ADDITION /ALTERATION TO ROOM FOR AR/ VR BASED OP EMPLOYMENT TOOL FOR FIRE FIGHTING FACILITY AT AF STN KALAIKUNDA UNDER GE AF KALAIKUNDA

Amount

S&F of Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified including 4 mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to GI framework with screws complete all as sprcified and as directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing and depositing serviceable tiles where directed, and rubbish off the premises.

M&L Non–Skid joint free Coloured Tiles, 7 to 8mm thick, area of each tile exc 0.18 sqm but not exc 0.38 sqm, conforming to IS 15622, Grade B II, Laid on floor and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the shade of the Tiles over and incl. Screed Bed or Bedding Layer 15mm thick as in Floor in Cement Mortar 1:4 complete all as specified.

All as per BOQ Srl No 03.00 here-in- before but as in skirting laid over and including 10mm thick rendering in CM 1:3.

M&L for providing and injecting chemical emulsion for post construction Anti termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified

M&L for providing and injecting chemical emulsion for post construction Anti termite treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron. NOTE :(i) approximately 12 mm diameter holes shall be drilled as close as possible to the plinth wall at 300 mm apart, deep enough to reach the soil below, and the chemical emulsion pumped into these holes to sodk the soil below at a rate of 2.25 Iitres per linear metre. (ii) In soils which do not allow percolation of chemicals to the desired depth, the uniform dispersal of the chemical to a depth of 300 mm shall be obtained by suitably modifying the mode of treatment depending on the site condition. The dosage of 2,25 Iitres per linear metre shall however remain the same.

Taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as directed.

Materials and Labour for rendering 10mm thick, cement plaster, in cement mortar (1:6) on faces of brick work or concrete surface in walls, at any height and safety measures complete all as specified and directed.

Material & Labour for preparation of new surfaces of plastered walls and applying Two coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. over and including a coat of 1.0 mm thick white wall care putty (premium quality) over plastered surfaces of walls to prepare the surface even and smooth complete all as specified . .

M&L for preparing old decorated plastered or unplasterd surfaces of ceiling including cornices, pilasters and other wall features etc by brooming down or steel wire brushing and sand paper, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and removing extra wall papdi ,peel off wall papdi by sand paper and making good with external wall care putty as per existing thickness and applying two coats of white wash on ceiling complete all as specified and as directed.

Material & Labour for complete removal of existing treatment, preparation of surfaces of plastered walls and applying Two coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. over and including a coat of 1.0 mm thick white wall care putty (premium quality) over plastered surfaces of walls to prepare the surface even and smooth complete all as specified . .

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 sqm and n.exc 4.00 Sqmm each complete all as specified and as directed (unit rate shall be inclusive of demolition of cement concrete blocks for embedding hold fasts complete.)

S&F pressed steel door frames of size 125X60mm, of doors with one or more rebates including necessary fixing lugs, hinges(03 Nos of 100 mm size and 01 No of 50 mm size medium weight coled rolled mild steel butt hinges per leaf ) lock strike plate, etc incl one shop coat of priming complete all as specified and directed(Th 1.60 mm)

M &L PCC (1:3: 6) type C0 using 12.5 mm graded crushed stone aggregate as in bed plates & filling in prssed steel door frame complete.

S&F of Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing

Supply and fixing 2nd class hard wood, factory made, 35mm thick plain framed, glazed and skeleton shutter , open rebated and prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I Section 8, Clause 8.24 (b) supplied and fitted to chowkats.

S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.

S & F aluminium alloy sliding door bolts with hasp, staple and fixing clips of sheets, or extruded sections and fixing bolts and sliding bolts of extruded sections of aluminium alloy, 300 mm long, anodized to a bright natural, mat finish not be less than Grade AC 10 of IS 1868 : 1996 complete all as specified and as directed.

S&F aluminium barrel tower bolts with barrel and bolt of extruded sections of aluminium alloys, 200 mm long, anodized finish not be less than Grade AC 10 of IS 1868 : 1996 with transparent anodic film complete all as specified and as directed.

S&F 150mm aluminum extruded aluminium alloy handles (fabricated type) anodised of mat finish not be less than Grade AC 10 of IS 1868 : 1996 complete all as specified and as directed.

S&F of Mild steel 300mm long, ordinary rat tail rod pattern springs including roller and roller plate and necessaru welding for fixing complete

S&F of 150mm long (Overall length of cover plate) Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor

S&F in repairs 19/20mm dia SS curtain rod of grade SS-202 complete

S&F in repairs Curtain Knobs/Finials with Supports suitable for 19/20mm dia Curtain Rod/Pipe complete.

S&F in repairs 40mm wide and 5mm thick PVC door seal (snake guard) with powder coated aluminium frame

M & L for preparation of new or previously untreated wood or wooden surfaces, of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Cutting holes into or through brick walls built in cement mortar Superficial area Exc. 150 sq. cm but n exc 400 sq. cm. and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50 sqm each complete all as specified and as directed (unit rate shall be inclusive of demolition of cement concrete blocks for embedding hold fasts complete.)

S & F of Powder coated (minimum thickness of powder coating 50 micron) Aluminium alloy sliding windows with frames 20mm series, 3 track sliding shutters comprising of 3 track bottom frame weighing not less than 1.006 Kg/RM and side & top frame weighing not less than 0.876 kg/RM, top & bottom rails of shutter weighing not less than 0.46 kg/RM, vertical style weighing not less than 0.398kg/RM and interlocking style weighing not less than 0.489kg/RM, duly fitted with neoprene/EPDM gasket, beading, glazing clips ect. two shutters tinted glass panes 4.80 mm nominal thickness and one shutter with stainless steel wire cloth 0.36mm dia and average width of aperture 1.4mm , aluminium alloy handles etc. complete with and including aluminium deco grill medium grade of mesh size 75mmx75mm with 6mm square anodised aluminium bars fixed with aluminium frame of size 37x19x2mm all as specified complete in all respect area exc 0.90 sqm. but n. exc 1.50 sqm.

Taking down carefully point wiring for one light, socket or power etc incl all fittings such as switches sockets, holders, light fittings, fan requlators etc and making good the disturbed surface of wall, ceiling etc including seperating serviceabel light fittings, switches etc and keeping in safe custody for reuse and removal of unserviceable materials from site complete all as specified and directed.

M & L for concealed point wiring for power point complete with 4.00 sq mm FRLS,PVC insulated multi stranded copper conductor single core cable 1100 volts grade (Red/yellow/blue wires for phases and black wire for neutral),drawn into and including non metalic PVC rigid conduit medium grade of suitable size and conduit accessories fixed on wall, floor, roof etc. and including provision of PVC FRLS insulated 4.00 sq mm copper conductor for earth continuity (Green Colour) and connected to common earth dolly including fixing of metal plug and socket and necessary connection with suitable size if copper/brass thimbles complete. Note:- Cost of PVC conduit, cutting chases of wall, making good disturbed wall surfaces including finishing with cement mortor 1:4, matching with existing colour/paint of surface and modular box, modular cover plate with frame are deemed to be included in the quoted rate. (b) Metal plug and socket will be measured and paid separately.

M & L for concealed point wiring complete with 1.5 sq mm FRLS,PVC insulated multi stranded copper conductor single core cable 1100 volts grade (Red/yellow/blue wires for phases and black wire for neutral),drawn into and including non metalic PVC rigid conduit medium grade of suitable size and conduit accessories fixed on wall, floor, roof etc. and including provision of PVC FRLS insulated 1.5 sq mm copper conductor for earth continuity (Green Colour) and connected to common earth dolly and including pressed steel terminal flush boxes made out of 1.6 mm thick MS sheet suitable for modular switches concealed in wall and modular cover plate with frame for housing the switches socket,outlet etc.,all as specified and directed by Engineer-in-Charge for one light point controled by one one way 5/6 Amp switch Note:- (a) Note :- Cost of PVC conduit, cutting chases of wall, making good disturbed wall surfaces including finishing with cement mortor 1:4, matching with existing colour/paint of surface and modular box, modular cover plate with frame are deemed to be included in the quoted rate.

All as per BOQ item No 32.00 here-in-before but for one fan point.

All as per BOQ item No 32.00 here-in-before but for one 5 pin socket outlet 06 Amps on independent board ( but Not below the switch board of light points in the same vertical plane) except modular box, modular cover and plate.

All as per BOQ item No 32.00 here-in-before but for one power pointt using by 2.50 sq mm copper conductor cable with 2.50 sq mm PVC insulated single core copper cable for earth continuity conductor, on independent board ( but Not below the switch board of light points in the same vertical plane).

Supply & fixing modular switch one module single pole 5/6 Amps one way.

S & F ceiling roses, 6A, 240 V, surface type, intended to support mechanical loads by means of flexible cord, having provision for the connection of switch wiring, screw type terminal, made out of Polyamide or hornbean complete all as specified and as directed.

Supply and fix modular switch 1 way, 16 amps, 1 module.

Supply and fix modular socket, 6 Amps, 2/3 pin combined 2 module

Supply and fix modular socket, 6/16 Amps, 2/3 pin combined 2 module

Supply and fix modular Fan regulator step type, 120W - 2 module

S&F LED 18/20 Watt tube light fitting (T8 type), double side connection type including LED retrofit tube lamp 20 W , LED tube light nominal power 18/20 Watt, LED of Make Osram; Everlight; Philips; Nicha; Cree; Samsung, LED wattage of minimum 1 watt each and Maximum 3 watt each, operational voltage of 170 volts to 270 volts, frequency of 50 Hz, lumen efficacy of minimum 120 lumens per watt, , integrated electronic driver (SMP based constant current supply) with output short circuit protection and surge protection upto 2.5 KV, protection grade IP 20, CRI greater than 80%, bema angle of 120 clear, THD below or less than 20%, CW available CCT of 6500K, power factor of minimum 0.95 polycarbonate housing life span of minimum 50000 working hours complete fitting including connecting with PVC insulated multistranded copper flexible cable 1.0 sqmm three core, and PVC round/ square box white colour x 2 Nos for mounting of fitting including taking down old unserviceable complete all as specified & directed:

S&F recess mounting luminaire (PANEL LIGHTING) with high performance LEDs, suitable for mounting with Armstrong/Grid ceiling Fixture size: (LxW) in (595x595) mm LED 34 Watt (or nearest next higher watt) with CRCA powder coated housing (white after phosphochromate treatment) High efficiency long life LED package in integral module with lumen efficacy of >120 lm/W and viewing angle of 120° to ensure better uniformity, electronic LED driver (SMPS based constant current supply) with Output Short-circuit protection, Surge protection & other reliability test as per IS:15885 Part 2/Sec 13. LED of Make Osram; Everlight; Philips; Nicha; Cree; Samsung, operational voltage of 170 volts to 270 volts, frequency of 50 Hz, lumen output of minimum 4350, protection grade IP 20, CRI greater than or equal to 80%, THD below or less than 20%, CW available CCT of 6500K, power factor of minimum 0.95 , life span of minimum 50000 working hours complete fitting including connecting with PVC insulated multistranded copper flexible cable 1.0 sqmm three core, including taking down old unserviceable complete all as specified & directed:

Supply and Fixing of wall mounted Fan of size 400 mm sweep, oscillating and tilting type, 230/240 Volts AC complete with all acessories including necessary electric connection as specefied and as directed.

Taking down ceiling fan, sealing cable end, dismantling blades, keep in safe custody at site and refixing/Hanging on its original position after assembling, of any Sweep and Make and connecting up with and including Provision of Flexible Copper 3 Core Wire of 1.00 Sqmm, from Ceiling Rose/Connector to Fan, when directed complete all as specified and as directed.

S & F single pole and neutral enclosure with two pin and earth, plug and socket , suitable for single phase 240 V,complete with and including one single pole MCB of capacity 20 amps having `C` charactristic, breaking cap 10 KA, including industial plug top, complete all as specified and as directed.

S & F in repairs sheet metal enclosure for MCB, DB, TPN, 240 Volts, 200 amps rated copper busbar, 4 way Double door enclosure made up of CRCA sheet steel, RAL powder coated, IP 43,IK09 including fixing the DB box flush in wall of any type and making good the distrubed surface to match as the existing with and electrically connecting up complete all as specefied.

S&F MCB TPN 240 volts 63 Amps, 10 KA breaking capacity, 'C' Curve including connection with suitable size copper lugs complete all as specified and directed by Engr-In-Charge .

S&F MCB SP 240 volts 6 to 32 Amps, 10 KA breaking capacity, 'C' Curve including connection with suitable size copper lugs complete all as specified and directed by Engr-In-Charge .

Supply, Installation, testing and commisioning of split type Air Conditioner of capacity 1.5 TR with hermitically sealed unit complete with dual system i.e cooling and with PCB and remote operationon (R-410A refrigerant) built in air ioniser and plasma filter for better indoor air quality, electric driven suitable for working on 230 Volt, single phase, 50 Hz supply, (5 STAR rating inverter type) complete incl providing required copper piping, insulation etc cutting of wall, powder coated steel brackets and making good disturbed surface of wall etc and remote operation complete all as specified and directed.

Supply and installed voltage stabilizer 17.6 Amp wall mounting type for automatic operation, single phase, naturally air cooled indoor type and designed for input variation between 130 V to 280 with out put voltage stabilized at 200 V to 230 V accuracy of + 2.0%, copper wound complete all as specified

SHARMA ENTERPRISES

SUMAN CONSTRUCTION