VAYALOOR ANGANWADI UNDER 15TH FC

Amount

Earth work excavation and depositing on bank with initial lead and lift in hard gravelly soil, hard stiff clay, black cotton soil, hard red earth,shales, murram, and earth muds with 50% fair sized boulders as per SS 20B for narrow foundation.

Collection and supply of gravel from approved quarry including cost and conveyance of all materials to site including all labour charges for filling etc.complete,

Cement Concrete 1:4:8 mix using 40mm metal including cost and conveyanceof all materials to work site and all labour charges etc.

Brick work in C.M 1:5 mix using country bricks incuding cost and conveyance and all labour charges etc. Main wall alround Basement, Cross wall bet.hall and store, Cross wall bet.Kitchen and store

Brick work in C.M 1:5 mix using country bricks incuding cost and conveyance and all labour charges etc.

RCC 1:1.5:3 mix using 20mm metal including cost and conveyance and all labour charges etc.

Column above Grade beam

Supplying and errecting for sides & soffits including supports and strutting upto 3.29m height for plane surface in all floors including cost and conveyance and all labour charges etc.

colum above gb, Lintel Bottom Sides, Roof & Roof Beam

Supply and fabrication of steel including cost and conveyance and all labour charges etc. complete.

Weathering coarse concrete using 20mm size broken brick jelly with in pure slaked lime over the RCC Roof in the proportion of 32 : 12 1/2 by volume laid in layer beating the concrete with the wooden batters etc as per standard specifications .

Finishing the top of roof with one course of Pressed tiles conveyance of all materials to site and all labour charges etc complete for 10 Sqm

Plastering with cement mortar 1:5, 12mm thick including cost and conveyance and all labour charges etc.

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work.

Cement concrete 1:2:4 mix using 20mm ISS metal including cost and including cost and conveyance and all labour charges etc,.

Paving the Floor with scratch proof vertified tiles of size 600x600x8mm laid in CM 1;2,10mm thick and pointing with white cement 0.40kg per sqm mixed with colouring pigment to siut the colour of the tiles including cost and conveyance of all materials to site and all labour charges etc complete

Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone M.Sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) Using anti-skid tiles (Observed Data)

Flooring with following ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three M.Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification.

Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes 150mmX 150mmX 6mm set in Cement Mortar 1:2 (One Cement and Two crushed stone M.Sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc.,

Towards the cost of steel door of size 0.9 mx2.4m including all charges etc.

Towards the cost of steel door of size 0.75mx1.80 m including all charges etc.

Towards the cost of steel door of size 1.10mx2.4 m including all charges etc.

Towards the cost of steel ventilator of size 0.9x0.45 m including all charges etc.

steel ventilator

Towards the cost of steel window of size 1.20m*1.6m including all charges

Towards the cost of steel window of size 1.20m*0.90m including all charges

Labour charges for fixing of doors,windows and ventilator including all charges etc. D-Doors, -3 D-Doors - 1 D1-Doors - 1

W-Window - 4, W-Window - 2, V-Ventilator - 1, V - Ventilator - 3

Painting two coat with approved quality of distemper with colour over one coat of white cement for primier coat for the base including preparing surface and all materials cost labour etc

Painting two coat with ready mixed plastic emulsion of first quality paint and of approved colour over a priming coat including thorogh scarpping clean removal of dirt etc complete.

Painting two coats using Ist quality readymix enamel paint of approved colour over new iron work including cost and conveyance and all labour charges etc.

Provision for electrification arrangements with service connection

LIGHT POINT SD 20

FAN POINT SD 20

FAN point SD112

Plug point (SD38)

CFL lamp (SD80)

TUBE Light Fittings ( SD 88 )

DPI swtich of 500 V (SD142)

G I Pipe (SD69)

Service Wire (SD64)

Bulk head fitting (SD83)

Water Supply

1000 lit pvc tank

25mm UPVC pipe

25mm UPVC elbow

25mm UPVC Bend

25 mm UPVC Tee

Cost & Supply For Baby W.C including cost and conveyance of all materials to work site and labor charges etc complete.

Cost & Supply For E W.C including cost and conveyance of all materials to work site and labor charges etc complete.

Cost & Supply of Cudappah Slab including cost and conveyance of all materials to work site and labor charges etc complete. 20/30MM thick

Labour charges for fixing slab to cup board

Supplying and fixing PVC Rain water down fall pipes of following dia meter etc., complete.

Provision for Hand Rail for SS Works

Provision for Lock & Key

Towards drawing of cartoon

Provision of Name Board Charges

A.S.Arivazhagan (BID ID -1247189)