Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.4 LAccepted-AOC H NO 400 STREET NO 1 SAIN GHAR PATHANKOT GURDASPUR PUNJAB 145001 | PATHANKOT | PUNJAB | 145001 | L1 | Accepted-AOC Being lowest L1 | |
| 2 | L2₹12.1 L+₹1.4 L (13.0%)Rejected-Finance | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹13.3 L+₹2.6 L (23.8%)Rejected-Finance | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹14.8 L+₹4.1 L (37.8%)Rejected-Finance 1ST FLOOR GURJEET MARKET DHANGU ROAD | L4 | Rejected-Finance Other than lowest |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
18 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) PATHANKOT
GE (AF) PATHANKOT-145001
DAY TO DAY REPAIR/MAINTENANCE WORK OF B/R NATURE IN NO 2 AND 3 AREA AT AIR FORCE STATION PATHANKOT
2023_MES_604412_1
8422/GE/PAF-28/2023-24
Open Tender
Support/Maintenance Service
Item Rate
180 days
GE (AF) PATHANKOT
As per NIT
8 documents required · 8 mandatory
₹500
GE (AF) PATHANKOT
₹40,000
Yes
4 Aug 2023
20 Jun 2023
20 Jul 2023
20 Jun 2023
18 Jul 2023
4 Jul 2023
Amount
Demolition of cement concrete (un-reinforced) in ground floors and pavings n. exc. 15cm thickness (below or above ground level) complete all as specified and directed by Engineer-in-Charge.
Cement concrete (1:3:6) type C-2, 75mm thick , using 40mm graded agg as in plinth protection including finishing the surfaces even and fair complete all as specified and directed by Engineer-in-Charge.
Cement concrete 1:2:4 type B-2, 40mm thick (using 20mm graded agg) as in Floor, finished even and smooth without using extra cement, including demolition of existing cement concrete complete all as specified and directed by Engineer-in-Charge.
Demolition of brick work stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed by Engineer-in-Charge.
Brick work with sub class B bricks straight or curved on plan 6m mean radius built in cm 1:6 complete all as specified and directed by Engineer-in-Charge.
All as per Srl item No 5 above but except bricks complete all as specified and directed by Engineer-in-Charge.
Rendering in cement mortar (1:4) 15mm thick on brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.
Preparation of surfaces and applying three coats of white wash on newly plastered surfaces of wall complete all as specified and directed by Engineer-in-Charge.
M&L for non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm as in floor etc set and jointed in neat cement slurry and pinted in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in cement mortar 1:6 including dismantling existing floor tiling complete all as specified and directed by Engineer-in-Charge.
Renewing tiles in patches as in floor or wall, area n exc 5 sq.m. including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing to match with the shade of existing new or old tiles complete all as specified and directed by Engineer-in-charge.
M&L for glazed ceramic coloured tiles of size 450 x 300 x 7mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement motar 1:4 and dismantling existing wall tiling complete all as specified and directed by Engineer-in-Charge.
M&L for PCC 1:2:4 type B1 (using 20mm graded stone agg) as in patches for filling in depressions in path, floor, hard standing and roads area n.exc 5 sqm each and finishing the top surfaces even and smooth. Rate quoted by contractor indluding taking out old dismantled portion and depositing at a distance exc 500m and n.exc 1Km complete all as specified and directed by Engineer-in-Charge.
Taking down chowkhat or frame with shutter (without taking off shutter from the frame) n exc. 1.50 Sqm each incl taking out hold fast complete all as specified and directed by Engineer-in-Charge.
Taking down chowkhat or frame with shutter (without taking off shutter from the frame) exc. 1.50 Sqm but n exc. 4 Sqm each complete all as specified and directed by Engineer-in-Charge.
Taking down shutters of any description exc 1 sqm and nexc 2 sqm each complete all as specified and directed by Engineer-in-Charge.
Supply and fixing for factory made solid PVC door frame of size 50mmx47mm made out of 5mm plain colour sheet reinforcement with MS square tube complete all as specified and directed by Engineer-in-Charge.
Supply and fixing for factory made PVC flush door of 35 mm thick , solid core construction with particle board core . All screws shall be self tapping chrome plated complete all as specified and directed by Engineer-in-Charge.
Supply and fixing factory made Steel window/ Ventilator 1.25mm thick box type(primer coated)ERW hollow P section of size 60mmx25mm including grill using 10mm sq bar double rebated both gauge and glass shutter comprised gauged glazed Skelton shutter ERW sec 50mmx20mm and 1mm thick with two openable leaf consisting two Nos sash bar of T Section 20mmx3mm complete welded to frame with one vertical mullion of ERW box type T Section of size 60mmx25mm and 1.25mm thick refer TD Drawing No CEAF/AR-480/2015 Sheet No 2(A)/4 dated 30.12.2015 including cutting holes and good dismantled portion in PCC(1:2:4) type B1 and match the disturbed portion with existing surface four Nos for each window including following fitting welded to frame shutter : (a) Hold fast,150mm long of 12mmx3mm made to shape O4 Nos per window (b) handle of Z Sec20mmx25mm, 100mm long-per No leaf (c) MS Tower bolt 150mm long-02No per leaf . (d) Z section 20mmx25mm, 100mm long stopper 1 No per leaf. (e) cleat 55mm long of hollow square 15mmx20mmx63mm welded to hinge. 1 No per leaf (f) MS Pintal hinges of size 75mmx12mm. 2 Nos per leaf, (g) Stainless steel wire cloth, 0.25 mm to 0.36mm nominal dia of wire & average width of aperture 1.40mm to 2mm & fixed with alluminium wire staples (h) Glass pane 3mm thick fixed with MS pin and oil putty including painting to match. (j) Including two coats of synthetic enamel paint complete. NOTE: During Fixing of window, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.
M&L for repair to Aluminium door/windows of any size/any description ,taking off from present position and refixing in the same position after tightening ,easing the section as required, including fitting the rubber packing aluminium snap beading ,re-setting floor/hydraulic spring etc complete all as specified and directed by Engineer-in-Charge.
Taking down shutters of any description of size exc 1 Sqm and not exc 2 Sqm and easing, adjusting, refixing builder hardware, replacing bottom rail as required including renewal of unserviceable screw, etc and refixing in same opening as required at site complete all as specified and directed by Engineer-in-Charge.
Supply and fixing pressed steel frame made out of MS sheet 1.25mm thick of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-1 back of chowkhats, with two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed by Engineer-in-Charge. NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.
Supply and fixing pressed steel frame made out of MS sheet 1.25mm thick of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-1 back of chowkats,with two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed by Engineer-in-Charge. NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.
Supply and fixing 35mm thick (factory made) plain framed panelled door shutters of 2nd class hard wood two panel with lock rail and panel of 9mm thick BWP commercial ply ,the size of rail and style as per IS : 1003 Part-I, Kiln seasoned and chemically pressure treatedfactory made shutters wood is to be incorporated all as complete all as specified and directed by Engineer-in-Charge.
Supply and fixing 30mm thick Glazed and ske- leton shutters, open rebated and prepared to receive glass, gauze, etc. with sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of me-mbers of shutters as specified in SSR Part I, Section 8, cla-use 8.20 (a).
Supply and fixing stainless steel wire cloth 0.25 mm to 0.36mm nominal dia of wire and average width of aperture 1.40mm to 2 mm and fixed with stainless steel wire staples complete all as specified and directed by Engineer-in-Charge.
Preperation of new or previously untreated surfaces of wood or based materials of any description not otherwise described over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-Charge.
Supply and fixing factory made solid PVC door frame of size 60mmx30mm made out of solid PVC foam with homogeneous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100x8 mm sheet metal CSK screw, taking down with existing one complete all as specified and directed by Engineer-in-Charge. Note:- During fixing of chowkhat, surface shall be make good in plumb with existing finishes like cement plaster, simillar wall tile, floor tile etc as per site requirement.
Supply and fixing 18 mm thick UV board duly edge banded with 0.8 mm thick PVC taping fitting of shutters shall be fixed with and including continous piano steel hinges and modular handles, design and colour as approved by GE suitable for cup board, kitchen cabinet etcincluding taking down with existing one complete all as specified and directed by Engineer-in-Charge.
Supply and fixing aluminium anodised hasp and staples125 mm size including bolt to hinge plate and fixed with screws complete all as specified and directed by Engineer-in-Charge.
Supply and fixing Stainless steel butt hinges medium weight 100mm complete all as specified and directed by Engineer-in-Charge. NOTE :- All screws shall be self tapping chrome plated and length of screw not less 38 mm
Supply and fixing floor door stopper of aluminium alloy body and tongue 140 mm anodised with hard drawn steel spring fixed in door complete all as specified and directed by Engineer-in-Charge.
Supply and fixing 3mm thick sheet glass ordinary quality and size in any type of frames and glazing with oil putt (or beading) in square nexc. 0.5 Sqm each incl hacking out old broken glass from wooden/steel frames complete all as specified and directed by Engineer-in-Charge.
Removing existing window glass pans in which oil putty and MS pines are damaged and making good by providing oil putty and MS Pins including cleaning the glass panes and fixing back in position at any floor and at any position, complete all as specified and directed by Engineer-in-Charge.
Supply and fixing aluminium door seal up to 1200mm length best quality complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair aluminium die cast body Door closer hydraulically regulated design No1 universal type suitable for door shutter ISI Marked complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repairs helical door spring 150mm size with roller and roller plates of mild steel incl welding to angle iron plate or chokhets complete all as specified and directed by Engineer-in-Charge.
Supply and fixing drapery curtain rod of metalic 25mm dia covered with PVC coating complete with MS bracket golden colour rings and side caps fixed in position by drilling holes in walls and fixed the brackers with rawl plug and steel screw complete all as specified and directed by Engineer-in-Charge.
Taking up or down 15mm bore steel tubing and connections, incl cleaning for re-fixing or removal to store complete all as specified and directed by Engineer-in-Charge.
Taking up or down 20mm bore steel tubing and connections, incl cleaning for re-fixing or removal to store complete all as specified and directed by Engineer-in-Charge.
M&L cutting chases pinning in brick work for concealing water tubing and making good to facing where required and pointing in cement motar 1:3, cutting n.exc. 10cm girth complete all as specified and directed by Engineer-in-Charge.
Material & labour for GI tubing 15mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floor, complete all as specified and directed by Engineer-in-Charge.
Refixing old steel tubing 15 mm dia and connection in new or old position complete all as specified and directed by Engineer-in-Charge.
Material & labour for GI tubing 20mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floor, complete all as specified and directed by Engineer-in-Charge.
Refixing old steel tubing 20 mm dia and connection in new or old position complete all as specified and directed by Engineer-in-Charge.
Supply & Fixed rotational moulded polyethiene water storage tanks of capacity 500 litres, (cylindrical vertical with closed top) hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,incl ball valve 20mm high pressure of PTMT with epoxy coated aluminium rod and highdensity plastic ball screwed for iron pipe completecomplete including dismantling existing water tank complete all as specified and directed by Engineer-in-Charge.
Supply & Fixed rotational moulded polyethiene water storage tanks of capacity 1000 litres, (cylindrical vertical with closed top) hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer incl ball valve 20mm high pressure of PTMT with epoxy coated aluminium rod and highdensity plastic ball screwed for iron pipe complete including dismantling existing water tank complete all as specified and directed by Engineer-in-Charge.
Supply and fixing PVC lid for poly water storage tanks of capacity 500/1000 litres including PVC hinges and PVC locking both complete all as specified and directed by Engineer-in-Charge.
Cleaning and removing all scale and dirt etc from tanks and mouth of eructing pipe incl disconnecting existing tanks and refixing in position after cleaning for 500 litres capacity of tank complete all as specified and directed by Engineer-in-Charge.
Cleaning and removing all scale and dirt etc from tanks and mouth of eructing pipe incl disconnecting existing tanks and refixing in position after cleaning for 1000 litres capacity of tank complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repairs 15 mm bore float valve of high pressure PTMT with epoxy coated aluminuim rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.
All as per Srl item No 53 above but 20 mm bore complete all as specified and directed by Engineer-in-Charge.
Labour only for opening of air locks in toilets /baths and kitchen water pipe line but excluding fittings complete all as specified and directed by Engineer-in-Charge.
Supply and fixing PVC connection 15mm bore size with two nuts and washers of length 450mm complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair bib taps, fancy type, chromium plated, cast copper alloy ISI marked with crutch or butter fly handle high pressure screwed down screwed for iron pipe of 15mm bore complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repairs bib tap standard of PTMT any colour 15 mm bore minimum weight 90 gram complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair stope valve of PTMT any colour 15 mm bore high pressure screwed for iron pipe and fixed minimum weight 110gms complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair piller tap of PTMT any colour 15 mm bore high pressure screwed for iron pipe and fixed minimum weight 110gms complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repairs CP brass shower rose swivel type of size 150 mm with connecting rod of size 150mm long suitable for 15mm bore pipe complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repairs 15mm bore, Angle valve/ stop valve fancy type chromium plated cast copper alloy ISI marked with crutch or butter fly handle high pressure screwed both ends for iron pipe or for union and fixed including CP nipple where required complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair pillar tap fency type cast copper alloy with capstan heads chromium plated fancy type screwed down high pressure with or without letterd , shanked and fly nuts screwed for iron pipe 15mm dia complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repairs hand shower (health faucet) of cast copper alloy chromium plated with 8mm dia, 1m long flexible tube and wall hook complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repairs Chromium plated Jet suitable for pedestal pattern water closet with butterfly base and PVC connection pipe with CP brass check nut at one and suitable for 15mm bore pipe/fittings complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repairs 32 mm dia bore PVC flexible pipe for wash sink/wash hand basin complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repairs waste coupling, brass,cromium plated for glaze ware sink/basin etc size 40mm complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair vetreous China squatting pan Orissa pattern size 580 x 440mm white with integral foot rest ( excluding flushing cistern and flush pipe), including connection to trap, and to flushing pipe, anty syphonage pipe etc. and including 100 mm dia 'P' or 'S' trap complete incl making good to floor complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repairs Vitreous China wash down water closet pan (pedestel pattern) white,including trap connection to drain (outgoing pipe) and to flushing pipe, antisyphonage pipe, PVC jet for Pedestal pattern pan including 450/600mm long PVC connection and plastic water closet seat of white in colour,back closed pattern with flat bottom,and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair 10 ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float ovel handle incl brackets and PVC flushing pipe of polyethylene of low or high density or PVC 32mm dia complete all as specified and directed by Engineer-in-Charge.
Repair to existing pvc flushing cistern by replacing float valve complete all as specified and directed by Engineer-in-Charge.
Repair to existing pvc flushing cistern by replacing syphon and washer complete all as specified and directed by Engineer-in-Charge.
Repair to existing pvc flushing cistern by replacing cistern handle complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repairs plastic sheet cover closed pattern with flat bottom and cover including chromium plated hinge device complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repairs Vitreous chinaware wash hand basin white, flat back of size 550x400 mm excluding tap but including brackets fixing to wall and two Nos 10mm dia 100mm long nut and bolt over brackets and CP waste coupling complete all as specified and directed by Engineer-in-Charge.
Taking down of exisitg wash hand basin/sink baracket and supply and fix new GI brackets and refixing the WHB/sink in exisiting including making good with black/white cement as reqd at site complete all as specified and directed by Engineer-in-Charge.
Supply and fixing Stainless steel sink in repair 1mm thick overall size 495mm X420mm bowl size 410x330x160mm with plush washers and wastes, cp waste coupling including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in replacement stainless steel plate rack of size 900mm X 950mm complete all as specified and directed by Engineer-in-Charge.
Supply & fixing in repair PVC bends (any radius) diminishing pieces or lepers 75mm bore complete all as specified and directed by Engineer-in-Charge.
All same as per Srl item No 80 above but 100mm bore complete all as specified and directed by Engineer-in-Charge.
Supplying and fixing in repair PVC floor trap 75mm outlet dia with CP grating including joints to waste pipe fixed in cement concrete type B-1 1:2:4 using 20mm graded crushed stone aggregate complete all as specified and directed by Engineer-in-Charge
Supply and fixing 100mm bore sand cast iron soil waste and vent pipe ISI marked in any length with or without ears with lead joints laid in floor/walls complete all as specified and directed by Engineer-in-Charge
All as Per Srl item No 83 above but 75mm bore complete all as specified and directed by Engineer-in-Charge
Supply and fixing in repair 110mm bore PVC(SWR) pipes single socketed, in any length with rubber ring joints, laid in trenchs or in floor complete all as specified and directed by Engineer-in-Charge
Supply and fixing in repair 75mm bore PVC(SWR) pipes single socketed, in any length with rubber ring joints, laid in trenchs or in floor complete all as specified and directed by Engineer-in-Charge
Supply and fixing in repair 100mm bore PVC(SWR) bends complete all as specified and directed by Engineer-in-Charge
Supply and fixing in repair 75mm bore PVC(SWR) bends complete all as specified and directed by Engineer-in-Charge
Dismantling wall, ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs any thickness, including cover fillets complete all as specified and directed by Engineer-in-Charge
Position suspended false ceiling system using T-grid suspended ceiling grid system. The size of grid shall be 600 x 600mm with GI frame work main runner 38 x 24mm x 3600 mm, cross tee 25 x 24 x 600mm / 25 x 24 x 1200mm and wall angle 24 x 24 x 2540mm ( thickness of the material of 0.30 mm), using 9mm thick ceiling panel laminated with PVC film on front face and foil back available in due drop texture as per IS-2095, part-I-1996, fixed in the grid of T-grid suspended ceiling grid system duly suspended by 4mm dig GI bar hanger from the purlins of the roof with butter fly clips all as specified and directed by Engr-in-charge.
Preparation of old plastered or unplastered surfaces of wall including cornices, pillasters by brooming down with steel wire brushing scrapping down smoke dust, moulds, moss and efflorescent salts and removing oily and greasy spots etc applying one coat of white wash on old decorated surfaces of walls complete all as specified and directed by Engineer-in-Charge
All as per srl item No 91 above but on ceiling surfaces complete all as specified and directed by Engineer-in-Charge
Preparation of old plastered or unplastered surfaces of wall including cornices, pillasters by brooming down with steel wire brushing scrapping down smoke dust, moulds, moss and efflorescent salts and removing oily and greasy spots etc applying one coats of oil bound distemper on old surfaces of walls complete all as specified and directed by Engineer-in-Charge
Complete removal of existing treatment on surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot , moulds moss and efflorosent salts , trading oil and greasy spots and applying two coats of oil bound distemper, over a coat of primer including one coat of wall care birla putty 2 to 3 mm thick on old plastered surfaces of walls including preparatory to distempering complete all as specified and directed by Engineer-in-Charge
Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed by Engineer-in-Charge
Rendering 15mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:6) finished even and fair without using extra cement, complete all as specified and directed by Engineer-in-Charge
Preparation of newly plastered surfaces and applying two coats of oil bound distemper, over a coat of primer including one coat of wall care birla putty 2 to 3 mm thick plastered on surfaces of walls complete all as specified and directed by Engineer-in-Charge
Rendering 10mm thick cement plaster on ceilings surfaces in cement mortar (1:3) as in ceiling finished even and fair without using extra cement including taking down existing plaster with three coats of white wash on new undecorated surfaces of ceiling complete all as specified and directed by Engineer-in-Charge
Preparation of old painted wooden surfaces of any description and in any situation over 10 cm width or grith and applying one coat of synathetic enamel paint complete all as specified and directed by Engineer-in-Charge
Preparation of old painted steel surfaces of any description and in any situation over 10 cm width or grith and applying one coat of synathetic enamel paint complete all as specified and directed by Engineer-in-Charge
Supply and fixing in repair capstain head/leaver knob suitable for CP fancy type bib taps any type of mixture, concealed cock, angle cock, pillar cock to match with existing shape and style complete all as specified and directed by Engineer-in-Charge
Material and labour for re-fixing of CP grating of floor trap of any size and type, applying white cement in gaps of wash basin, sink, grating, urinals and the like not otherwise specified joints and making good the surface complete all as specified and directed by Engineer-in-Charge
INDERJIT SINGH
M/S SOHAL CONSTRUCTION CO
Vijay Kumar Contractor and Engineers
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .