Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
Closing Date
27 Nov 2025, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CPO - PIPELINES
DIGITALLY SIGNED AND ENCRYPTED BIDS UNDER 2 BIDS SYSTEM ARE INVITED FOR
2500023785-HD-09050
5100023785
Open Tender
Two Bid
Unknown (Unspecified Location)
₹0
Exempted
27 Nov 2025
6 Nov 2025
27 Nov 2025
27 Nov 2025
6 Nov 2025 - 12 Nov 2025
13 Nov 2025
| Item No | Item Title | Description | Qty | Unit |
|---|---|---|---|---|
| 1 | Mob/Dmob of Pig Tool | Mob/Dmob of Pig Tool — "METALLIC MATERIALS AND CORROSION - Magnetic Cleaning and Electronic Geometry Pigging - Mobilisation/ Demobilisation of pigging tools, tackles, consumables, accessories and personnel by Contractor at work site including but not limited to magnet pigs, electronic geometry pigs and pig tracking device, temporary launcher and receiver as per Specification and other provision of the bid document including supply of material, equipment, manpower, etc. as required for geometry inspection and magnet cleaning in accordance with the EIL Specification C028-000-06-41-EGP-0002:A) MobilisationB) DemobilisationNOTE: Lumpsum charge is applicable for Mobilization and Demobilization charge only, and not for the entire Magnetic Cleaning and EGP charge." | - | Lump Sum |
| 2 | Magnetic Cleaning | Magnetic Cleaning — "METALLIC MATERIALS AND CORROSION - Magnetic Cleaning and Electronic Geometry Pigging - Magnetic Cleaning:Running of adequate no. of Magnet Pigs for pipeline including pig tracking for each segment, preparation of site report as per Specification and provisions of the bid document." | - | meter |
| 3 | Elec. Geometric Pig | Elec. Geometric Pig — "METALLIC MATERIALS AND CORROSION - Magnetic Cleaning and Electronic Geometry Pigging - Electronic Geometry Pigging:Running of adequate no. of Electronic Geometry Pig (Caliper) including pig tracking for each segment, preparation of site report on pipeline, data analysis at Contractors facility as per Specification and provisions of the bid document." | - | meter |
| 4 | Defect Verification | Defect Verification — "METALLIC MATERIALS AND CORROSION - Magnetic Cleaning and Electronic Geometry Pigging - Defect Verification:Defect verification at a max. of 3 locations for each segment inspected including supply of all tools, tackles, instruments, personnel and their transportation, all earth work, repair of pipeline coating wherever exposed, backfilling, work complete in all respect as per direction of engineer-in-charge.NOTE: Unit EACH signifies each segment of the pipeline." | - | each |
| 5 | MC&EGP Final Report | MC&EGP Final Report — "METALLIC MATERIALS AND CORROSION - Magnetic Cleaning and Electronic Geometry Pigging - Final Report:Preparation of final work report as per agreed format and submission to Client / Client's Consultant in total of 4 copies." | - | Lump Sum |
| 6 | Temp. CP sys. | Temp. CP sys. — CATHODIC PROTECTION - Temporary Cathodic Protection System - Survey, Design, Detail Engineering, Supply, installation, testing and commissioning, Post commissioning surveys, interference mitigation(CDEGS Modelling/Utility Modelling) of the cathodic protection system of the pipeline. All work shall be carried out conforming to the scope of work, design basis, data sheets, specifications, standards, drawings, etc as per the provisions of GCC, SCC and specification no: C028-000-06-45-SOW-0001 Rev.1 | - | Lump Sum |
| 7 | Permanent CP sys. | Permanent CP sys. — CATHODIC PROTECTION - Permanent Cathodic Protection System - Survey, Design, Detail Engineering, Supply, installation, testing and commissioning, Post commissioning surveys, interference mitigation(CDEGS Modelling/Utility Modelling) of the cathodic protection system of the pipeline. All work shall be carried out conforming to the scope of work, design basis, data sheets, specifications, standards, drawings, etc as per the provisions of GCC, SCC and specification no: C028-000-06-45-SOW-0001 Rev.1 | - | Lump Sum |
| 8 | LA.-Anode Bd-SV7 | LA.-Anode Bd-SV7 — CATHODIC PROTECTION - Acquisition of land in the name of the OWNER of size 50m x 5m (maximum) for anode ground bed at the following CP station locations: SV-07 | - | square meter |
| 9 | LA.-Anode Bd-SV8 | LA.-Anode Bd-SV8 — CATHODIC PROTECTION - Acquisition of land in the name of the OWNER of size 50m x 5m (maximum) for anode ground bed at the following CP station locations: SV-08 | - | square meter |
| 10 | LA.-Anode Bd-IPS2 | LA.-Anode Bd-IPS2 — CATHODIC PROTECTION - Acquisition of land in the name of the OWNER of size 50m x 5m (maximum) for anode ground bed at the following CP station locations: IPS-2 | - | square meter |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
2500023785-HD-09050.pdf
TENDER_DOCUMENT • 0.63 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .