Loading
Loading…
Loading…
Tender Value
₹8.9 L
EMD Value
₹17,900
Closing Date
10 Sept 2026, 3:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (WMS)
SMS
13 conditions · 2 needing a document upload
"The bidder shall be accredited by NABL or an equivalent accreditation body under ISO/IEC 17025:2005 or the latest applicable version of the standard, for calibration of the relevant instruments and ranges covered under the scope of work".Note:- (I) For the purpose of this tender, an equivalent accreditation body shall mean an accreditation body that is a Full Member and a signatory to the Mutual Recognition Arrangement (MRA) of the International Laboratory Accreditation Cooperation (ILAC) and the Asia Pacific Accreditation Cooperation (APAC).(II) The bidder shall submit a copy of the valid Accreditation Certificate along with the relevant Scope of Calibration (Scope of Accreditation) as part of the bid, failing which the bidder's offer shall be summarily rejected.
The tenderer is required to be registered with the EPFO. The tenderer has to submit the registration certificate/relevant document along with the tender/bid, failing which the bid shall be summarily rejected.
I/we the tenderer (s) am/are signing this document after carefully reading the contents.
I/We the tenderer(s) also accept all the conditions of the tender and have signed all the pages in confirmation thereof.
I/we hereby declare that I/we have downloaded the tender documents from Indian Railway website www.ireps.gov.in . I/we have verified the content of the document from the website and there is no addition, no deletion or no alteration to the content of the tender document. In case of any discrepancy noticed at any stage i.e. evaluation of tenders, execution of work or final payment of the contract, the master copy available with the railway Administration shall be final and binding upon me/us.
I/we declare and certify that I/we have not made any misleading or false representation in the forms, statements and attachments in proof of the qualification requirements.
I/We also understand that my/our offer will be evaluated based on the documents/credentials submitted along with the offer and same shall be binding upon me/us.
I/We declare that the information and documents submitted along with the tender by me/us are correct and I/we are fully responsible for the correctness of the information and documents, submitted by us.
I/we certify that I/we the tenderer(s) is/are not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of submission of bids, either in individual capacity or as a HUF/ member of the partnership firm/LLP/JV/Society/Trust.
I/we understand that if the contents of the certificate submitted by us are found to be forged/false at any time during process for evaluation of tenders, it shall lead to forfeiture of the Bid Security and may also lead to any other action provided in the contract including banning of business for a period of upto two year. Further, I/we and all my/our constituents understand that my/our offer shall be summarily rejected.
I/we also understand that if the contents of the certificate submitted by us are found to be false/forged at any time after the award of the contract, it will lead to termination of the contract, along with forfeiture of Bid Security/Security Deposit and Performance guarantee and may also lead to any other action provided in the contract including banning of business for a period of upto two year.
I/We have read the clause regarding restriction on procurement from a bidder of a country which shares a land border with India and certify that I am/We are not from such a country or, if from such a country, have been registered with the competent Authority. I/We hereby certify that I/we fulfil all the requirements in this regard and am/are eligible to be considered (evidence of valid registration by the competent authority is enclosed)
14 conditions · 3 needing a document upload
I/We have visited the works site and I/We am/are aware of the site conditions.
I/We hereby agree to abide by latest Indian Railways Standard General conditions of Contract, with all correction slips up to date and to carry out the work according to the special conditions of contract.
I/We have read and understood the various conditions to the 1.1.1 tender attached hereto and agree to abide by the said conditions.
LC- It has been decided by Board (MRS, MTR, ME, FC, CRB) that henceforth, all works tenders or service tenders invited by railways through e-tendering on IREPS, having advertised value o f 10 lakh and above, shall include in tender conditions, an option for the contractor to take payment from Railways through a letter of credit (LC) arrangement.
All commercial Compliance as in attached tender document.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Calibration of various Measuring Instruments & Gauges of various shops for 02 years as per Scope of Work.
MCFRBLC69918082026~MCF
MCFRBLC69918082026
Open
Works - General
24 Months
Rae Bareli, Uttar Pradesh
₹0
₹17,900
18 Aug 2026
18 Aug 2026
27 Aug 2026
95 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 8,94,305.83 | ||
| — | 488.00 | — | — | ||
| Calibration of :- Bevel Protector,Bore Gauge,Dial Gauge (Plunger Type),Dial Gauge (lever type),Dial Indicator (Plunger Type),Dial Snap Gauge,Dial Vernier Caliper,Digital angle protector,Digital Bevel Protector,Digital Bore Gauge,Digital Dial Gauge (Plunger Type),Digital External Micrometer,Digital Indicator (Plunger Type),Digital Inside Caliper,Digital Radius Gauge,Digital Three Point Internal Micrometer,Digital Vernier Caliper,Digital Wheel Distance Gauge,Door Width Gauge,External Micrometer etc as per Sr.No. 01 of Annexure-A of Scope of Work. | — | — | — | 55,998 | |
| — | 1620.00 | — | — | ||
| Calibration of :- Door Diagonal Gauge,Magnifying glass,Pressure Gauge,Shell Body Width Gauge,Sprit level,Try Square,Vestibule Foot Plate Gauge etc as per Sr.No. 02 of Annexure-A of Scope of Work. | — | — | — | 1,98,288 | |
| — | 596.00 | — | — | ||
| Calibration of :-Buffer Height Gauge,Digital Depth Gauge,Door Height Gauge,Flexibility & Adhesion Tester,Gloss meter,Measuring Tape,Pressure Gauge,Thread Wear Measuring Gauge,Tubular Inside Micrometer,X-Brace Height Gauge etc as per Sr.No. 03 of Annexure- A of Scope of Work. | — | — | — | 91,188 | |
| — | 38.00 | — | — | ||
| Calibration of :-Height Gauge,Steel Scale, etc as per Sr.No. 04 of Annexure-A of Scope of Work. | — | — | — | 6,104.7 | |
| — | 6.00 | — | — | ||
| Calibration of :-Thread Depth Gauge,Vernier Caliper, etc as per Sr.No. 05 of Annexure-A of Scope of Work. | — | — | — | 1,101.6 | |
| — | 6.00 | — | — | ||
| Calibration of :- Master Piece For Snap Gauge, Digital Vernier Caliper etc as per Sr.No. 06 of Annexure-A of Scope of Work. | — | — | — | 720 | |
| — | 152.00 | — | — | ||
| Calibration of :- Coating Thickness Gauge,Digital Multimeter,Inside Spring calliper,Insulation resistance Tester, Lux Meter, Oil Measuring Cane,Outside Spring calliper,Straight Edge etc as per Sr.No. 07 of Annexure-A of Scope of Work. | — | — | — | 32,558.4 | |
| — | 22.00 | — | — | ||
| Calibration of :- Infrared Thermometer,Setting Ring For Internal Dia,Viscosity Ford Cup etc as per Sr.No. 08 of Annexure-A of Scope of Work. | — | — | — | 5,049 | |
| — | 10.00 | — | — | ||
| Calibration of :- Digital Height Gauge,Dovetail Square 3",Vernier Caliper etc as per Sr.No. 08 of Annexure-A of Scope of Work. | — | — | — | 2,448 | |
| — | 92.00 | — | — | ||
| Calibration of :- Ammeter,Digital HV Tester,Digital Stop watch, Digital Welding Gauge,Magnet, Volt Meter etc as per Sr.No. 10 of Annexure-A of Scope of Work. | — | — | — | 25,336.8 | |
| — | 52.00 | — | — | ||
| Calibration of :- Centre square,Digital Clamp Meter, High Voltage Tester, Spring Balance,Straight Edge etc as per Sr.No. 11 of Annexure-A of Scope of Work. | — | — | — | 15,912 | |
| — | 4.00 | — | — | ||
| Calibration of :-Straight Edge etc as per Sr.No. 12 of Annexure-A of Scope of Work. | — | — | — | 1,377 | |
| — | 222.00 | — | — | ||
| Calibration of :- Digital Weighing Balance,Drill Angle Gauge,Master Piece of scale,Master Sphere For CMM,Wheel Profile Turning Template,Torque Wrench etc as per Sr.No. 13 of Annexure-A of Scope of Work. | — | — | — | 81,518.4 | |
| — | 14.00 | — | — | ||
| Calibration of :-Digital Height Gauge, Digital Sound Level Meter, Torque Wrench etc as per Sr.No. 14 of Annexure-A of Scope of Work. | — | — | — | 5,997.6 | |
| — | 4.00 | — | — | ||
| Calibration of :- Combination try square set,SW Gauge etc as per Sr.No. 15 of Annexure-A of Scope of Work. | — | — | — | 1,836 | |
| — | 2.00 | — | — | ||
| Calibration of :- Step Gauge etc as per Sr.No. 16 of Annexure-A of Scope of Work. | — | — | — | 979.2 | |
| — | 6.00 | — | — | ||
| Calibration of :- Digital Laser Gauge etc as per Sr.No. 17 of Annexure-A of Scope of Work. | — | — | — | 3,213 | |
| — | 30.00 | — | — | ||
| Calibration of :- Torque Wrench etc as per Sr.No. 18 of Annexure-A of Scope of Work. | — | — | — | 16,500 | |
| — | 6.00 | — | — | ||
| Calibration of :-Surface Table etc as per Sr.No. 19 of Annexure-A of Scope of Work. | — | — | — | 4,131 | |
| — | 4.00 | — | — | ||
| Calibration of :-Torque Wrench etc as per Sr.No. 20 of Annexure-A of Scope of Work. | — | — | — | 2,937.6 | |
| — | 6.00 | — | — | ||
| Calibration of :-Micro Scope, Professional Line Laser etc as per Sr.No. 21 of Annexure- A of Scope of Work. | — | — | — | 4,590 | |
| — | 10.00 | — | — | ||
| Calibration of :-Automatic Welding Gauge, Digital Phase Sequence Tester, Field Indicator ,Profile Control Template etc as per Sr.No. 22 of Annexure-A of Scope of Work. | — | — | — | 7,956 | |
| — | 4.00 | — | — | ||
| Calibration of :- Hexagonal Wet Film Thick Gauge, Theodolite DSZ3 etc as per Sr.No. 23 of Annexure-A of Scope of Work. | — | — | — | 3,672 | |
| — | 4.00 | — | — | ||
| Calibration of :- Digital Thermometer etc as per Sr.No. 24 of Annexure-A of Scope of Work. | — | — | — | 3,800 | |
| — | 22.00 | — | — | ||
| Calibration of :- Digital Surface Roughness Tester, Digital Weighting Machine,Shell Height Gauge,Surface Roughness Tester etc as per Sr.No. 25 of Annexure-A of Scope of Work. | — | — | — | 26,928 | |
| — | 2.00 | — | — | ||
| Calibration of :- Digital OHM Meter etc as per Sr.No. 26 of Annexure-A of Scope of Work. | — | — | — | 3,196 | |
| — | 4.00 | — | — | ||
| Calibration of :- Thermal imager etc as per Sr.No. 27 of Annexure-A of Scope of Work. | — | — | — | 7,200 | |
| — | 8.00 | — | — | ||
| Calibration of :- Digital Air flow meter, Oil Measuring Gauge (Drum) etc as per Sr.No. 28 of Annexure-A of Scope of Work. | — | — | — | 27,540 | |
| — | 4.00 | — | — | ||
| Calibration of :-Wheel Diameter gauges etc as per Sr.No. 29 of Annexure-A of Scope of Work. | — | — | — | 600 | |
| — | 4.00 | — | — | ||
| Calibration of :-Digital Bore Gauge etc as per Sr.No. 30 of Annexure-A of Scope of Work. | — | — | — | 800 | |
| — | 4.00 | — | — | ||
| Calibration of :-DFT Meter, Digital Insulation resistance Tester etc as per Sr.No. 31 of Annexure-A of Scope of Work. | — | — | — | 1,120 | |
| — | 4.00 | — | — | ||
| Calibration of :-Temperature Gauge etc as per Sr.No. 32 of Annexure-A of Scope of Work. | — | — | — | 1,600 | |
| — | 12.00 | — | — | ||
| Calibration of :-Digital Torque Wrench, Torque Wrench etc as per Sr.No. 33 of Annexure-A of Scope of Work. | — | — | — | 5,760 | |
| — | 2.00 | — | — | ||
| Calibration of :-Screw pitch gauges etc as per Sr.No. 34 of Annexure-A of Scope of Work. | — | — | — | 1,000 | |
| — | 2.00 | — | — | ||
| Calibration of :-Scratch Hardness Tester etc as per Sr.No. 35 of Annexure-A of Scope of Work. | — | — | — | 1,400 | |
| — | 2.00 | — | — | ||
| Calibration of :-5 KV insulator Tester etc as per Sr.No. 36 of Annexure-A of Scope of Work. | — | — | — | 2,400 | |
| — | 12.00 | — | — | ||
| Calibration of :-Digital Anemometer etc as per Sr.No. 37 of Annexure-A of Scope of Work. | — | — | — | 54,000 | |
| — | 10.00 | — | — | ||
| Calibration of :-Hydraulic crimping tool etc as per Sr.No. 38 of Annexure-A of Scope of Work. | — | — | — | 25,000 | |
| — | 12.00 | — | — | ||
| Calibration of :-Straight Edge etc as per Sr.No. 39 of Annexure-A of Scope of Work. | — | — | — | 3,000 | |
| — | 8.00 | — | — | ||
| Calibration of :-Pressure Gauge etc as per Sr.No. 40 of Annexure-A of Scope of Work. | — | — | — | 1,280 | |
| — | 10.00 | — | — | ||
| Calibration of :-Step Gauge etc as per Sr.No. 41 of Annexure-A of Scope of Work. | — | — | — | 1,250 | |
| — | 4.00 | — | — | ||
| Calibration of :-Horizontal & Vertical Level Gauge Magnetic base etc as per Sr.No. 42 of Annexure-A of Scope of Work. | — | — | — | 720 | |
| — | 40.00 | — | — | ||
| Calibration of :-Digital Torque Wrench etc as per Sr.No. 43 of Annexure-A of Scope of Work. | — | — | — | 15,000 | |
| — | 4.00 | — | — | ||
| Calibration of :-Manual Plate Welding Gauge etc as per Sr.No. 44 of Annexure-A of Scope of Work. | — | — | — | 1,200 | |
| — | 4.00 | — | — | ||
| Calibration of :-BCG Manual Plate Welding Gauge etc as per Sr.No. 45 of Annexure-A of Scope of Work. | — | — | — | 1,120 | |
| — | 16.00 | — | — | ||
| Calibration of :-Pressure Gauge etc as per Sr.No. 46 of Annexure-A of Scope of Work. | — | — | — | 2,560 | |
| — | — | — | 1,36,419.53 | ||
| — | GST @ 18% | — | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
TenderDocumentC699.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].