Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹5.5 L
Closing Date
16 Sept 2026, 5:00 pm
Bangalore Electricity Supply Company Limited
Kavitha R
Construction of 1 block of 8 tenaments LM quarters at BESCOM premises Malur, KGF Division duly dismantling the existing old deteriorate building.
BESCOM/2026-27/BD/WORK_INDENT1157
BESCOM/2026-27/BD/WORK_INDENT1157
Open
Buildings
Two Tender Document System(Two Cover)
BESCOM Corporate Office Civil Section Bengaluru
10 documents required · 10 mandatory
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
The bidders shall upload the work done certificate for having executed One building work of value not less than Rs. 182.20 lakhs and completed satisfactorily as a prime contractor within stipulated time period in the past 5 years (i.e., F/Y 2021-22 to 2025-26). Work done certificate shall be duly signed by the officer not below the rank of Executive Engineer or equivalent.(Note: Work done amount will be updated to the FY 2026-27 in which the tenders are invited. The value of the completed works will be given a weight of 10% per year to bring them to the price level of the FY 2026-27 in which the tenders are invited)
The bidders shall upload the work done certificate of for minimum quantities of work executed in any one year for following quantities (In a continuous period of 12 months from April to March) in the last 5 years (i.e. FY 2021-22 to 2025-26) the certificate shall be issued by the officer not below the rank of Executive Engineer or equivalent.I. PCC or RCC : 765.00 Cum, II.TMT steel reinforcement : 69.00 Tonnes, III.Burnt brick masonry or Solid block masonry : 302.00Cum or 1510.00 Sqm, IV. Vitrified or Ceramic or Granite flooring : 1310.00 Sqm
The bidders shall upload a valid registered KPWD Civil contractor Licence of Class I and Class II.
The banker certificate pertaining to Liquid Assets for availability of fund requirement for the work not less Rs.87.46 Lakhs issued by Nationalised / Scheduled Bank for the subject work addressed to General Manager (Civil), Corporate office, BESCOM after 31.07.2026 in the enclosed format
The bidders shall achieved turnover for an amount not less than Rs. 583.04 lakhs achieved in any two financial years in the past 5 years (i.e. F/Y 2021-22 to 2025-26) (in all classes of civil engineering construction works only). The Turnover certificate along with Balance sheet and P & L statement of past 5 years for the Civil Engineering works only (i.e. F/Y 2021-22 to 2025-26) issued from a Registered Chartered Accountant (Registered Chartered Accountant PIN and UDIN number must be mentioned failing which bid will be considered as Non-Responsive) should be uploaded. (Note: The turnover amount will be updated to the FY 2026-27 in which the tenders are invited. The Financial turnover of previous years will be given a weightage of 10% per year to bring them to the price level of the FY 2026-27 in which the tenders are invited)
The bidder/tenderer or his identified Sub contractor should upload required valid electrical licence along with consent / undertaking letter for executing building electrification works and should have executed similar electrical works totalling for Rs.10.60 lakhs in any one year in the last 5 years, (i.e. F/Y 2021-22 to 2025-26) signed by the officer not below the rank of Executive Engineer or equivalent for Electrical works
The bidder/tenderer or his identified Sub contractor should have executed similar Water supply / sanitary engineering works /PHE works totalling for Rs. 5.40 lakhs in any one year in the last 5 years, (i.e. F/Y 2021-22 to 2025-26) signed by the officer not below the rank of Executive Engineer or equivalent for Water supply / sanitary engineering works /PHE works
Bidders who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The bidder shall upload his tender capacity calculation in his letter head along with date and signature with Seal as per the formula Assessed available tender capacity (AxNx1.50-B) Where, A Maximum value of civil engineering works executed in any one year during the last five years updated to 2026-27 price level taking into account the completed as well as works in progress. N Number of years prescribed for completion of the works for which tenders are invited. B Value, at 2026-27 price level, of existing commitments and ongoing works to be completed during the next 12 Months.
Any other document as per NIT and KW4
Bidder should be in existence as any of the following: Company/LLP/Parternership firm/Sole Proprietorship Concern details as per NIT and KW4
Bidder shall upload the self-declaration affidavit as per the enclosed format on the stamp paper of value not less than Rs. 500/- duly notarized stating that a.Not made any misleading or false representations in the forms, statements and attachments submitted in proof of the qualification requirements.b.Not made any Record of poor performance such as abandoning the works, not properly completing the contract, inordinate delays in completion or financial failures etc.c.Not participated in the previous Tender for the same work and had quoted unreasonably high tender prices and could not furnish rational justification.d.No Litigation History or arbitration arising out of contracts completed or under execution by it over the preceding five years
₹5,000
₹5.5 L
4 Sept 2026
17 Aug 2026
17 Sept 2026
7 Sept 2026
28 Aug 2026
Construction of 1 block of 8 tenaments LM quarters at BESCOM premises Malur, KGF Division duly dismantling the existing old deteriorate building.
Clearing and grubbing road land including uprooting rankvegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of uns...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, baseme...
Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers Nost exceeding 20cm in depth, consolidating Nos deposited layer by ramming and ...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers Nost exceeding 20cm in depth,consolidating Nos deposited layer by ra...
Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour wit...
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggre...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
do columns upto plinth (Including formwork charges).
do Plinth Beam (Including formwork charges).
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
do columns First Floor (Including formwork charges)
do columns Second Floor (Including formwork charges).
do columns Terrace Floor (Including formwork charges).
do beams Ground Floor (Including formwork charges)
do beams First Floor (Including formwork charges).
do beams Second Floor (Including formwork charges).
do beams Terrace Floor (Including formwork charges)
do slab Ground Floor (Including formwork charges).
do slab First Floor (Including formwork charges)
do slab Second Floor (Including formwork charges).
do slab Terrace Floor (Including formwork charges)
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Do-TMT reinforcement First Floor
Do-TMT reinforcement Second Floor
Do-TMT reinforcement Terrace Floor
Providing brickwork with common burnt clay Nosn Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement: 4 coarse sand) incl...
do- First Floor Brick work
do-Second Floor Brick work
do-Terrace Floor Brick work
Providing 12 mm cement plaster (ceiling surface) with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removi...
do- First Floor ceiling Plastering
do-Second Floor ceiling Plastering
do-Terrace Floor ceiling Plastering
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corne...
do- First Floor Internal surface Plastering
do-Second Floor Internal surface Plastering
do-Terrace Floor Internal surface Plastering
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
do- First Floor putty
do-Second Floor putty
do-Terrace Floor putty
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less tha...
do- First Floor primer
do-Second Floor primer
do-Terrace Floor primer
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional c...
do- First Floor acrylic emulsion paint
do-Second Floor acrylic emulsion paint
do-Terrace Floor acrylic emulsion paint
Providing 20 mm cement plaster (external surface) of mix :1:4 (1 cement: 6 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing s...
do- First Floor
do-Second Floor
do-Terrace Floor
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 Smt over and including priming coat of exterior primer applied @ 2.20 Kgs/10 Smt) with pa...
do- First Floor
do-Second Floor
do-Terrace Floor
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in al...
do-Second Floor vitrified floor
Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm...
do- Second Floor
Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement con...
do- First Floor
do- Second Floor
Providing full Nosing for 20mm thick granite slab using required machinery including cost and conveyance of all materials, labour for all items of work, HOM of equipment etc., complete as per specific...
Providing and fixing 1st quality ceramic glazed wall tiles conformingto IS: 15622 (thickness to be specified by the manufacturer), ofapproved make, in all colours, shades except burgundy, bottle green...
do- Second Floor ceramic glazed wall tiles
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...
do- Second Floor Ceramic glazed floor tile
Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm Nosminal gauge) on terraced roof or sunken slabs,laid to slope compacting, including cost of materials, labour, cur...
Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm Nosmi...
Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...
Providing and laying water proofing treatment to the Water tanks & Liquid Retaining structures with two component acrylic polymer modified cementitious waterproofing membrane with minimum elongation o...
Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves ( excluding cost of cement concrete and si...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...
Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is...
Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.
Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :250x10mm
Providing and fixing bright finished brass butt hinges with necessary screws etc. complete 125x85x5.5 mm (heavy type
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...
Providing & fixing Factory made single extruded Wood Polymer Composite (WPC) solid door/window, clerestory windows & frames /chowkhat of frame size 65 x 100mm
Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...
Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...
Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at6PHR with TPE (Thermo Plastic Elastomer) and lead fr...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...
Providing and fixing 6mm Clear/opal white/solar bronze/blue/green tinted Multi wall poly carbonate sheet for Tubular structure. The work including cost of all materials, labour charges, and hire charg...
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 m...
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...
WARDROBE: Providing and supplying cupboard shutter with 19mm thick one side Architect recommended decorative laminate (1mm thick) and other side balancing lamination(preferably white) on factory press...
Providing and supplying 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand oxes,shelves,racks,almirah,cupboard and drawer etc. including nec...
Labour & installation charges for BWP ply:BWR ply:HDHMR: MDF & Particle board work of any thickness applicable for all types of work
Providing and fixing stainless steel 304 grade fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in charge. 200mm length
Providing and fixing Stainless Steel 304 grade soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including maki...
Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc complete as per direction of Engineer-in-charge
Providing and fixing stainless steel 304 grade soft closing hinges with two hole fixing & 165 degrees turning option for wardrobe doors , kitchen & other utilities of reputed make with screws etc comp...
Providing and laying (Kitchen slab) flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectura...
Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and...
Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in Granite, including necessary holes for pillar taps etc. in...
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per iS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making go...
ROADWORKPlant Mix Method Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform laye...
Construction of un-reinforced plain cement concrete pavement using RMC M-30 grade with OPC @ 270 Kgs/m3 and GGBS@ 90 Kgs/m3 (75:25 proportion) as per approved mix design procedure and thickness as per...
Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge..600 x 300 x 1...
Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength Nost less than M-25, of size 1000 x450x50 mm, reinforced with 8 mm dia four Nos longitudinal & 9 Nos ...
Street light Pole :- Fabricating, supplying and erection of ... ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door...
PLUMBING AND SANITARY WORK
Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per ins...
Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 Nos set of Phase indicating lamps with SFU of suitable rating 1 Nos, Analog Ammeter, 1 Nos Anal...
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
PVC pipes 110mm dia., 6 Kgs/sqcm & class
PVC pipes 75mm dia., 6 Kgs/sqcm & class 3
Supplying of special moulded variety PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments to walk site etc. complete.140mm dia PVC couplers
110 mm dia PVC couplers
75 mm dia PVC couplers
Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 140 mm dia PVC Elbows
110 mm dia PVC Elbow
75 mm dia PVC Elbows
Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 140 mm dia PVC Tee
110 mm dia PVC Tee
75 mm dia PVC Tee
Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 140 mm dia PVC BEND
110 mm dia PVC BEND
75 mm dia PVC BEND
Supply and delivery at site special moulded variety PVC reducer as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 140 mm dia PVC BEND
110 mm dia PVC BEND
75 mm dia PVC BEND
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...
32 mm Nosminal dia Pipes
25 mm Nosminal dia Pipes
20 mm Nosminal dia Pipes
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :25 mm Nosminal bore
35 mm Nosminal bore
Providing and fixing gun metal Nosn- return valve of approved quality(screwed end) : 25 mm Nosminal bore
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the wa...
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.
Providing and fixing CP Brass 15 mm Nosminal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.
Providing and fixing 100 mm sand cast Iron grating for gully trap.
Providing and fixing brass bib cock of approved quality :20 mm Nosminal bore
Providing and fixing brass stop cock of approved quality :20 mm Nosminal bore (KPWD SR 2023-24 / VOL2/ Item Nos:13.3.2/Pg.Nos:117)
600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing Nost less than 190 g.
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...
Constructing brick masonry chamber of internal dimension 600x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Providing and fixing kitchen sink including making all connections including cost of fittings with White glazed fire clay sink of size 600x450x250 mm
Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete
ELECTRICAL WORK
Concealed Conduit System -Supplying heavy gauge PVC conduit pipe 19/20 mm dia 2 mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive p...
Concealed Conduit System -Supplying heavy gauge PVC conduit pipe 25 mm dia 2 mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and runn...
Supplying heavy gauge PVC Conduit Pipe 19/20mm dia 2 mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J ho...
Supplying heavy gauge PVC Conduit Pipe 25mm dia 2 mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks...
Supplying and fixing of PVC casing and capping on the wall or ceilling using necessary materials like bends,junction box , elbows,screws at an interval of 300mm etc as required. 20mm size
Supplying and fixing of PVC casing and capping on the wall or ceilling using necessary materials like bends,junction box , elbows,screws at an interval of 300mm etc as required. 25mm size
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase& Neutral) & 1x1.0 Sqmm (Earth wire) FRLS multistrand PVC insulated copper wire (confirming to...
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase& Neutral) & 1x1.0 Sqmm (Earth wire) FRLS multistrand PVC insulated copper wire (confirming to...
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase& Neutral) & 1x1.0 Sqmm (Earth wire) FRLS multistrand PVC insulated copper wire (confirming to...
supplying and flush mounting powder coated /galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in brick/stone/c.c wall -3...
supplying and flush mounting powder coated /galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in brick/stone/c.c wall- 4...
supplying and flush mounting powder coated /galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in brick/stone/c.c wall- 6...
supplying and flush mounting powder coated /galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in brick/stone/c.c wall- 8...
supplying and flush mounting powder coated /galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in brick/stone/c.c wall- 1...
Supplying and fixing superior quality switch mounting poly carbonate plate with necessary supporting back plate with required Nos of machine tools, bolts, nuts etc., complete on the existing metal/PVC...
Supplying and fixing superior quality switch mounting poly carbonate plate with necessary supporting back plate with required Nos of machine tools, bolts, nuts etc., complete on the existing metal/PVC...
Supplying and fixing superior quality switch mounting poly carbonate plate with necessary supporting back plate with required Nos of machine tools, bolts, nuts etc., complete on the existing metal/PVC...
Supplying and fixing superior quality switch mounting poly carbonate plate with necessary supporting back plate with required Nos of machine tools, bolts, nuts etc., complete on the existing metal/PVC...
Supplying and fixing superior quality switch mounting poly carbonate plate with necessary supporting back plate with required Nos of machine tools, bolts, nuts etc., complete on the existing metal/PVC...
Supplying and fixing superior quality of modular switch & connected acceessories on existing modular switch plate as per IS-3854 and IS 1293. 6Amps one way Switch
Supplying and fixing superior quality of modular switch & connected acceessories on existing modular switch plate as per IS-3854 and IS 1293.- 6Amps two way Switch.
Supplying and fixing superior quality of modular switch & connected acceessories on existing modular switch plate as per IS-3854 and IS 1293.- 6Amps 3way socket
Supplying and fixing superior quality of modular switch & connected acceessories on existing modular switch plate as per IS-3854 and IS 1293. -Stepped Fan Regulator
Supplying and fixing superior quality of modular switch & connected acceessories on existing modular switch plate as per IS-3854 and IS 1293. - 6/16Amps One way switch
Supplying and fixing superior quality of modular switch & connected acceessories on existing modular switch plate as per IS-3854 and IS 1293. - 6/16Amps universal socket.
Supplying and fixing superior quality of modular switch & connected acceessories on existing modular switch plate as per IS-3854 and IS 1293. - 6Amps Bell Push
Supplying and fixing one of 230 V Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote
Supplying and fixing superior quality of modular switch & connected acceessories on existing modular switch plate as per IS-3854 and IS 1293. TV/Telephone socket.
Supplying and drawing PVC flexible one pair telephone unarmoured tinned Copper cable. 2 pair
Supplying and drawing PVC insulated gas injected physical foam jellyflooded co-axial TV cable.RG-6.3.
Supplying and fixing superior quality of modular switch & connected acceessories on existing modular switch plate as per IS-3854 and IS 1293. TV/ socket.
Wiring for lighting /Power Circuit using one FRLS/PVC insulated 1100v Grade , multistand Copper with Low conductor resistance single core wire in open or concealed system of wiring with specified IS 6...
Wiring for lighting /Power Circuit using one FRLS/PVC insulated 1100v Grade , multistand Copper with Low conductor resistance single core wire in open or concealed system of wiring with specified IS 6...
Wiring for lighting /Power Circuit using one FRLS/PVC insulated 1100v Grade , multistand Copper with Low conductor resistance single core wire in open or concealed system of wiring with specified IS 6...
Wiring for lighting /Power Circuit using one FRLS/PVC insulated 1100v Grade , multistand Copper with Low conductor resistance single core wire in open or concealed system of wiring with specified IS 6...
Wiring for lighting /Power Circuit using one FRLS/PVC insulated 1100v Grade , multistand Copper with Low conductor resistance single core wire in open or concealed system of wiring with specified IS 6...
Supplying and fixing of .4' feet - PVC Batten with integrated LED tube 20/22.W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI ...
Supplying and fixing of .2' feet - PVC Batten with integrated LED tube9/10.W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power ...
Supplying & fixing of retrofit type - LED bulb .12W,65000k with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per W, life 25000 burning hours ...
Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/19 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated power upto...
Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessa...
Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.-12" Sweep (300mm)
Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, cei...
Supplying and fixing of round or oblong type bulk head fitting with glass cover and 12/15 watts LED lamp
Supplying and fixing of Metal Socket set of 2pole and earth plugs and socket for incorporating SP and TP MCB (Without MCB). The entire plug and socket shall be mounted in a thermoplastic / powder coa...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
CONSUMER CONTROL TPN DB
Supplying and fixing regular MCB distribution boards on wall/Wood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable ...
Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/panel board.( 63A 4 pole ).
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
6-32 Amps Single pole MCB for Outgoing Circuits .(25A-2Nos for AC + 20A - 2Nos for Geyser + 16A -5Nos for 15A power socket + 6A-10A -9 Nos for lighting circuit.)
Supply and Installation / Fixing / Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, d...
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440v A.C. 50 Hz 12/24v D.C
Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 A three phase 4 wire whole current class-1 Accuracy Energy Meter.
Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.-63A
Supplying of Switch disconnector fuse unit (TPN) HRC type (but without HRC fuses). With AC-23A duty and as per IS- 13947. - 63A
Supplying and fixing HRC fuse units base on existing switch / panel board.
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr lon...
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required.-25x3mm GI strip
Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc. 8 SWG GI Wire.
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.- 35 Sqmm
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.- 50 Sqmm
Supplying and fixing of DANGER, Nos-ADMISSION & Nos SMOKING board made out of MS sheet metal with two coats of Nosn corrosive enameled paint
Supplying and fixing of class A (medium duty) GI pipe of wall thickness Nost less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV.- 40mm
EB Incomer Cable -3.5C X 70 sq.mm XLPE Ar.Al.Cable Supply and Laying ( Cable QTY Approxmate only )
Supply and End termination of Above Cable Gland with 70sq.mm including required Alumminum Suitable legs and tape etc
EB Incomer Cable -3.5C X 25 sq.mm XLPE Ar.Al.Cable Supply and Laying ( Cable QTY Approxmate only )
Supply and End termination of Above Cable Gland with 25 sq.mm including required Alumminum Suitable legs and tape etc
COMPOUND WALL: Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800Kgs/m3 and minimum compressive strength of 4.00 N/mm2 co...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...
Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 Kgs/10 Smt) to give an even shade after thoroughly brooming the surface to remove all dirt, dust,...
Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in require...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Banker Certificate Format.pdf
Others - Banker Certificate format • 0.02 MB
KW4 Malur Qtrs.docx
Tender Document • 0.55 MB
NIT malur Qrtrs.docx
Instructions to Tenderers • 0.05 MB
Self declaration format.docx
Others - Self Declaration Format • 0.01 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .