WBPWD/EE-WKED/NIQ-36/2019-20 (2nd call)

Amount

Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board

Supplying & Fixing bulk head light fitting (Havells make) with die cast aluminium housing & frosted glass on wall/ceiling incl. S&F 8watt CFL complete set.

Supplying & Fixing iron beam fan clamp of two piece type, as per approved specification, fabricated from 40 mm x 9 mm MS sheet flat suitable for beam having flange upto 150 mm wide

Supplying and fixing 415V, TPN SFU with sheet steel enclosure on flat iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. (L&T or equivalent as approved by EIC)

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection. (Legrand/Siemens or equivalent as approved by EIC)

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection (Legrand/Siemens or equivalent as approved by EIC)

Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection (Legrand)

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. (Legrand/Simens)

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. (Legrand/Siemens)

Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachmen. (Legrand/Siemens)

Supplying & Fixing CRC sheet metal (16 SWG) JB-cum- Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. bakelite/Perspex/coloured Perspex (wall matching colour) top cover 3 mm thick flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works

Supply & Fixing 240 V 6 A Piano key type switch (Brand approved by EIC) on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

6A Piano Key type Switch

16/20A Piano Key type Switch

6A Piano Key type Socket

16/20A Piano Key type Socket

Socket type, Step type Electronic Fan Regulator

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required

3x1.5 Sq mm

2x2.5 +1x1.5 Sq mm

Distribution wiring in 3 x 1.5 sqmm single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 3 nos. suitable size “Ph, N & E” copper bar incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish

Avg. Run 6 m

Avg. Run 9 m

Supply and Laying of PVC Armoured Aluminium cable incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting

i) 3x4 Sq mm (Compound Light)

ii) 3x10 Sq mm (TPN to SPN)

iii) 4x25 Sq mm (VTPN to HTPN)

Supplying and Laying of one No. PVC Armoured Alluminium cable in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed.

i) 3x4 Sq mm (Compound Light)

ii) 3x10 Sq mm (TPN to SPN)

iv) 4 x 50 Sq mm (Panel to VTPN)

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry and Finishing cable ends bysoldering with cable sockets and insulated tapes etc., includingsupplying sockets, soldering materials, tapes etc. and makingconnection to switch, BDB and BBC etc. of XLPE/PVC armoured cables as below :

3x4 Sq mm

3x16 Sq mm

4x25 Sq mm

4x50 Sq mm

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required

25 mm dia

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level by ISI-Medium GI pipe.

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages.

Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint

S&F of LED Tube fittings (Make- Philips, Cat no. TMC-501 1x18W LED or equivalent Havells/Crompton) fixed on round block on wall as per direction of EIC (at Store Office)

Supply and Fixing of 10W LED street light fittings with necessary arrangement including connection and arm bracket painting ( Make: Philips/ CG/Havells Equivalent approved by EIC)

Dismantling of old switch boards, and wirings etc and mending good the damages including cleaning and clearing the rubbish from site as per direction of EIC.

Supply and Fixing of AC Ceilig Fan 1200mm Sweep in existing Down rod including necessary connections as required as per direction of EIC. (Orient, Crompton or equivalent as approved by EIC)

Dismantling of old switch boards, and wirings etc and mending good the damages including cleaning and clearing the rubbish from site as per direction of EIC. (Gym)

STANDARD BUILDERS

Netaji Engineers CO-Operative Society Ltd.

K. C. BYSACK AND SONS

UNITED CONSTRUCTION SERVICE