Repair/replacement of internal wiring with misc items of E/M works at Air Force Chandan and Jaisalmer under GE (AF) Jaisalmer

Amount

Taking down carefully existing unserviceable/perished conduit/ batten/ casing caping aluminium/copper point wiring any type for light, fan, bell, socket, power point etc complete including all fixtures and fittings such as batten/ conduit/casing caping, switches, sockets, ceiling rose, pendent holder, lamp holders, bracket holders, light fittings, top sheet covers, fan regulators etc and making good the disturbed surfaces of wall/ceiling complete all as specified & directed.

Point wiring for one light point controlled by one, one way switch with 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor Flame Retardant Low Smoke (FRLS) cable 1100 Volt grade including 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor Flame Retardant Low Smoke (FRLS) cable 1100 Volt grade as continuous earth wire in green colour to common earth and connected to earth dolly laid/drawn into and including non metalic rigid PVC conduit 20mm dia with accessories fixed to cutting chases in walls by cutter and making good the surface in cement and sand mortar 1:3 and to the original specification and PVC conduit on ceiling for steel structure/surfaces conduit with clamps, gutties etc for RCC ceiling with including cast iron/pressed steel/wooden terminal boxes (as per site requirement) including including providing new 3 mm thick plastic laminated sheet cover (Hylem) complete all as specified and directed.

All as per serial item No. 2.00 here-in-before but for one fan point controlled by one switch and regulator complete all as specified and directed.

All as per serial item No. 2.00 here-in-before but for one light point controlled by two way switch complete all as specified and directed.

All as per serial item No. 2.00 here-in-before but for one 3 Pine, 5/6 Amps, socket outlet controlled by one 5/6 Amps switch on same board complete all as specified and directed.

All as per serial item No. 2.00 here-in-before but for one 3 Pine, 5/6 Amps, socket outlet controlled by one 5/6 Amps switch on independent board complete all as specified and directed.

All as per serial item No. 2.00 here-in-before but for One 3 pin 5 amps socket outlet independent but below the switch board of light points in the same vertical plane complete all as specified and directed.

All as per serial item No. 2.00 here-in-before but for one bell/buzzer point controlled by one bell push complete all as specified and directed.

Point wiring for one 6 pin, 15/16 Amps socket outlet controlled by one 15/16 Amps switch on independent board with 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor Flame Retardant Low Smoke (FRLS) cable 1100 Volt grade including 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor Flame Retardant Low Smoke (FRLS) cable 1100 Volt grade as continuous earth wire in green colour to common earth and connected to earth dolly laid/drawn into and including non metalic rigid PVC conduit 20mm dia with accessories fixed to cutting chases in walls by cutter and making good the surface in cement and sand mortar 1:3 and to the original specification and PVC conduit on ceiling for steel structure/surfaces conduit with clamps, gutties etc for RCC ceiling with including cast iron/pressed steel/wooden terminal boxes (as per site requirement) including including providing new 3 mm thick plastic laminated sheet cover (Hylem) complete all as specified and directed.

Point wiring for one light point controlled by one way switch with 1.50 sqmm single core PVC insulated and unsheathed multistranded copper conductor Flame Retardant Low Smoke (FRLS) cable 1100 Volt grade including 1.50 sqmm single core PVC insulated and unsheathed multistranded copper conductor Flame Retardant Low Smoke (FRLS) cable 1100 Volt grade as continuous earth wire in green colour to common earth and connected to earth dolly laid/drawn into and including PVC casing & caping with accessories fixed on surface of walls/ceiling by means of PVC sleeves/dash fasteners with cadmium plated screws, all as per IS, terminated & including suitable size module boxes for housing of modular switches, sockets, regulators including taking down old unserviceable point wiring complete all as specified & directed. Note : (i) Unit rates quoted by contractor shall be deemed to included for cutting chases in walls, ceilings and making good surfaces in cement and sand mortar (1:3) and finishing the surfaces to match with existing surfaces. (Make : Hylem /Anchor/Formica including machine screws and washer etc for fixing switches sockets etc including 1.5 sqmm copper conductor, standard (green colour earth), PVC insulated unsheathed earth wire to commen earth and connected to earth dolly as specified and directed.

All as per serial item No. 10.00 here-in-before but for one fan point controlled by one switch and regulator complete all as specified and directed.

All as per serial item No. 10.00 here-in-before but for one light point controlled by two way switch complete all as specified and directed.

All as per serial item No. 10.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5/6 Amp switch on same board complete all as specified and directed.

All as per serial item No. 10.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5/6 Amp switch on independent board complete all as specified and directed.

All as per serial item No. 10.00 here-in-before but for One 3 pin 5 amps socket outlet independent but below the switch board of light points in the same vertical plane complete all as specified and directed.

All as per serial item No. 10.00 here-in-before but for one bell/ buzzer point controlled by one bell push complete all as specified and directed.

Point wiring for one 3 Pin, 5/6 Amps socket outlet controlled by one 5/6 Amps switch on independent board with 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor Flame Retardant Low Smoke (FRLS) cable 1100 volt grade including 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor Flame Retardant Low Smoke (FRLS) cable 1100 Volt grade as continuous earth wire in green colour to common earth and connected to earth dolly laid/drawn into and including PVC casing & caping with accessories fixed on surface of walls/ceiling by means of PVC sleeves/dash fasteners with cadmium plated screws, all as per IS, terminated & including suitable size module boxes for housing of modular switches, sockets, regulators complete all as specified and directed. Note : (i) Unit rates quoted by contractor shall be deemed to included for cutting chases in walls, ceilings and making good surfaces in cement and sand mortar (1:3) and finishing the surfaces to match with existing surfaces. (Make : Hylem/Anchor/Formica including machine screws and washer etc for fixing switches sockets etc including 1.5 sqmm copper conductor, standard (green colour earth), PVC insulated unsheathed earth wire to commen earth and connected to earth dolly as specified and directed.

Switch piano, flush type, Single Pole, one way, 6 Amp, 240 Volts (ISI Marked) in repair complete all as specified and directed.

Switch piano, flush type, Single Pole, one way, 15/16 Amp, 240 Volts (ISI Marked) in repair complete all as specified and directed.

Switch piano, flush type, Single Pole, two way, 5/6 Amp, 240 volt (ISI Marked) in repair complete all as specified and directed.

Bell push, flush type, Single Pole, 5/6 Amp, 240 volt (ISI Marked) in repair complete all as specified and directed.

Bell Multi Music Type, AC supply, Single Pole, 240 volt (ISI Marked) in repair complete all as specified and directed.

Socket outlet 2 in 1, 5 pin, 15/16 Amps, flush type, 240 Volts (ISI Marked) in repair complete all as specified and directed.

Socket outlet, 2 in 1, 3 pin, 5/6 Amp, flush type, 240 Volts (ISI Marked) in repair complete all as specified and directed.

Ceiling rose surface bakelite with two or three terminal PVC/Polycarbonate, isolated body (ISI Marked), 240 volts in repair complete all as specified and directed.

Lamp holder, PVC / Polycarbonate type (angle/batten) with back plate suitable for batten fittings in repair complete all as specified and directed.

Stepped type electronic fan regulator, flush type and connecting up, 100 watt, 240 volt (ISI marked) complete all as specified and directed.

Modular switch 6 Amps, 250 Volt, AC, one way, one module (ISI Marked) in repair complete all as specified and directed.

Modular switch 20 Amps, 250 Volt, Single Pole, AC, one way with indicator one module (ISI Marked) in repair complete all as specified and directed.

Modular Socket shuttered, 6 Amps, 250 volts, 2/3 Pin combined, Single Pole, universal India two module (ISI Marked) in repair complete all as specified and directed.

Modular Socket shuttered, 6/16 Amps, 250 volts, 3 Pin combined, Single Pole, two module (ISI Marked) in repair complete all as specified and directed.

Modular Fan Regulator, step type, 120 Watt, 2 module, 250 volts grade, (ISI Marked) in repair complete all as specified and directed.

Modular Metal flush mounting box of 1/2 Module in repair complete all as specified and directed.

Modular Metal flush mounting box of 3 Module in repair complete all as specified and directed.

Modular Metal flush mounting box of 4 Module in repair complete all as specified and directed.

Modular Metal flush mounting box of 6 Module in repair complete all as specified and directed.

Modular Metal flush mounting box of 8 Module in repair complete all as specified and directed.

Modular Metal flush mounting box of 12/16 Module in repair complete all as specified and directed.

White colour modular blanking plate, one module blank in repair complete all as specified and directed.

White colour plates with frame for modular switch of 1 module in repair complete all as specified and as directed.

White colour plates with frame for modular switch of 2 module in repair complete all as specified and as directed.

White colour plates with frame for modular switch of 3 module in repair complete all as specified and as directed.

White colour plates with frame for modular switch of 4 module in repair complete all as specified and as directed.

White colour plates with frame for modular switch of 6 module in repair complete all as specified and as directed.

White colour plates with frame for modular switch of 8 module in repair complete all as specified and as directed.

White colour plates with frame for modular switch of 2 x 6 module in repair complete all as specified and as directed.

MCB Protected Socket (Modular AC Box, Metal clad box) Two Module, Single Pole, 20 Amps, repturing capacity 10 kA and neutral enclosure in sheet steel with a two pin and earth plug and socket including taking down old unserviceable complete all as specified and directed.

Surface and wall mounted 10 watt LED bulk head fitting in engineering plastic housing with clear prismatic diffuser complete with all accessories and connecting up complete with 3 core flexible cable white of size 23/0.0076 including taking down old unserviceble LED fittings complete all as specified and directed.

Decorative ultra slim round profile LED tube light fittings of capacity 9 watt LED 6000 K, basic all purpose surface and wall mounted LED batten with extruded polycarbonate housing & integrated electronic driver including taking down old unserviceble LED fittings complete all as specified and directed.

Decorative ultra slim square profile LED tube light fittings of capacity 18 watt LED 6500 K, basic all purpose surface and wall mounted LED batten with extruded polycarbonate housing & integrated electronic driver including taking down old unserviceble LED fittings complete all as specified and directed.

Decorative ultra slim square profile LED tube light fittings of capacity 20 watt LED 6500 K, basic all purpose surface and wall mounted LED batten with extruded polycarbonate housing & integrated electronic driver including taking down old unserviceble LED fittings complete all as specified and directed.

Sub main wiring with 2.50 sqmm, Single Core, PVC insulated unsheathed multistranded copper conductor Flame Retardant Low Smoke (FRLS) cable 1100 volts grade conforming to IS 694 including 2.50 Sqmm Single Core PVC insulated unsheathed multistranded copper conductor Flame Retardant Low Smoke (FRLS) cable 1100 Volt grade as continuous earth wire in green colour drawn through in existing surface/recessed steel/PVC/steel rigid conduit including taking down old unserviceable submain wiring complete all as specified. Note : Two run of 2.50 sqmm cable and one run of 2.50 sqmm cable as earth wire continuity conductor shall be measured & paid as one unit.

Sub main wiring with 4.00 sqmm, Single Core, PVC insulated unsheathed multistranded copper conductor Flame Retardant Low Smoke (FRLS) cable 1100 volts grade conforming to IS 694 including 4.00 Sqmm Single Core PVC insulated unsheathed multistranded copper conductor Flame Retardant Low Smoke (FRLS) cable 1100 Volt grade as continuous earth wire in green colour drawn through in existing surface/recessed steel/PVC/steel rigid conduit including taking down old unserviceable submain wiring complete all as specified. Note : Two run of 4.00 sqmm cable and one run of 4.00 sqmm cable as earth wire continuity conductor shall be measured & paid as one unit.

Sub main wiring with 6.00 sqmm, Single Core, PVC insulated unsheathed multistranded copper conductor Flame Retardant Low Smoke (FRLS) cable 1100 volts grade conforming to IS 694 including 6.00 Sqmm Single Core PVC insulated unsheathed multistranded copper conductor Flame Retardant Low Smoke (FRLS) cable 1100 Volt grade as continuous earth wire in green colour drawn through in existing surface/recessed steel/PVC/steel rigid conduit including taking down old unserviceable submain wiring complete all as specified. Note : Two run of 6.00 sqmm cable and one run of 6.00 sqmm cable as earth wire continuity conductor shall be measured & paid as one unit.

MCCB, 4 Pole, 63 Amps rating, rupturing capacity 16 kA, 415 Volt grade, AC supply, 50 Hz, thermal Magnetic protection unit and making connections using suitable size copper lugs/thimbles and crimping tool, including disconnecting & taking down old unserviceable MCCB, complete all as specified & directed.

MCCB, 4 Pole, 100 Amps rating, rupturing capacity 16 kA, 415 Volt grade, AC supply, 50 Hz, thermal Magnetic protection unit and making connections using suitable size copper lugs/thimbles and crimping tool, including disconnecting & taking down old unserviceable MCCB, complete all as specified & directed.

MCCB, 4 Pole, 125 Amps rating, rupturing capacity 16 kA, 415 Volt grade, AC supply, 50 Hz, thermal Magnetic protection unit and making connections using suitable size copper lugs/thimbles and crimping tool, including disconnecting & taking down old unserviceable MCCB, complete all as specified & directed.

MCB, Single Pole, 6 to 32 Amps rating, with over load and short circuit protection 'C' curve and rupturing capacity 10 kA, 240 Volt grade, AC supply, 50 Hz and making connections using suitable size copper lugs/thimbles including complete, all as specified & directed.

MCB, SPN, 40 Amps rating, with over load and short circuit protection 'C' curve and rupturing capacity 10 kA, 240 Volt grade, AC supply, 50 Hz and making connections using suitable size copper lugs/thimbles, including disconnecting & taking down old unserviceable MCB, complete all as specified & directed.

MCB, TP, 63 Amps rating, with over load and short circuit protection 'C' curve and rupturing capacity 10 kA, 415 Volt grade, AC supply, 50 Hz and making connections using suitable size copper lugs/thimbles, including disconnecting & taking down old unserviceable MCB, complete all as specified & directed.

MCB, TPN, 63 Amps rating, with over load and short circuit protection 'C' curve and rupturing capacity 10 kA, 415 Volt grade, AC supply, 50 Hz and making connections using suitable size copper lugs/thimbles, including disconnecting & taking down old unserviceable MCB, complete all as specified & directed.

Sheet metal enclosure powder coated single phase DB SPN 4 ways and neutral 240 Volts, AC supply, 50 Hz, with 200 Amps rated bus bar Double Door (IP-43 IK 09 with metal door) suitable for fixing of MCBs including fixing of lugs in main incomming and outgoing line and fixing of cable glands of suitable size including grouting flush in the wall by means of nuts, bolts, angle iron and making good disturbed surfaces including taking down old unserviceable DB complete all as specified and directed.

Sheet metal enclosure powder coated single phase DB SPN 8 ways and neutral 240 Volts, AC supply, 50 Hz, with 200 Amps rated bus bar Single Door (IP-43 IK 09 with metal door) suitable for fixing of MCBs including fixing of lugs in main incomming and outgoing line and fixing of cable glands of suitable size including grouting flush in the wall by means of nuts, bolts, angle iron and making good disturbed surfaces including taking down old unserviceable DB complete all as specified and directed.

Sheet metal enclosure powder coated single phase DB SPN 12 ( ways and neutral 240 Volts, AC supply, 50 Hz, with 200 Amps rated bus bar Single Door (IP-43 IK 09 with metal door) suitable for fixing of MCBs including fixing of lugs in main incomming and outgoing line and fixing of cable glands of suitable size including grouting flush in the wall by means of nuts, bolts, angle iron and making good disturbed surfaces including taking down old unserviceable DB complete all as specified and directed.

Sheet metal enclosure powder coated single phase DB TPN 4 ways and neutral 415 Volts, AC supply, 50 Hz, with 200 Amps rated bus bar Double Door (IP-43 IK 09 with metal door) suitable for fixing of MCBs including fixing of lugs in main incomming and outgoing line and fixing of cable glands of suitable size including grouting flush in the wall by means of nuts, bolts, angle iron and making good disturbed surfaces including taking down old unserviceable DB complete all as specified and directed.

Flameproof Fluorescent luminaire, Tube light fitting, 1 X 16 watt including LED tube, flame Proof, CMRI certified recommended for gas vapor group of IIA & IIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver, holder, connector block, etc and all accessorie pre-wired and incuding connecting up with twin core twisted flexible copper conductor cable with suitable size including disconnected & taking down old unserviceable light complete all as specified and directed.

LED Panel 36 watt with 2ft x 2 ft slim panel 595X595mm with super bright recess mounting LED Slim ceiling light with white powder coated extruded aluminium housing and highly efficient light smoothing optics to deliver superior illumination including LED driver and fixing in recess ceiling suitable size of aluminium strip size as required for fixing of LED fitting complete with all accessories prewired fixed on ceiling and connecting up complete with 3 core flexible cable of size 23/0.0076 including taking down old unserviceable fittings complete all as specified and directed.

Single phase electronic energy meter with LCD display of rating 5-30 Amp class 1.0, 240 Volt, 50 Hz counter type display with transparent hinge including connection from SPN to meter with 6 Sqmm copper stranded conductor including earth wire including disconnecting & taking down old unserviceable meter complete all as specified and directed.

Supply, install, testing and commissioning of LT panel size 800 mm x 600 mm x 150 mm enclosures cubical weather and vermin proof totally enclosed made out of 1.60 mm thick CRCA sheet machine pressed of suitable size to operate on 3 phase 4 wire system 415 Volts, 50 Hz double door with front openable and PVC acrylic glass cover suitable size for checking of meter reading without opening door with locking arrangement incl inner shutters for mounting switch gear etc, suitable arrangement for fixing of electrical meter and SPN 40 to 63 Amp including pre wiring from Bus bar to Meter and Meter to MCB SPN (for pre wiring use 6.00 Sqmm Single core copper cable and suitable size of lugs for connecting from Busbar to meter and meter to MCB SPN) including bottom gland plate with sufficient numbers of circular cable entry holes, including disconnected and taking down old panel and prewired complete as per drawing with masonary work for fixing in wall duly powder coated with comprising of the following :- INCOMING: (i) MCCB 63 Amps 4 Pole, 415 Volt, repturing capacity 25 kA, adjustable thermal & fixed magnetic setting - 01 Nos. (ii) Phase indicating lamp LED type with HRC fuse – 1 Set of three. (iii) ON/OFF indicating lamp on incomer feeder for status of feeder - 02 Nos (iii) Aluminium bus bar 200 Amps capacity with bus bar supports, DMC/SMC insulators of CPRI approved of suitable length insulated heavy heat shrinkable sleeves etc - 04 Nos. OUTGOING (i) MCB SPN 32 Amp, 415 Volt grade, repturing capacity 10 kA - 04 Nos, (ii) Single phase electronic energy meter with LCD display of rating 5-30 Amp class 1.0, 240V 50 Hz counter type display with transparent hinge including connection from SPN to meter with 6 Sqmm copper stranded conductor including earth wire complete all as specified and directed - 04 Nos

Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level and connected to and including galvanized iron earth wire 4mm dia by means of GI nuts, bolts, check nuts, washers thimbles, etc as shown in electrical plate No. 3 of SSR Part-I and connection to main switch board/Test point/ panel/ equipment and testing on completion including excavation and earth work in any type of soil, returning filling in, and removal of surplus spoil to a distance not exceeding 50 metre, charcoal and salt in alternate layer 15cm thick all around the earth plate electrode, Mild Steel Funnel with wire mesh, 20mm bore, GI pipe medium grade, 1.50 metre long for watering and 15mm bore, GI pipe light grade, 7.50 metre long for earth wire protection fixed with poles with two clamps, made from MS flat 25 mmx3mm, bolts, nuts and washers, PCC chamber (1:2:4) type B-1, using 20mm graded stone aggregate with angle iron 40x40x5mm frame 60mm thick RCC cover with 6mm steel bars 100mm centre to centre both ways etc including dismantling & taking out old existing unserviceable earthing complete all as specified & as directed. Note : (i) PCC chamber shall be constructed at least 1.5 mtr away from the earth electrode and pipe for watering shall be provided in slanting manner. (ii) If earth resistance of earthing is not found satisfactory it will be redone by the contractor on his risk and cost.

LED Adore 10 watt base capacity B22, STAR Lamp lumen output 950, color temp 6500K in repair complete all as specified and directed.

LED Adore 15 watt base capacity B22, STAR ball Lamp lumen output 1425, color temp 6500K in repair complete all as specified and directed.

Switch flame proof rotary type with termination box in LM6, 6/16 Amps, Single pole, 250 volts grade, AC supply, 50 Hz in repair complete all as specified and directed.

S.D. And Company

M/s Shree Construction Company

Manisha Enterprises

M/s Ramesh & Company

S R ENTERPRISES

M/S PRASHANT BENIWAL

Leelashah Enterprises