REPAIRS TO FLOORING , ROOF SHEET, JOINERY, GI AND SANITARY FITTINGS AND OTHER B/R WORKS IN OTM ACCN FOR NCC OTA AT AREA-II UNDER AGE B/R-II AT GE KAMPTEE

Amount

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete /sub base complete all as specified and directed.

M&L for 75mm thick cement concrete 1:2:4 type B2 (using 20mm graded stone aggregate) as in PCC path/hard standing finished fair and even complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size conforming to IS15658-2006 of 60mm thickness M-35 grade with grey cement and pigment finished with coloured rubber finish on top finished over sand dust cushion of 30mm thick complete all as specified and directed. Note: Sand cushion will be measured and paid separately.

M&L for sand filling under cushion of paver blocks complete all as specified and directed.

M&L for chequered tiles 300 x 300 x 25mm thick, rubber finished, set jointed and pointed in neat and cement slurry in floors with grey cement and pigment complete including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for providing cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in copings, plinth courses including weathering, slightly rounded or chamfered angles and throating on edges complete all as specified and directed.

Dismantling of asbestos cement (Corrugated, semi corrugated etc.) of any thickness including ridges hips valleys as in roof covering complete all as specified and directed.

Dismantling of timber fillets, rails, posts, rafters, purlins under 40 Sq cm in section complete all as specified and directed.

S&F mild steel work such as roof trusses (framed), trussed, purlins and heavy bracket framing (Beam, Tee, angle, Channel or flat section) including distance pieces, cleat etc confirming to Fe 410-W (Gde-E- 250) quality A complete all as specified and directed.

M&L for 0.50mm thick prepainted galvalume aluminium zinc coating G.I. based corrugated steel sheet of any colour having tensile strength of 550 MPA as in roof covering, fixed with and including self tapping screw as per manufacturer instructions complete all as specified and directed.

M&L for 0.50mm thick prepainted galvalume aluminium zinc coating G.I. based plain steel sheet of any colour having tensile strength of 550 MPA as in ridges/ valley, fixed with and including self tapping screw all as per manufacturer instructions complete all as specified and directed.

Dismantling of floor, hearth or wall tiles including cement mortar bedding, but not backing complete all as specified and directed.

M&L for coloured glazed ceramic tiles in vertical surface 300x 450x 6-7mm thick set and jointed in neat cement slurry and pointed in site or color cement to match including rendering 10mm thick in cement mortar 1:4 complete all as specified and directed.

M&L for scratch free light shade vitrified ceramic tiles 10mm thick (square/ rectangular), polished, area of each tiles not exceeding 0.36 sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and as directed.

All as per item No 15 above but as in skirting with 10mm backing in cement mortar 1:4 complete all as specified and directed.

M&L for joint free coloured non skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15mm thick screed bed of cement mortar (1:6) etc complete all as specified and as directed.

S&F in repair 110mm dia PVC (SWR) pipes single socket in any length with rubber joint laid in trenches or in floors complete all as specified and directed.

S&F in repairs 110mm dia PVC (SWR) bends any radius complete all as specified and directed.

Taking down existing water proofing treatment including PCC padding, mortar etc and disposal of rubbish outside of MD land and hacking for key, scrubbing down with water complete all as specified and directed.

M&L for provision of water proofing treatment by using APP torch on non woven polyster film reinforcement with 3mm thick and weight not less than 3.50 kg/sqm over roof and vertical surfaces including preparation of surfaces and applying oil based bituminous primer coat @ 0.30 ltr per sqm on clean and dry surface and then providing APP membrane laid with 100mm over lap on both sides all as per manufacturer's instructions including 15mm thick screed bed in CM 1:4 and aluminium paint of 0.2Kg/Sqm over membrane complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards/ slabs/ blankets any thickness and wall paneling including cover fillets complete all as specified and directed.

M&L for GI powder coated snap grid framework for false ceiling comprising of the following section for making partition of 600x600 mm size fixed to wall with rawl plug and screw and hanged to roof with 4mm dia GI suspended wire of suitable length and butterfly clip of size of main Tee shall be 32mm x 15mm x 0.30mm, cross tee shall be 32mm x 15mm x 0.30mm thick with black lining in mid portion and wall angle shall be 24mm x 24mm x 0.30mm thick complete all as specified and directed.

M&L for 4mm thick non asbestos, fibre cement building board of size 595 x 595mm size in ceiling fixed or laid/ inserted to timber/ GI/ aluminium framework with screws complete all as specified and directed. Note:- GI frame work will be measured and paid for separately.

M&L for 5mm thick plain colour PVC sheet in strips & channel feathered at the edges for fixing on solid PVC wall lining, insulated PVC wall lining and solid PVC partitions inclusive of solvent cement and fixing at site complete all as specified and directed.

M&L for 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and directed.

S&F in repair pillar taps 15mm bore dia cast copper alloy with capstan heads, chromium plated, fancy type screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwd shank and fly nut screwd for iron pipes, fancy type complete all as specified and directed.

S&F in repairs stop valve/angle cock 15mm dia cast copper alloy chromium plated fancy type high pressure with crutch or butter fly handle screwed for iron pipe or union and fixed complete all as specified and directed.

All as per item No 26 above but concealed type complete all as specified and directed.

S&F in repairs vitreous china wash down water closet (pedestal pattern) 'P' or 'S' trap including jointing including plastic water closet seat, closed pattern with flat bottom and cover and mild steel CP or aluminimised hinging device complete all as specified and directed.

S&F in repairs vitreous china squatting pan Orissa pattern 580 x 440mm long with integral foot rest, S or P trap including connection to trap and to flushing pipe etc complete including making good to floor complete all as specified and directed.

S&F in repair vitreous china urinal, half stall pattern, white (excluding flushing cistern, flush pipe and waste pipe) including connections to flushing pipe and urinal spreader complete all as specified and directed.

S&F in repairs wash hand basin (flat back or angle back) of size 550 x 400mm white including coupling, waste pipe, chain and plug, porcelain stopper including for & pinning in ends of brackets including supply & fixing of waste pipe complete all as specified and directed.

S&F in repairs 10 ltr capacity PVC valve less symphonic action type flushing cistern low level, white with inlet ball valve float and handle including bracket etc complete all as specified and directed.

S&F chromium plated shower rose with or without swivel joints of 125mm dia incl fixing to 15mm bore of pipe complete all as specified and directed.

S&F in repair health faucet of 15mm bore brass cromium plated including PVC pipe to connection GI tubing 15mm bore complete all as specified and directed. Make: Shakti cat No :SB 9101 or equivalent

S&F in repairs towel rail 20mm dia 600mm long of chromium plated fixed with and including chromium plated brass screws and wooden/ plastic cleats complete all as specified and directed.

S&F in repairs 15mm dia bib tap cast copper alloy chromium plated fancy type with crutch or butter fly handle screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs 15mm dia bib tap of PTMT any colour high pressure screwed for iron pipe (Minimum weight 15mm -90 gms) complete all as specified and directed.

S&F in repair 15mm bore stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (minimum weight 90gms) complete all as specified and directed.

S&F in repair 15mm bore Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight15mm-110gms) complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F in repairs plastic water closet seat, back, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair corrugated waste pipe of size 32x 800mm for kitchen sink and wash basin etc complete all as specified and directed. Make: Shakti Cat No SB-1327 or equivalent

S&F in repairs PTMT shelf 450mm long fixed to plugs with chromium plated brass screws complete all as specified and directed. Make: Shakti Cat No SB 1191 or equivalent

S&F in repairs 20mm dia stainless steel curtain rod of approved quality including cutting and fixing to curtain brackets complete all as specified and as directed.

S&F fancy type curtain brackets of approved quality fixed to wall with screws complete all as specified and directed.

S&F 32mm waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F GI tubing 15mm bore medium grade with all fittings and fixed to wall including taking up or down existing GI tubing complete all as specified and directed.

S&F GI tubing 20mm bore medium grade with all fittings and fixed to wall including taking up or down existing GI tubing complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 500 ltr capacity hoisted and fixed in position including PTMT including ball valve of 20mm dia and top cover including dismantling of water tank as specified in SSR Part I complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 ltr capacity hoisted and fixed in position including PTMT including ball valve of 20mm dia and top cover including dismantling of water tank as specified in SSR Part I complete all as specified and directed.

S&F in repairs 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight 20 mm -210 Gms) complete all as specified and directed.

S&F in repairs stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18mm as in gauze door /window/ ventilators shutters complete all as specified and directed.

Demolition of brick work built in cement mortar incl all quions, arches, pillar but excluding ashalar facing etc complete all as specified and directed.

M&L for brick work with fly ash bricks old size, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

Taking down cement or cement lime plastering including roots of trees and trees any girth desription on brick or stone wall etc including raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick on brick or concrete surfaces in CM 1:6, finished fair and even complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint over a coat of white wash complete all as specified and directed.

M&L for preparation of plastered surfaces of wall & applying three coat of white wash complete all as specified and directed.

S&F in repairs 150mm extruded aluminium handles fabricated type anodised etc complete all as specified and directed.

S&F in repairs 150mm long aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F in repairs 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed.

S&F in repairs 300mm mild steel helical door spring ordinary rat tail rod including roller and roller plate complete all as specified and directed.

Taking down door / window frame with shutter (without taking off shutter from the frame) area not exc 1.5 sqm complete all as specified and directed.

Taking down door / window frame with shutter (without taking off shutter from the frame) area exc 1.50 sqm but not exc 4 sqm complete all as specified and directed.

Taking down shutter of any description exc 1 Sqm but not exc 2 Sqm each and removing from site complete all as specified and as directed.

All as per item No 66 above but size exc 2.00 Sqm complete all as specified and directed.

S&F flush shutters solid core construction with block board core and plywood face panels commercial type on both sides 30mm thickness complete all as specified and directed.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 4mm thick moulded PVC sheet on the front face & 4mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F factory made solid PVC panelled door shutter 30mm thick, but wire gauzed i.e. panel will be of wire gauze in lieu of wood grain printed PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, supplying & fixing in opening as per complete all as specified and directed.

S&F factory made solid PVC panelled door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having PVC sheet strip of 20mm width struck inside with solvent cement for styles and palin colour PVC sheet for Top rail : panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the style and rail with suitable PVC sheet beading and jointed together with solvent cement etc fixed with frame at site complete all as specified and directed.

M&L for MS framed work of Fe-290(Gde E-165) as in doors or gates of angle or other section with gusset plates, rails, braces, MS Plates etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete etc complete all as specified and directed.

S&F 1.00mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

S&F 100mm long mild steel medium weight cold rolled butt hinges and fixed with screw/ welded to frames etc complete all as specified and directed.

S&F 150mm extruded aluminium handles fabricated type anodised etc complete all as specified and directed.

S&F 150mm long aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed.

Hacking out old broken glass (any thickness size and quality and description) from wooden/ steel frames glazed with putty or fixed with beads etc complete all as specified and directed

S&F 4mm thick sheet glass ordinary quality not exc 0.50 sqm each pane and fixed with oil putty or with wooden beading in square etc complete all as specified and directed.

All as per item No. 80 above but figured glass complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18mm as in gauze door /window/ ventilators shutters complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth & applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preaparation of new steel surfaces of any description over 10 cm width or girth & applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for two coats of brush bond liquid compound of Make: Sika/ Fosroc (Sika / Fosroc chemical Ltd) or its equivalent water proofing coating over plastered surfaces of any portion all as per manufacturer's instructions complete all as specified and directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.)[(-) Rs.47,250.00]

M/s Jagdish Staioners and General Stores

DEESHA CONSTRUCTIONS

NORTH INDIA PEST CONTROL

M/s M.G. Hargunani

M/s DS Khekde

Bidder Name

DEESHA CONSTRUCTIONS

M/s DS Khekde

M/s Jagdish Staioners and General Stores

M/s M.G. Hargunani

NORTH INDIA PEST CONTROL

Varsha G Nagphase