Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.0 LAccepted-AOC 88 30 RAMASAMY GARDEN ADYAR ARUNACHALAPURAM ADYAR CHENNAI TAMIL NADU 600020 | CHENNAI | TAMIL NADU | 600020 | L1 | Accepted-AOC Being L1 and reasonable | |
| 2 | L2₹4.3 L+₹25,309 (6.33%)Rejected-Finance NO 03 45 NEIKUPPI VILLAGE VENGAPAKKAM POST KALPAKKAM CHENGALPATTU DISTRICT 603 102 | KALPAKKAM | CHENGALPATTU | TAMIL NADU | 603102 | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹4.3 L+₹34,681.50 (8.67%)Rejected-Finance NEIKUPPI VILLAGE VENGAPAKKAM POST KALPAKKAM 603 102 KANCHEEPURAM DIST | KALPAKKAM | KANCHEEPURAM | TAMIL NADU | 603102 | L3 | Rejected-Finance Being L3 |
| Sl No | Description | Qty | Unit | YOGAA MANPOWER AGENCY L1 | S Dilli L2 | S VENKATESAN L3 |
|---|---|---|---|---|---|---|
| 1.00 | Taking down cement plaster on brick walls including racking out joints, hacking for key, scrubbing down with water etc Complete all as specified and directed by Engineer-in-Charge. | 90 | Sqm | 25 ₹2,250 Lowest | 95 ₹8,550 | 75 ₹6,750 |
| 2.00 | M&L for Rendering 15 mm thick in two layers 10 mm thick backing coat in cm 1:6 and 5mm thick finishing coat in cm 1:4 . mixed with water proofing @ 2% by weight of cement finshed surfaces fair and even (Note :- WPC will be measured separately). Complete all as specified and directed by Engineer-in-Charge. | 90 | Sqm | 200 ₹18,000 Lowest | 425 ₹38,250 | 400 ₹36,000 |
| 3.00 | M & L for demolistion of Concrete (reinforced) of any description and in any position not otherwise specifically provided . | 0.75 | Cum | 500 ₹375 Lowest | 1,200 ₹900 | 750 ₹562.5 |
| 4.00 | M & L for laying reinforced cement concrete TypeB0 1:2:4 (12.5mm graded aggregate) in Beams, cantilevers, bressumm-
ers, lintels over 1.5m span Complete all as specified | 0.48 | Cum | 10,000 ₹4,800 | 8,000 ₹3,840 | 7,000 ₹3,360 Lowest |
| 5.00 | M & L for laying reinforced cement concrete TypeB0 1:2:4 (12.5mm graded aggregate) in chajjas Complete all as specified | 0.27 | Cum | 10,000 ₹2,700 | 9,000 ₹2,430 | 7,500 ₹2,025 Lowest |
| 6.00 | M & L for laying the Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. | 16 | Sqm | 500 ₹8,000 | 650 ₹10,400 | 450 ₹7,200 Lowest |
| 7.00 | M & L for laying Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips with the existing bars using the rebar injection chemical. (Note: The rebar injection chemical will be paid separately) | 24 | Kg | 80 ₹1,920 Lowest | 200 ₹4,800 | 100 ₹2,400 |
| 8.00 | M & L for laying Mild steel bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips with the existing bars using the rebar injection chemical. (Note: The rebar injection chemical will be paid separately) | 28 | Kg | 80 ₹2,240 Lowest | 220 ₹6,160 | 110 ₹3,080 |
| 9.00 | M& L for making of 1 no holes size of 8mm dia and depth of 200 mm for chajjas and canopy for fixing of TMT bars by applying the HILti Hilt RE 500 V3 chemical as per Manufacturer specification. | 36 | Each | 539 ₹19,404 | 250 ₹9,000 Lowest | 750 ₹27,000 |
| 10.00 | M &L for complete removal of existing treatment and applying walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) newly plastered or unplastered wall surface including preparation of surface,Complete all as specified and directed by Engineer-in-Charge. | 2,120 | Sqm | 153 ₹3,24,360 | 150 ₹3,18,000 Lowest | 155 ₹3,28,600 |
Tender Value
₹5.2 L
EMD Value
₹10,300
Closing Date
2 Aug 2025, 6:00 pmClosed
AGE (I) NAVY CHENNAI
AGE (I) NAVY CHENNAI MILITARY ENGINEER SERVICE FORT SAINT GEORGE, RAJAJI SALAI, CHENNAI -600009
SPECIAL REPAIRS TO EXTERNAL PAINTING FOR MARRIED AND OTM BUILDINGS AT INS PALLAVA UNDER AGE(I) NAVY CHENNAI
2025_MES_718642_1
8651/E8
Open Tender
Civil Works
Item Rate
180 days
INS PALLAVA
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
AGE (I) NAVY CHENNAI
₹10,300
Yes
9 Oct 2025
7 Jul 2025
4 Aug 2025
7 Jul 2025
2 Aug 2025
21 Jul 2025
Amount
Taking down cement plaster on brick walls including racking out joints, hacking for key, scrubbing down with water etc Complete all as specified and directed by Engineer-in-Charge.
M&L for Rendering 15 mm thick in two layers 10 mm thick backing coat in cm 1:6 and 5mm thick finishing coat in cm 1:4 . mixed with water proofing @ 2% by weight of cement finshed surfaces fair and even (Note :- WPC will be measured separately). Complete all as specified and directed by Engineer-in-Charge.
M & L for demolistion of Concrete (reinforced) of any description and in any position not otherwise specifically provided .
M & L for laying reinforced cement concrete TypeB0 1:2:4 (12.5mm graded aggregate) in Beams, cantilevers, bressumm- ers, lintels over 1.5m span Complete all as specified
M & L for laying reinforced cement concrete TypeB0 1:2:4 (12.5mm graded aggregate) in chajjas Complete all as specified
M & L for laying the Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.
M & L for laying Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips with the existing bars using the rebar injection chemical. (Note: The rebar injection chemical will be paid separately)
M & L for laying Mild steel bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips with the existing bars using the rebar injection chemical. (Note: The rebar injection chemical will be paid separately)
M& L for making of 1 no holes size of 8mm dia and depth of 200 mm for chajjas and canopy for fixing of TMT bars by applying the HILti Hilt RE 500 V3 chemical as per Manufacturer specification.
M &L for complete removal of existing treatment and applying walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) newly plastered or unplastered wall surface including preparation of surface,Complete all as specified and directed by Engineer-in-Charge.
Preparation of old decorated/ plastered or unplastered wall over 10 cm grith or width surfaces any applying one coat of Synthetic Emulsion paint complete all as specified and directed.
M&L PCC 1:3:6 type C1 (using 20 mm graded agg) as in padding concrete using water proofing compound @ 5% by weight to maintain required slope including coving to junctions of parapet and roofs Complete all as specified
S Dilli (BID ID -3372025)
S VENKATESAN (BID ID -3380212)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .