Construction of Laundry Room for Fort Circuit House and Annexe Circuit House, Diu

Amount

Works

Providing and laying White Stone Bela mesonry block in course in foundation and plinth with stone of approved quality in Lime Mortar 1:5 (1-Cement :5- course sand) including packing the joints etc. complete.

Filling in foundation and plinth with Rubble Soling in layers of 20cm. thickness including watering, remming and consolidating etc. complete.

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth

Providing and laying White Stone Bela mesonry block in course in superstructure with stone of approved quality in Lime Mortar 1:5 (1-Cement :5- course sand) including packing the joints etc. complete.

Providing and laying cement coucrete work 1:1 1/2:3 (1- cement :1 1/2 coarse :3- graded stone aggregate 20mm nominal size) for R.C.C. lintel including finising smooth with curing etc. complete including the cost of formwork but excluding the cost reinforcement for upto floor two level (incl. cost of materials and labours).

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level

Providing and applying anticarrasive treatment with polymer base materials to the steel rainfarcement including descaling the dust and applying the preventive coating of approved make (for the R.C.C. structures near coastal area only) etc complete.

Providing 20mm thick cement plaster in single coat on single or half brick walls for interior plastering upto floor two level and finished even and smooth in (i) Cement mortar 1:3 (1-cement:3-sand)

20mm. Thick sand faced cement plaster on walls upto height 10 metres above ground level consisting of 12mm. Thick backing coat of C:M 1:3 (1-Cement : 3-Sand) and 8mm. Thick finishing coat of C:M 1:1 (1-Cement : 1-Sand) etc. complete.

Providing & laying Granite 18 mm thick (river/leather-polished) in risers of steps, skirting, dedo and pillars laid on 12 mm (average) thick cement mortar 1:3 (1- cement : 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing completed as directed by E.I.

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and jointed with color cement slurry including finised with flush pointing & cleaning the surface etc. complete for light shade

Providing and layingCeramic tiles 6mm thick in skrting risers of steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry

Provoding and fixing flush door shutters, solid core construction with frame of first class hardwood with cross board and face veneer or plywood face panels, including anodised alluminium butt hinges with necessary screws. (B) Non-decorative type and block board core anodised alluminium butt hinges in flush door shutters (2) 35 mm thick.

Providing and fixing window having extruded aluminum Colour anodized section frame main outer size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094 Kg / Rmt, horizontal two track member size 61.85 mm x 31.75 mm x 1.20mm @ wt.of 0.695 Kg/mt, vertical member of size 61.85 mm x 31.75mm x 1.30 mm @ wt.of 0.659 Kg/mt with sliding shutters of horizontal member size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt, vertical member of size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt, @ Wt. 0.457 Kg/mt with 5 mm thick transparentbronze colour tinted float glass with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per details etc complete for window.

Steel work, welded in built up sections framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint. (D) In trussses and trussed purlins, upto 25 M. span and 15 M. ovarall height.

Providing & fixing 8 mm thick Polycarbonate panel consist UV protected multicell / microcell structure having panel width of 600 / 900 mm to ensure best performance against windload, live load, vibration & visual appearance made of DANPALON or TUFFLITE. Panel shall be manufactured with vertical standing seam at both sides of the panel. The height of the standing seam is minimum 15 mm to ensure best connectore engagement. panel shall be fixed with snap on connectore with conti. double wall aluminium spacer along the standing seam to ensure best performence against wind up lift/herrican effect with a grip-lock double tooth locking mechanism. panel shall be co-extruded UV protected. panel ends shall be sealed with anti dust aluminium tape & aluminium profiles (mill finish) This includes the cost of labour incl. all accessories req. to fix this panels as per approved shades/colour and direction of engg. in charge. Comp. as per detail drawing & design.

Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint, brushing interior to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surface to give an even shade including throughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth.

Finishing wall with weather proof exterior emulsion paint on wall surface ( two coats ) to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials. Etc complete.

SKYWAY ENTERPRISE (BID ID -8872)

Kachhot Bhima Naran (BID ID -8867)