Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.2 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹44.2 L+₹7.4 L (20.2%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹47.4 L+₹10.6 L (28.7%)Rejected-Finance 19 SAINIK COLONY BAIRAGARH BHOPAL MP 462 030 | BHOPAL | MADHYA PRADESH | 462030 | L3 | Rejected-Finance OTHER THAN LOWEST | |
| 4 | L4₹48.3 L+₹11.5 L (31.1%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST | |
| 5 | L5₹48.5 L+₹11.7 L (31.8%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
27 Jul 2022, 6:00 pmClosed
GE BHOPAL
GE BHOPAL BAIRAGARH BHOPAL
REPAIR MAINT OF EXTERNAL WATER SUPPLY CI GI PIPE LINE CONNECTED FITTINGS FIXTURES FOR OTM ACCN AND CERTAIN REPAIR IMPROVEMENT OF EM INSTALLATIONS AT BAIRAGARH UNDER GE BHOPAL
2022_MES_532278_1
8902/E8
Open Tender
Pipe Laying Works
Item Rate
183 days
BHOPAL
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GE BHOPAL
₹90,000
Yes
3 Sept 2022
20 Jun 2022
29 Jul 2022
20 Jun 2022
27 Jul 2022
4 Jul 2022
Amount
Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, pier holes, for laying/taking out CI/GI pip lines, valves, etc and getting out in any type of soil complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.
Removing excavated materials (soil) to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
Taking up / down existing, cast iron pipe lines / water mains of any description / grade and in position including fittings, accessories and fixtures etc existing in between pipe line, by taking out and opening any type of joints (Tyton /Gasket / Lead joints) complete all as specified and directed by the Engineer-in-Charge for following bore of pipes:- NOTE : (i) While taking out of water main existing lead shall be recovered by burning out joints carefully from the existing joints of the water mains which shall be sold to the contractor under schedule of credit (ii) Old CI pipe / fittings retrieved in serviceable condition from taking down shall be reused in the work as approved by the Engineer-in-Charge.
80mm bore
100 mm bore
150 mm bore
200 mm bore
250mm bore
450mm bore
Laying only in trenches, spigot and socketed cast iron pipes of any description / grade and in any position, as obtained from taking up or down, after making necessary addition / alterations and properly cleaning the pipes internally and externally, drawing out foregin material/rust, etc for the following sizes complete all as specified and directed :- NOTE:- (i) Earth work, Joints and CI specials/ fittings of the pipes shall be measured and paid for separately under appropriate item of BOQ/Schedule `A'. (ii) Old CI pipe / fittings retrieved in serviceable condition from taking down shall be reused in the work after proper cleaning(externally & internally) .
80mm bore
100 mm bore
150 mm bore
200 mm bore
250mm bore
450mm bore
S&F cast iron pipes with spigot and socket ends, centrifugally cast, class LA, in any length, laid in trenches for the following sizes complete all as specified and directed :- [MAKE:-ELECTROSTEEL / KAPILANSH / NECO / KEJRIWAL as approved by GE] NOTE :- Earth work, Joints and CI specials/ fittings of the pipes shall be measured and paid for separately under appropriate item of BOQ/Schedule `A'.
80mm bore
100 mm bore
150 mm bore
200 mm bore
250mm bore
M&L for push on flexible rubber gasket (Tyton) joint suitable for ductile iron pressure pipes for water mains and pipe fittings with spigot and socketed ends for the following sizes complete all as specified and directed :-
80mm bore
100 mm bore
150 mm bore
200 mm bore
250 mm bore
450 mm bore
Cutting cast iron pipes in position for insertion of new tees, branches, etc for the following sizes complete all as specified and directed :-
80mm bore
100 mm bore
150 mm bore
200 mm bore
250mm bore
450mm bore
S&F cast iron bends (any type, radius and angle), tapers any type (straight, bend, increasing, decreasing or double socket etc), tee pieces, single branch, ‘Y’ junction, double branch, cross (all sockets or socket & spigot or flanged) collars, caps and plugs for spigot socketed pipes upto 150mm bore complete all as specified and directed. [MAKE:-ELECTROSTEEL / KAPILANSH / NECO / KEJRIWAL as approved by GE]
S&F cast iron bends (any type, radius and angle), tapers any type (straight, bend, increasing, decreasing or double socket etc), tee pieces, single branch, ‘Y’ junction, double branch, cross (all sockets or socket & spigot or flanged) collars, caps and plugs for spigot socketed pipes 200mm to 450mm bore complete all as specified and directed. [MAKE:-ELECTROSTEEL / KAPILANSH / NECO / KEJRIWAL as approved by GE]
M&L for Run lead joint for cast iron spigot and socket pipes and fitting for the following bores complete all as specified and directed :-
80mm bore
100 mm bore
150 mm bore
200 mm bore
250mm bore
450mm bore
M&L for caulking of run lead joint for spigot and socketed pipes and fittings using lead wool including necessary excavation, returning & refilling for the following bores complete all as specified and directed :- NOTE:- The quoted rates for above items is inclusive of lead wool, necessary earth work in excavation and dewatering of trenches, etc.
80mm bore
100 mm bore
150 mm bore
200 mm bore
250mm bore
450mm bore
Taking out sluice valve top cover, spindle and broken / unsv check nut (gutka); removal to workshop & refixing of sluice valve parts after servicing / maintenance /grinding / cleaning / threading / greasing work to sluice valve parts, including replacment of gland packing, rubber sheet, nuts, bolts, spindle, check nut and washer, etc as required; and reassembling the sluice valve and testing complete all as specified and directed of following size:- NOTE :- Replacement of the spindle shall be measured and paid for separately.
80mm bore
100 mm bore
150 mm bore
200 mm bore
250mm bore
450mm bore
Taking out old unserviceable Sluice valve and Supply, installation, fixing, jointing and testing, of approved quality cast iron flanged sluice valve of class 1.6 PN, long body, ISI marked (IS-14846) with stainless steel spindle and hand wheel including nuts, bolts, rubber gasket, etc complete of following size:- [MAKE:- KIRLOSKAR / LEADER / L&T as approved by GE]
80mm bore
100 mm bore
150 mm bore
200 mm bore
250mm bore
450mm bore
S&F Rolled mild steel sections conforming to Fe 410-W (Gde E-250) quality -A as in valve pit chamber cover made of MS equal angle and MS sheet 3 mm thick including welding, cutting, hinges, locking arrangments, etc including taking out old rusted covers complete all as specified and directed.
M&L for Brick work with sub class ‘B’ bricks (Modular), straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 including demolition of old brickwork where ever required complete all as specified and directed.
M&L for Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cills, seismic and other similar bands, plinth courses, copings, bed plates, bond stones, etc including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work including demolition of old/loose concrete wherever required complete all as specified and directed.
M&L for rendering 15mm thick in cement mortar 1: 4 on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.
Taking up or down steel tubing and connections from trenches / walls / floors / ceilings, etc including cleaning (tubings only and not connections) for refixing for the following sizes complete all as specified and directed :-
100 mm bore
80 mm bore
50 mm bore
40mm bore
25mm bore
20mm bore
15mm bore
Refixing old steel tubing with and provision of new fittings (connections) in new or old position (walls, ceiling, floors, etc) for the following sizes complete all as specified and directed :-
80 mm bore
50 mm bore
40mm bore
25mm bore
20mm bore
15mm bore
S&F Steel water tubes, medium grade, ISI marked, galvanised with all fittings, fixed to walls and ceiling or laid in floors/trenches for the following sizes complete all as specified and directed :- [MAKE:-TATA / JINDAL / PRAKASH / SWASTIK as approved by GE]
100 mm bore
80mm bore
50 mm bore
40mm bore
25mm bore
20mm bore
15mm bore
S&F 3 layer PP-R (poly propylene random complymer) pipes SDR 7.4 (PN-16) UV stablized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain Brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors for the following sizes including taking down old GI/PPR pipe complete all as specified and directed :-
32 mm outer bore
25 mm outer bore
16 mm outer bore
S&F 3 layer PP-R (poly propylene random complymer) concealed pipes SDR 7.4 (PN-16) UV stablized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain Brass threaded polypropylene random fittings laid in trenches, etc for the following sizes including taking down old GI/PPR pipe complete all as specified and directed :-
90 mm outer bore
63 mm outer bore
50 mm outer bore
Drilling and tapping cast iron water mains (in position) by turning off water for branch connections of the internal dia 15mm GI pipe complete all as specified and directed.
Drilling and tapping cast iron water mains (in position) by turning off water for branch connections of the internal dia 20mm GI pipe complete all as specified and directed.
S&F Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe for the following bores including taking out old unserviceable valve complete all as specified and directed :-
50 mm bore
40mm bore
25mm bore
20mm bore
15mm bore
S&F Rubber gasket joint for cast iron spigot and socket pipes and fitting for the following sizes complete all as specified and directed :-
80mm bore
100 mm bore
150 mm bore
200 mm bore
250mm bore
450mm bore
M&L for joint with rubber or fibre board gasket including necessary bolts, nuts, washers and white lead or mineral oil; for cast iron flanged pipes of following sizes complete all as specified and directed :-
80mm bore
100 mm bore
150 mm bore
200 mm bore
250mm bore
450mm bore
M&L for attending complaint of repair/ rectification of GI pipe/ PP-R pipe line leakage etc by deploying skilled tratesman (plumber and helper) with all necessary GI fittings ie socket, union, elbow, bends etc) required and necessary excavation, earthwork and dewatering required for making leak proof and functional complete all as specified and directed. Note :- (i) The quoted rates shall deemed to include for all excavation, earth work and dewatering and new GI / PP-R fittings of suitable size. (ii) The tradesman shall report to E/M complaint cell Bairagarh daily at 8.30 AM to take complaint from concerned JE E/M. The complaint must be attended on same day in stipulated time period by providing material required and deploying sufficient manpower by he contractor. The complaint slip duly signed by the users shall be returned back to complaint cell with proper feedback in the evening. (iii) New GI / PP-R fitting of suitable size, yarn and safeda/ white lead required shall be supplied by the contractor. The quoted rate shall be deemed to include this provision. (iii) Complaint slip & other stationery required for attending complaint shall be supplied by the contractor with out ant extra cost to the Dept.
15 mm dia pipe
20 mm dia pipe
25 mm dia pipe
40 mm dia pipe
50 mm dia pipe
80 mm dia pipe
S&F in repairs Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore (minimum weight 210 gms) complete all as specified and directed. [MAKE:-PRAYAG / POLYTUFF as approved by GE]
S&F in repairs Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 25 mm bore (minimum weight 455 gms) complete all as specified and directed. [MAKE:-PRAYAG / POLYTUFF as approved by GE]
S&F Rotational moulded (three layered), polyethylene water storage tanks (cylindrical vertical with closed top) of 500 litres capacity, hoisted and fixed in position including connecting up pipes including taking down old tank any type complete all as specified and directed. [MAKE:-SINTEX / POLYWELL / ROTAX/ JS POLYPLAST / POLYCON as approved by GE]
S&F Rotational moulded (three layered), polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 litres capacity, hoisted and fixed in position including connecting up pipes including taking down old tank any type complete all as specified and directed. [MAKE:-SINTEX / POLYWELL / ROTAX/ JS POLYPLAST / POLYCON as approved by GE]
Cleaning and removing all scale and dirt, using bleaching powder, etc from water tanks and from mouth of circulating pipes, etc of capacity not exceeding 500 litres complete all as specified and directed.
Cleaning and removing all scale and dirt, using bleaching powder, etc from water tanks and from mouth of circulating pipes, etc of capacityabove 500 litres upto 1000 ltrs complete all as specified and directed. Note (FOR BOQ Serial Item Nos. 34 & 35):- (i) Any damage to to tank during cleaning process shall be the sole responsibility of the contractor and he will have to get it reapired/replced without any extra cost to the department. (ii) The outlet of tank shall be blocked using cotton waste before cleaning of the tank to avoid blockage of outlet pipes. (iii) All care shall be taken by the contractor to avoid blockage of pipes after cleaning of tank, air lock of pipes, etc if any shall be removed immediately. (iv) Users signature shall be obtained for each tank cleaned.
Disconnecting existing water tanks of capacity upto & including 500 litres, setting aside (or lowering if required) for repairs including making it leak proof using M-Seal or other approved products, replacemnt of barrel nipple, cleaning, etc and hoisting, if required, reconnecting and refixing in position (cleaning, repairing etc to be measured separately) complete all as specified and directed. NOTE: Tanks which can not be repaired shall be sold to contractor under schedule of credit.
Disconnecting existing water tanks of capacity above 500 litres and upto 1000 ltrs, setting aside (or lowering if required) for repairs including making it leak proof using M-Seal or other approved products, replacemnt of barrel nipple, cleaning, etc and hoisting, if required, reconnecting and refixing in position (cleaning, repairing etc to be measured separately) complete all as specified and directed. NOTE: Tanks which can not be repaired shall be sold to contractor under schedule of credit.
Supply, laying and jointing DI pipes 100 mm dia ISI marked, S/S class K 9 of standard length, internal cement mortar coating and external surface with bituminious paint including nut bolt, packing material etc and making the joint leak proof including taking down old DI pipe complete all as specified and directed.
Supply, laying and jointing DI pipes 80 mm dia ISI marked, S/S class K 9 of standard length, internal cement mortar coating and external surface with bituminious paint including nut bolt, packing material etc and making the joint leak proof including taking down old DI pipe complete all as specified and directed.
M&L for replacment of stainless steel splindle with check nut of existing type & size, including opening, grinding , threading , machning of gun metal gate, replacement of nut, bolt and washer including rubber sheet suitable for the following sizes of sluice valves of any description complete all as specified and directed:-
80mm bore
100 mm bore
150 mm bore
200 mm bore
250mm bore
450mm bore
Supply, laying and jointing DI pipes 250 mm dia ISI marked, S/S class K 9 of standard length, internal cement mortar coating and external surface with bituminious paint including nut bolt, packing material etc and making the joint leak proof including taking down old DI pipe complete all as specified and directed.
Supply, laying and jointing DI pipes 200 mm dia ISI marked, S/S class K 9 of standard length, internal cement mortar coating and external surface with bituminious paint including nut bolt, packing material etc and making the joint leak proof including taking down old DI pipe complete all as specified and directed.
Supply, laying and jointing DI pipes 150 mm dia ISI marked, S/S class K 9 of standard length, internal cement mortar coating and external surface with bituminious paint including nut bolt, packing material etc and making the joint leak proof including taking down old DI pipe complete all as specified and directed.
M&L for preparation of surfaces and applying one coat of synthetic enamel paint of white/Red/Blue/Green colour as directed, on sump / wall etc in main filter pump House complete all specified and directed.
M&L for heavy duty flooring tiles, harsh weather & UV Resistance, high abrasion resistance, MOH Hardness >6, thickness 10 mm thick, area of each tile not less than 0.09 sqm, anti slip type, laid in floors, steps, edges, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tile with & including 15mm thick rendering in CM 1:4 including taking down old tiles complete all as specified and directed. [MAKE: SOMANY/ KAJARIA/ORIENT/JOHNSON]
M&L for 18-20 mm thick granite (of any type) work (table rubbed and polished) set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including grinding, moulding and including 15mm thick screed bed in CM 1:4 including taking down old stones complete all as specified and directed.
Supply & filling / laying in layers graded filter media comprising of following including removal of old media from existing filter of capacity 15 lakh gallon complete all as specified and directed:-
Graded coarse sand of size 1.5mm to 1.1 mm size
Fine sand of 34 to 33 micron
Fixing only 15 mm bore GI pipe medium grade and fixed in position including connecting up pipes including taking down old pipe any type and depositing to MES store complete all as specified and directed. [Pipe shall be issued under Schedule ' B' free for fixing"]
Fixing only GI pipe medium grade 20mm and fixed in position including connecting up pipes including taking down old pipe any type and depositing to MES store complete all as specified and directed. [Pipe shall be issued under Schedule ' B' free for fixing"]
Taking out old unserviceable non return valve and Supply, installation, fixing, jointing and testing, of approved quality cast iron non return valve, flange type of 80mm, class 1.6 PN, long body, ISI marked (IS-14846) including nuts, bolts, rubber gasket, etc complete of following size:- [MAKE:- KIRLOSKAR / LEADER / L&T as approved by GE]
Taking out old unserviceable non return valve and Supply, installation, fixing, jointing and testing, of approved quality cast iron non return valve, flange type of 100mm, class 1.6 PN, long body, ISI marked (IS-14846) including nuts, bolts, rubber gasket, etc complete of following size:- [MAKE:- KIRLOSKAR / LEADER / L&T as approved by GE]
Taking out old unserviceable non return valve and Supply, installation, fixing, jointing and testing, of approved quality cast iron non return valve, flange type of 150mm, class 1.6 PN, long body, ISI marked (IS-14846) including nuts, bolts, rubber gasket, etc complete of following size:- [MAKE:- KIRLOSKAR / LEADER / L&T as approved by GE]
Taking out old unserviceable non return valve and Supply, installation, fixing, jointing and testing, of approved quality cast iron non return valve, flange type of 200mm, class 1.6 PN, long body, ISI marked (IS-14846) including nuts, bolts, rubber gasket, etc complete of following size:- [MAKE:- KIRLOSKAR / LEADER / L&T as approved by GE]
Taking out old unserviceable foot valve and Supply, installation, fixing, jointing and testing, of approved quality cast iron foot valve, flange type of 80mm, class 1.6 PN, long body, ISI marked (IS-14846) including nuts, bolts, rubber gasket, etc complete of following size:- [MAKE:- KIRLOSKAR / LEADER / L&T as approved by GE]
Taking out old unserviceable foot valve and Supply, installation, fixing, jointing and testing, of approved quality cast iron foot valve, flange type of 100mm, class 1.6 PN, long body, ISI marked (IS-14846) including nuts, bolts, rubber gasket, etc complete of following size:- [MAKE:- KIRLOSKAR / LEADER / L&T as approved by GE]
Taking out old unserviceable foot valve and Supply, installation, fixing, jointing and testing, of approved quality cast iron foot valve, flange type of 150mm, class 1.6 PN, long body, ISI marked (IS-14846) including nuts, bolts, rubber gasket, etc complete of following size:- [MAKE:- KIRLOSKAR / LEADER / L&T as approved by GE]
Taking out old unserviceable foot valve and Supply, installation, fixing, jointing and testing, of approved quality cast iron foot valve, flange type of 200mm, class 1.6 PN, long body, ISI marked (IS-14846) including nuts, bolts, rubber gasket, etc complete of following size:- [MAKE:- KIRLOSKAR / LEADER / L&T as approved by GE]
Taking out old Mechanical Joint and S& F new Mechanical Joint DI type of flange type K12 of followng size including nut bolt all connecting accessories all specified and directed.
80mm bore
100 mm bore
150 mm bore
200 mm bore
250mm bore
450mm bore
S&F PPR Gate Valve of following size including nut bolt and all connecting accessories, complete all as specified and directed.
20 mm bore
25 mm bore
32 mm bore
40 mm bore
50mm bore
63 mm bore
S&F Air Release Valve as per IS-14845, double chamber, of following size including nut bolt and all connecting accessories, complete all as specified and directed.
80 mm bore
100 mm bore
150 mm bore
200 mm bore
Dismantling Asbestos cement (corrugated, semicorrugted, etc) sheet in roof converings, complete all as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet, 0.5mm thickness, of colour as approved by GE, having tensile strength of 550 Mpa as in roof coverings/cladding to wall, etc, fixed with & including self tapping screws on angle frame complete all as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating GI based profile steel sheet, 0.5mm thickness, of colour as approved by GE, having tensile strength of 550 Mpa as in roof coverings/cladding to wall, etc, fixed with & including self tapping screws on angle frame complete all as specified and directed.
S&F steel work as in tubular (round/square/rectangular shape of pipes as approved by Engr-In-Charge) trusses of semi circle shape including post special shaped washers etc complete incl necessary nut bolts wind ties and gusset plates etc using ERW or induction butt welded tubes conformining to IS 1161-1998 grade St-240 complete all as specified and directed.
Dismantling posts or struts embeded in concrete, brickwork (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground all as directed
Dismantling fencing wire mesh any type, any size, complete all as specified and directed.
Excavating in post holes (or similar holes) in hard/dense soil each not exceeding 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exceeding 50m and making good surface complete all as specified and directed.
M&L for cement concrete 1:2:4 Type B2 (using 40 mm graded stone aggregate) in foundation, filling and mass concrete complete all as specified and directed.
S&F mild steel angle iron as in posts and struts in fencing including cutting top to shape as directed drilling holes, notching for wire etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc conforming to Fe 290 Gde E-165 complete all as specified and directed.
&F Mild steel conforming to Fe-290 Gde E-165 in bands, straps, supports or stays for rain water, including bolts, if required, hook and pintle hinges; handmade sliding bolts; clamps; hold fasts; hooks for hanging fans and similar small articles complete all as specified and directed.
S&F Mild steel screw bolts (machine made) with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exceeding 5 Cm long and dia of shank 11 to 15mm complete all as specified and directed.
M&L Mild steel round bars 10mm dia and over, Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde - E-165)cut tolength, bent to shaperequired, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
S&F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm to 80mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and as directed.
Supply only chain link MS galvanised of 50 mm x 50 mm size mesh and dia as directed by Engr in charge complete all as specified and directed.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and directed.
M&L preparation of new or previously untreated steel surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.
M&L framed work such as grills, gratings, gate including welding etc with ends of bars souldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railing, frame work of water tanks and similar work conforming to Fe-290, Gde E-165 complete all as specified and directed.
Demolition of brick work, built in Cement mortar including all quoins, arches, pillars etc, complete all as specified and directed.
M & L for Brickwork with fly ash bricks, straight or curved on plan exc 6 m mean radius, built in cm 1:4 complete all as specified and directed.
M&L Broken stone or boulder in loose filling, leveling with aggregate of gauge 40 to 80mm in electrical installation incl removal of vegetation complete all as specified and directed.
M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone agg) as in foundation, filling, subbase and mass concrete complete all as specified and directed.
M&L for Factory made, machine pressed, M-35 grade concrete interlocking paver blocks (glossy /reflective type), with grey cement and pigment, any shape and size conforming to IS:15658-2006 (ISI Marked) of 60 mm thickness with & including 50 mm thick sand cushion and joints filled with sand complete all as specified and directed.
M&L for heavy duty flooring tiles, harsh weather & UV Resistance, high abrasion resistance, MOH Hardness >6, thickness 10 mm thick, area of each tile not less than 0.09 sqm, anti slip type, laid in floors, steps, edges, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tile with & including 15mm thick rendering in CM 1:4 complete all as specified and directed.
M&L for PCC type B0 ,1:2:4 (12.5mm graded aggregate) in cills, steps, copings, kneelers, appex stones, bed plates, kerbs, edges of paver blocks etc complete all as specified and directed.
Fixing only 10000 Ltr capacity water tank including all fixing accessories complete all as specified and directed. Note : Water tank shall be issued under Sch "B" free for fixing
Deduct Schedule of credit (calculation will be done off line) Rs. 1,64,975.00
RAJPATI CONSTRUCTION
SUNIL ENTERPRISE
City buildcom builders & devlopers
AJIT ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .