Civil work

Dismantling the damaged Mosaic in situ finish in cement mortar in flooring and in wall surface and clearing away with carefully stacking the material useful for reuse for any thickness etc., complete complying with standard specification and as directed by the Departmental officers.

Dismantling , removing and carefully stackin damaged false ceiling etc., complete complying with standard specification and as directed by the departmental officers at site of work.

Dismantling , removing and carefully stackin damaged Aluminium partition, doors & wondows etc., complete complying with standard specification and as directed by the departmental officers at site of work.

Labour engaged for shifting office materials from one location to another, including movement between different floors of the same building or to other buildings within the project premises. The work includes loading, unloading, handling, and proper placement of materials at designated locations. All operations shall be carried out carefully to avoid damage to materials and structures. The work shall be completed as directed by the departmental officers.

Laying of Screed Concrete using Cemet concrete mix 1:2:4 (one cement, two sand and four hard broken stone jelly) using HBGS 6-10mm ISS metal for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.

Paving the floor with best quality Double Charged Vitrified Tiles 800 x 800 x 10mm and variety conforming IS 15622 with water absorbtion less than 0.08% of approved colour and shade laid over cement mortar bed of 20mm thick in cement mortar 1:3 (one cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer in all floors and the top pointed with Water Resistant Tile Epoxy Grout etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Removing the existing MS windows grills carefully without damaging surrounding masonry including marking of cut lines , cuting using electric grinder with suitable metal cutting dises,chisels and hammers detaching the wlded portions, lowering th removed the removed grill safety to the ground, stacking the servicble material etc., complete complying with standard specification and as directed by the departmental officers

Refixing the existing MS grill in its original including cleaning the surface , aligning it properly in the window opening, fixing it securely to the masonery or frame using approved MS holdfasts, screws,anchors,fasternes or welding as required and also plastering using CM 1:5 if any wall damages etc., omplete complying with standard specification and as directed by the departmental officers

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work