Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.7 LAccepted-AOC | ₹17.7 L | L1 | Accepted-AOC L1 |
| Sl No | Description | Qty | Unit | M/S MANZOOR HUSSAIN L1 |
|---|---|---|---|---|
| 1.00 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built upstandard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at unctions, at top, bottom and sides with required PVC neoprenefelt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steelscrews, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing andpanelling to be paid for separately): For Fixed portion.Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade
AC 15 | 2,479.49 | Kg | 10,66,178.98 ₹12,58,091.2 Lowest |
| 2.00 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDMrubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-incharge. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) | 191.36 | Sqm | 2,29,630.8 ₹2,70,964.34 Lowest |
| 3.00 | Providing and fixing 4mm Thick ACP (Aluminium Composite Panel) of approved make or brand, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer in-charge. 4mm Thick ACP (Aluminium Composite Panel) | 47.86 | Sqm. | 76,576 ₹90,359.68 Lowest |
| 4.00 | Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins,rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet tabiliser in resin system under approximately 2400 psi and hotcured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and S12866.Thesheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2 mm thick flata | 94 | Sqm | 1,50,400 ₹1,77,472 Lowest |
| 5.00 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS:1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 250x10 mm | 32 | Nos | 3,840 ₹4,531.2 Lowest |
| 6.00 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 100 mm | 32 | Nos | 4,800 ₹5,664 Lowest |
| 7.00 | Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete.100X58X1.90 mm | 48 | Nos | 2,400 ₹2,832 Lowest |
| 8.00 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete: 250x16 mm | 8 | Nos | 800 ₹944 Lowest |
Tender Value
Refer Docs
EMD Value
₹32,000
Closing Date
2 Dec 2023, 3:00 pmClosed
DGM(C) CnP NBPS ALCHI LEH LADAKH
NBPS ALCHI LEH LADAKH
For construction work of Solarium to cover water tanks on roofs of field hostel of residential colony at Nimoo Bazgo Power Station, Alchi
2023_NHPC_777191_1
NBPS/CnP/2023-24/W-849/202
Open Tender
Miscellaneous Works
Works
30 days
NBPS ALCHI LEH LADAKH
Please refer Tender documents.
2 documents required · 2 mandatory
₹590
Yes
NHPC LIMITED
₹32,000
Yes
31 Jul 2026
20 Oct 2023
8 Dec 2023
20 Oct 2023
2 Dec 2023
20 Oct 2023
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built upstandard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at unctions, at top, bottom and sides with required PVC neoprenefelt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steelscrews, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing andpanelling to be paid for separately): For Fixed portion.Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDMrubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-incharge. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)
Providing and fixing 4mm Thick ACP (Aluminium Composite Panel) of approved make or brand, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer in-charge. 4mm Thick ACP (Aluminium Composite Panel)
Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins,rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet tabiliser in resin system under approximately 2400 psi and hotcured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and S12866.Thesheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2 mm thick flata
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS:1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 250x10 mm
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 100 mm
Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete.100X58X1.90 mm
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete: 250x16 mm
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .