in cement mortar 1:3 finished even and smoothe surface without using extra cement on ceiling, chajja in multy storey building etc complete all as specified.

Supply only integral water proofing admixture of approved quality.

M&L preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of cement primer complete all as specified and directed.

Material and labour for preparation of new plastered surfaces as of walls and applying Two coats of weather proofing exterior acrylic emulsion paint of DULUXWeather shield Max or APEX ULTIMA from Asian paint over one coat of primer from the same manufacturer white lime wash complete all as specified and directed.

M&L for new plaster surface two coat of oil bound destemper over 3mm thick of birla white putty including preparation of newly plastered surface etc all as specified.

Hacking out old broken glass of any thickness size quality or description frame wooden frames /Aluminium frame fixed with wooden beads/aluminium beads and M&L 5.5 mm thick sheet galss ordinary quality and glazing with wooden bead/aluminium beads, complete all as specified

S & Fin repair 1000 ltr capacity three layer white colour rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling old water tank all as specified in SSR Part I.

S & F in repair 500 ltr capacity three layer white colour rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling old water tank all as specified in SSR Part I I

Taking down chowkhat or frame not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame).

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded Complete all Specified and directed.

All as per Srl item No 32 above but without glazing bars

S&F for Chimney bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165.

Demolition of cement concrete (Un reinforced) in ground floors n.exc 15cm thick (above or below grnd level) complete all as specified.

Dismantling floor, hearth or wall tiles including cement mortar concrete bedding amd removing rubbish off the premises complete all as specified and directed.

M & L for 75mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection laid in bays & surfaces finished fair and even without using extra cement, complete all as specified.

M&L 25mm thick cement concrete type B-O, 1:2:4 (12.5mm graded agg ) as in floors finished even and fair complete all as specified and directed.

M&L Non skid cerermic joint free coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc. 0.06 sqm but n.exc. 0.11 sqm, in neat cement slurry and pointed in white or coloured cement with pigment to match over 15mm thick screed bed in cement mortar (1:6).

All as item No 39 above but as in skirting over rendering 10mm thick in cement mortar 1:4.

M&L Vitrified ceramic Light shade coloured tiles 10mm thick square/rectungular polished area of each tile not exceeding o.36 Sqm in floor etc set and jointed in neat cement sluarg and painted in white or coloured cement to match laid over 15mm thick screed bed of cm 1:6 .

All as item No 41 above but as in skirting over rendering 10mm thick in cement mortar 1:4.

M&L Glazed ceramic coloured tiles (400X350mm) x 7mm thick on vertical surfaces etc, set and jointed in neat cement slurry and pointed in white cement to match the shade of tile over 10mm thick rendering of in cement mortar 1:4.

Taking down chowkhat or frame exceeding 1.5 Sqm each and not exceeding 4 Sqm each sqm each with shutter (without taking off shutter from the frame) complete all as specified.

Taking down chowkats or frames exc 4 Sqm but not exc. 6 sqm each with shutters (without taking off shutters from frames ), complete all as specified.

Taking down shutters of any desciption area exc 1.0 Sqm but n.exc 2.0 Sqm each and removing to or from store.

Supply and fixing factory made uPVC white colour Three track panels sliding door with fly proof S.S wire mesh (two Nos, glazed & one no. wire mesh panels) made of (big series) frame 116x45mm & sash 46x82mm both having wall thickness of 2.3+_ 0.2mm and single glazing bead/double glazing bead of appropriate dimension. (Area of door above 2.00sqm upto 5sqm comprising of upvc chamfbered frame, with in built roller track and sash extruded profiles duly reinforced woth 1.60+_ 0.2mm thick galvanised mild steel section maid from roll forming process of required length (shape & size according to upvc profile) Appropriate dimension oupvc extruted glazing beads, uPVC extruted interlock and uPVC extruded line sash adaptor (if required), EPDM gasket, wool pile, zinc alloy(white powder coated) handle with key on one side of extreme panels alongwith zinc plated mild steel multi point looking having tansmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required). stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120kg) GI fastners 100X8mm size for fixing frame to finished wall and necessary stainless steel screws etc. profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and dirtected by engineer-in charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sah extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be acceptable but no extra payment on this account shall be made.

M&L for Plain, solid, straight chowkats and frames made of 2nd class hard wood (sal), wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, supplied and fixed,making good , complete all as specified and as directed by Engineer-in-Charge.

S&F pressed steel frames,size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete ,as specified.

S&F pressed steel frames,size 125 X 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc.

Providing cement concrete type C-0 1:3:6 (12.5 mm graded agg) as for pressed steel chowkhats.

S&F for 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

M&L for 35 mm thick 2nd class hard wood glazed and skelton door shutter, factory made, open rebated and prepared to receive glass/guage etc. (without sash bar) edge of frames plain, chamfered or rounded, fitted with cut & mitred beads for securing glass/guage etc size of member as specified in SSR Part I Section 8 clause 20(a) and fixed to chowkat, complete all as specified.

S&F powder coated Anodiesed aluminium frame for partition, doors, windows, ventilators with one or more rebates incl. joining cleat for fixing etc. complete all as specified.

S&F powder coated Anodiesed aluminium door shutters, aluminium section weighing 0.55 Kg/m incl. necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each doors,Brass 2 lever mortice lock verticle type size 100mm, hinges, anodiesed aluminium snap beading screw with etc.

S&F solid PVC door frame of sixe 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per specification and drawing.

S&F factory made soilid panel PVC Door shutter 30mm thick (Stype) both side prelam clouor consisting of frame made out MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having PVC sheet stripof 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail, & bottom rail; Panneling of both side prelam clouor PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing.

S&F 4.8 mm thick sheet glass, ordinary quality and glazing in Aluminium door with solar control files 50 micron in squares exc 0.5 Sqm each pane.

Supply and fixing PVC wall lining consisting of 5mm thick printed colour PVC sheet inclusive of solvent cement and fixing on PVC frame /Aluminium door at site etc complete all as specified and as directed by Engineer-in- charge.

S&F in repair door closer aluminium (extruded section) hydraulically regulated designation No. 03, universal type, suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 Kgs.

S&F 150mm long extruded alumiunium alloy handle fabricated type anodized (D type).

S&F 100 mm long (size) butt hinges medium weight, cold rolled, mild steel, complete all as specified(Fixing included in item 43 here-in-before).

S&F for 150 mm size aluminium, anodised barrel tower bolts of extruded section and fixed to shutter complete.

S&F for MS 300mm size, door spring Pencil type rat tail rod pattern springs including roller and roller plate complete.

S&F for 100 mm size long mortice lock vertical type ,4 levers with key in duplicate, brass body with brass two nos handle fixed in shutters with screw complete all as specified

Supply&fix in repairs two legged aluminium floor door stopper with rubber shoe 140mm long complerte all as specified and directed by Engineer-in-Charge.

S&F for galvanized stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm dia fixed with stainless steel wire staples including beading complete all as specified and as directed .

M&L two coats of synthetic enamel painting on wooden surfaces not otherwise described over 10cm width or girth over a coat of pink primer inclding prepration of newly untreates surfaces complete all as specified and directed.

Taking up or down steel tubing 15mm bore and connections, including cleaning for refixing or removal to store and S&F 15mm GI tubes, medicum grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors.'

All as per item No 69 above but 20 mm bore.

S & F in repair Harrison rails, anodised aluminium alloy 20mm dia with fixing brackets,stops, rollers etc.complete all as specified and directed.

Dismantling boarding any description and in any position fixed with nails.

S&F 18/19mm pre-laminated particle board, interior grade, pre-leminated one side with decorative choice lamination & other side balancing white lamination fixed with screws, or with piano hinges to timber frame work complete all as specified and directed.

S&F in repairs PVC valve less, syphonic action type low level flushing cistern of capacity 10 Ltrs with inlet, ball valve, float and handle and fixed to IWC on existing brackets, fixed in repairs.

S&F in repair chlorium plated shower roses with or without swivel join ts 100mm size incl fixingto steel pipe in repairs

S&F in repair vitreous china wash basin with vitreous China Pedastal, white, flat back, size 550 x 400mm, fixed on existing brackets incl 32mm bore CP waste coupling.

S&F in repairs CP bib taps 15mm dia cast copper alloy with crutch or half lever handle fixed in repairs.

S&F in repair 15mm bore stop valve/angle valve cast copper alloy chromium plated fancy type screwed down, high pressure, with crutch or butter fly handles fixed in repairs.

All as per item No 79 above but concealed type with long shank and cup.

S&F in repairs viterous china squartting pan orrisa pattern , size 580x 440mm white, interged foot rest including connection to trap and to flush pipe, anti syphonic pipe etc complete making good to floor.

S&F in repair viterous china ware wash down water closet pan (Pedestal Pattern) white including plastic seat and cover with MS CP hinges fixed in repairs.

S&F in repairs combined viterous china ware wall hanging wash down water closet pan (Pedestal Pattern) coloured and plastic seat and hydraulic cover with MS CP hinges, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe. Etc attached connected vitreous china valveless, syphonic action type, 06 ltrs capacity, low level flushing cistern, white with inlet, ball valve, float and handle.

S&F in repair plastic water closet seat cover of any colour closed pattern with flat bottom and cover with mild steel chromium plated hinging device etc complete as specified and directed.

S & F in repair toilet paper holder with flat recessed type stainless steel complete all as specified and directed.

S & F in repairs Chromium plated health faucet (hand spray) with 1mtr long PVC flexiable pipe 15mm bore and fixed to in position etc complete all as specified and directed.

S&F in repair super flush siphon for low level single or double action flushing cistern complete set (excluding float valve PVC handle) all as specificed and directed.

S&F in repair cast copper alloy chromium plated fancy type single lever basin mixer .

S&F in repairs stainless steel sink with drainage board made out of 1.00mm thick sheet for kitchen or laboratory, with plug, waste pipe, washers incl. cantiliver cast iron brackets, connecting union etc overall size 915mm X 420mm with bowl size 410mm X 330mm X 160mm.

S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 485mm x 420mm bowl size 410mm x 3330mm x 160mm.

Supply only MS but hinges 100mm

Checking electrical points for continuous electric supply system and replacement of unserviceable spares for all electrical fixtures, ceiling/exhaust fans of any size and capacity and carrying out minor repairs, fixing screws, tightening of loose wires, any type renewal of small pieces of electric wire upto 1.00 mtr length and maintenance work complete on all working days including holidays all as directed by Engr-in-charge, at Trg area & DK-2 JCOs/OR md accn and adjoining area.

Attending to complaint of unsv switch ,socket ,fan regulator and making of light / power point in casing caping upto 2 mtr of length and maintenance work complete on all working days including holidays all as directed by Engr-in-charge, at Trg area & DK-2 JCOs/OR md accn and adjoining area.

Attending to Geyser complaints at site including checking and rectification of any electric fault/ water leakage and making good in all respects including minor repairs, replacement of unserviceable spares, burnt copper wire connections wherever required and repairing any type of switch, socket, plug top etc complete all as specified and directed. Notes for Item No. 92, 93 & 94 (a) fixtures / fittings shall be paid under relevant item against supply only. (b) Contractors are advised to visit the sites before quoting their rates. (c) Materials for minor and maintenance repair works as directed by Engineer-in-Charge shall be supplied by the contractor within one week from the date of issue of work order. (e) Contractor shall provide and deploy adequate experienced professional to carry out day to day complaints and must deploy 01 electrician and 01 helper at Trg area & DK JCOs/OR qtrs and adjoint area from 0900Hrs to 1700 Hrs from Monday to Sunday. Electrician and helper shall report to complaint cell at 0900 hrs daily and get the job card for carry out the work and same will be retrun to concered JE at 1700 hrs as token of completion of job. In case of any breakdown/ emergency, contractor shall make arrangement to attend and rectify the complaints in odd hours on sunday/ holiday also. The rates quoted in sch 'A' respective items shall be deemed to be included and nothing extra shall be admissible on this account. Note: whatever be the nature of electrcal complaint the wholesole rectification responsibilty lies with the contractor. (f) Contractor shall be penalised @ Rs. 100/- per complaint per day, if he fails to attend the complaint within 4 hours. (g) All ser numbered complaint docket will be provided by contractor and amount of docket included in this. (h) Daily attendance register will be maintained by conserned JE and if any electrician/ helper found absent on any working day then penalty @Rs 1000/- per day per workman will be recoverd from the contractor.

Attending to electrical complaint of no light / short circuit in light or power circuit / MCCB tripping or any other emergency nature complaint during night hours (from 09 pm to 05 am). Notes for Item No. 95 (a) fixtures / fittings shall be paid under relevant item against supply only. (b) Contractors are advised to visit the sites before quoting their rates. (c) Materials for minor and maintenance repair works as directed by Engineer-in-Charge shall be supplied by the contractor within one week from the date of issue of work order. (e) Contractor shall provide and deploy adequate experienced professional to carry out day to day complaints and must deploy 01 electrician at Trg area & DK-2 JCOs/OR md accn and adjoining area. from 2100 Hrs to 0500 Hrs from Monday to Sunday . Electrician shall report to complaint cell at 2100 hrs daily . In case of any breakdown/ emergency, contractor shall make arrangement to attend and rectify the complaints in odd hours on sunday/ holiday also. The rates quoted in sch 'A' respective items shall be deemed to be included and nothing extra shall be admissible on this account. Note: whatever be the nature of electrcal complaint the wholesole rectification responsibilty lies with the contractor. (f) Contractor shall be penalised @ Rs. 100/- per complaint per day, if he fails to attend the complaint within 4 hours. (g) Daily attendance register will be maintained by converned JE and if any electrician/ helper found absent on any working day then penalty @Rs 1000/- per day per workman will be recoverd from the contractor.

Supply only switch piano flush button type single pole one way 6 Amps all as specified.

Supply only switch piano 6 amp SP two way, ISI marked .

Supply only socket piano outlet 6 Amp flush button type all as specified.

Supply only bell push single pole 6 Amps all as specified.

Supply only switch piano flush button type single pole 16 Amps..

Supply only socket piano outlet, 2 in 1, 3 pin 6 and 16 Amp single pole .

Supply only Ceiling fan regulator electronic step switch type/socket type, suitable for 1200/1400 mm sweep ceiling fan, 230 Volts single phase complete.

Supply only ceiling rose surface PVC type with three terminals.

Supply only Electric bell Ding-Dong AC 230 Volt etc complete all as specified and directed.

Supply only insulated body, angle holder (metal ring) with back plate ISI marked complete all as directed.

Supply only industrial metal clad plug top, 3 pin, 10amp / 20 amp (ISI marked) as directed.

Supply only industrial metal clad socket 3 pin 10 amp / 20 amp (ISI marked) as directed.

Supply only relacement plug top 16 Amps 3 pin 230- volts.

Supply only LED batten luminaire surface mounted, 4 feet system wattage not less than 20 Watts, > 2400 systems lumen outputwith lifetime of 50000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 6500K, surge protection 2.5KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed.

Supply only LED batten luminaire surface mounted 2 feet system wattage of 10 watts and not less than 1000 lm with life time of 50000 burning hours with 70% of its initial lumen maintained. CRI > 80, power factor > 0.95, THD < 10%, color temperature > 6500 K , surge protection 2.5 KV in CM IP- 20 protected meets LED IS specifications, voltage range - 150 to 270 volts AC, temperature range 0 to 50 Degree C, system efficiancy at luminarie level ≥100 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire fixed complete all as specified and directed.

Supply only LED 9/10 watts bulkhead fitting with powder coated die cast aluminium housing with glass/ non yellowing polycarbonate cover, IP65 Protection, System level efficacy of the Luminary is > 90 lm/W with a life class of 50,000 burning hours at L70 criteria, Power Factor >0.95, driver with Voltage range 150-270V, Temperature range 0 to 50 Deg, Driver efficiency >85%, THD<10%, CRI>80, Color Temperature-6000K, Surge protection of 2.5 KV, including connecting up with necessary PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete all as specified and directed.

Supply only surface ceiling mounted, round LED down light fitting 12 watts with die cast aluminium housing and system wattage of 12W, system efficacy at luminary level ≥ 80 Lumens/watt, 50000 burning hours, 6500K color temperature with CRI >80, Power Factor > 0.90, Driver should meet IEC compliant for safety with multi stage high Isolate CC-CV operated driver with voltage variation range - 150 to 270 Volts AC, and surge protection of 2.5 KV, and including connecting up with PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete all as specified and directed.

Supply only in replacement of decorative type wall mounted luminaire (Comet) with unbreakable poly carbonate materials suitable for 1x14 watt LED bulb B22 base.

Supply only 14W LED Bulbs, high energy efficiency LED luminaries to be fitted on existing holders 240 V,50 Hz

Supply only 9 W LED Bulbs, high energy efficiency LED luminaries to be fitted on existing holders 240 V,50 Hz,

Supply only MCB SPN 40 Amps 240 volts 10 KA 50 HZ 'C' curve complete.

Supply only MCB DP 20 Amps 240 volts 10 KA 50 HZ 'C' curve complete.

Supply only MCB SP 6-32 Amps 240 volts 10 KA 50 HZ 'C' curve complete.

Supply only MCB DP 63 Amps 240 volts 10 KA 50 HZ 'C' curve complete.

Supply only MCCB 160 Amps, FP 415 volts 16 KA 50 HZ with thermal magnetic setting

Supply only MCCB 125 Amps, FP 415 volts 16 KA 50 HZ with thermal magnetic setting .

Supply only single pole and neutral enclosure with a two pin earth plug and socket complete with one single pole MCB SP 20 Amp complete all as specified and directed.

Supply only PVC Gang box surface type heavy duty suitable for single switch 5 Amps (ISI Marked) .

Supply only Gang box surface type heavy duty suitasble for 15 Amps switch and socket (ISI Marked)

Supply only replacement white cover plate with frame 1 module/ 2 module complete all as specified and directed by Engineer in charge.

Supply only replacement white cover plate with frame 3 module complete all as specified and directed by Engineer in charge.

Supply only replacement white cover plate with frame 6 module complete all as specified and directed by Engineer in charge.

Supply only replacement white cover plate with frame 8 module complete all as specified and directed by Engineer in charge.

Supply only hylum sheets 3 mm thick (ISI marked) of the following sizes .

(a) Sheet 4" x 4" single cutting suitable for one piano switch

(b) Sheet 4" x 4" two cuttings suitable for two piano switches

(c) Sheet 4" x 7" three cuttings suitable for three piano switches

(d) Sheet 4" x 7" one cutting for 6 Amp socket and two cuttings for piano switches

(e) Sheet 8" x 10" incl cuttings for switches and sockets 6/16Amps as directed.

(f) Sheet 10" x 12" incl cuttings for switches and sockets 6/16Amps as directed.

Supply only replacement of capacitor 3.15 Mfd, 240 V complete all as specified and directed.

Supply only replacement of capacitor 2.5 Mfd, 240 V complete all as specified and directed.

supply only hole fastner madeup of MS 6" long with complete nut bolt all as specified.

supply only hole fastner madeup of MS 4" long with complete nut bolt all as specified.

Supply only heating element of 2 KW any type with nut bolt washer complete all as directed.

Supply only heating element of 1.5 KW any type with nut bolt washer complete all as directed.

Supply only non return valve 15mm dia (ISI Marked) for geysers of 50/35/25 Ltr capacity including GI Socket,Nipple, elbow ,bend etc and connecting up complete all as directed.

Supply only for safety pressure valve of size 15 mm dia, ISI marked for geysers complete all as directed by Engineer-in-charge.

Supply only thermostat for 25/35/50 ltrs capacity of geysers complete all as directed.

Supply only SS braided pipe of 12 mm ((internal) suitable for hot/cold water, 60 cm long with brass nuts and rubber washers complete all as specified and directed.

Supply only FRLS insulated single core unsheathed multistranded copper conductor 1100 volt 1.5 sqmm with approved colour code completed all as specified.

Supply only FRLS insulated single core unsheathed multistranded copper conductor 1100 volt 2.5 sqmm with approved coloured code completed all as specified.

Supply only FRLS insulated single core unsheathed multistranded copper conductor 1100 volt 4 sqmm with approved coloured code completed all as specified.

Supply only FRLS insulated single core unsheathed multistranded copper conductor 1100 volt 6 sqmm with approved coloured code completed all as specified.

Supply only FRLS insulated single core unsheathed multistranded copper conductor 1100 volt 10 sqmm with approved coloured code completed all as specified.

Supply only replacement copper cable flexible 3 core PVC insulated of size 23/.0076 ll as specified and directed by Engr-in-Charge.

Taking down sub main wiring off sizes etc complete all as specified and directed.

Supply, laying and drawing in existing concealed PVC rigid surfaces as per existing surfaces or as directed on walls 02 runs of 4.00 sqmm (Main Cable and neutral) and one run of 4.0 sqmm (as earth wire) of stranded copper conductor PVC insulated unsheathed cables of 1100 volts grade conforming to IS : 694 of 1990 complete including connection all as specified and directed.

Recess mounting LED flat panel 2'x2' made of CRCA sheet steel housing duly powder coated with high efficient LEDs & glare free with UGR less than 19 opal/Prismatic diffuser life time 50000 hr efficacy 120lm/Watt voltage range 120 to 270 V high surge protection CCT 4000-6500K THT less than 10% not less than 30 W as directed by Engineer-in- Charge.

Supply, laying and drawing in existing concealed PVC rigid surfaces as per existing surfaces or as directed on walls 02 runs of 6.00 sqmm (Main Cable and neutral) and one run of 6.0 sqmm (as earth wire) of stranded copper conductor PVC insulated unsheathed cables of 1100 volts grade conforming to IS : 694 of 1990 complete including connection all as specified and directed.

Supply, laying and drawing in existing concealed PVC rigid surfaces as per existing surfaces or as directed on walls 02 runs of 10 sqmm (Main Cable and neutral) and one run of 10 sqmm (as earth wire) of stranded copper conductor PVC insulated unsheathed cables of 1100 volts grade conforming to IS : 694 of 1990 complete including connection all as specified and directed.

Schedule of Credit

a.k constructions

imran construction company

JYOTI ENTERPRISES

GIAN ENGINEERS

Pall Associates

LAMBA ENTERPRISES

POONAM ENTERPRISES

M/S MSD & Associate