Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹15.3 LAccepted-AOC | L-1 | Accepted-AOC Lowest Bidder | |
| 2 | L-2₹16.3 L+₹1.0 L (6.55%)Rejected-AOC | L-2 | Rejected-AOC Other than lowest bidder | |
| 3 | L-3₹16.8 L+₹1.4 L (9.34%)Rejected-AOC SHAKTI NAGAR UDHAMPUR TEH DISTT UDHAMPUR JAMMU KASHMIR 182101 | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L-3 | Rejected-AOC Other than lowest bidder | |
| 4 | L-4₹18.8 L+₹3.5 L (22.5%)Rejected-AOC VILL RANIA GT ROAD DHARIWAL DISTT GURDASPUR PB PIN 143519 | GURDASPUR | PUNJAB | 143519 | L-4 | Rejected-AOC Other than lowest bidder |
Tender Value
Refer Docs
EMD Value
₹44,000
Closing Date
28 Sept 2021, 6:00 pmClosed
LT COL RAM G
GE Kaluchak Pin-900673 C/O 56 APO
REPAIR STEEL FURNITURE AT KALUCHAK MIL STN UNDER GE KALUCHAK
2021_MES_469679_1
GE/KC/NIT-29/2021-22
Open Tender
Miscellaneous Works
Item Rate
180 days
Kaluchak
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE Kaluchak
₹44,000
Yes
29 Oct 2021
21 Aug 2021
8 Oct 2021
21 Aug 2021
28 Sept 2021
4 Sept 2021
21 Aug 2021 - 30 Aug 2021
Amount
CHAIR WRITING, CHAIR VISITORS :- FD/E6/MAP/12, GODREJ, ROYAL Supplying & fixing the following parts in replacement of the old existing unserviceable parts of the chair as approved, shown on drawing & as directed by Engr-in-Charge :-
Seat & back of 12 mm thick hot pressed plywood upholstered with fabric & moulded polyurethane foam. The back foam shall be designed with contour lumber support with PVC lipping all around. The cushions shall be of 40 density, 75mm thick for seat & 50 mm thick for back alongwith the fabric of approved quality & color complete all as directed by Engr-in-Charge.
Handrest to match with existing all in shape, size, material & quality.
Rubber stoppers.
CHAIR COMPUTER, CHAIR REVOLVING EXECUTIVE (HIGH / LOW BACK), CHAIR REVOLVING WITH & W/O ARMS :- GODREJ, FD/E6/MAP/01, ROYAL Supplying & fixing the following parts in replacement of the old existing unserviceable parts of the chair as approved, shown on drawing & as directed by Engr-in-Charge :-
Seat & back of 12 mm thick hot pressed plywood upholstered with fabric & moulded polyurethane foam. The back foam shall be designed with contour lumber support with PVC lipping all around. The cushions shall be of 40 density, 75mm thick for seat & 50 mm thick for back alongwith the fabric of approved quality & color complete all as directed by Engr-in-Charge.
Castor wheels as per the approved sample.
Handrest to match with existing all in shape, size, material & quality.
Pedestal assembly all matching the shape, size & quality of the previous.
Servicing of synchro tilting mechanism & making it functional including supplying and fixing of necessary parts as required to make it functional.
ALMIRAH LARGE STEEL WITH SHELVES, ALMIRAH STEEL 1/2 HANGING 1/2 SHELVES, FD-1031 & 1033 Supplying & fixing the following parts in replacement of the old existing unserviceable parts of the almirah as approved, shown on drawing & as directed by Engr-in-Charge :-
Shelves with appropriate nuts bolts all as specified and directed by Engineer-in-Charge.
Locks (Make-HARRISON-CUPBOARD BRASS SSK LOCK 2T/GODREJ-UNIVERSAL DRAWER CUPBOARD LOCK/LINK-UNIVERSAL CUPBOARD LOCK), 6 levers Godrej pattern with duplicate key & hole cover.
Steel anodized / CP handles 4” grip, decorative type as approved.
Hanging rod 20 mm dia, 1.6mm thick CP steel conduit pipe with sockets/brackets.
Material & labour for denting & painting the Almirah both internally and externally with synthetic enameled paint of BLACK/BROWN colour with SPRAY GUN after properly smoothening the surface with the help of an electric grinder, applying putty on dents and providing a coat of primer, complete all as specified and directed by Engineer-in-Charge. Note : Arrangements shall be made by the contractor for painting in the units as directed by Engr-in-Charge.
ALMIRAH MEDIUM/SMALL STEEL W/SHELVES ALMIRAH MEDIUM/SMALL STEEL 1/2 HANGING 1/2 SHELVES : FD-1032 Supplying & fixing the following parts in replacement of the old existing unserviceable parts of the almirah as approved, shown on drawing & as directed by Engr-in-Charge :-
Shelves
Locks (Make-HARRISON-CUPBOARD BRASS SSK LOCK 2T/GODREJ-UNIVERSAL DRAWER CUPBOARD LOCK/LINK-UNIVERSAL CUPBOARD LOCK), 6 levers Godrej pattern with duplicate key & hole cover.
Steel anodized/ CP handles 4” grip, decorative type as approved.
Hanging rod 20 mm dia, 1.6mm thick CP steel conduit pipe with sockets/brackets.
Material & labour for denting & painting the Almirah both internally and externally with synthetic enameled paint of BLACK/BROWN colour with spray gun after properly smoothening the surface with the help of an electric grinder, applying putty on dents and providing a coat of primer, complete all as specified and directed by Engineer-in-Charge. Note : Arrangements shall be made by the contractor for painting in the units as directed by Engr-in-Charge.
TABLE DINING OR's(900X900mm): FD-1009 Supplying & fixing the following parts in replacement of the old existing unserviceable parts of the Table Dining ORs as approved, shown on drawing & as directed by Engr-in-Charge :-
Top of PRELAMINATED MDF board 18/19mm thick with matching PVC edging in shade as approved covering both the faces.
Material & labour for painting all over the steel structure with synthetic enameled paint of BLACK/BROWN colour with spray gun after properly smoothening the surface with the help of an electric grinder, applying putty on dents and providing a coat of primer complete all as specified & directed by Engineer-in-Charge. Note : Arrangements shall be made by the contractor for painting in the units as directed by Engr-in-Charge.
Hard rubber shoes for legs
TABLE OFFICE CLERK STEEL : FD-1004 & 84 Supplying & Fixing the following parts in replacement of the old existing unserviceable parts of the Table as approved, shown on drawing & as directed by Engr-in-Charge :-
Top of PRELAMINATED MDF board 18/19mm thick with matching PVC edging in shade as approved covering both the faces.
Material & labour for painting all over the steel structure with synthetic enameled paint of BLACK/BROWN colour with spray gun after properly smoothening the surface with the help of an electric grinder, applying putty on dents and providing a coat of primer complete all as specified & directed by Engineer-in-Charge. Note : Arrangements shall be made by the contractor for painting in the units as directed by Engr-in-Charge.
Hard rubber shoes for legs.
LOCKER BEDSIDE STEEL :FD-257 Supplying & fixing the following parts in replacement of the old existing unserviceable parts of the Locker as approved, shown on drawing & as directed by Engr-in-Charge :-
Hasp & staples 75mm long as per drg.
Mild steel CP handles high quality 100mm long as per drg.
CP steel conduit 19/20mm dia hanging rod with brackets 16 guage as per drg.
Material & labour for painting all over the steel structure with synthetic enameled paint of BLACK/BROWN colour with spray gun after properly smoothening the surface with the help of an electric grinder, applying putty on dents and providing a coat of primer complete all as specified & directed by Engineer-in-Charge. Note : Arrangements shall be made by the contractor for painting in the units as directed by Engr-in-Charge.
TABLE 3'X2' WITH DRAWER & W/o DRAWER STEEL : FD-1008 & 1007 Supplying & fixing the following parts in replacement of the old existing unserviceable parts of the Table as approved, shown on drawing & as directed by Engr-in-Charge :-
Top of PRELAMINATED MDF board 18/19mm thick with matching PVC edging in shade as approved covering both the faces.
Material & labour for painting all over the steel structure with synthetic enameled paint of BLACK/BROWN colour with spray gun after properly smoothening the surface with the help of an electric grinder, applying putty on dents and providing a coat of primer complete all as specified & directed by Engineer-in-Charge. Note : Arrangements shall be made by the contractor for painting in the units as directed by Engr-in-Charge.
Hard rubber shoes for legs.
CHAIR VERANDAH FD-333,256 Supplying & fixing the following parts in replacement of the old existing unserviceable parts of the chair verandah as approved, shown on drawing & as directed by Engr-in-Charge :-
Recanning the chair with plastic cane 3.5mm to 4mm wide, 0.4 mm thick half round, white/cream colour, (MAT Pattern), complete all as specified & directed. Note : Canning shall be done only after painting.
Painting to frame of the chairs by one coat of synthetic enamel paint of white of approved quality over a coat of primer after scrapping off the existing worn out paint with an electric grinder, applying putty and providing a coat of primer, complete all as specified & directed by Engineer-in-Charge.
Rubber/PVC shoes for legs.
M/S Shesh Paul Gupta
VEE KAY IND
M/S NEW SUBBERWAL FURNISHERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .