REPAIRS/ REPLACEMENT SUCH AS FLOORING, JOINERY, PLASTERING, PLUMBING, SANITARY FITTINGS AND ROOF TREATMENT IN MES INSTALLATIONS UNDER GE CHENNAI

Amount

M&L for brick work straight or curved on plan exceeding 6 metre mean radius using old size fly ash bricks built in cement mortar (1:6) all as specified and directed.

M&L for brickwork with old size fly ash bricks straight or curved on plan to any radius in half brick thick walls in cement mortar (1:4) complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking of shutter from the frame) of any description alongwith fittings n. exc. 1.5 Sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking of shutter from the frame) of any description alongwith fittings exc. 1.5 Sqm n. exc. 4 Sqm each complete all as specified and directed.

Taking down shutters of any description n. exc. 1 Sqm each including fittings complete all as specified and directed.

Taking down shutters of any description n. exc. 1 Sqm each and resecuring in the same opening after cutting, easening etc. with new iron mongry complete as specified and directed.

Taking down shutters of any description exc. 1 Sqm but n. exc. 2 Sqm each including all fittings complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm but n. exc. 2 Sqm each and resecuring in the same opening after cutting, easening etc with new iron mongry complete all as specified and directed.

S&F 2nd class hardwood plain solid straight chowkats and frames wrought, framed, rebated on solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm MS square tube of 19 gauge mitred cut at two corners and joined by inserting two No. 150mm long brackets of 15mm x 15mm MS square tube inside the 19mm x 19mm square tube fixed to wall by drilling and providing 100mm long MS screws with PVC fasteners complete all as specified and directed.

S&F factory made solid PVC moulded door shutter with wood free EPS 28 to 30mm thick with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on back face, supplying and fixing in frame at site complete all as specified and directed.

S&F 2nd class hardwood plain framed panelled shutters 35mm thick, (any No of panels) with panels of timber flat on both sides (feather edged) or 12mm veneered particle board commercial veneering on both faces, the size of rail and stile as per IS:1003 (Part-I), kiln seasoned & chemically treated and fitted to chowkats complete all as specified and directed.

S&F 2nd class hardwood glazed and skeleton door shutters 30mm thick divided into squares open rebated and prepared to receive glass, gauge etc. edges of framing plain, chamfered, rounded fitted with cut and mitered beads for securing glass etc, size of members as specified in SSR Pt 1 section 8 clause 8.20 (a) supplied and fitted to chowkats with plain, chamfered or rounded mitered and rebated sash bars any numbers, complete all as specified and directed.

S&F 2nd class hardwood glazed and skeleton window/ ventilator shutters 30mm thick divided into squares open rebated and prepared to receive glass, gauge etc. edges of framing plain, chamfered, rounded fitted with cut and mitered beads for securing glass etc, size of members as specified in SSR Pt 1 section 8 clause 8.20 (b) supplied and fitted to chowkats with plain, chamfered or rounded mitered and rebated sash bars any numbers, complete all as specified and directed.

S&F aluminium anodised barrel tower bolt of extruded section 100mm long all as specified and directed.

S&F aluminium anodised barrel tower bolt of extruded section 150mm long all as specified and directed.

S&F in repairs aluminium anodised barrel tower bolt of extruded section 100mm long all as specified and directed.

S&F in repairs aluminium anodised barrel tower bolt of extruded section 150mm long all as specified and directed.

S&F aluminium alloy anodised sliding door bolts 250mm long with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.

S&F mild steel butt hinge, medium weight cold rolled 75mm size all as specified and directed.

S&F mild steel butt hinge, medium weight cold rolled 100mm size all as specified and directed.

S&F in repair mild steel butt hinge, medium weight cold rolled 75mm size all as specified and directed.

S&F in repair mild steel butt hinge, medium weight cold rolled 100mm size all as specified and directed.

S&F continuous piano hinge mild steel bright finish or elactro-galvanized width of flap (when open) 30mm complete all as specified and directed.

S&F extruded aluminium alloy handle cast type anodised 100mm size all as specified and directed.

S&F extruded aluminium alloy handle cast type anodised 125mm size all as specified and directed.

S&F in repair extruded aluminium alloy handle cast type anodised 100mm size all as specified and directed.

S&F in repair extruded aluminium alloy handle cast type anodised 125mm size all as specified and directed.

S&F aluminium alloy wire mesh 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed to wood/ steel frames with aluminium wire staples complete all as specified and directed.

All as per item No. 29.00 above but fixed in repairs.

M&L for MS work of angle iron, flat iron of any size for fencing posts and struts including cutting tops to shape as directed drilling holes, notching for wire etc flat iron fillet for securing wire mesh etc. including all necessary drilling, bolting or riveting etc. and similar work.etc and similar work conforming to Fe-290 Grade E-165 (MS pipe) complete all as specified and directed.

M&L MS work in bands, straps, supports of stays, sunshade brackets, hook and pintle hinges, clamps, hold fasts, guard bars, grills, bolts and similar items conforming to FE-290, Gde E 165, complete all as specified and directed.

S&F Pre-painted galvalume aluminium zink coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength 550Mpa as in roof covering/ chajja, fixed with self tapping screws as per manufacturer’s instruction including taking down existing sheeting complete all as specified and directed.

S&F mild steel plain black sheet 1.00mm thick in wall cladding, steel gates and similar works, cut to size, hole punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints including bending or turning up etc. fixed in repairs complete all as specified and directed.

M&L APP modified prefabricated five layer water proofing membrane matt finish, 3mm thick and weighing not less than 3.6 kg/sqm reinforced with non woven polyester matt black finished over one coat of bitumen primer @ 0.40 Litre/ Sqm over and including 10mm thick rendering in cement mortar (1:4) mixed with and including liquid water proofing compound as per manufacturer's instructions and torch application of membrane using gas burner with 100mm overlap as per manufacturer's instructions with top most layer of surface finished with one coat of solar reflective aluminium paint @ 0.10 Litre/ Sqm complete all as specified and directed. Note: (i) The work shall be executed through Manufacturer's applicator approved by GE. (ii) The quoted rate is deemed to include the cost of digital photograph and plaster plate as per PS.

M&L for 18/ 19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed to timber frame work with screws fixed in repairs complete all as specified and directed.

M&L 75mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.

M&L 75mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in path finished fair and even complete all as specified and directed.

M&L for chequered cement concrete tiles 25cm x 25cm x 25mm thick set, jointed and pointed in neat cement slurry as in floors with grey cement and no pigment laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

M&L sand filling under floors or in foundation including watering, well ramming & consolidating in layers not exceeding 25cm thick complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness M-35 grade with grey cement and no pigments laid as per manufacturer's instructions complete all as specified and directed.

Demolition of floor hearth or wall tiling including cement mortar bedding (but not backing) and removing the debris outside MD land and rubbish of the premises complete all as specified and directed.

M&L non skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc. 0.06 Sqm but n. exc. 0.11 Sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7mm to 8mm thick (Square/ rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

M&L coloured glazed ceramic tiles 300mm x 200mm x 7 to 8mm thick or of size matching with floor tiles as in skirting etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match laid over and including 10mm thick rendering in cement mortar (1:3) complete all as specified and directed.

M&L machine cut Kota stone slab 20-25mm thick as in flooring laid over and including 15mm thick screed bed in cement mortar (1:6), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L machine cut Kota stone slab 20-25mm thick as in riser of steps, skirting, dado & pillars etc. laid over and including 15mm thick backing coat in cement mortar (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed.

Taking down cement plaster on brick work or stone walls etc including racking out of joint, hacking for key, scrubbing down with water etc. and removing the debris outside MD land complete all as specified and directed.

M&L rendering 15mm thick in cement mortar (1:6) on fair faces of brick/ concrete surface finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 5mm thick in cement mortar (1:3) as on ceiling finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 15mm thick in two coats i.e. 1st coat 10mm thick in cement mortar (1:6) and 5mm thick finishing coat in cement mortar (1:4) mixed with and including PIDI PROOF LW compound @ 200ml per bag and finishing the surface even and smooth without using extra cement complete all as specified and directed. Note: Quoted rate shall deemed to be inclusive of cost of water proofing compound (PIDI PROOF LW).

M&L preparation of newly plastered or previously untreated surface of walls and applying three coats of white wash complete all as specified and directed.

M&L preparation of newly plastered or previously untreated surface of ceiling and applying three coats of white wash complete all as specified and directed.

M&L preparation of newly plastered or previously untreated surface of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L for preparation of old decorated plastered surfaces of walls including brooming down or by steel wire brushing, scrapping down smoke soot, moss and efflorescent salts and treating oil & greasy spots and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old decorated plastered surfaces of ceiling including brooming down or by steel wire brushing, scrapping down smoke soot, moss and efflorescent salts and treating oil & greasy spots and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old decorated plastered surfaces of walls including brooming down or by steel wire brushing, scrapping down smoke soot, moss and efflorescent salts and treating oil & greasy spots and applying one coat of Oil Bound Distemper complete all as specified and directed.

M&L for preparation of old decorated plastered surfaces of walls/ chajja including brooming down or by steel wire brushing, scrapping down smoke soot, moss and efflorescent salts and treating oil & greasy spots and applying one coat of cement based paint complete all as specified and directed.

M&L for writing letters in figures with synthetic enamel paint (Block, Roman, Italic & Indian) n. exc. 30cm height all as specified and directed.

M&L for complete removal of existing treatment with electric operated blade, washing with water and bleaching powder solution on external surface of walls and applying two coats of Weather Proof Exterior Acrylic Emulsion paint (Apex of Asian or equivalent of other specified makes) over one coat of exterior primer over and including coat of wall care putty complete all as specified and directed.

S&F sheet glass 4mm thick plain ordinary quality and glazing with oil putty wooden beads as directed in squares n. exc. 0.50 Sqm in each pane complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds all as specified and directed.

M&L preparation of new wooden or wood based surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L preparation of new steel surfaces of any description not otherwise described over 10cm girth or width and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L preparing surfaces of wood and wood based materials, steel and iron works new or old treating ends of posts backs of chowkats etc. with tar or coal tar black paint aura tarred exc. 0.1 Sqm but n. exc. 0.5 Sqm each complete all as specified and directed.

M&L for preparing surfaces of wood and wood based materials, steel and iron works new or old treating small articles such as hold fast etc with tar or coal tar black paint aura tarred n. exc. 0.1 Sqm each complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint on steel surfaces of any description over 10cm width or girth including preparation of old painted surfaces complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint on wooden surfaces of any description over 10cm width or girth including preparation of old painted surfaces complete all as specified and directed.

S&F galvanised steel water tubing 15mm bore medium grade including provision of all pipe fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc. fixed to walls, concealed in walls/ ceilings or laid in floors etc, including taking up or down the existing GI tubing complete all as specified and directed.

All as per item No. 69.00 above but 20mm bore.

All as per item No. 69.00 above but 25mm bore.

S&F 500 ltr capacity three layered rotational moulded polyethelene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including dismantling existing OHT complete all as specified and directed.

S&F 1000 ltr capacity three layered rotational moulded polyethelene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including dismantling existing OHT complete all as specified and directed.

S&F gun metal, globe or gate valve confirming to IS 778-1984 with iron wheel head, screwed both ends for 20mm bore iron pipe and fixed in repairs complete all as specified and directed.

S&F gun metal, globe or gate valve confirming to IS 778-1984 with iron wheel head, screwed both ends for 25mm bore iron pipe and fixed in repairs complete all as specified and directed.

S&F ball valve PTMT with epoxy coated aluminium rod for 20mm bore pipe, weight not less than 210gms, high pressure with polyethylene high density float and complete screwed for iron pipe including taking down old one complete all as specified and directed.

S&F 15mm dia bib taps brass chromium plated, fancy type, long body with flange with crutch or butterfly handle screwed down, screwed for iron pipes or for brass ferrule and fixed in repairs complete all as specified and directed.

S&F 15mm dia fancy type pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes fixed in repairs complete all as specified and directed.

S&F in repair PTMT bib tap standard any colour suitable for 15mm bore pipe high pressure screwed for iron pipe and fixed (minimum weight 90gms) complete all as specified and directed.

S&F in repairs 15mm dia PTMT stop valves any colour high pressure screwed for iron pipe or for union (Minimum weight 90g) complete all as specified and directed.

S&F in repairs 15mm dia PTMT angle valves any colour high pressure screwed for iron pipe or for union (Minimum weight 90g) complete all as specified and directed.

S&F 15mm dia brass stop valves chromium plated screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed in repairs complete all as specified and directed.

S&F cover for rotational moulded polythelene water storage tank of capacity 250 litre to 2000 litre provided with hinge device and locking arrangement and fixed in position complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall etc. including demolition and breaking up existing pipe complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floor/ trenches including demolition and breaking up existing pipe complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall etc. including demolition and breaking up existing pipe complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floor/ trenches including demolition and breaking up existing pipe complete all as specified and directed.

S&F PVC (SWR) bend any radius with access door suitable for 110mm dia pipes complete all as specified and directed.

S&F PVC (SWR) bend any radius with access door suitable for 75mm dia pipes complete all as specified and directed.

S&F PVC (SWR) branch piece single (single 'Y') equal or unequal 75mm bore with access door complete all as specified and directed.

S&F in repairs PVC (SWR) vent cowl suitable for 110mm bore vent pipe complete all as specified and directed.

S&F PVC (SWR) junction single (single 'T') equal or unequal 110mm bore with access door complete all as specified and directed.

S&F PVC (SWR) junction single (single 'T') equal or unequal 75mm bore with access door complete all as specified and directed.

M&L for PVC (SWR) multi floor trap 75mm dia plain with grating including jointing with solvent cement fixed in repairs complete all as specified and directed.

S&F vitreous china wash hand basin, white, flat back of size 550mm x 400mm including CI brackets and 32mm waste coupling and waste pipe etc., fixed in repairs complete all as specified and directed.

S&F vitreous china wash down water closet squatting pan Orissa pattern of size 580 x 440mm with integral foot rest (white or light coloured) including making necessary connection to soil pipes and flushing cistern fixed in repairs complete all as specified and directed.

S&F 15mm PVC connection 450mm long with PTMT nuts of superior quality all as specified and directed.

S&F PVC low level flushing cistern 10 ltr with complete accessories such as PVC flush pipe, over flow pipe etc. fixed in repairs complete all as specified and directed.

S&F in repair 600mm x 450mm bevelled edged looking mirror 6mm thick with aluminium frame work fitted with 6mm thick commercial ply or AC sheet backing to mirror complete all as specified and directed.

S&F 32/ 40mm dia 750mm long PVC flexible waste pipe for sink/ wash hand basin all as specified and directed.

S&F in repairs PTMT waste coupling (half or full threaded) 32mm/ 40mm bore suitable for wash basin, kitchen sink and urinals (minimum weight 32mm- 45gms/ 40mm- 60 gms) all as specified and directed.

S&F in repairs 60cm long PTMT towel rail fixed with and including chromium plated brass screws and plastic cleats (minimum weight 190g) complete all as specified and directed.

Cutting down vegetation growths like plants/ trees of girth n. exc. 15cm from roof tops/ parapet walls, external walls of buildings, chajjas, wall junctions including removal of roots and taking out carefully possible quantity of concrete in roofs embedded in walls/ slab surfaces and applying TUFALO chemical (herbal medicine) to arrest further growth and making good the disturbed surfaces with PCC (1:2:4) type B-1 or in cement mortar (1:2) upto 10 metre height complete all as specified and directed. Note :- The unit rate quoted shall be deemed to include the cost of scaffolding/ staging etc. as necessary to execute the work.

Demolition of brick masonry built in cement mortar including all quoins/ arches/ pillars etc. but excluding ashlars facings, dressed stone work, precast concrete articles and disposing off the rubbish debris to distance exc. 1.50 KM and n. exc. 3.00 KM complete all as specified and directed.

Demolition of PCC in ground floor and paving n. exc. 15cm thick including removal of debries outside MD land complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise specifically provided for complete all as specified and directed.

high tech engineers and co

M/s.Jayam Constructions

SEKARR AGENCIES