CERTAIN REPAIRS REPLACEMENT TO BR ITEMS INTERNAL EXTERNAL ELECTRIFICATION COOLING APPLIANCES AND EXTERNAL WATER SUPPLY FOR THE BLDGS AT KODIYAKKARAI UNDER AFS THANJAVUR

Amount

S&F in repairs bib taps cast copper alloy with chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm bore all as specified and as directed..

S&F in repair stop valves 15mm bore concealed cast copper alloy fancy type chromium plated screwed down high pressure with crutch or butter fly handle and fixed, all as specified and as directed.

S & F in repair pillar tap cast copper alloy 15mm bore with capstan head, chromium plated, screwed down high pressure, with or with out lettered "Hot" or "Cold" with long screw shank and fly nuts, screwed for iron pipes all as specified and as directed.

S&F in repairs 10ltr capacity PVC valve less syphonic action type flushing cistern low level white with inlet valve float and handle, bracket fixed all as specified and as directed.

S&F in repair PVC connections 45cm long fitted with brass nuts with washer on both ends fixed complete for 15mm bore pipe.

S&F in repairs plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminum hinging devise, seat and cover for pedestal pan all as specified and as directed..

S&F in repair 19 / 20mm dia Aluminium anodised pipe for curtain rod all as specified and directed.

S&F in repair aluminium anodised brackets all as specified and as directed.

M&L for Preparing surfaces, plastered or unplasterd old decorated wall surfaces including cornices plasters etc and applying one coat of white wash on wall complete all as specified and as directed.

M&L for Preparing surfaces, plastered or unplasterd old decorated ceiling surfaces including cornices plasters etc and applying one coat of white wash on ceiling complete all as specified and as directed.

M&L preparation of old decorated wall surfaces and applying one coat of distemper oil emulsion on walls complete all as specified and as directed.

M&L preparation of old decorated surfaces of walls and applying one coat of cement based paint on wall all as specified and as directed.

M&L for preparation of old painted wooden surfaces over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L preparation of old painted steel surfaces over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed.

Taking down 20mm bore steel water tubing and connections, including cleaning for re-fixing or removal to store from site all as specified and as directed.

S&F Galvanised steel water tubing 20mm dia medium grade and connection in new or old position (Walls, ceiling, floors, etc.)all as specified and as directed.

S&F in repair PVC health faucet 1.5m long and hook all as specified and as directed.

Supply and fix in repair floor door spring (Double spring) hydraulic regulated made upto minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other part made of mild steel heavy duty all as specified and as directed.

S&F in repairs brass CP Towel Rail 20mm dia, D type, 60cm long between flanges etc.,all as specified and as directed.

S&F in repair Angle cock chromimum plated all as specified and directed.

Taking drawn carefully old aluminium / copper point wiring for one light, socket or power etc incl all fitings such as switches sockets, holders, light fittings, fan requlators etc and making good the disturbed surface of wall ceiling complete all as specified and as directed.

M&L for point wiring with 1.5sqmm (nominal cross-sectional area) PVC insulated unsheathed single core copper cable working voltage 1100volts grade conforming to IS-694 with multistranded copper conductor in including PVC rigid non metallic 25mm PVC casing caping (double Lock) including PVC polycarbonate/PVC/rectangular block/box of suitable size fixed by means of brass machjne screw and cap washer including size 1.5sqmm (nominal cross sectional area PVC insulated unsheathed single core multistranded copper conductr cable as earth continuity conductor connected to main switches / DBs or common earth dolly complete all as specified and directed. Make of cable-Havells/Finolex/plaza,

All as per Srl item No 23 mentioned here-in-before but for one ceiling fan / exhaust fan point, controlled by one way switches 5 / 6 Amps.

All as per Srl item No 23 here-in-before but for one 3 pin socket outlet point, 5 / 6 Amps on the independent board

All as per Srl item No 23 here-in-before but for one 3 pin socket outlet point, 5 / 6 Amps on the same board with other switches.

All as per Srl item No 23 here-in-before but for point wiring with 4sqmm (nominal cross sectional area) single core stranded copper conductor for one switch socket out let point, 15 / 16amps on the independent board.

S&F Lamp holder, insulated body, with back plate suitable for batten fittings/pendent fittings white/ivory finish complete all as specified and as directed.

S&F Switch piano flush button, white/ivory finish, 5/6 amps, single pole, one way complete all as specified and as directed.

S&F Socket outlet 2 in 1, 3 pin, 5 and 15amp flush type complete all as specified and as directed.

S&F Socket outlet 2 in 1, 3 pin, 5A complete all as specified and as directed.

S&F Sheet metal enclosure for 4 way Distribution Boards (DB’s), double door, single pole & neutral with 200amps rated bus bar, IP-20 protection suitable for fixing MCB's / lsolators after and including taking down old DB with MCB complete all as specified and directed. Make : Legrand cat No 607710 or equivalent & approved model of SIEMENS/ MERLIN GERIN

S&F Sheet metal enclosure for 8 way Distribution Boards (DB’s), double door, single pole and neutral with 200amps rated bus bar, IP-20 protection suitable for fixing MCB's / lsolators after and including taking down old DB with MCB complete all as specified and as directed. Make : Legrand cat No 607711 or equivalent & approved model of SIEMENS/ MERLIN GERIN

S&F Sheet metal enclosure for 4 way Distribution Boards (DB’s), double door, Tripple pole & neutral with 200amps rated bus bar, IP-20 protection suitable for fixing MCB's / lsolator’s after and including taking down old DB with MCB complete all as specified and directed. Make : Legrand cat No 607715 or equivalent & approved model of SIEMENS/ MERLIN GERIN

S&F Ceiling rose, surface Bakelite, large type, 220 / 240volts, three terminals, white/ivory finish complete all as specified and directed.

Material and labour for earthing complete with galvanised steel plate electrodes of size 600x600x6mm thick burried directly in ground with earth pit not less than 2.25meter deep below normal ground level with top edge of plate not less than 1.5meter below normal ground level connected to galvanised 4.0mm dia earth lead by means of nuts bolts check nuts GI washers earth wire protected by galvanised iron or steel all as shown in electrical Plate No-3 connected to earthing test point all as specified or indicated including testing on completion all as specified and as directed.

Supply and fixing fan regulator electronic type suitable for 300watt (heavy duty) type 250V, AC for ceiling fan all as specified and as directed.

M&L for sub main wiring with 2 run of 6sqmm (nominal cross-sectional area) PVC insulated unsheathed single core flame retardant cable (FR) of working voltage 1100volts grade with stranded copper conductor including one run of 6sqmm (nominal cross sectional area) PVC insulated unsheathed flame retardant cable (FR) with stranded copper conductor as continuous earth wire connected to main switches DBs or in common earth dolly drawn with and including 20mm dia PVC rigid non- metallic conduit after and including taking down / dismantling old sub main wiring including old conduit / casing capping / wooden batten etc of any description complete all as specified and as directed. Make:- Plaza / Havells / Polycab / FINOLEX

Supply and fixing of E-Lite LED Pride Plus Neo Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack.wall mounted LED Batten 20watt and integrated electronic driver complete all as specified and directed. Make as per Havells Cat Part.No: LHEXACP7IN1W020 20 W LED 6500 K or Equivalent in Philips & CG.

Supply and fixing of E-Lite LED Pride Plus Neo Decorative ultra slim square profile 10watt LED surface mounted fitting and integrated electronic driver complete all as specified and directed.Make as per Havells Cat Part.No: LHEXACP7IN1W009 W LED 6500 K or Equivalent in Philips & CG.

Supply and fixing in replacement of LED security Lights 30watt with best in class design & robust heat sink along with class leading IP, IK & Surge protections for long lasting performance.and integrated electronic driver complete all as specified and irected. Make as per Havells Cat Part.No: LHEXAYP7PN6K030, 30 W LED 6500 Kor Equivalent in Philips & CG.

S&F MCB, Single pole & neutral, 6 to 32amps, 240volts, ‘C’ curve, 10KA complete all as specified and as directed. Make : Legrand Cat No 408609 to 408617 or equivalent & approved model of SIEMENS/ MERLIN GERIN

S&F MCB, Single pole & neutral, 40 to 63amps, 240volts, ‘C’ curve, 10KA complete all as specified and as directed Make : Legrand Cat No 408618 to 408620 or equivalent & approved model of SIEMENS/ MERLIN GERIN

S&F MCB, Single pole, 6 to 32amps, 240volts, ‘C’ curve, 10KA complete all as specified and as directed Make : Legrand Cat No 408587 to 408595 or equivalent & approved model of SIEMENS/ MERLIN GERIN

Dimantling and taking out ceiling fan 230 volts 1200 / 1400mm sweep any make cutting the old burnt winding rewinding with new super enamelled copper wire as existing guage including insertion of insulating papers threading and insulating with insulating warnish, lathe work, replacement of 2.25 / 3.15 MFD capacitor, replacement of MS split clamp 02Nos with rubber reel and painting after completion of rewinding process complete all as specified and as directed.

Supply and fixin in replacement of ball bearing of size 6200 to 6204 suitable for ceiling fan 1200 / 1400mm sweep all as specified and as directed. Make :- NBC/SKF

Dimantling and taking out exhaust fan 230volts 200 to 450mm sweep any make cutting the old burnt winding rewinding with new super enamelled copper wire as existing guage including insertion of insulating papers threading and insulating with insulating warnish, lathe work, replacement of capacitor, replacement of gun metal bushes and painting after completion of rewinding process complete all as specified and as directed.

Supply and fix in replacement fan capacitor 2.5MFD complete all as specified and as directed. Make: TESLA/ Tibcon/ Ebcos

Supply, Laying, jointing & testing in trenches or passing through pipe, 1100volts grade, XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured LT electric power under ground cables, heavy duty with aluminium conductor of cross sectional area 16sqmm 4core with all fixing & connecting accessories including taking down old unserviceable cable. Make: Havell’s / Polycab / Finolex)

All as per Srl Item No 49 here-in-before but 25sqmm 3.5core (Make: Polycab/Havell’s/Plaza).

Supply and fixing/laying in replacement 40mm bore, steel tubings galvanised, light grade with all fittings fixing along the electric laing in trench or pole / wall for protection of cable complete all as specified and as directed. Make : TATA/JINDAL/Prakash Surya

Plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in foundations of poles/Panel boardall as specified and as directed.

Plain cement concrete 1:3:6 type C1 using 20mm graded stone aggregate as in coping, bed block etc including necessary form work all as specified and as directed.

Taking out hanging doors from LT panels welding the doors in position by using new hinges and scrapping old surface and cleaning smoothly and applied two coats of synthetic enamel paint over a coat of red oxide primer and freshening of damaged insulation of cables including excavation and earth work for removing of loop of cables etc complete all as specified and as directed.

Excavation in trenches in soft/loose soil not exc. 1.5metre wide and not exc. 1.5metre in depth and getting out for taking up / laying under ground electric cable or for pole etc complete all as specified and as directed. Note :- Mechanical excavation is not allowed in this Stn only manual excavation allowed.

Returning and filling in two parts (i) using riddled soil obtain from excavated soil upto depth of 30 cm (8 cm below cable and remaining above cable) for cushioning of cable and (ii) refilling the trench of remaining depth with normal excavated soil all as specified and directed. Note:- Excavated soil shall be riddled by using sieve to separate composite partricles etc as per IS 1255 1983 and refilling in trenches as in cable cushioning.

Removing surplus soils to a distance not exceeding 50m and depositing where directed at a level not exc. 1.5m above the starting point all complete as specified and as directed.

Supply and laying Bricks, sub class 'B' old size bricks, laid flat dry with width of the bricks laid to the axis of the cable all complete as specified and as directed.

M&L for sub main wiring with 2run of 1.5sqmm (nominal cross-sectional area) PVC insulated unsheathed single core flame retardant cable (FR) of working voltage 1100volts grade with stranded copper conductor including one run of 1.5sqmm (nominal cross sectional area) PVC insulated unsheathed flame retardant cable (FR) with stranded copper conductor as continuous earth wire connected to main switches DBs or in common earth dolly drawn with and including 20mm dia PVC rigid non- metallic conduit including flexible PVC pipe at starting and finishing point after and including taking down / dismantling old sub main wiring including old conduit etc of any description complete all as specified and as directed. NOTE : (i) Two run of submain wiring cable alongwith one run of earth wire and one run of PVC rigid non metallic conduit shall be measured as one length. (Make:- Plaza / Havells / Polycab / FINOLEX)

Supply and errect steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 (9.0 metres long) and street light bracket of 32mm dia GI pipe length minimum1.2meter with clamp and nut bolts including one primer coat and two coats of aluminium paint over a coat all as specified and directed. Note : Necessary excavation and earth work, PCC foundation, coping etc. shall be measured and paid separately vide relevant items of this schedule.

Supply and fix green line smart 50watt LED street light luminaire with aesthetically designed die cast aluminium housing, power factor of the electronic driver, poly carbonate cover, impact resistant fixture for driver and LEDs, IK 05 impact resistance specifications, IP66 ingress protection is perfect for secondary roadways and pathways complete all as directed. Make Havells Cat Part.No: LHEXAYP7PN6K050, 50 W LED 6500 Kor Equivalent in Philips & CG.

Supply & fix PVC synthetic ( Thermoplastic polystyrene) street light junction boxes of suitable size to accommodate and including 63A 3 ph connector block and MCB SP 5amps with provn of incoming/ outgoing cable entry with 2 sets of suitable size of clamps/bolt & nuts and fixed to poles. Make:Hensel/Syntex/ or quivalents)

S&F MCB, Single pole, 6 to 32amps, 240volts, ‘C’ curve, 10KA complete all as specified and as directed Make : Legrand Cat No 408587 to 408595 or equivalent & approved model of SIEMENS/ MERLIN GERIN

S&F in replacement single pole and neutral enclosure with a two pin and earth plug and socket complete with single pole MCB 20amps capacity complete all as specified and directed.

Supply and fix in replacement metal clad plug two pin and earth complete all as specified and directed.

M&L for sub main wiring with 2run of 4sqmm (nominal cross-sectional area) PVC insulated unsheathed single core flame retardant low smoke cable (FRLS) of working voltage 1100volts grade with stranded copper conductor including one run of 4sqmm (nominal cross sectional area) PVC insulated unsheathed flame retardant cable (FR) with stranded copper conductor as continuous earth wire connected to main switches DBs or in common earth dolly drawn with and including 20mm dia PVC rigid non- metallic conduit after and including taking down / dismantling old sub main wiring including old conduit / casing capping / wooden batten etc of any description complete all as specified and as directed. Make:- Plaza / Havells / Polycab / FINOLEX

Taking down and supply and fix new compressor including pumping out oil, cleaning the refrigeration system with Co2 and charging refrigerant gas (M-22/F-22) providing NRV for further topping up of gas and re-fixing in the position including complete testing and commissioning suitable for 1.5 - 2.0 TR capacity split type Air conditoner. Make : SHRIRAM / KIRLOSKAR/ CARRIER /VOLTAS

Supply and fix in replacement PCB (Printed circuit board) suitable for 1.5 / 2.0TR split type type Air conditioners all as specified and directed.

Material and labour for Leak test with Co2 / Nitrogen gas arrest leakage with brazing of copper pipe and charging refrigerant gas R- 410 / R-22 for AC capacity 1.5 / 2TR Split type Air conditioner all as specified and as directed.

Material and labour for Leak test with Co2 / Nitrogen gas arrest leakage with brazing of copper pipe and charging refrigerant gas R-12 / R-134 for following cooling appliances all as specified and as directed. .

Refrigerator

Water Cooler

Deep freezer

Supply and fix Rigid PVC flexible hose of 15mm dia 2.5m length with all acessories fixed on wall / ceiling / roof etc with suitable GI saddles and screws for connect with split type AC / water cooler as drain pipe complite all as per specified and directed.

Supply and replace with new fan leaf unit suitable for Airconditioner of capacity 1.5 / 2TR all as per specified and directed.

Supply and replace with new remote control unit suitable for Airconditioner all as per specified and directed.

Supply and replace with new condenser coil unit made of copper suitable for split Airconditioner 1.5TR all as per specified and directed.

Supply and fix in repair Starting capacitors for following cooling appliances. Make : keltron/siemens/carrier/tibcon/sarda.

Split type Air Conditioner

Refrigerator

Deep Freezer

Water Cooler

Supply and fix in repair Running capacitors for following cooling appliances Make : Keltron/Siemens/Sarrier/Tibcon/Sarda.

Split type Air Conditioner

Refrigerator

Deep Freezer

Water Cooler

Supply and fix in repair Thermostatic switch for following cooling appliances Make: Ranutrol/Siemens/Carrier/Tibcon/Sarda.

Split type Air Conditioner

Refrigerator

Deep Freezer

Water Cooler

Supply and fix in repair Fan Motor for following cooling appliances. Make: Ranutrol/Siemens/Carrier/Tibcon/Sarda.

Split type Air Conditioner (Outdoor)

Deep Freezer

Water Cooler

Supply and fix in repair indoor unit blower Fan Motor for 1.5 / 2TR Split type Air conditioner.

Supply and fix in replacement suction valve 1.5 / 2TR capacity.

Supply and fix in replacement discharge valve 1.5 / 2TR capacity.

Supply and fix in replacement flare nut of size 5 / 8inch.

Supply and fix in replacement flare nut of size 1 / 2inch.

Supply and fix in replacement flare nut of size 1 / 4 inch.

Supply and fix in replacement flare nut of size 3 / 8inch.

Supply and fix in replacement mounting stad for split AC 1.5 / 2TR capacity.

Supply and fix in replacement PCB (Printed circuit board) suitable for Indoor 1.5 / 2.0TR Inverter split type Air conditioners all as specified and directed.

Supply and fix in replacement PCB (Printed circuit board) suitable for Outdoor 1.5 / 2.0TR Inverter split type Air conditioners all as specified and directed.

Supply and fixing in replacement voltage stabilizer 4KVA range 170 to 260V, output voltage 230volts AC supply 50 HZ having low and high voltage protection, intelligent time delay system, wall mounting type including mounting accessories time delay 180 seconds +/- 20 seconds as initial time delay complete all as per Volina or equivalent in AE / V - Guard complete all as specified and as directed.

Removing the window / split type AC upto 1.5 / 2TR capacity of any make from any location for carrying out servicing complete as and when ordered and installing back at original location, testing and commissioning complete all as specified and as directed. Note :-The rate of following deemed to be included in quoted rate :- a) Cleaning the body, evaporator and condenser with detergent, combing the pins and flushing with air blower b) Checking electrical connection, cleaning, Greasing, oiling, fan/blower motor, cleaning of air filter with blower c) Wrapping suction and discharge pipe with foam insulation and white roll ,changing drainage pipe when necessary d) The unit rate quoted by the tenderer inclusive for Removing, servicing, installation, commissioning and testing of all equipment’s, materials & labour, tools and plants, and back in on final position complete

S & F PVC insulated multi stranded copper conductor 3core 2.5sqmm, including connecting up and taking down existing unserviceable cable of any description and size complete all as specified and as directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m deep for laying of cables, pipes, foundation for poles etc. and getting out in Soft/ loose soil complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm in soft / loose soil complete all as specified and directed.

Supply and fix galvanised iron pipes medium grade ISI marked with all required necessary fittings complete laid in trenches / wall/ ceiling of 50mm dia all as specified and as directed. Note:- Necessary excavation & earth work, RF&R and removal items shall be measured and paid vide relevant items of this schedule.

All as per Srl item No 95 here in before but 40mm dia.

All as per Srl item No 95 here in before but 25mm dia.

S&F gun metal globe/gate valve with iron wheel head screwed both ends for iron pipe and fixed of size 50mm bore.

All as per Srl item No.98 above but 40mm bore

All as per Srl item No.98 above but 25mm bore

M&L for construction of brick masonry pits for valve chambers of 600 x 600 x 600mm internal size including MS sheet cover fixed on 40 x 40 x 6mm angle iron double side open and 3mm thick MS sheet including hold fasts etc including locking arrangement and applying two coats of synthetic enamel painting over one coat red oxide of primer on steel surfaces , PCC 1 : 4 : 8 bed concrete 100 mm thick, 23cm thick brickwork , 15 mm thick cement plaster in cm (1:4) on brick surfaces, 10 cm thick PCC 1: 2 : 4 coping including formwork including excavation & earthwork in any type of soil (ie average soil) complete all as specified & directed

R K BUILDERS