S R to Md Accn Bldg Nos P-124-05 to 07 , P-126/01 to 04(JCOs/ORs Md accn), Bldg No P-119/01 to 08 (Old OR Md Accn), Bldg No.P-125/01 to 08 (Old OR Md Accn) and repair to roof treatment to Bldg No. P-167/01 to 4 of 8 JAK RIF at Queens lineat GE(S) Jpr

Amount

05/SR/Bldg/20-21 Demolition of PCC in roof covering, roof kerbs, benching, coved fillets etc including old decayed water proofing treatment of any type all as directed by Engineer-in-charge. 05/SR/Bldg - 8.75 06/SR/Bldg - 8.75 07/SR/Bldg - 8.75 50/SR/Bldg- 6.25

M&L for surface preparation by removal of all loose particle to ensure clean, smooth and dry surface and laying 25mm thick PCC type B-0, (1:2:4) using 12.5mm graded stone aggregate finished even & smooth without using extra cement to cover negative slope into prop with WPC @ 3% by weight of cement. WPC will be measured and paid separately. 05/SR/Bldg - 300 06/SR/Bldg - 300 07/SR/Bldg - 300 50/SR/Bldg- 250

The surface shall be painted with one coat of polymeric primer @ 0.30 Kg per sqm, conforming to IS : 3384. A layer of APP based polymeric membrane, 3 mm thick (min), weighing not less than 3.5 Kg/m2 reinforced with polyster non woven fabric ( weighing not less than 150 gms/ Sqm). Application of polymeric membrane shall be by torch application all as per manufacturer instructions.and finally applying one coat of Bitumen coat @ 1.2 Kg/Sqm over APP Membrane before application of Aluminium paint. 05/SR/Bldg - 300 06/SR/Bldg - 300 07/SR/Bldg - 300 50/SR/Bldg- 250

M&L one coat of silvar paint over APP Membrane all as specified and directed by Engineer -in - chage. 05/SR/Bldg - 300 06/SR/Bldg - 300 07/SR/Bldg - 300 50/SR/Bldg- 250

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I 500 Ltrs Capacity including Dismantling old U/s water tanks & removing to store. 05/SR/Bldg - 8 06/SR/Bldg - 8 07/SR/Bldg - 8 50/SR/Bldg- 4

S&F Ball brass valves 20mm bore, high pressure, with polythene float & flynut complete, screwed for iron pipe or brass ferrule and fixed in repair. 05/SR/Bldg - 8 06/SR/Bldg - 8 07/SR/Bldg - 8 50/SR/Bldg- 4

Dismantling and taking up or down the existing unserviceable GI pipe and M&L for new galvanised steel water tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors of following sizes :-

15 mm bore 05/SR/Bldg - 20 06/SR/Bldg - 20 07/SR/Bldg - 20 50/SR/Bldg- 100

20 mm bore 05/SR/Bldg - 24 06/SR/Bldg - 24 07/SR/Bldg - 24 50/SR/Bldg- 50

25 mm bore. 05/SR/Bldg - 24 06/SR/Bldg - 24 07/SR/Bldg - 24 50/SR/Bldg- 50

Taking down cement plaster including raking out joints, hacking for key scrubbing down with water etc built in CM. 05/SR/Bldg - 650 06/SR/Bldg - 700 07/SR/Bldg - 700 50/SR/Bldg- 570

M&L rendering 15 mm thick in CM(1:6) on brick walls or concrete surface, surface finished even and smooth without using extra cement complete all as specified. 05/SR/Bldg - 500 06/SR/Bldg - 550 07/SR/Bldg - 550 50/SR/Bldg- 470

M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling surface finished even and smooth. 05/SR/Bldg - 150 06/SR/Bldg - 150 07/SR/Bldg - 150 50/SR/Bldg- 100

Taking down Chowkats or frames not exc 1.5 sq. m each with shutters (without taking off shutters from the frames). 05/SR/Bldg - 32 06/SR/Bldg - 32 07/SR/Bldg - 32

Taking down shutters of any description exc 1 sqm and n exc 2 sqm each. 05/SR/Bldg - 16 06/SR/Bldg - 16 07/SR/Bldg - 16

Providing and fixing 28mm thick factory made PVC Supreme Door Shutter consisting of frame made out of m.S. tubes of 19 gauge thickness nd size of 40mmx20mm for stiles, top and bottom rails having a coat of steel primers of approved make and manufacture. M.S. Frame covered with 4mm thick heat moulded "Rajshri" Prelam PVC 'C' Channel of size 28mm thickness,75mm width out of which 60mm shall be flat and 15mm shall be tapered in 45dgree angle on either sides forming stiles, top and bottom rail and 100mm wide Rajshri Prelam PVC sheet out of which 100mm shall be be flat and 15mm shall be tapered An additional of 5mm thick PVC sheet of 20mm width is to be stuck on the interior side of 'C' Channel using PVC solvent adhesive etc. complete on both sides to form lock rail.Lock rail shall be provided on either side of panel. Panelling of 4mm thick PVC sheet to be fitted in the MS Frame welded/sealed to the stiles with 8mm (4mm + 4mm) x 12mm wide PVC sheet as beading on inner side and 8mm (4mm + 4mm) x 20mm wide PVC sheet as beading on the inner tapered side of lock rails joined together with solvent cement adhesive. An additional of 4mm thick PVC sheet of 20mm width is to be stuck on the interior side of 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification and drawing. 05/SR/Bldg - 30 06/SR/Bldg - 30 07/SR/Bldg - 30

Providing and Fixing Factory made Adjustable (PVC) Doorframe Manufactured by M/s Rajshri of the size 65mm x 60mm with a wall thicknes of 4mm, made out of extruded 4mm PVC foam sheet, metre cut at two corners and joined with 2nos. of 150mm long brackets of 15 x 15mm M.S. Square tube. The two vertical door profile are to be reinforced with 40 x 20mm M.S. tube of 19 guage through out the frame. The doorframe shall be fixed to the wall using 65/100mm long M.S. Screw through the frame by using PVC fastners. A minimum of 4 nos. of screws to be provided for each vertical member & minimum 2 nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-Charge. 05/SR/Bldg - 80 06/SR/Bldg - 80 07/SR/Bldg - 80

35mm thick IInd class hard wood factory made plain, framed, panelled shutter (two panel) with lock rail & panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail & steel as per IS:1003 (Part-I) kiln seasoned & chemically pressure treated. 05/SR/Bldg - 8 06/SR/Bldg - 8 07/SR/Bldg - 8

35mm thick 2nd class hard wood factory made Glazed and skelton shutters open rebated & prepared to receive glass gauze etc (without sash bars) edges of framing plain chamfered / rounded fitted without & mitred beads for securing glass etc size of members of shutters as specified in SSR Part-I Section 8 Clause 8.2 (a) supplied & fitted to chowkats. 05/SR/Bldg - 8 06/SR/Bldg - 8 07/SR/Bldg - 8

Cutting holes in stone / brick walls built in CM for inserting hold fast & making good dismantled portion in CM (1:3) depth of embaded portion of holdfast n. exc half brick. 05/SR/Bldg - 128 06/SR/Bldg - 56 07/SR/Bldg - 56

MS butt hinges medium weight, cold rolled size of hinge 100 mm long. 05/SR/Bldg -75 06/SR/Bldg - 75 07/SR/Bldg - 75

Mild steel sliding door bolt plate type stove enameled black with bright bolt not less than 12mm dia with & including a minimum of 6 bolt & nut four on bolt plate & 2 on staple plate & fixed length of bolt 300 mm. 05/SR/Bldg -4 06/SR/Bldg - 4 07/SR/Bldg - 8

Mild steel pressed handle oval type stove enameled black 125mm size. 05/SR/Bldg - 48 06/SR/Bldg - 48 07/SR/Bldg - 48

MS tower bolt, stove enameled black with bright bolt, length of bolt 150mm. 05/SR/Bldg - 48 06/SR/Bldg - 48 07/SR/Bldg - 48

Preparing new wooden surface applying two coats of synthetic enamel paint on over a coat of pink primer wooden surfaces of any description, not otherwise, described, over 10cm width or girth complete all on specified and directed. 05/SR/Bldg - 34 06/SR/Bldg - 40 07/SR/Bldg - 34

Factory made steel ventilators with top hung shutters incl hinge steel peg stay complete incl. taking down old ventilator. 05/SR/Bldg - 8 06/SR/Bldg - 8 07/SR/Bldg - 8

Hacking out old broken glass pane (any thickness, size, quality/ description) from metal/wood frame including punching or drilling out old glass panes, pins, springs, clips & providing & fixing new ones 3 mm thick plain sheet glass ordinary quality in square not exceeding 0.50 Sqm in each pane. glazed with oil putty. 05/SR/Bldg - 20 06/SR/Bldg - 20 07/SR/Bldg - 20 50/SR/Bldg - 20

S&F Sheet glass 4.0mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane. 05/SR/Bldg - 8 06/SR/Bldg - 8 07/SR/Bldg - 8 50/SR/Bldg - 10

S&F Galvanised mild steel wire cloth, 0.56 nominal dia of wire & average width of aperture 1.18mm with tinned tacks, or galvanised wire staples. 05/SR/Bldg - 10 06/SR/Bldg -10 07/SR/Bldg - 10

Applying two coats of synthetic enamel paint cover a coat of zinc Chrome primer on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface. 05/SR/Bldg - 13 06/SR/Bldg - 5 07/SR/Bldg - 12.8

M&L 50 mm thick PCC type C-1 (1:3:6) using 20 mm graded stone aggregate finished even and smooth without using extra cement as in plinth protection. 05/SR/Bldg - 75 06/SR/Bldg - 75 07/SR/Bldg - 75 50/SR/Bldg - 55

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. 05/SR/Bldg - 565 06/SR/Bldg - 565 07/SR/Bldg - 565

S&F Coloured Glazed ceramic tilessize 300x450mm x 7mm thick edge cut/ joint free , on walls etc. set & jointed of in neat cement slurry & pointed in white/coloured cement to match over 15mm thick plaster in CM(1:4). 05/SR/Bldg - 265 06/SR/Bldg - 265 07/SR/Bldg - 265

S&F Coloured Non Skid ceramic tiles 6 to 7mm thick edge cut/ joint free (squares/ rectangular) area of each tile exc. 0.11 sqm but not exc. 0.18 sqm, in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match over 15mm thick screed bed in CM(1:4). 05/SR/Bldg - 300 06/SR/Bldg - 300 07/SR/Bldg - 300

S&F sink made of stainless steel 1.0 mm thick for kitchen with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or with & including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410 x 330 x160 mm including waste pipe of polythelene of low or high density or PVC 32mm dia & waste fitting brass chromium plated for 32mm bore with long screwed shanks and fly nuts including making holes in stone walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0 complete. 05/SR/Bldg - 07 06/SR/Bldg - 08 07/SR/Bldg - 08

S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors including taking down existing pipe. 05/SR/Bldg - 24 06/SR/Bldg - 24 07/SR/Bldg -24

S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors including taking down existing pipe. 05/SR/Bldg - 24 06/SR/Bldg - 24 07/SR/Bldg -24

S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints fixed to walls including taking down existing pipe. 05/SR/Bldg - 28 06/SR/Bldg - 28 07/SR/Bldg - 28 50/SR/Bldg - 40

S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints fixed to walls including taking down existing pipe. 05/SR/Bldg - 28 06/SR/Bldg - 28 07/SR/Bldg - 28 50/SR/Bldg - 40

S&F PVC (SWR) bends any radius 75mm dia. 05/SR/Bldg - 15 06/SR/Bldg - 15 07/SR/Bldg - 15 50/SR/Bldg - 04

S&F PVC (SWR) bends any radius 110mm dia. 05/SR/Bldg - 15 06/SR/Bldg - 15 07/SR/Bldg - 15 50/SR/Bldg - 04

S&F PVC (SWR), junction single, (Single T) equal or unequal 75mm dia 05/SR/Bldg - 16 06/SR/Bldg - 16 07/SR/Bldg - 16 50/SR/Bldg - 04

S&F PVC (SWR), junction single, (Single T) equal or unequal 110mm dia. 05/SR/Bldg - 16 06/SR/Bldg - 16 07/SR/Bldg - 16 50/SR/Bldg - 04

S&F PVC (SWR) vent cowl 110mm dia. 05/SR/Bldg - 07 06/SR/Bldg - 08 07/SR/Bldg - 08 50/SR/Bldg - 04

S/F fixed in repair Vitreous China wash basin, white, flat back, size 550x400mm but including brackets, coupling and waste pipe complete 05/SR/Bldg - 07 06/SR/Bldg - 08 07/SR/Bldg - 08

S/F in repair stop valves, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends fancy type chromium plated with long shank and cup (concealed type), 15 mm. 05/SR/Bldg - 07 06/SR/Bldg - 08 07/SR/Bldg - 08

S/F in repair brass CP Angle stop cock fancy type concealled type long body,15 mm bore. 05/SR/Bldg - 15 06/SR/Bldg - 15 07/SR/Bldg - 15

S/F in repair 15 mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed. 05/SR/Bldg - 7 06/SR/Bldg - 8 07/SR/Bldg - 8

S/F in repair Bib taps, cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule and fixed, fancy type chromium plated long body complete. 05/SR/Bldg - 24 06/SR/Bldg - 24 07/SR/Bldg - 24

S/F PVC connections 15mm size with PTMT nuts of length 300mm. 05/SR/Bldg - 16 06/SR/Bldg - 16 07/SR/Bldg - 16

M&L Chromium plated Overhead Rain shower with relvoling joint and 115mm long shower arm with wall flange 15 mm bore fancy type any colour half turn (Make-MARC CAT PART NO MOR 1260 & 1240 or equivalent of GEM , JAQUAR) fixed in repair. 05/SR/Bldg - 7 06/SR/Bldg - 8 07/SR/Bldg - 8

S&F in repair PVC valve less syphonic action type low level flushing cistern coloured with inlet ball valve float and handle incl bracket 10 Lit capacity ( Make-HINDWARE CAT PART SLEEK PLUS or equivalent) fixed in repair. 05/SR/Bldg - 7 06/SR/Bldg - 8 07/SR/Bldg - 8

S&F in repair Stop valves 20 mm bore, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions. 05/SR/Bldg - 4 06/SR/Bldg - 4 07/SR/Bldg - 4 50/SR/Bldg - 4

All as per item No 51 above but of 25mm bore. 05/SR/Bldg - 4 06/SR/Bldg - 4 07/SR/Bldg - 4 50/SR/Bldg - 4

Dismantling of old U/S grating of any description or size and S&F PVC grating 125mm dia of weight not less than 40gm for floor trap / Nahani trap. 05/SR/Bldg - 16 06/SR/Bldg - 16 07/SR/Bldg - 16

S&F in repairs vitreous china squating Pan " orrisa Pattern" of size 580 x 440 mm white with integral footrest including provn of lime concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match existing surface complete all as directed Excluding flushing cistern and flushing pipe. 05/SR/Bldg - 7 06/SR/Bldg - 8 07/SR/Bldg - 8

S&F Soap dish vitreous china white approximate size 160 x 160 x 90mm equivalent. 05/SR/Bldg - 7 06/SR/Bldg - 8 07/SR/Bldg - 8

Preparing new plastered surfaces of ceiling and applying three coat of white wash on ceiling. 05/SR/Bldg - 150 06/SR/Bldg - 150 07/SR/Bldg - 150 50/SR/Bldg - 100

Preparing new plastered surfaces of wall and applying two coat of Dry distemper all as specified and directed by Eng-in-Charge. 05/SR/Bldg - 500 06/SR/Bldg - 550 07/SR/Bldg - 550 50/SR/Bldg - 170

Demolition of PCC in ground floors and pavings not exc 15cm thickness ( below or above ground level ). 05/SR/Bldg - 04 06/SR/Bldg - 04 07/SR/Bldg - 04

Factory made steel window with side hung shutters incl projecting type hinge with steel handle and steel peg stay complete with glazing bars dovetailed or welded incl. taking down old window. 05/SR/Bldg - 6 06/SR/Bldg - 8 07/SR/Bldg - 8

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, & steel peg stay, complete without glazing bars, dovetailed or welded incl. taking down old window. 05/SR/Bldg - 6 06/SR/Bldg - 8 07/SR/Bldg - 8

S&F Figured glass 4.0mm thick, pin head type & glazing with oil putty in squares n exc 0.5 sq.m in each pane. 05/SR/Bldg - 10 06/SR/Bldg - 10 07/SR/Bldg - 10 50/SR/Bldg - 10

M/L for Fancy type MS bracket suitable for curtain rod fixed in repair. 05/SR/Bldg - 40 06/SR/Bldg - 40 07/SR/Bldg - 40

M&l of 20 mm dia Drapery Fancy type curtain rod fixed in repair. 05/SR/Bldg - 67 06/SR/Bldg - 70 07/SR/Bldg - 80

M/L for caps/ side Bulbs PVC suitable for curtain rod fixed in repair. 05/SR/Bldg - 40 06/SR/Bldg - 40 07/SR/Bldg - 40

Supply only water profing compound. 05/SR/Bldg - 70 06/SR/Bldg - 75 07/SR/Bldg - 50 50/SR/Bldg - 55

M&L for providing circular, raised platform of height 20 cm below the tank and base 15cm more than the external dia of thank of PVC cylindrical water tank of capacity 500/1000 liters using PCC 1:3:6 type C1 using 20mm graded stone aggregate with smooth finish

BLANK

Preparation of new plastered surfaces of walls, pillars & cornices including brooming down and cleaning the surfaces & applying three coat of white wash all as specified and directed.

Preparation of new plastered surfaces of walls, pillars & cornices including brooming down and cleaning the surfaces & applying two coat of cement base paint all as specified and directed by Eng-in-Charge

RCC 1:2:4 type B-1, using 20 mm graded stone aggregate as in Man hole covers complete all as specified

M&L for TMT bars for reinforcement in man hole covers 8 mm and above al as specified

Demolition of RCC concrete complete all as specified

Dismantling of PVC (SWR) pipes 75 mm and 110 mm dia drain pipes complete all as specified.

05/SR/Bldg (E/M Portion) M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and unwelded sunken galvanized pressed steel terminal boxes of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulators as required for the following :-

One light / fan controlled by one switch. 05/SR/Bldg - 112 06/SR/Bldg - 128 07/SR/Bldg - 128

One socket outlet 6 amp controlled by one switch on the same board with other switches. 05/SR/Bldg - 21 06/SR/Bldg - 32 07/SR/Bldg - 32

One socket outlet 6 amp controlled by one switch on indepdendent board. 05/SR/Bldg - 21 06/SR/Bldg - 32 07/SR/Bldg - 32

One bell point controlled by one bell push. 05/SR/Bldg - 7 06/SR/Bldg - 8 07/SR/Bldg - 8

One light point controlled by two, two way switches. 05/SR/Bldg - 4 06/SR/Bldg - 2 07/SR/Bldg - 2

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 2.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal box of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets as required for one 16 amp socket outlet point controlled by one switch on independent board. 05/SR/Bldg - 21 06/SR/Bldg - 24 07/SR/Bldg - 24

Supply&.Fixing Switch piaon type 230/ 250V grade on top covers (catered in point wiring above) :-

Switch piano flush button single pole one way 6 amp complete. 05/SR/Bldg - 154 06/SR/Bldg - 192 07/SR/Bldg - 192

Switch piano flush button single pole one way 16 amp complete. 05/SR/Bldg - 21 06/SR/Bldg - 24 07/SR/Bldg - 24

Bell push, flush type, 6 amp 240 volts complete. 05/SR/Bldg - 7 06/SR/Bldg - 8 07/SR/Bldg - 8

Switch flush type, 6 amp, single pole, two way complete. 05/SR/Bldg - 8 06/SR/Bldg - 4 07/SR/Bldg - 4

S&Fixing socket outlet multipurpose use flush mounting type, 230/250 Volts grade(ISI Marked) on top covers (catered in point wiring above) :-

Socket outlet 2 in 1, 2 & 3 pin, 6 amp, flush type complete. 05/SR/Bldg - 42 06/SR/Bldg - 64 07/SR/Bldg - 64

Socket outlet 2 in 1, 3 pin 6 & 16 amp flush type complete. 05/SR/Bldg - 21 06/SR/Bldg - 24 07/SR/Bldg - 24

S&F angle holder, insulated polycabonate body with back plate complete including 9 watt LED bulb of Make : Bajaj/Wipro/Syska. 05/SR/Bldg - 28 06/SR/Bldg - 56 07/SR/Bldg - 56

S&F ceiling rose 3 plates polycarbonate body complete. 05/SR/Bldg - 77 06/SR/Bldg - 72 07/SR/Bldg - 72

S&F hum free electronic step fan regulator 120 - 280 volts of 100 watt capacity (socket type) including connecting up complete. 05/SR/Bldg - 21 06/SR/Bldg - 24 07/SR/Bldg - 24

S&F door bell, AC, 240 volts, single pole complete. 05/SR/Bldg - 7 06/SR/Bldg - 8 07/SR/Bldg - 8

Supply & fixing Energy saving envirnmental friendly, LED Light fittings 1 x 20 W 1200mm E lite LED Curve, high lumen batten with efficacy of 100+ lumens , impact proof,surface/wall mounting with PC housing in opal finish suitable for wet location with high brightness LEDs complete with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size. Make Havells Cat No LHEXBXPNIN1W020 or equivalent in Syska/Crompton/Bajaj. 05/SR/Bldg - 28 06/SR/Bldg - 22 07/SR/Bldg - 22

Supply & fixing , LED Light fittings 1 x 10W ,240 volt( size-2 feet/600 mm) , long life, corrosion resistant , surface/wall mounting IP 66 luminaire with PC housing in opal finish suitable for wet location with high brightness LEDs complete with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size. Make Havells Cat No LHEXARP7PN1W009 or equivalent in Syska/Crompton/Bajaj. 05/SR/Bldg - 14 06/SR/Bldg - 16 07/SR/Bldg - 16

Supply & fix wall Bracket light CITY-1 made of polycarbonate body suitable for 15 watt retrofit LED B22 Base including including 10W LED Lamp with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size. Make Havells Cat No LHDL02160099 or equivelent model in Bajaj/ Philips/Syska. 05/SR/Bldg - 07

M&L for Sub main wiring with two runs of 6 Sqmm single core FRLS PVC insulated but in unsheathed multi stranded copper conductor cable 1100 volts grade drawn through and including of 25mm dia PVC rigid conduit medium with conduit accessories and fixed to the surface of wall/ceiling as per ISI including 6.0 Sqmm PVC insulated copper conductor earth continuity wire. 05/SR/Bldg - 40 06/SR/Bldg - 40 07/SR/Bldg - 40

S&F Factory made, sheet distribution boards, double door protection class IP-42 suitable for mounting MCB/ MCCB, confirming to IS-13032, IS-8623, BS-5484 r of the under mention rating

SP&N12 ways. 05/SR/Bldg - 7 06/SR/Bldg - 8 07/SR/Bldg - 8

S&F MCB 10 KA confirming to IS-8828 : 1996, IEC-898 : 1995 rupturing capacity of the under mentioned type and rating :-

SP 5 to 32 amps. 05/SR/Bldg - 56 06/SR/Bldg - 48 07/SR/Bldg - 48

SPN 32 to 63 amps. 05/SR/Bldg - 7 06/SR/Bldg - 8 07/SR/Bldg - 8

Supply & Fix lamp holder insulated body with back plate for batton fitting including 9 watt LED bulb of Make : Bajaj/Wipro/Syska. 06/SR/Bldg - 24 07/SR/Bldg - 24

Supply and fix heavy duty exhaust fan 300 mm size 220/240 Volt steel body 1400 RPM with mounting ring and louvers, incl three core flexible PVC insulated multi stranded copper conductor cable of size 1.5 sqmm from ceiling rose/connector to fan. Make - Havells, Model No- Turbo force or eqvt of Bajaj/CG 06/SR/Bldg - 8 07/SR/Bldg - 8

Lakshmi Enterprises

M/S Mohan Lal Gupta

J.J.ENGINEERING

agrawal constructions