SMART PERIODICAL SERVICES WORK FOR ESD, CHORDLINE AND UNIT LINE AREA AT MIL STN KANKINARA UNDER GE (N) KOLKATA

Amount

Taking down cement plaster of any description on brick walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

Material and labour for 20mm thick plaster in CM (1:4) in two layers, i.e 10mm thick in each layer, top layer mixed with water proofing liquid admixture as per manufacturers instruction on brick or concrete surfaces of wall and finished the surface fair and even complete all as specified and as directed. Note :- WPC shall be measured and paid separately.

Material and labour for applying two coats of 100% Premium acrylic emulsion paint on newly plastered surfaces of wall by spray machine after cleaning the surface by Vacuum based sanding machine, washing down etc having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed. Note : Guarantee of smart periodical shall be 5 (five) years from the date of completion of the work.

Material and labour for complete removal of existing treatment from old decorated plastered surfaces of wall by Vacuum based sanding machine, washing down, removal of nail etc & filling cracks/hole with putty, and applying two coats of 100% Premium acrylic emulsion paint by spray machine on plastered surface, having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces complete all as specified and as directed. Note : Guarantee of smart periodical shall be 5(five) years from the date of completion of the work.

S & F in repair UPVC (SWR) pipes 110mm bore, type A, single socketed in any length with rubber ring joints fixed to walls with and including PVC brackets complete all as specified and as directed.

S & F in repair UPVC (SWR) bends/shoe, 110mm bore any radius complete all as specified and as directed.

Material and labour for rendering 15mm thick in CM (1:6) on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and as directed.

Material and labour for preparation of newly plastered surfaces of wall by vaccum based sanding machine, applying wall care putty min thickness 1 mm, (Multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two coats of oil emulsion distemper white or coloured by Auto Roller over a coat of primer complete all as specified and directed and as per manufacturers instructions.

Material and labour for complete removal of existing treatment from old plastered surfaces of wall by Vaccum based sanding machine, removal of nails etc & filling cracks/ hole with putty, applying wall care putty upto 1mm thick as required ( Multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two coats of emulsion distemper white or coloured by Auto Roller over a coat of primer complete all as specified and directed and as per manufacturers instructions.

Material and labour for complete removal of existing treatment from old plastered surfaces of wall by Vaccum based sanding machine, removal of nails etc & filling cracks/ hole with putty, and applying two coats of emulsion distemper white or coloured by Auto Roller over a coat of primer complete all as specified and directed and as per manufacturers instructions.

Supply only water proofing liquid admixture complete all as specified and as directed. (Make :CONPLAST X421IC of Fosroc /SIKA No 1 of SIKA/equivalent brand of PIDILITE/STP)

Material and labour for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed.

Material and labour for providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and as directed.

Material and labour for applying one coat of synthetic enamel paint to old painted wooden surface exceeding 10cm width or girth including preparation of old painted wooden surfaces complete all as specified and directed.

Material and labour for applying one coat of synthetic enamel paint on old painted steel surface of any description over 10cm width or girth including preparation of old painted steel surfaces complete all as specified and directed.

Taking down/ dismantling loose/ damage concrete including plaster of any description and in any position from RCC structures like chajja, fins, roof ceiling,louvers, parapet, column, beam, and lintel by hammering with wooden mallets carefully chipping off the old concrete surface with necessary scaffolding including cutting of rusted reinforcement if so required and disposal of old debris to outside the premises complete all as specified and as directed.

Demolition of reinforced concrete as in roofs, floors (other than ground floors), beams, staircases, landing, and similar suspended work (reinforcement cut as required to facilitate demolition) with necessary scaffolding and protection as required complete all as specified and as directed.

M & L for cleaning the existing surface of concrete and reinforcements as obtained after execution of item No. 16 & 17 here in before by wire brush including scrapping & cleaning with emery paper and washing down with water as required and applying “Solvent free epoxy concrete bonding agent” as per manufacturer’s instructions on old concrete surfaces for bonding with new concrete complete all as specified and as directed.

M & L for applying two coats of “Epoxy zinc rich primer” as protective coat to exposed surface of old and new reinforcement over 10 mm dia as per manufacturer's instructions complete all as specified and as directed.

All as per item No.19 above but for reinforcement upto 10mm dia complete all as specified and directed.

Material and labour for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending lapping etc as required and welding with existing bar complete all as specified and as directed.

Material and labour for TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending, lapping etc as required and welding with existing bar complete all as specified and as directed.

Material and labour for TMT bars upto 10mm dia as in stirrups cut to lenth bent to shape required including cranking ,bending etc and lapping ,welding as directed to the existing one complete all as specified and as directed.

Material and labour for providing reinforced cement concrete (1:1½: 3) type A1 (using 20mm graded stone aggregate) as in chajja, facia, railing and parapet complete all as specified and as directed.

Material and labour for providing reinforced cement concrete (1:1½: 3) type A0 (using 12.5mm graded stone aggregate) mixed with integral water proofing liquid admixture as per manufactures instructions as in columns, pillars, piers, posts and struts complete all as specified and as directed. (Note : WPC shall deemed to be included in the unit rate)

All as per item No. 25 above but in beams, lintel, cantilevers complete all as specifed and directed.

All as per item No. 25 above but in suspended slab, landing, balcony and similar items complete all as specifed and directed.

All as per item No. 25 above but in chajja, facia, railing and parapet complete all as specifed and directed.

M&L for use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished concrete surfaces complete all as specified and as directed.

M&L for use and waste of formwork to sides and soffits of beams, lintels, floors etc. for rough finished concrete surfaces complete all as specified and as directed.

M&L for use and waste of formwork to parapet, RCC wardrobe and similar items for rough finished concrete surfaces complete all as specified and as directed.

M&L for use and waste of formwork to sides and soffits of chajja, troughs etc for rough finished concrete surfaces complete all as specified and as directed

Material and labour for 5 mm thick plastering in CM (1:3) on concrete surfaces as in sides of column, lintel, beam, chajja, facia, railing, RCC wardrobe etc including finish the surface even and fair without using extra cement complete all as specified and as directed.

All as per item No.33 above but in ceiling complete all as specifed and directed.

ALOKE ENGINEERING AND COMPANY (BID ID -3310157)

S M ENTERPRISE (BID ID -3310027)

DAS ENTERPRISE (BID ID -3310543)

SUROJIT GHORUI (BID ID -3310511)

J.S. Construction (BID ID -3309626)

S D ENTERPRISE (BID ID -3310910)

Friends Trading Co (BID ID -3307958)