REPAIR PAINTING POLISHING OF STEEL AND WOODEN FURNITURE INCLUDING SOFA OF FD TRADE PATTERN AT VARIOUS LABS ESTABLISHMENTS OF BANGALORE AND MYSORE AREA UNDER GE I R D EAST BANGALORE

Amount

Almirah Medium steel with shelves (FD-67, 1032 & TP) M&L for scratching old paint from Almirah medium steel with shelves and making the almirah medium steel ready to make the surface for powder coat by completing seven tank process like cleaning, rinsing, phosphating, again rinsing, part drying, powder coating and curing. Painting of the Almirah Medium inner and outer side should be done duly powder coating in dual color as directed by Engineer-In-Charge and color shade as approved by GE or Engineer-in-Charge.

Almirah Large steel with shelves (FD-67, 1031, FD/E6/MAP/18 & TP) M&L for scratching old paint from Almirah large steel with shelves and making the almirah large steel ready to make the surface for powder coat by completing seven tank process like cleaning, rinsing, phosphating, again rinsing, part drying, powder coating and curing. Painting of the Almirah large inner and outer side should be done duly powder coating in dual color as directed by Engineer-In-Charge and color shade as approved by GE or Engineer-in-Charge.

M&L for removing existing u/s handles, lock and S&F new powder coated slimline concealed lock with duplicate key as approved by Engr-in-charge from Almirah large steel with shelves/Medium steel with shelves. If any requirement to change locking device and the same should be changed for making proper working of new concealed lock as approved.

Book Case steel (FD-90, 1028, 1047 & TP) M&L for scratching old paint from Book Case steel and making the Book Case steel ready to make the surface for powder coat by completing seven tank process like cleaning, rinsing, phosphating, again rinsing, part drying, powder coating and curing. Painting of the Book Case Steel inner and outer side should be done duly powder coating in dual color as directed by Engineer-In-Charge and color shade as approved by GE or Engineer-in-Charge.

Taking out U/S handle from Book case steel and S&F new C.P. steel handle as approved and matching with the existing shape & size.

Taking out U/S locks from Book case steel and S&F new six lever lock with duplicate key of approved quality all as directed by Engineer-in-Charge.

Filing Cabinet steel (FD-48, 67 & TP) M&L for scratching old paint from Filing Cabinet steel and making the Filing Cabinet steel ready to make the surface for powder coat by completing seven tank process like cleaning, rinsing, phosphating, again rinsing, part drying, powder coating and curing. Painting of the Filing Cabinet Steel inner and outer side should be done duly powder coating in dual color as directed by Engineer-In-Charge and color shade as approved by GE or Engineer-in-Charge.

Taking out U/S handle from Filing Cabinet steel and S&F new C.P. steel handle as approved and matching with the existing shape & size.

Taking out U/S lock from Filling Cabinet Steel and S&F new brass lock with duplicate key with complete Accessories as approved by Engr-in-charge including repair to complete locking device with rolling function smoothly all as directed by Engr-in-charge

Locker bed side steel (FD-257 & 1029) M&L for scratching old paint from Locker Bed side steel and making the same ready to make the surface for powder coat by completing seven tank process like cleaning, rinsing, phosphating, again rinsing, part drying, powder coating and curing. Painting of the Locker bed side Steel inner and outer side should be done duly powder coating in dual color as directed by Engineer-In-Charge and color shade as approved by GE or Engineer-in-Charge.

Chair Conference/Seminar TP Taking out U/S tapestry cloth from seat & back of Chair Conference/Seminar and S&F new high quality tapestry cloth not less than 350 GSM of approved quality & shade including replacement of foam cushion and plywood etc. All as directed by Engr-in-chrarge.

Taking out u/s revolving base MS/PVC from chair Conference/seminar and S&F new revolving base MS/PVC with wheel matching with the existing shape and size as approved by Engr-in-charge.

Taking out U/S caster wheel from any type of chair revolving and S&F new caster wheel as per trade pattern matching with the existing shape & size.as approved by Engr-in-charge

Taking out of Hydrualic Assembly/Gas lift From Chair revolving Low back/Med back and S&F new Hydrualic assembly/Gas lift as per trade pattern matching with the existing shape and size as directed by Engr-in-charge.

Taking out U/S hand rest from Chair Conference/assembly and S&F new hand rest as per trade pattern matching with the existing hand rest, wherever any welding work requied should be carried out as directed by Engr-in-charge

Chair Visitor TP Taking out U/S tapestry cloth from seat & back of Chair Visitor Steel and S&F new high quality tapestry cloth not less than 350 GSM of approved quality & shade including replacement of foam cushion and plywood etc. All as directed by Engr-in-chrarge.

Taking out U/S hand rest from Chair visitor and S&F new hand rest of different type as per trade pattern matching with the existing hand rest as approved by Engr-in-charge

Chair Visitor wooden TP Taking out Unserviceable tapestry cloth from seat & back of chair visitor wooden and Supply and fix new high quality tapestry cloth not less than 350 GSM of approved quality & shade including replacement of foam cushion and plywood etc.all as directed by GE/Engr-in-charge

M&L for scratching existing polish filling the cracks making the surface smooth with sand emery paper and M&L for polishing the Chair Visitor wooden complete with melamyne polish of two coat to give glossy finish as directed by Engr-in-Charge.

Sofa set five seater (FD-281, 373 & TP) Taking out U/S foam cushion seat and back from sofa set to seat five and supply new foam cushion seat and back 40 density size 21"x22"x4" thick (10 Nos) duly covered with high quality tapestry cloth not less than 350 GSM as approved by GE.

Taking out u/s wooden arms from sofa single chair/three seater and S&F new wooden arms made out of first class teak wood matching with existing shape and size as directed by Engr-in-charge.

M&L for scratching existing polish, filling the cracks properly and making the surface smooth with sand emery paper and M&L for polishing the Sofa five seater set complete with melamyne polish of two coat to give glossy finish as directed by Engr-in-charge.

Bed Hard with Ply Top (FD 246) Taking out U/S ply wood from the Bed Hard with ply top and S&F of new Plywood commercial 12mm thick ISI Marked complete all as specified and as directed by Engr-in-Charge.

Taking out U/S 40x60mm Stiffners from Bed Hard with ply top and S&F of new stiffners made out of seasoned hard wood of size complete all as specifided and shown in drg

Taking out U/S Supporting clamps from Bed Hard with ply Top and S&F of new MS clamps made out of 6mmx15mm thick MS flat iron complete all as specified and shown in drg

Scratching existing polish, filling the cracks and making the surface smoooth with sand emery paper and M&L for polishing the Bed Hard with ply top with melamyne polish of two coats for all the wooden parts exposed to vision to get glossy finish complete all as directed by Engr-in-charge

Table 900x600x760mm with/without drawer (FD 223, 283 & 284) Taking out U/S top from table 900x600mm and S&F new top made of pre laminated MDF board exterior grade 18mm thick as per shade approved and duly provided with 4mm thick teak wood beading all around the top complete all as directed by Engineer-in-Charge.

Scratching existing polish, filling the cracks and making the surface smooth with sand emery paper and M&L for polishing the table 900x600mm with/without drawer with melamyne polish of two coats for all the wooden parts exposed to vision to glossy finish complete all as directed by Engr-in-charge

Table officer/Executive TP Taking out U/S Table top from Table Executive and S&F new top of existing size made out of pre laminated MDF board exterior grade 25mm thick as per existing shade and duly provided with PVC edge binding all around the top all as directed by Engineer-in-Charge.

Taking out U/S locks from the drawers of Table officer/executive make Godrej/Fetherlite or any other make any shape and any size and S&F new lock as per trade pattren matching with existing shape and size approved quality. All as directed by Engr-in-charge.

Taking out U/S channel from the drawers of Table officer/executive make Godrej/Fetherlite or any other make any shape and any size and S&F new channel as per trade pattren matching with existing shape and size approved quality. All as directed by Engr-in-charge.

Taking out U/S locks from the drawers of Mobile Pedestal make Godrej/Fetherlite or any other make any shape and any size and S&F new lock as per trade pattren matching with existing shape and size approved quality. All as directed by Engr-in-charge.

Taking out U/S revolving wheel from the Mobile Pedestal of make Godrej/Fetherlite or any other make, any shape and any size and S&F new channel as per trade pattren matching with existing shape and size approved quality. All as directed by Engr-in-charge.

Table Centre (FD-235 & 274) Taking out U/S top from table centre and S&F new top made of pre-laminated MDF board of exterior grade 18mm thick as per shade approved and duly covered with 4mm thick teak wood beading all around top all as directed by Engineer-in-Charge.

Taking out U/S leg from table centre and S&F new leg made of seasoned teak wood including rubber shoe at the bottom of leg matching with the existing shape & size complete all as directed by Engineer-in-Charge.

M&L for scratching existing polish filling the cracks making the surface smooth with sand emery paper and M&L for polishing the table centre with melamyne poliosh of two coats complete to get glossy finish as directed by the Engr-in-charge.

Teapoy Wooden (FD 232 & 278) Taking out U/S top from teapoy wooden and S&F new top made of pre-laminated MDF board exterior grade 18mm thick as per shade approved and duly covered with 4mm thick teak wood beading all around top complete all as directed by Engineer-in-Charge.

Taking out U/S leg from teapoy wooden and S&F new leg made of seasoned teak wood including rubber shoe at the bottom of leg matching with the exesting shape & size complete all as directed by Engineer-in-Charge.

M&L for scratching existing polish filling the cracks making the surface smooth with sand emery paper and M&L for polishing the teapoy wooden with melamyne polish of two coats complete to get glossy finish as directed by the Engr-in-charge

Table Peg (FD-236 & 277) Taking out U/S top from table peg and S&F new top made of pre laminated MDF board exterior grade 18mm thick as per shade approved and duly coverd with 4mm thick teak wood beading all around the top complete all as directed by Engineer-in-Charge.

Taking out leg from table peg and S&F new leg made of seasoned teak wood including rubber shoe at the bottom of leg matching with the existing shape & size complete all as directed by Engineer-in-Charge.

M&L for scratching existing polish filling the cracks making the surface smooth with sand emery paper and M&L for polishing the table peg with melamyne polish of two coats complete to get glossy finish as directed by Engr-in-charge.

Table Dining 6 pers (FD-269 & 273) Taking out U/S top from table dining 6 pers S&F new top made of pre-laminated MDF board exterior grade 18mm thick as per shade approved and duly covered with 4mm thick teak wood beading all around the top complete all as directed by Engineer-in-charge.

Taking out U/S leg from table dining 6 pers and S&F new leg made of seasoned teak wood including rubber shoe at the bottom of leg matching with the existing shape & size complete all as directed by Engineer-in-Charge.

M&L for scratching existing polish filling the cracks making the surface smooth with sand emery paper and M&L for polishing the table dining 6 pers with melamyne polish of two coats complete to get glossy finish as directed by Engr-in-Charge.

Table Dinining 4 Person (FD-273) Taking out U/S top from table dinining 4 Person and S&F new top made of pre laminated MDF board exterior grade 18 mm thick as per shade approved and duly covered with 4mm thick teak wood beading all around the top all as directed by Engr-in-Charge.

Taking out U/S leg from table dinining 4 Person and S&F new leg made of seasoned teak wood including rubber shoe at the bottom of leg matching with the existing shape & size.

M&L for scratching existing polish filling the cracks making the surface smooth with sand emery paper and M&L for polishing the table dinining 4 Person with melamyne polish of two coats to get glossy finish as directed by Engr-in-charge.

Hat Stand with Mirror (FD-361,362) Taking out u/s looking mirror from hat stand with mirror and S&F new looking mirror 5.5mm thick of size 300x440mm, free from distortion and other defect matching with existing shape and size all as directed by Engr-in-Charge.

Taking out u/s pegs hooks from hat stand with mirror and S&F new copper oxidesd steel peg hooks matching with the existing shape and size all as directed by Engr-in-Charge.

M&L for scratching existing polish filling the cracks making the surface smooth with sand emery paper and M&L for polishing the hat stand with mirror with melamyne polish of two coats to get glossy finish all as directed by Engr-in-Charge.

Table Writing (FD-249 & 275) Taking out U/S top from table writing and S&F new top made pre laminated MDF board exterior grade 18 mm thick as per shade approved and duly covered with 4mm thick teak wood beading all around the top complete all as directed by Engr-in-Charge.

Taking out U/S leg from table writing and S&F new leg made of seasoned teak wood matching with the existing shape & size complete all as directed by Engr-in-Charge.

M&L for scratching existing polish filling the cracks making the surface smooth with sand emery paper and M&L for polishing the table writing with melamyne polish of two coats to get glossy finish complete all as directed by Engr-in-charge.

Table dressing gents with mirror (FD-379 & FD/E6/MAP/16) Taking out U/s looking mirror from table dressing gents and S&F new looking mirror 5.5mm thick of existing size free from distortion and other defect duly framed with backing plywood teak wood beading & vertical support etc. all as shown in drg.

M&L for scratching existing polish filling the cracks making the surface smooth with sand emery paper and M&L for polishing the table dressing gents with melamyne polish of two coats to get glossy finish complete as directed by engr-in-charge.

Chair Dining (FD-228, 279 & FD/MAP-II/05) Taking out U/S rear leg from chair dining and S&F new rear leg made of seasoned teak wood matching with the existing shape & size complete all as directed by Engr-in-Charge.

Taking out U/S front leg from chair dining and S&F new front leg made of seasoned teak wood matching with the existing shape & size.

Taking out U/S front/back/side rail from chair dining and S&F new front/back/side rael matching with the existing shape & size.

Taking out U/S Stiffenerrs from chair dining and S&F new stiffners made of seasoned teak wood matching with the existing shape & size.

M&L for scratching existing polish filling the cracks making the surface smooth with sand emery paper and M&L for polishing the chair dining complete with melamyne polish of two coats to get glossy finish complete all as directed by Engr-in-charge.

Taking Out U/s PVC seat from dining and S&F New PVC seat of 4 mm thick matching with the existing shape and size

Chair Easy (FD-229) Taking out U/S rear leg from chair easy and S&F new rear leg made of seasoned teak wood matching with the existing shape & size complete all as specified and shown in drg.

Taking out U/S front leg from chair easy and S&F new front leg made of seasoned teak wood matching with the existing shape & size.

Taking out U/S back rail upper side from chair easy and S&F new back rail upper side made of seasoned teak wood. All as shown in drg.

Taking out U/S back rail lower side from chair easy and S&F new back rail upper side made of seasoned teak wood. All as shown in drg.

Taking out U/S side rail from chair easy and S&F new side rail made of seasoned teak wood .all as shown in drg.

Taking out U/S hand rest from chair easy and S&F new hand rest made of seasoned teak wood matching with the existing shape & size.

M&L for scratching existing polish filling the cracks making the surface smooth with sand emery paper and M&L for polishing the chair easy complete with melamyne poliosh of two coats to get glossy finish complete all as directed by Engr-in-charge

Taking out U/S cane from chairs or any other article of furniture then cleaning the holes for re canning and supply & re-canning with new half round cane 2 to 2.5mm wide superior quality ISI Marked color as approved by GE/Engr-in-charge vewing shall be as per godrej pattern conmplete All as specifieid and directed by engr-in-charge

Taking out U/S cane from chair varandah & de-rusting rubbing old steel srface with sand paper and painting the steel frame with synthetic enamel white paint, supply & re-canning with new cane 4mm wide as per godrej pattern including replacement of rubber shoe at the bottom of leg All as specified and directed by the engr-in-charge.

Sofa set Three seater (TP) M&L For removing old US letherite/fabric tapestry from the sofa set three seater and supply and fixing new leathrite/fabric tapestry as per shade approved by GE/Engr-in-charge including replacement of u/s foam cushion of any size and shape, 3 Nos each seat and three Nos each set for back without changing of existing shape and size as directed by GE/Engr-in-charge.

Sofa two seater (TP) M&L For removing old US letherite/fabric tapestry from the sofa two seater and supply and fixing new leathrite/fabric tapestry as per shade approved by GE/Engr-in-charge including replacement of u/s foam cushion of any size and shape two Nos each set for seat and two Nos each set for back without changing of existing shape and size as directed by GE/Engr-in-charge.

Sofa single seater (TP) M&L for removing old US letherite/fabric tapestry from the sofa single seater and supply and fixing new leathrite/fabric tapestry as per shade approved by GE/Engr-in-charge including replacement of u/s foam cushion of any size and shape one Nos each for seat and one Nos each for back without changing of existing shape and size as directed by GE/Engr-in-charge.

PRIYADARSHINI CONSTRUCTIONS

Vivek Engineers

SAPTHAGIRI CONSTRUCTIONS

JM Engineering

SREE GOWRISHANKAR ENTERPRISES

Annu Enterprises