SPL REPAIRS TO BUILDING NO P40 QTR 01 TO 04 OR MD ACCN OF FD REGT AND PROVN OF TOILET NEAR KALIMATA MANDIR AT 1 FOD AND ADDN ALTN TO SEWAGE LINE AND SEPTIC TANK OF GD POST AT DEPOT AREA OF 1 FOD UNDER GE SOUTH UDHAMPUR

Amount

Surface excavation not exc 30 cm deep and averaging 15cm and getting in any type of soil complete all as specified and directed.

Excavation over areas n. exc. 1.5, deep and getting out in any type of soil complete all as specified and directed.

Excavation over areas exc. 1.5,but nexc 3m deep and getting out in any type of soil complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, & n exc 10 Sqm on plan and n exc 1.5 m in depth and getting out in any type of soil, complete all as specified and directed.

Returning, filling incl spreading leveling watering and well ramming in layers not exceeding 25mm in any type of soil complete all as specified and directed.

Removing excavated material (soils) not exceeding 50 m depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Removing excavated material (soils) exceeding 250 m but n.exc. 500m and depositing where directed at a level not exceeding 1.5m above the starting point all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stoneswork and precast concrete articles complete all as specified and directed

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level)

Demolition of cement concrete (reinforced) in roofs, floors (other than ground floors), beams, staircases, water tanks, landing, etc complete all as specified and directed.

M & L for 25 mm thick plain cement concrete type B1 1:2:4 (20 mm graded aggregate) as in sub base complete all as specified and as directed.

M & L for coloured vitrified ceramic tiles double charged, 8-10 mm thick (square/rectangular) polished,area of each tiles n exc 0.36 sqm, ,in floors etc over 15 mm thick screed bed in cement mortar 1:4 set set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for Non-skid coloured ceramic tiles (square/rectangular) 7 to 8 mm thick, area of each tile exc 0.11 sqm but not exc 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface,complete all as specified and directed.

M&L for Glazed ceramic tiles in vertical surface 300 x 450 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface complete all as specified and directed.

Material and labour for joint free non skid ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm in floors set and jointed in neat cement slurry and pointed in coloured cement to match over 15mm thick screed bed in CM 1:4 complete all as specified and as directed by Engr-in-charge.

Dismantling floor hearth or wall tiling including cement mortar beddig not backing and removing rubbish off the premises complete all as specified and as directed.

M & L for vitrified ceramic tiles , 8-10 mm thick (square/rectangular) polished,area of each tiles n exc 0.36 sqm,in skirtings etc over 10 mm thick back coat in cement mortar 1:3 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L glazed ceramic coloured tiles 450X 300X 7-8mm thick as in skirting / dados set and jointed in neat cement slurry and pinted in white or coloured cement to match over 10 mm back coat in CM 1:3 complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar as in kitchen platform, floors, aprons etc complete all as specified and as directed.

M&L Granite slab 16-18 mm thick as in pillars, window cill, cooking platform and the like in cement motar 1:4 including painting in white cment 1:2 using marble dust with a mixture of pigment to match the shade of granite including cutting polishing and moulding on edges complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps , cooking platform, and other similar situations complete all as specified and as directed.

M&L for 10mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes complete all as specified and as directed.

M&L for Machine cut kota stone slab flooring 18-20 mm thick over 20 mm thick cement mortar 1:4 screed bed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for machine cut kota stone joint free 18-20 mm thick in riser/tread of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including 20mm thick cement screed or bedding layer in cement mortar (1:4), rubbing and polishing etc complete all as specified and as directed.

Taking down cement plaster from brick/concrete surfaces including raking out joints, hacking for key and scrubbing down with water etc all as specified and directed.

M&L for Rendering 15mm thick on brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement including mixing integral water proofing compound in the proportion as mentioned in manufacturer's instructions complete all as specified. (Water proofing compound to be measured and paid for separately).

Material and labour for 10mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces including finishing even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge.

M&L for 10 mm thick rendering as backing coat to receive the tiles on fair faces of brick /concrete surfaces in cement mortar 1:3 and finished even and rough complete all as specified and as directed.

Material and labour for 5 mm thick rendering in CM 1:3 on concrete ceiling surfaces including finishing even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge.

Supply only integral water proofing compound complete all as specified and directed.

Material and labour for 5 mm thick rendering in CM 1:3 on concrete ceiling surfaces including finishing even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge.

Preparation of new plastered wall surfaces and applying two coats of oil bound distemper white or tinted with roller application over a coat of chalk whitening primer over 1 to 2 mm thick wall care putty complete all as specified and as directed by Engr-in-charge.

Material and labour for preparation of new plastered surfaces of walls and applying two coats of cement based paint white or tinted over a coat of chalk whitening primer complete all as specified and as directed by Engr-in-charge.

Preparation of new plastered wall/facia surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. complete all as specified and directed.

Preparation of new plastered ceiling surfaces and applying three coats of white wash all as specified and directed

Preparation of old plastered ceiling surfaces and applying one coat of white wash all as specified and directed

M&L for preparation of new plastered surfaces on walls and applying three coats of white wash.complete all as specified and directed.

M&L for preparation Old surfaces including complete Removal of existing surface and applying two coats of Oil Bond distemper on walls all as specified and directed.

M&L for 10 mm thick rendering in CM 1:3 on roof sufaces, finished even and smooth without using extra cement complete all as specified. Note :- Supply only water proofing compound shall be measured and paid seperately under the respective item.

M&L for Brick work with sub class "B" bricks straight or curved on plan exceeding 6 Metre mean radius in cement mortar 1:6 complete all as specified and as directed.

M&L brick work with sub class B bricks straight or curved on plan to any radius built in CM 1:6 but except bricks all as specified and as directed.

Brickwork with sub class 'B' bricks in one brick thick honey-comb walling, built in CM 1:4 complete all as specified and as directed.

M&L half brick work with sub class B bricks straight or curved on plan to any radius built in CM 1:4 all as specified and directed.

M&LProviding cement concrete in steps, seismic and other similar bands, parapets and railings up to 60 cm in height, coping, kneeless apex stones , bed plates, kerbs not provided for including weathering, slightly rounded or chamfered angles all as directed, 1:2:4 mix type B-0 (12.5mm graded aggregate) complete all as specified and as directed.

M&L PCC 1:2:4 type B-1 using 20mm graded aggregate as in coping/benching complete all as specified and as directed.

Demolition of cement concrete (reinforced) as in roof, floors (other than ground floor), beams, staircase, landing, chajjas and similar suspended work complete all as specified and as directed.

Design Mix Reinforced cement concrete M-25 as slabs supported on walls, beams and columns, in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Use and waste of form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exceeding 200mm thick surface horizontal or sloping, fair finished surface of concrete complete all as specified and as directed.

Mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping ends and binding with and incl mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and directed.

All as per srl item No. 49 above but 5mm dia and over including 10mm dia in stirrups, spaces and binders etc all as specified.

Taking down chowkhat or frames with shutters (without taking off shutters from the frames) n.exc 1.5 Sqm each including cutting holes for taking out hold fasts, dismantaling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost) complete all as specified and as directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frames) exc. 1.5 Sqm but n.exc 4 Sqm each including cutting holes for taking out hold fasts, dismantaling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost) complete all as specified and as directed.

M&L for pressed steel frames for doors made out of 1.25mm thick MS sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate ,12mm bar thresh hold etc. complete , of frame size 125 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified.

M&L for pressed steel frames for doors made out of 1.25mm thick MS sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate ,12mm bar thresh hold etc. complete , of frame size 105 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and as directed.

Material and labour for plain cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregates as in filling of pressed steel door frame all as specified and as directed.

Cutting holes in brick walls in cement mortar exc half brick but not exc one brick for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and as directed.

M&L PCC 1:3:6 type C1 (20mm graded aggregates) as in bed blocks for hold fasts including necessary form works complete all as specified and as directed.

M&L for Flush shutters 30 mm thick , solid core construction, with block board core including magic eye providing and plywood face panels, commercial type on both sides and both face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed.

S&F factory made, 2nd class hard wood 35 mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauze etc complete all as specified and directed.

S&F Solid PVC door frame of size 50mm x47mm made out of 5mm plain clour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing complete all as specified and as directed.

S&F factory made solid panel PVC moulded door shutter, 28 to 30 mm thick(styles), with 2, 4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.

S&F steel window (box type) factory made with side hung shutters including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all specified. Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1269/2008 Sheet 1/3 to 3/3 ii) MS fillets, glazing, wire gauge shall be measured and paid separately.

Description all as per item as above here in before but without glazing bar complete all as specified. Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1269/2008 Sheet 1/3 to 3/3 ii) MS fillets, glazing, wire gauge shall be measured and paid separately

S&F mild steel ventilators (box type) factory made with top hung shutters and bottom fixed type shutters including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all specified. Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1302/2009 Sheet 1/3 to 3/3 ii) MS fillets, glazing, wire gauge shall be measured and paid separately

Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for cooler stand and similar work conforming to Fe 290 Gd E-165 complete all as specified and as directed.

Supply and fix 4mm thick sheet glass, ordinary quality and glazing with rubber beading around the glass, in squares n exc 0.50 sqm in each pane complete all as specified and as directed.

Supply and fix 4mm thick sheet glass, frosted or grounded on one side with rubber beading around the glass, in squares n exc 0.50 sqm in each pane complete all as specified and as directed.

S&F for 150mm size stainless steel barrel tower bolt of extruded section and fixed.all as specified and directed.

S&F for 150mm sizestainless steel handle of febricated type and fixed.all as specified and directed.

S & F Second class hard wood small fittings such as brackets of any type, shaped door and window stops and the like including all necessary Labour; articles not exceeding 200 Cu.Cm each complete all as specified and as directed.

S&F stainless steel cold rolled butt hinges medium weight 100 mm long complete all as specified and as directed.

S&F stainless steel cold rolled butt hinges medium weight 75 mm long complete all as specified and as directed.

Supply and fix in 300mm long stainless steel , sliding door bolt with hasp, stapple (bolt type) and fixing clip of sheet, and fixing bolts and sliding bolts of stainless steel complete all as specified and as directed by Engr-in-charge.

S & F in repairs mild steel, 250 mm, ordinary rat tail rod pattern door spring including roller and roller plate, fixed to frame, complete all as specified and as directed.

Preparation of new steel surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel painting over a coat of red oxide primer complete all as specified and as directed by Engr-in-charge.

Preparation of new wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel painting over a coat of pink primer complete all as specified and as directed by Engr-in-charge.

Supply and fix Galvanised steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples all as specified and as directed.

Dismantling wrought iron or mild steel work in any description not otherwise specifically provided for all as directed.

M&L for Welded steel wire fabric n,exc 4kg per sqm, supplied and fixed complete to wood or steel members complete all as specified and as directed.

Roughing surfaces of old conc surfaces by picking up , sweeping,cleaning and washing down with water to remove dust etc including taking down tarfelt and brushing neat cement slurry @3kg/Sqm including 20mm thick screeding in CM (1:4) finished even and smooth mixed with water proofing compound (WPC shall be measured and paid separatley).

Material and labour for 3mm thick APP based polymeric membrane minimum weighing 3 kg/sqm non-woven polyester reinforcement polymeric water proofing membrane (wt not less than 150 gms/sqm) laid on primed surfaces by gas flame torch application and apply one coat of industrial bitumen 85/25 grade at the rate of 1.20 Kg/Sqm over APP Memberence complete all as specified and as directed by the Engineer-in-Charge. Note :- Water proofing treatment will be done by IWL or through a specialized agency which will further have to give a five years warranty for rectification of any defect if incurred at a later stage, otherwise no payment shall be made to the contractor if water proofing treatment is executed by engaging local labour complete all as specified and as directed.

M&L PCC 1:5:10 type E2 using 40 mm graded brick aggregate as in filling under sunken floors etc complete all as specified and as directed..

M & L for cement concrete 1: 4 :8 type D 2 using 40 mm graded stone aggregate as in foundation filling and mass concrete etc complete all as specified and directed.

Material and labour for Cement concrete tiles 30cm x 30cm x 20mm thick, machine pressed; set jointed with grey cement and no pigment and pointed in neat cement slurry in floors, and cut and polished cement to match over 20mm thick screed bed in CM 1:4 complete all as specified and as directed by Engr-in-charge.

Providing of treating the soil along with external perimeter of building at the rate of 2.25 litre of Antitermite treatment chemical emulsion per metere of the perimeter wall, complete all as specified and as directed by Engr-in-Charge. Note : The treatment work shall be carried through authorized agency only, and certificate for the same ofr warranty shall have to be furnished before submitting payment)

Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed.

M & L for 75 mm thick cement concrete 1:3:6 type C 2 (40 mm graded aggregate ) as in plinth protection, finished even and smooth without using extra cement complete all as specified and directed.

M&L for providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and as directed.

S&F in repairs drapery rod of 25mm dia stainless steel/powder coated decorative along with brackets and end caps of quality as approved by GE.

M&L for rolled mild steel work of angle iron as in frames of doors & Cup Board etc conforming to grade Fe 290 Gde E-165) complete all as specified and as directed.

S&F 18/19mm thick ISI, termite proof , chemically well pressed, block board exterior grade prelaminated, one side with decorative choice lamination and other side balancing white lamination fixed with screws to frame work for kitchen cabinet stand cup boards etc includimg 6mm thick wood beading all around complete all as specified and directed.

S&F 75mm size hasp and staple safty type stainless steel with mild steel hinges pin including bolt to hinge plate and fixed with screw complete all as specified and as directed.

S&F continuous (piano) hinges, mild steel,bright finishor electrogalvanised width of flaps (when open) 30 mm complete all as specified and as directed.

S&F 100mm Hasp and staple, safety type, stainless steel with steel hinge pin including bolt to hinge plate and fixed with screwscomplete complete all as specified and as directed.

Dismantling water tanks and removing to store exc 500 & n.exc 1000 ltrs of capacity all as specified and as directed.

S&F Rotational molded three layered polyethylene water storage tank (cylindrical vertical with closed threaded top) hoisted and fixed in position including connecting inlet/outlet pipe connecting with necessary fittings all as required at site and specified in SSR part -I of capacity 1000 litres and dismantling of old UNSV water tank of same capacity all as specified and directed by Engr-in-Charge.

Supply and fixing "as in repair" ball valves of size 20mm bore dia high pressure of PTMT (Make-Prayag) with epoxy coated aluminium rod and high density plastic ball (Minimum weight not less than 210 gms) screwed for iron pipe and fixed including necessary fitting as reqd at site complete all as specified and directed by Engr-in-Charge

Taking up down steel water tubing and connection incl cleaning for refixing or removal to stores for bore in pipe 15 mm complete all as specifed and directed.

Taking up down steel water tubing and connection incl cleaning for refixing or removal to stores for bore in pipe 20 mm complete all as specifed and directed.

S&F steel water tubing medium grade GI with all fitting and fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc) of nominal bore 15mm complete all as specified and directed.

S&F steel water tubing medium grade GI with all fitting and fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc) of nominal bore 20mm complete all as specified and directed.

Supply and fixing "as in repair" stop valves/angle valve of 15 mm bore, but fancy type, chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions including necessary fitting as required at site complete all as specified and directed by Engr-in-Charge.

Supply and fix in repairs Bib tap 15 mm bore, brass, chromium plated, fancy type with crutch or butterfly handle conforming to IS screwed down, screwed for iron pipes or for brass ferrule complete all as specified and as directed. Make : Jaquar /Cera/Prayag/KOHLER / MARC /HR Johnson /Parryware

S&F in repairs fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed of bore dia 15mm complete all as specified and as directed.

S&F in repairs Vitreous China wash down water closet pan “Pedestal pattern” size 580x440mm white (excluding flushing cistern and flush pipe) with CI ‘P ’ trap of long arm of suitable size including connection to flush pipe, anti symphonic pipes etc complete all as specified and directed.

S & F plastic water closet seat cover , white closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed

S/F in repair hand health faucet complete all as specified and as directed.

Supply and fix in repairs vitreous china wash hand basin white flat back size 550x400mm excluding taps waste chain and plug and porcelain stopper but including brackets waste fitting brass chromium plated 32mm dia with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed etc complete all as specified and as directed by Engr-in-charge.

S & F in repairs PVC connection 15 mm size with PTMT (Make-Prayag) Nuts of length 450 mm complete all as specified and directed

S&F PVC waste pipe for WHB/Sink 32 mm/ 40 mm bore with one end with socket complete all as specified and directed.

S&F in repairs sinks with draining board, made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar including fixing cantilever brackets connecting union to pipe and 32mm dia GI pipe duly painted upto Nihani Trap or Floor trap complete as directed at site, overall size 915mmx460mm bowl size 410mm x 330mm x160mm complete all as specified and as directed.

Supply and fix in repairs PVC valveless, syphonic action, flushing cistern low level 10 ltrs capacity, white with inlet ball valve float and handle including brackets and flush pipe of polyethylene of low or high quailty PVC 32mm dia complete all as specified and as directed by Engr-in-charge.

S&F in repair Soap dish, stainless steel white size 160x160x90mm, fixed to plugs with chromium plated brass screws complete all as specified and as directed.

S&F in repair CP tubular towel rail , 600mm long between flanges aluminium anodised, fixed with rawl plugs complete all as specified and directed.

S&F in repairs Brass chromium plated shower rose 125mm size including shower arm all as specified and directed

Supply and fix in repairs stainless steel grating doom 100mm dia complete all as specified and as directed by Engr-in-charge.

S &F in repair sheet glass shelf assembly 500 x 125 mm consisting of 5.5 mm thick sheet glass shelf with chromium plate bracket guard and railing 60 cm long complete all as specified and as directed.

M&L in repairs Gun metal globe of gate valve with iron wheel head, screwed both ends of size 15mm complete all as specified and as directed.

S&F in repair gun metal globe gate valve 20 mm bore complete all as specified and directed

S&F in repairs plate rack made of stainless steel, 600 x 750X0.55mm including fixing as per manufacturers instruction complete all as specified and as directed.

Removal of concrete and plaster debris to a distance upto 250 m and depositing where directed at a level n exc 1.50 m above the starting point complete all as specified and as directed.

Dismantling cast iron pipe & reinforced concrete drain pipes, jointed in cement mortar of any dia upto 100mm complete all as specified and as directed.

S&F PVC, waste and vent pipes 110mm bore in any length with or without ears with cement joints laid in trenches complete all as specified and as directed.

All as per srl item No 125 above but 75mm bore pipes complete all as specified and as directed.

S&F PVC, waste and vent pipes 110mm bore in any length with or without ears with cement joints fixed to walls duly apply a coat of bitumenous black paint complete all as specified and directed.

All as per srl item No 127 above but 75mm bore pipes fixed to wall complete all as specified and as directed.

All as per srl item No 127 above but 50mm bore pipes fixed to wall complete all as specified and as directed.

S&F PVC bend (any radius) diminishing pieces or tapers 100mm bore fitted with oval access door complete all as specified and as directed.

S&F PVC bend (any radius) diminishing pieces or tapers 75mm bore fitted with oval access door complete all as specified and as directed.

S&F PVC bend/reducer (any radius) diminishing pieces or tapers 100mm bore fitted complete all as specified and as directed.

S&F PVC bend (any radius) diminishing pieces or tapers 75mm bore fitted complete all as specified and as directed.

S&F 75mm bore PVC cowls complete all as specified and as directed.

S&F Stack clamps made out of flat iron and round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100/110mm bore pipe.complete all as specifiecd and directed.

S&F Stack clamps made out of flat iron and round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75 mm bore complete all as specified and as directed.

S&F PVC branch pieces single (equal unequal ordinary or inverted (Spigot or socketed type) or with parelled branches 75mm bore (fixed in repairs) complete all as specified and as directed.

S&F PVC branch pieces single (equal unequal ordinary or inverted (Spigot or socketed type) or with parelled branches 100mm bore (fixed in repairs) complete all as specified and as directed.

S&F PVC vent cowl for 75m dia pipe complete all as specified and as directed.

S&F PVC vent cowl for 50m dia pipe complete all as specified and as directed.

S&F PVC floor trap 75 mm fixed with cement concrete type B1 (1:2:4 ), with grating including jointing to waste pipe complete all as specified and as directed.

S&F PVC P or S trap 100 mm fixed with cement concrete type B1 (1:2:4 ), with grating including jointing to waste pipe complete all as specified and as directed.

PVC (SWR) pipes 110mm bore single socketed , in any length with rubber ring joints fixed to wall complete all as specified and as directed.

S&F PVC (SWR) bend any radius for 110mm bore pipe complete all as specified and as directed.

M&L concrete bed to drain pipe incl packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) for 150mm bore pipe complete all as specified and directed.

M&L for cement concrete 1:3:6 type C1 (20mm graded aggregate) as in surface channels and drains including necessary formwork etc all as specified.

Demolition and breaking up 150mm dia SGSW/ AC or reinforced conerete pipes set in cement mortar and taking out of trenches complete all as specified and directed.

S&F for 150 mm Reinforced concrete pipes, class NP3, laid and jointed complete with collars

M&L concrete bed to drain pipe incl packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) for 150mm bore pipe complete all as specified and directed.

M&L for cement concrete 1:4:8 type D2 (40mm graded aggregate) in bed to 150 mm dia pipes including packing under, and haunching against the sides of pipes after they are laid and tested for complete all as specified.

Providing Precast cement concrete 1:2:4 type B-1 (20mm graded aggregate ) as in manholes cover slab etc all as specified and directed by Engr-in-charge.

M&L Hardcore of gauge not exc. 63 mm, Broken stone or boulders deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed

M&L for 75mm thick Plain cement concrete type B-2, 1:2:4 (40mm graded stone aggregate) finishing cement concrete surface even and smooth by using extra cement etc complete all as specified and as directed.

M&L 25 mm thick Sand filling under floors or in foundations including watering and consolidation for laying of interlocking tiles complete all as specified and directed

S& F coloured machine vibro mechenically floated glossy finish interlocking cement paver block,any shape and size confirming to IS 15658-2006 of 60mm thickness,M-35 Grade with,topping of cement mixed with imported pigment,colour and shape shall be approved by engr-in-charge ISI Marked.

M&L PCC 1:2:4 type B-1 using 20mm graded aggregate as in coping/benching complete all as specified and directed.

Reinforce cement concrete M-25 (20mm graded aggregates) design mix as in foundations, including rafts, footings, foundation, beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

Reinforce cement concrete M-25 (20mm graded aggregates) design mix columns, pillars, piers,posts and struts complete all as specified and directed.

Reinforce cement concrete M-25 (20mm graded aggregates) design mix as in beams, cantilevers,bressummers, lintels over 1.5m span all as specified and directed.

M&L For Reinforce cement concrete M-25 (20mm graded aggregates) design mix as in chajjas complete all as directed

Use of formwork to chullah hoods, chajjas,troughs and similar items including edges for rough flat finished surface of concrete, complete all as specifed and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or to batter for rough flat finished surfaces of concrete,complete all as specified and directed.

Formwork to sides of pillars,posts, struts, piers, columns and stanchions for rough flat finished surface of concrete, complete all as specified and as directed.

Formwork to flat sides and soffits of or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, complete as per specified & directed.

Formwork to edges of concrete flats, treads breaks in floors, window cills, concrete railings,openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in wall, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and as directed.

M&L 75 mm thick cement concrete (1:4:8) type D2 as sub base to floor complete all as specified and as directed.

M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in floor and finished even and fair complete all as specified and as directed.

Preparation of new steel surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel painting over a coat of red oxide primer complete all as specified and as directed by Engr-in-charge.

S&F Stainless steel handles cast type, anodised, 150 mm size complete all as specified and as directed.

S&F for 20mm dia, Ball brass, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and as directed.

S&F viterious china urinals half stall white incl CP urinal Spray Nozzal complete incl providing and fixing of plug bedding urinal against wall in cement mortor 1:2 securing urinal to plug with and incl 60mm long brass screws pointing incl 60mm long brass complete all as specified and directed.

S&F for Angle valve, cast copper alloy fancy type screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore complete all as specified and as directed.

S&F, 15 mm dia bib tap fancy type chomium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and as directed.

S&F 15mm bore pillar tap cast copper alloy with capstan head chromium plated screwed down under high pressure with or without lettered hot or cold with long shank and fly nuts screwed for iron pipe complete all as specified and as directed. (Make Jaquar Jaquar /Cera or equivalent)

S&F 32mm dia waste coupling of PTMT(half or full threaded) (Minimum weight 32mm45gms), complete all as specified and as directed.

Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed.

M&L for extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, incl forms moulds, mitered/stopped ends etc complete all as specified and as directed.

S&F for 150 mm bore Salt-glazed stoneware drain pipes laid in trenches and jointed complete all as specified and as directed.

M&L Mild steel TMT bars 6mm to 8mm dia,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and as directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and as directed.

M & L for brick bats for loose filling, of gauge 80 mm to 150 mm graded complete all as specified and as directed.

Forming embankments includingraising (or lowering) earth,spreading in layers n exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape,etc., n exc. 1.5m high from base complete all as specified and as directed.

Taking down carefully, copper/ aluminum point wiring (light, fan, socket or power) complete including fitting such as switch, sockets, ceiling rose, pendants socket,fan regulators any type, rectangular board ,light fittings,terminal boxes etc removing materials for taking credit and making good disturbed surfaces of walls floors and ceiling complete all as directed.

Point wiring for one light/ fan/bell point controlled by one switch using 1.5 Sq mm FRLSH copper conductor cables (multistranded) PVC insulated and unsheathed in and including PVC concealed conduit pipe as per site requirement (size not less than 20mm dia), medium grade with Modular sunken boxes & PVC/metal back plate for mounting modular type switches, sockets & regulators etc with cover plate modular type including supplying and laying PVC insulated and stranded unsheathed 1100 volts coppper conductor cable 1.5 Sq mm as earth wire connected to earth dolly including cutting of chases in wall /ceiling etc and making good the disturbed surfaces match to existing with cement mortar and putty white /colour wash complete all as directed. Make: Havells/ Finolex/ Polycab.

All as per Item No. 184 But for one light point control by two nos two way switches with other Independent Board with two run of 1.5 sqmm PVC insulated unsheathed FRLS copper conductor single core multi strand flexible cable and 1.5 sqmm PVC insulated unsheathed FRLS copper conductor single core cable (green color) as earth lead or & as directed by Engg- in- charge to match with the existing specification complete all as specified .Make: Havells/ Finolex/ Polycab.

Point wiring for for 3 Pin 16 Amps socket outlet independent board 4.0 Sq mm FRLS copper conductor cables (multistanded) PVC insulated and unseathed in and including PVC concealed conduit as per site requirement (size not less than 20mm dia), medium grade with Modular sunken boxes & PVC back plate for mounting modular type switches, sockets & regulators etc with front plate modular type including supplying and laying PVC insulated unsheathed 1100 volts coppper conductor cable 4.0 Sq mm as earth wire stranded and conected to earth dolly as specified.Note:- Cutting and making same the wall patchs after laying the wire and conduit using putty, white wash and distamper. The surface should be made smooth using putty and should match exactly with the existing wall finish. (2x4.0 sq. mm +1x4.0 sq. mm earth wire for Geyser) Make: Havells/ Finolex/ Polycab.

All as per srl item No 184 but for 3 pin 6 Amps socket outlet independent board including PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly.Make: Havells/ Finolex/ Polycab.

All as per srl item No 184 but for 3 pin 6 Amps socket outlet on the same board including PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly.Make: Havells/ Finolex/ Polycab.

All as per Srl item No 184 but for 3 Pin 16 Amps socket outlet independent board with cable 2.5 Sq mm including copper PVC insulated PVC unsheathed 2.5 sq mm earth wire standard and connected to earth dolly.Make: Havells/ Finolex/ Polycab.

All as per item no 183 above but cable 2.5 sqmm FRLSH for one 5 pin 5 Amp socket outlet point on an independent board. Make: Havells/ Finolex/ Polycab.

S&F for modular switch 6 Amps single pole one way 230 V, 50 Hz, AC , with outer strip complete all as specified and directed by Engr In charge. Make:Legrand/Havell crabtree/L &T/ Schneider

S&F for modular switch 6 Amps single pole two way 230 V, 50 Hz, AC , with outer strip complete all as specified and directed by Engr In charge. Make:Legrand/Havell crabtree/L &T/ Schneider

S&F for modular switch 16 Amps single pole one way 230 V, 50 Hz, AC , with outer strip complete all as specified and directed by Engr In charge. Make:Legrand/Havell crabtree/L &T/ Schneider

S & F modular Bell push flush type 6 amp 230 V, 50 Hz, AC , with outer/inner cover complete all as specified and directed by Engr In charge. Make:Legrand/Havell crabtree/L &T/ Schneider

S&F for modular socket 3 Pin 6 Amps flush type 230 V, 50 Hz, AC , with outer/inner cover complete all as specified and directed by Engr In charge. Make:Legrand/Havell crabtree/L &T/ Schneider

S&F for modular socket combined 2-in-1, 6 Pin 6 & 16 Amps 230 V, 50 Hz, AC , flush type with outer/inner cover complete all as specified and directed by Engr In charge.Make:Legrand/Havell crabtree/L &T/ Schneider

M &L Ceiling rose, surface bakelite 65x 50mm two to three terminals fixed on PVC Round Blockcomplete all as specified and directed by Engr In charge. Make:Legrand/Havell crabtree/L &T/ Schneider

S & F calling Bell ding dong 230 volts single pole 50Hz complete all as specified and directed by Engr In charge.Make:Legrand/Havell crabtree/L &T/ Schneider

S&F Sheet metal enclosure double door type for DBs 8 way 240 volts with 200 Amps rated busbar and neutral link including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.Make: L&T/ C&S/CG/ Schenider/ Legrand.

S&F metal clad socket outlet with single pole enclosure with 2 pin and earth plug socket including 1No. MCB SP 20A 10kA complete all as specified and as directed Make:Legrand/Havell crabtree/L &T/ Schneider

S & F in replacement MCB single pole 240 volt any rating from 06 to 32 amps "C" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable.Make: L&T/ C&S/CG/ Schenider/ Legrand.

S & F in replacement MCB single pole and neutral 240 volt any rating upto 32 Amp "C" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable.Make: L&T/ C&S/CG/ Schenider/ Legrand.

S&F in replacement Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 10 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 10 Sq mm as earth lead all as specified.(For TPN DB to SPN DB).Make: Havells/ Finolex/ Polycab.

Earthing complete with galvanized steel earth plate electrodes 600 mmx600 mm x6.3 mm thick buried directly in ground earth plate not less than 2.25 m deep below normal ground level with top edge of the plate not less than 1.5 m below normal ground level connected to and including galvanized steel earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and steel including PCC pit in PCC 1:2:4 type B-1using 20 mm graded crushed stone aggregate, RCC frame with 40mm thick RCC cover reinforced with 8mm dia deformed bars handle. including excavation and earth work in any type of soil medium grade GI watering pipe 20mm bore with funnel and wire mesh and light grade GI protection pipe 15mm bore main board complete all as shown in electrical plate No 5 connected to main control board all as specified and testing on completion. Note: Excavation earthwork charcoal PCC pit is covered under this item including taking out existing earth plate etc.

S&F Modular electronic step type fan regulator 100 watt 230 volts 50Hz two module C/S deluxe type complete all as specified and directed. Make:Legrand/Havell crabtree/L &T/ Schneider

Supply and fixing LED lights fitting 1x 20W, 230V,AC decorative box type with driver, holder including LED tube light , which gets automatically switched ON during power cut and run effectively upto 3 Hours ,Lumens Capacity-2000lm, pf- 0.90(min) ,Colour temperature 6500K, CRI > 80, IP 20 connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.MAKE : Philips/Syska/Havells/Bajaj/Orient

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitablesize.MAKE : Philips/Syska/Havells/Bajaj/Orient

Supply and fixingLED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp which gets automatically switched ON during power cut and run effectively upto 3 Hours, Lumen Capacity-1000lm, pf- 0.95(min) ,Colour temperature 6500K, CRI > 80, IP 20 including connecting up with three core flexible copper conductor cable of suitable size complete. MAKE : Philips/Syska/Havells/Bajaj/Orient

Supply and fixing LED building security light fitting 30 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp,clamps,suitable bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete MAKE : Philips/Syska/Havells/Bajaj/Orient

Supply , Laying, Testing and commissioning cable XLPE insulated screened PVC bedded galvanized steel strip or wire armoured electric power cables(heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 Sqmm x 4 core size all as specified.Make: Havells/ Finolex/ Polycab.

S&F Double Walled corrugated DWC Pipe of size 40 mm including snap fit coupler Pt-II for protection of LT Cable in underground all as specified.

Supply and fixing GI tubing light grade 40 mm dia along the wall/ in trenches/ in duct / in culvert /road crossing and including provisioning of suitable mild steel flat iron clamps and bolts, nuts and double washers etc for holding of GI pipe alongwith poles all as specified.

S&F for batten angle lamp holder insulated body with back plate suitable for batten fittings including complete all as specified and as directed.

Supply and fixing Emergency LED lamp 9 watt, Lumen Capcity 900lm , Pf>0.9, Colour Temp-6500K, CRI>80, Protection Class-IP20,Base Type- B-22D/E27. MAKE : Philips/Syska/Havells/Bajaj/Orient

Taking down ceiling fan/Exhaust fans/ Geyser (C/F of any size/make), cleaning its dust particles oiling,greasing,one coat of synthetic enamel white spray painting with blade ,reassemble the same along with all fittings and hanging the same back to its original position including connecting the wire to ceiling rose etc complete after completing the wiring all as specified and as directed by Engr-in-Charge. Note :- (i) The spares like condensor, ball bearing, cotter pin, nuts & bolts, connecting rods & hooks etc if found defective/damage deemed to be replaced and make the ceiling fans functional. No extra payments will be done on this account.

Taking down existing prepaid meter & display unit alongwith conduit pipe dia 25mm qty approx 09 RM casing capping pipe size 20mm qty approx 2 RM & 6 core control cable (RJ-11) qty approx 11RM from each qtr and refixing the same back making it concealed to its original position including the connecting the 6 core control cable (RJ-11) from prepaid meter to display unit complete all as specfied and as directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers. Make : Bajaj/Khaitan/Atomberg/Orient/Havells

Supply and fixing Emergency LED lights fitting 1x 20W, 230V,AC decorative box type with driver, holder including LED tube light , which gets automatically switched ON during power cut and run effectively upto 3 Hours ,Lumens Capacity-2000lm, pf- 0.90(min) ,Colour temperature 6500K, CRI > 80, IP 20 connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Supply and fixing Emergency LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp which gets automatically switched ON during power cut and run effectively upto 3 Hours, Lumen Capacity-1000lm, pf- 0.95(min) ,Colour temperature 6500K, CRI > 80, IP 20 including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply & Laying in trenches or passing through pipe, 1100 volts grade heavy duty cable with "XLPE" insulated aluminium conductor standard served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of 10 Sqmm x 2 core size all as specified including taking down old cable. Note : Earth work and other connected work shall be measured & paid sperately.

Supply and fix electric water heater, storage type with inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc including all GI connection (cutting T, inserting all type of (Elbow, Nipple, Socket ete) complete all as specified and directed by Engineer-in-Charge.

MAHADEV ENTERPRISES (BID ID -3357423)

VIRINDER SINGH (BID ID -3360504)

JOGINDER SINGH (BID ID -3360864)

M/S R S Builders (BID ID -3355913)

M/S Ashok Kumar Jaswal (BID ID -3360549)

PARDEEP SHARMA (BID ID -3360111)

M/S IMRAN MAJID (BID ID -3368251)