Loading
Loading…
Loading…
Tender Value
₹71.3 L
EMD Value
₹1.4 L
Closing Date
7 Aug 2026, 4:00 pm
Executive engineer TWID Jammu
Jammu
Drilling and Commissioning of One No. Irrigation Tube-well at Seed Multiplication Farm SMF Chakroi Agriculture Department in Jammu District Tube Well No. 5
2026_IFC_317616_1
e-NIT NO. 09 of 2026-27
Open Tender
Drilling Works
Item Rate
90 days
Jammu
Please refer tender documents
2 documents required · 2 mandatory
₹2,000
Executive Engineer TWID Jammu
₹1.4 L
Executive Engineer TWID Jammu
24 Jul 2026
24 Jul 2026
8 Aug 2026
24 Jul 2026
7 Aug 2026
24 Jul 2026
28 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Drilling of 530 mm dia bore hole with Reverse Rotary method using drill bits of various sizes starting with 675 mm dia. & completing preferably with 530 mm dia. The job includes cost of Lowering/extraction of drilling pipes, P.O.L, labour, machinery, material, tools & tackles & any other material required during drilling. (Complete Job) From ground level to 250 mts below ground level. | |||||
| 2Providing, designing, fitting and lowering of liner assembly comprising of 8 mm thick, 300 mm dia & 200 mm dia Electric Resistance Welded (ERW) M.S Pipe and M.S slotted pipe to required depth complete as directed. The job also include designing, arranging cutting and joining with welding (using electrode of approved quality) supported by 4 nos M.S strip of size 40mm x 6mm. The pipes are to be joined to the M.S slotted pipe in pieces or full lengths depending upon the water bearing strata as directed by Engineer-in-charge. Rate shall include the cost of Providing, fabrication, fitting & carriage of all pipes and accessories required to complete the job. | |||||
| 2.1 | 300 mm dia. 8mm thick M.S blind pipe. | - | Per Mtr | 10 | - |
| 2.2 | 200 mm dia. 8mm thick M.S blind pipe. | - | Per Mtr | 10 | - |
| 3Cost of slotting of M.S Casing pipe 200 mm dia 8 mm thick. | |||||
| 4Providing of gravel as per IS-4097 of 1967 with latest amendments for gravel packing of tube well shrouding in annular space between well and liner assembly after lowering of liner assembly and during development. The job includes cost of material, labour & carriage. (Complete Job). | |||||
| 5Washing and development of tube-well with air compressor of adequate capacity (not less than 250 CFM as per specification) till the availability of sand free clear water subject to minimum of 100 hrs of air compressor development. (Complete Job). | |||||
| 6Stabilization and yield testing of tube-well by way of over pumping using variable discharge V.T pump, till the yield & draw down of the tube well is ascertained & clear sand free water of optimum discharge at appropriate head is obtained.(Complete Job). | |||||
| 7Fabrication, providing / fitting of steel supporting structure for clamping of tube-well housing & gravel feed arrangement using 2 No. parallel ISMB-250 of 5 mts length each & M.S angle 40x40x6 mm with M.S plate of 10 mm thick with 2 No. cement concrete block of size 1.0 m x 1.0 m x 1.0 m, 1 No. each at both ends. The job includes cost of material, labour, carriage, tools & tackles charges. (Complete Job). | |||||
| 8Providing, Installation, testing & commissioning of submersible pump set having capacity of (12500 GPH x 50 mts) head coupled with 3 phase (20 H.P) 380 volts + 10%, 50 HZ + 3% A.C supply, copper wound squirrel cage induction submersible motor along with 100 mm dia C class G.I flanged column pipes, and other allied materials / equipments required during lowering of submersible pump set. The job also includes P/F of 40 Amp. Fully automatic unmanned star delta control panel cum auto starter of consisting of 3 pole contactor = 03 no. & 63 Amp 50 KA MCCB = 01 no. for motor back up & protection, time delay relay of 30 seconds with protection against phase reversal, phase imbalance, over loading, dry running low voltage below 350 V, high voltage above 450 V, single phase / phase reversal relay, over current / under current relay, over volt / under volt relay. The panel shall comprise of voltmeter with selector switch, Ampere meter with selector switch & current transformers of suitable capacity. The complete system should be enclosed in weatherproof painted M.S sheet box of suitable dimensions with height as per the requirement at site for proper fitment & having four supporting arms for grouting & strengthening. The job also includes P/L 35 mm2 3 1/2 core Al armoured cable (as per site condition) for making connection of control panel to electric transformer & 10 mm2 3 1/2 core submersible copper cable (as per site condition) for making connection of submersible motor to the control panel & other electric accessories required for commissioning of submersible pump set. The job also includes P/F of 100 mm dia C-class G.I delivery pipe supported with angle iron structure along with NRV & sluice valve & bends as per requirement at site. The job includes cost of material, labour, carriage, tools & tackles, complete job in all respects. | |||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.38 MB
BOQ_1041789.xls
BOQ • 0.26 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].