SPECIAL REPAIR TO BLDG NO TW 11 (AIR FIELD AREA) MCTE AND SPECIAL REAPAIR TO TRANING INFRASTRUCTURE IN FOOTBALL FIELD OF CTW MCTE UNDER GE(MCTE) MHOW

Amount

Dismantling Asbestos Cement Corrugated or Semicorrugated in Roof covering all as specified and directed.

Dismantling/ wall and ceiling boards (fibre pulp, insulation etc) or insulation boards/ slabs complete all as specified and directed.

Dismantling fillets, rails, posts, rafters, purlins, etc under 40Sqcm in section all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving n.exc 15cm thickness (below or above GL) as in plinth protection/path/Hard standing/floor etc. complete and removal of debris outside MD land all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc. complete and removal of debris outside MD land all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors/ walls laid bedded and pointed in any mortar all as specified and directed.

Taking down Cement Plaster of any description on Brick Walls, Concrete Surfaces including Racking out Joints, hacking for Key, scrubbing down with Water, etc. complete and removal of debris outside MD land all as specified and directed.

Demolition of brick work or PCC solid block or stone/boulder masonry built in cement mortar all as specified and directed.

Taking down shutter of any description exc 1 Sqm and n exc 2 sqm including easing & adjusting shutters and refixing in the same opening all as specified and directed.

Taking down chowkats or frames with shutters (with out taking off shutters from the frames) n. exc 1.50 Sqm each all as specified and directed.

Taking down chowkats or frames with shutters (with out taking off shutters from the frames) exc 1.5sqm but n. exc 4 Sqm each all as specified and directed.

Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each all as specified and directed.

S&F, Solid PVC Door Frame of size 50mm x 47mm made out of 5mm prelam PVC sheet and edges painted to match with reinforced with M.S. Square tube, suppling & fixing in opening as per manufacturer specification & drawing complete all as specified and directed.

S&F, Factory made solid panel PVC door shutter 30 mm thick consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15 x 15mm for top & bottom rails. M.S. frame shall have a coated of steel primers. MS frame covered with 5mm thick heat moulded PVC "C" channel of size 30mm thickness ,70mm width out of which 50mm shall be flat and 20mm tapered in 45 degree angle on either side forming styles and 5mm thick 95mm wide PVC sheet out of which 75mm flat and 20mm tapered in 45 degree on the inner side to from top and bottom rail and 115mm vide PVC sheet out of which 75mm flat and 20mm tapered on both sides to from lock rail . Top , bottom and lock rail provided either side of the panel 10mm (5mm x 2)thick ,20mm wide cross PVC sheet to be provided as gap insert for top rail & bottom rail. panelling of 5mm thick both side PVC sheet to be fitted with MS frame welded / sealed to the stiles & rails with 7mm (5mm + 2mm )thick x 15mm wide PVC Sheet beading to inner side and jointed together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the C channel using PVC solvent adhesive etc. suppling & fixing in the frame at site as per manufacturer specification & drawing all as specified and directed. Note : Steel butt hinges shall be measured & paid seperately.

S&F, Pressed steel frames for doors size 125x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

S&F, Pressed steel frames for doors size 105x60mm with one rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

S&F, 2nd class hard wood glazed and skeleton shutters (factory made), 35mm thick, open rebated & prepared to receive wire gauge (with sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitread beads for securing glass etc, sizes of members of shutters as specified in SSR Pt-I, section 8, clause 8.24- (a), supplied and fitted to chowkats all as specified and directed.

S&F, 35 mm thick second class hard wood rail and style plain framed factory made panelled shutter (two panel) with lock rail and panel of 12 mm BWP commerical ply . The size of rail and stile as per IS : 1003 (part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F, Providing and fixing pre painted steel sliding window 3-Track, 2 glass panel and 1 mesh panel sliding window fabricated from Roll formed sections made of galvanized Steel colour coated/powder coated (Base Steel as per IS 513 ‘D’ quality, galvanized as per IS 277 with zinc of 120 GM/Sq.mtr) with total coated thickness of 0.58mm. Primer coat with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick. Section for external frame of size 107x44mm, Section for shutter of size 35x49mm. Section of mesh of size 35 x 49 mm.The windows paneled with 5mm thick plain float glass. Corner bracket for internal and external frame made of glass filled nylon. Gaskets made of Ethyl Propylene Diamine Monomer (EPDM).The sections cut to length, joined and assembled by means of corner bracket. frames fixxed to the concrete/masonry walls by means of self expanding screws . Make : NCL Coloured GI Windows or approved equivalent make by GE.

S&F, Framed work such as grills, gratings, guard bars for windows, and ventilators, barred iron work, ladders, framework of water tanks and similar work all as specified and directed.

S&F, stainless steel wire cloth 0.45 mm nominal dia of wire and average width of aperature 1.40 mm fixed with wooden beeds all as specified and directed.

S&F, Butt hinges 100mm mild steel cold rolled, medium weight all as specified and directed.

Supply only 50mm steel butt hinges.

S&F, small fittings such as brackets of any type latch and hinges block shaped door and window stops and the like incl all necessary labour articles not ec 200 Cucm each in 2nd class hard wood all as specified and directed.

S&F, 150mm long aluminium handles, cast type anodized all as specified and directed.

S&F, 200mm long aluminium, anodized barrel tower bolts of extruded section all as specified and directed.

S&F, 150mm long aluminium, anodized barrel tower bolts of extruded section all as specified and directed.

S&F, 300mm aluminium alloy, anodized, sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as specified and directed.

S&F, door spring with 300mm mild steel rat rail rod pattern of standard quality including roller and roller plate complete all as specified and directed.

S&F, Mild steel work as in band, strap, hold fast, cleat, hook, hinges, base tie for door frame, support or stay for rain water pipe etc and other similar items conforming to Fe-410-0 or Fe-310-0 complete all as specified and as directed.

Cutting holes in stone/brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) exceeding half brick but not exceeding one brick all as specified and as directed.

M&L, Cement concrete (1:2:4), type B0 (using 12.50mm graded stone aggregate) for 25mm thick floor as in sub base for floor tiles base all as specified and directed.

M&L, Non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15 mm thick screed bed in CM (1:6) all as specified and directed.

M&L, for joint free coloured glazed ceramic tiles (colour as approved laid in pattern as approved by GE )size 300x 450mm x 7 mm thick on vertical surfaces such as dados and risers to step etc, set and jointed in neat cement slurry and pointed in coloured cement to match the tiles including 10mm thick rendering in CM (1:4) all as specified and directed.

M&L, for Joint free vitrified tiles of any colour 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick bedding layer in cement sand mortar (1:6) complete all as specified and directed.

M&L, for Joint free Vitrified ceramic tiles 10mm thick of any shade (square / rectangular) area of each tile as in as in skirting or on vertical surfaces, not exceeding 0.36 sqm, etc .set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 10mm thick backing coat in cement sand mortar 1:4 complete all as specified and directed.

M&L, for 75mm thick subbase ,cement concrete type D2,(1:4:8) using 40mm graded aggregate finished even and fair complete all as specified and directed.

M&L, for 300 x 300 x 15mm thick heavy duty ceramic floor tile laid in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over with and including 20mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L, 16 to 18mm thick Granite (of any type) work (table rubbed and polished and exposed visible edge moulding/rounding ) in steps, jambs, pillars, window cills, cooking platforms and like including 15mm thick cement mortar (1:4) screed bed and including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified and directed.

M&L, for 75mm thick cement concrete (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection finished even and fair incl cutting joints and filling with bitumen and sand mixture in (1:3) complete all as specified and directed.

M & L, for rendering 15 mm thick in cement mortar (1:6) on faces of brick work and finished the surface fair and even without using extra cement complete as specified and directed

M & L, rendering 15mm thick on fair faces of brick work or concrete surface in CM (1:4) surface finished even and smooth without using extra cement. Note :- Quoted rate included for rendering, chajja, parapet, curved surface etc complete.

M & L, for preparation of newly plastered surface and applying two coats of oil emulsion distemper over a coat of primer and two coats of cement base putty white or tinted (2mm thick) on wall surfaces complete all as specified and directed.

M & L, for two coats of weather proof paint on newly plastered external wall surfaces over a coat of primer and incl preparation of new plastered surfaces all as specified and directed

M & L, for complete removal of existing treatment and preparation of wall, by washing, scrubbing down and stopping of disterpered and painted surface old plastered/ decorated surface and applaying two coat cement base wallcare putty (2mm thick) for smooth finished of the surface and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and directed.

M & L, for complete removal of existing treatment and preparation of wall, washing, scrubbing down and stopping of old treatment and painted surface of plastered/ decorated surface and applying two coats cement base wall care putty (2mm thick) and two coats of weather proof paint over a coat of primer on wall surfaces complete all as specified and directed.

M & L, for Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tesile strength of 550 Mpa as in roof covering to wall, fixed with self tapping screws all as specified and directed.

M & L, for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in cladding to wall, and eves board fixed with self tapping screws all as specified and directed.

M & L, for Preparation of Old painted surface of Steel of any description and applying one coat of synthetic enamel paint over 10cm width or girth complete all as specified and as directed.

M&L,preparation of New Steel surface and applying two coats of synthetic enamel paint over a coat of red oxide over 10 cm width or girth all as specified and directed.

M & L, Preparation of New Wood surface and applying two coats of synthetic enamel paint over a coat of pink primer over 10cm width or girth all as specified and directed.

M&L, Preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat (finishing coat) of synthetic enamel paint all as specified and directed.

M & L, brick work in CM (1:6) , 23 cm thick and 15cm high along external walls to fill the gap including plastering 15mm thick in CM (1:6) to wall surface finished even and smooth without using extra cement all as specified and directed.

M&L, Providing and fixing in true horizontal level 600mm x 600mm, false ceiling system hot dipped galvanised steel section, exposed surface with pre-coated capping, main tee of size 24 x38 mm, having 0.25mm gauge at every 1200 mm centre to centre maximum and rotary stitched cross tee of size 24 x 38 mm having 0.25 mm gauge at every 600mm c/c and sub cross tee of size 24 x 38mm, having 0.25 mm gauge at 1200 mm c/c and wall angle of size 19 x 19mm, having 0.35mm gauge fixed to the periphery of the wall. The abovegrid is suspended at every 1200 mm c/c in both directions using 2.0mm thick pre-straightened GI wire. laying calcium silicate fissured pattern semi perforated butt edge ceiling tiles , of size 600mm x 60mm x 6mm having thermal conductivity K=0.15 W/mOK, having fire performance (BS-476) all as specified and directed.

S&F, in repair Stainless steel curtain rod/rail 25 mm dia complete all as specified & directed.

S&F, in repair Stainless steel curtain rod brackets 25 mm dia including necessary stainless steel clamp complete all as specified & directed.

Taking up or down steel tubing and connections for bore of tube 15 mm, complete all as specified and directed.

Taking up or down steel tubing and connections for bore of tube 20 mm, complete all as specified and directed.

S&F, of 20mm steel water tubing, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors all as specified and directed.

S&F, of 15mm steel water tubing, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors all as specified and directed.

Cutting chases in brick wall built in cement mortar for concealed water tubing and making good with cement mortar in (1:4),cutting depth not exc 10 cm as directed.

S&F, in repair Bib tap fancy type chromium plated with long shank with flange screwed for iron pipe 15mm bore, complete all as specified and directed (Make Jaquar cat part No DRC - 370370) or equivalent in approved make.

S&F, in repairs fancy type CP bib cock for kitchen sink of 15 mm bore complete all as specified and directed (Make Jaquar cat part No APR- 101347 or equivalent in approved make.

S&F, in repairs fancy type CP two way bib cock of 15 mm bore complete all as specified and directed (Make Jaquar cat part No DRC - 37041 or equivalent in approved make)

S&F, in repair Chrome Plated Swan Neck Tap , for WHB fancy type cast copper alloy, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed15 mm dia bore pipe. complete all as specified and directed (Make Jaquar cat part No CON-123BKN or equivalent in approved make.)

S&F, in Repair Stop valves/angle cock, 15mm dia pipe cast copper alloy, fancy type, chromium plated with long shank and cup screwed down, high pre-ssure, for iron pipe or for unions and fixed (Make Jaquar cat part No - FLR - 5053N or equivalent in approved make.)

S&F, Brass chromium plated corner glass shelf with bracket complete all as specified and directed .Make-Plumber cat No.U-0918 or equivalent in Jaquar /Parco/MARC/ESS as approved by GE

S&F, Sheet glass shelf assembly consisting of 5.5 mm thick glass shelf 120mm wide with chromium plted bracket gouard and railing 600 mm long all as specified and directed. Make-Plumber cat No.U-0918 or equivalent in Jaquar /Parco/MARC/ESS

S&F, in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F, in repairs vitreous china wash down water closet (Padestal Pattern) white/Coloured (excluding flushing cistern and flush pipe) including white/any colour PVC seat cover white closed pattern with recessed bottom and connection to drain or out going pipe and flushing pipe all as specified and directed.

S&F, in repairs 10 ltr capacity PVC Low level flushing cistern including 32mm dia PVC flush pipe, fixing in position with PVC connection pipe of 15mm x 600mm long etc complete all as specified and directed.

S&F, in repair vitreous china wash hand basin, oval type white ,flat back,size 550x400mm incl 32mm dia polythelene waste pipe and 32mm dia CP waste coupling, and incl bracket necessary packing and chain and plugs and porcelain stopper complete all as specified and directed.

S&F, in repairs kitchen sink stainless steel with draining board made of 1mm thick sheet with plugs,washer and waste including bedding in cement mortar or dwarf wall or cantiliver brackets and connectinng unions to pipe overall size 915x460mm ,bowl size 410x330mm x160mm complete all as specified and directed.

S&F, Stainless steel plate rack of size 750mm x 900mm x 250mm including fixed with rawl plug and screws on walls all as specified and directed.

Dismantling water tanks and removing to store exc 250 & n. exc 1000 litres capacity all as specified and directed.

S&F, Rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) tripal layer construction white colour hoisted and fixed in position all as specified in SSR Part I 1000 litres capacity.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning and removing all scale and dirt etc and hoisting if required and re-fixing in position exc 500 & n. exc 1000 litres capacity all as specified and directed.

S&F, in repair 20mm dia Ball valves,of PTMT high pressure, with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed.(Minimum weight 15 to 25mm to 142 - 455 gms) all as specified and directed.

S&F, in repair 20mm dia Gun-metal, golbe or gate valves, with iron wheel head, screwd both ends or iron pipe and fixed all as specified and directed.

S&F, in repair Sainless steel toilet paper holder of brass cromium plated fixed to walls with chromium plated (CP) brass screws all as specified and directed. (Make Jaquar cat part No .ACN - 1153N or equivalent in approved make.)

S&F, in repair brass chromium plated bottle traps for wash basins with inlet and outlet screwed for connection including necessary packing, union and cup and fixed 32 mm dia bore of trap all as specified and directed.

S&F, in repairs Shower rose with brass chromium plated shower rose with or without swivel joints, 125mm size including fixing to steel pipe or union all as specified and directed.

S&F, in repairs Brass chromiun plated tubular towel rail, 20mm dia ‘D’ type, 60CM long between flanges, fixed in repair all as specified and directed. (Make Jaquar cat part No - .ACN 1111NM or equivalent in approved make)

S&F, 15mm bore brass CP wall mixer for mixing hot and cold water screwed down with provision of over lead shower and cock for iron pipe and fixed complete all as specified and directed. (Make Jaquar cat part No - FUS-29273UPR or equivalent in approved make)

S&F, in repairs health faucet CP with connecting pipe 1 Meter long with stand (Make Jaquar cat part No - ALD - 565 or equivalent in approved make)

S&F, in repair 18mm thick factory made PVC sheet one side prelam sheet kitchen cabinet shutter .The 18mm thick sheet shutter bent at 90 degree and finish all edges at level for making edge lipping bending for 0.5mm thick PVC sheet lipping at all four edges using bonding tape etc. Complete all as per manufactures specification and as directed by Engineer in charge.

S&F, in repair Factory made PVC cabinet of required size fabricated by joining for 18mm thick PVC Celuka ply fixed with each other using solvent cement adhesive and screws and 18mm thick PVC sheet as backing of cabinet fixed with screw and solvent cement adhesive etc all as specified and directed.

S&F, in repair factory made PVC shelf /partition of required size consisting of panel of 18mm thick celuka PVC ply and for supporting the hold of shelf /partition and shall provided 3 edges in size 18mm x 18mm as per required length the front side of the edge visible in the front of the shelf / partition to be edge lipped by 18mm width x 1mm thick PVC Sheet of density 600 Kg/Cum manufactured by ISO 9001 - 2015 Cerfified campany , using solvent cement etc.complete as per manufacturers specification and drawings all as specified and directed.

S&F, stainless steel self closing hinge of 75 mm size for PVC door shutter complete all as specified and directed.

S&F, 50 X 15 mm size magnet door catcher for closing for PVC door shutter complete all as specified and directed.

S&F, 100 mm long size MS mat / glossy finish handle complete as specified and dirceted.

S&F, mild steel drawer cabinet channel for moving the drawer etc complete all as specified and directed.

S&F, modular type stainless steel basket size 24 x18 x 6 inches (dia of wire not less than 3.0mm) of any shape with side sliding roller clip and sliding rails on both side fixed with steel screws incl all fixing arranement complete all as specified and dirceted.

All as per item no 94.00 above but basket size 20 x18x 6 inches complete all as specified and dirceted.

S&F, in repair 110mm dia PVC (SWR) pipes single socketed in any length with rubber joints fixed to floor/ walls etc complete all as specified and directed.

S&F, in repair PVC (SWR) bends 110mm dia any radius with access door all as specified and directed.

S&F, PVC (SWR) junction single,(Single T) 110mm dia equal or unequal with access door all as specified and directed.

S&F, in repair PVC (SWR)vent cowl 110mm bore all as specified and directed.

S&F, in repair 75mm dia PVC (SWR) pipes single socketed in any length with rubber joints fixed to walls etc complete all as specified and directed.

S&F, repair PVC (SWR) bends 75 mm dia any radius with access door all as specified and directed.

S&F, in repair PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement etc complete all as specified and directed.

M & L, Machine cut mirror polished kota stone slab flooring with rounded edge 18-20 mm thick over cement screed bed (1:6) 15mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified and directed.

M&L, for cutting(7 cut) and mirror polishing of existing kota stone flooring using cutting machine, rubbing and polishing complete all as specified and directed.

M & L, for brick work in modular size with sub class "B" bricks straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L, Walling of random rubble masonry,uncoursed, well bonded, bedded and solidly hearted, built in Cement mortor (1 : 6) all as specified and directed.

All as per Srl item No 106.00 above but except stone all as specified and directed.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses all as specified and directed.

M & L, for Flush pointing to squared rubble masonry, coursed or uncoursed in CM (1:3) all as specified and directed.

M & L, for PCC (1:2:4) type B1 (20mm graded ) as in bonding stone, lintels upto clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including use and waste of form work all as specified and directed.

M & L, for Rendering 15mm thick on stone, masonary surfaces in cement mortar (1:3) finished even and smooth without using extra cement complete all as directed and specified.

M & L, for newly plastered surface and applying three coats of white wash on walls all as specified and directed.

M & L, for Cement concrete (1:2:4) type B0(using 12.50 mm graded stone aggregate ) 25 mm thick for leveliing floor surface finished even and fair complete all as specified and directed.

M & L, for 300 x 300 x 9 to 10 mm thick heavy duty ceramic floor tiles laid in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match existing over and including 20 mm thick screed bed in CM (1:6) complete all as specified and directed.

All as per Srl item No 114.00 above but in skirting /dado over 15 mm thick rendering in CM (1:4) all as specified and directed.

Excavation in trenches n.exceeding 1.50m wide and n.exc 1.50m depth for foundation etc or for shafts, walls, cess-pits, manholes, pier holes etc n.exc. 10 sqm on plan and n.exc. 1.5m in depth, getting out in soft/loose soil all as specified and directed

Excavating over areas, n exc 1.5 m deep and getting out in soft/loose soil all as specified and directed

Returning, filling in (soil) including spreading, leveling watering and well ramming in layers not exc 25 cm thick all as specified and directed.

Removing excavated materials to a distance exc 250m and n.exc 500m and depositing where directed all as specified.

M & L Moorum/red bajri filling under foundation laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering all specified and directed.

M & L for Cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundations, filling, mass concrete and all as specified and directed.

M&L for TMT bars 6 to 8 mm dia cut to length, bent to shape required, including cranking, bending and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Taking down carefullycopper/aluminium point wiring (light, fan, socket or power) complete with fittings such as switches, sockets ,ceiling rose, light fittings etc, and making good the disturbed surface of walls and floors etc all as specified and directed.

Taking down carefully copper/aluminium sub-main wiring any type and making good the disturbed surface of walls and floors etc all as specified and directed.

Taking down carefully MCB DBs/sheet metal earth plug socket any size and any type including MCBs any type and making good the disturbed surface of walls and floors to existing specification etc all as specified and directed.

M & L for Point wiring with PVC insulated FRLS PVC unsheathed electric cable 1100V grade single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area for phase/neutral in & including non metallic rigid PVC conduit ISI marked medium grade not less than 20mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good disturbed surface of wall (cutting except on ceiling for fan point only, on ceiling instead of pvc conduit surface casing caping will be used) & 1.5 sqmm green FRLS PVC insulated unsheathed copper conductor as a earth wire connected to earth dolly by providing lugs including galvanised boxes 1.5mm thick with bakelite sheet 2mm thick for mounting switches, sockets, fan regulators etc for the following :-

(a) One light/fan/bell point controlled by one switch

(b)One 5amps socket out let point controlled by one switch on same board with other switches.

(c) One 5amps socket out let point on independent board controlled by one switch.

All as per item no 126.00 here in before but using pvc insulated unsheathed 2.5 sqmm cross sectional area cable for phase /neutral & for earth 2.5 Sq mm green PVC insulated cable for 15 amps socket point on independent board controlled by one switch.

Supply and fix in repairs Modular Switch flush type 10 Amps single pole, one way complete all as specified. Make:- Legrand Mylinc Series, Crabtree Athena Series, Anchor ROMA PLUS

Supply and fix in repairs Modular Socket outlet, multi purpose, 5 Pin combined 6 Amps flush type complete all as specified. Make:- Legrand Mylinc Series, Crabtree Athena Series, Anchor ROMA PLUS

Supply and fix in repairs Modular Bell push flush type, 10 Amps complete all as specified. Make:- Legrand Mylinc Series, Crabtree Athena Series, Anchor ROMA PLUS

Supply and fix in repairs Modular Socket outlet, multi purpose, 2/3 pin combined 16 Amps universal socket complete all as specified. Make:- Legrand Mylinc Series, Crabtree Athena Series, Anchor ROMA PLUS

Supply and fix in repairs Modular Switch 16 Amps single pole, one way complete all as specified. Make:- Legrand Mylinc Series, Crabtree Athena Series, Anchor ROMA PLUS

Supply & fix in repairs modular fan regulator step type, 2 module type complete. Make:- Legrand Mylinc Series, Crabtree Athena Series, Anchor ROMA PLUS

Supply and fixing in repairs white finished single mounting modular plates sutable for modular accessories of following sizes:(Make:- Legrand Mylinc Series, Crabtree Athena Series, Anchor ROMA PLUS).

(a) Sutable for 1/2 modules

(b) Sutable for 3 modules

(c) Sutable for 6 modules

(d) Sutable for 8 horizontal modules

Supply and fix in repairs sheet metal boxes concealed in wall suitable for housing modular accessories of following sizes all as specified and directed. :-(Make:- Legrand Mylinc Series, Crabtree Athena Series, Anchor ROMA PLUS).

(a) Sutable for 1 or 2 modules 50mm.

(b) Sutable for 3 modules 50mm.

(c) Sutable for 4 modules 50mm.

(d) Sutable for 8 modules 50mm.

Supply and fix in repairs Bell, ding dong type, AC 230 Volts, single pole complete all as specified and directed. Make :- Anchor , Havells , Legrand

S&F in repairs ceiling rose surface bakelite three terminal complete all as specified and directed.

S&F in repairs lamp holder insulated body with back plate for batten fittings all as specified and directed.

Supply and fix LED bulb of 7 watt, Of base B-22, suitable for fixing in lamp holder all as specified and directed. MAKE:Wipro /philips/ havells)

Supply and fix in repairs LED batten for retrofit type LED tube upto 1x22 Watt, without LED tube rod,pre-wired for LED tube, complete with all accessories duly connection with three core flexible copper cable and duly fixed on two Nos PVC square boxes complete all as specified and directed.

Supply and fix in repairs retrofit LED tube light T-8 type, 1x20/21 Watt, 6000K with extruded aluminium heat sink for efficient heat dissipation complete all as specified and directed.

Supply and fix in repairs LED tube light fittings 1x9/10 Watt, 6000K complete fitting with all accessories duly connection with three core flexible copper cable duly fixed on two nos of pvc square boxes complete all as specified and directed.

Supply and fix in repairs Wall light fittings suitable for & including LED bulb of 7 watt, including connection with all necessary fixing accessories complete all as specified and directed by Engr-in-Charge. Make :- Havells Cat No. LHDL07150099 or equivalent in equivalent in Bajaj, GE.

S&F for energy saving recess/surface mounted luminaire 36 W,Slim type(Edge-lite type) incl LED Driver, high efficiency, Ultra modern designed LED Luminaire which provides soft- glare free light and symmetrical illumination, suitable for Armstrong/Grid ceiling of 600X600 mm incl required suitable size of ceiling cut out, incl Provn of three core cable of copper conductor of size 1.5 sqmm, making necessary electric connetion from ceiling rose to fitting terminal , fixing the fitting on ceiling including cutting, grooving with proper finish and making good, disturbed surface with all fixing arrangement complete all as directed (Make-Havells Cat No.ENDURASLIMPROPLUS2X2PLR28/36WLED840MOD or equivalent in Crompton/GE.

M&L for Sub main wiring in repairs with two runs of single core PVC insulated unsheathed cable 1100 volts grade, 6 Sqmm size with multistranded copper conductor, drawn in and including concealed non metallic rigid PVC conduit of not less than 25 mm dia including one run of PVC insulated unsheathed 6.0 sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly in concealed wiring system by cutting of wall and making good disturbed surface of wall all as specified and directed. Note : 2 runs of 6sqmm cable, one run of earth wire (6sqmm) and one run of PVC conduit shall be measured as one unit length (RM) to purpose of payment.

M&L for Sub main wiring in repairs with two runs of single core PVC insulated unsheathed cable 1100 volts grade, 4 Sqmm size with multistranded copper conductor, drawn in and including concealed non metallic rigid PVC conduit of not less than 25 mm dia including one run of PVC insulated unsheathed 4 sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly in concealed wiring system by cutting of wall and making good disturbed surface of wall all as specified and directed. Note : 2 runs of 6sqmm cable, one run of earth wire (6sqmm) and one run of PVC conduit shall be measured as one unit length (RM) to purpose of payment.

Supply and fix in repairs double door SPN DBs eight ways of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din rail complete all as specified and directed.

S & F in repairs MCB SPN 6 to 32 amps 10 KA, 'C' series including connection with suitable size aluminium / copper lugs complete all as specified and directed.

S&F in repairs MCB SP 240 volts 6 to 32 Amps, 10 KA breaking capacity, 'B' series including connection with suitable size aluminium / copper lugs complete all as specified and directed.

S&F( in building peripheri) energy efficient, compact street lighting 25 Watt LED with deep drawn Alluminium housing complete with conncting wire and provision of GI bracket, clamp, nuts, bolts grounded in wall incl all fixing arrangement. Make - Crompton Cat No. LSTS-25-CDL or equivelent in Wipro/Havells

Supply & fix metallic exhaust fan AC single phase 230/ 240 V of size 380mm sweep with louver including cutting the existing wall for making a hole of appropriate size for fixing the exhaust fan and making good the disturbed surface complete duly connection with copper wire etc completeincl taking down of ceiling fan in safe custody and deposit to E/M Store all as specified and directed by Engr-in-Charge. . Make: Havells Model Turbo Force SP or equivalent in Crompton/Almonard

Supply and Fix electric ceiling fan capacitor type 1200mm sweep, 230 Volts single phase, ISI marked, 5 star rating, white in colour, complete with all accessories like down rod, clamps etc incl taking down of ceiling fan in safe custody and deposit to E/M Store all as specified and directed by Engr-in-Charge.

M & L for earthing complete with galvanised steel earth p;ate 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanised Iron Wire of size 4 sq mm as earthing lead by means of bolts, nuts, cheek nut and washers of galvanised iron or steel besides at all joints as shown in Electrical Plate No-3 of SSR Part I and including excavation and earth work GI pipe 20 mm dia light grade protection pipe and including chorcoal filling common salt ,PCC (1:3:6) type CI using 20 mm graded stone aggregate chamber and MS angle iron frame 40x40x6mm and RCC cover 40mm thick (1:2:4) type B-1 using 20mm dia graded stone aggregate reinforced with 6mm dia round bars @ 75 mm c/c both ways with MS handle 12mm dia, CI funnel and wire mesh 20mm dia GI pipe medium grade for watering and connected to earth Test point (Including testing) complete all as specified and directed.

GEETANJALI CONSTRUCTIONS

Robin Associates

M/s Shree Ganesh Traders

M/S GARG CONSTRUCTION

Chitragupta Construction