CLEANING AND MAINTENANCE OF SEWAGE LINE MANHOLE REPAIR TO CHAIN LINK FENCING BOUNDARY WALL CONCERTINA COIL WITH ANGLE FOOTPATH CULVERT DRAIN ETC UNDER AGE BR I AT BAMRAULI

Amount

Cleaninig of septic tank and raw sewage by mechanically or Manually of any size by taking out Mud/Sludge from septic tanks of any depth including dewatering in foul conditions and confined places, getting out and removing the sludge to a distance exc 250m and n exc 500m and depostited where directed in excavated borrow pit and including excavation of borrow pits and covering the borrow pits with 10cms thick layer of soil including spreading of bleaching powder before and after covering the borrow pit with soil to maintain hyzenic enviroment complete all as specified and directed.

All as per item No.1 above but from manhole of depth n exc 1.5 mtr complete all as specified and directed.

All as per item No.1 above but for from manhole of depth n exc 1.5 mtr complete all as specified and directed.

Cleaning of blockage manually by rodding pumping etc and removing the deposited sludge/sold/liquid material and removing to out side MOD land completed all as directed from water closet (IWC/EWC) trap & CI pipe line upto first manhole complete all as specified and directed.

Cleaning & removing all scale & dirt, etc., from tanks of capacity exc 250 ltrs and n exc 500 ltrs & from mouths of circulating pipes, etc. complete all as specified and directed.

Cleaning & removing all scale & dirt, etc., from tanks of capacity exc 500 ltrs and n exc 1000 ltrs & from mouths of circulating pipes, etc. complete all as specified and directed.

Cleaning of underground sewage line of any dia including manholes of any description and any depth by removing any type of blockage including de sitiling and de chocking manually by providing rodding and flushing with water after cleaning including cleaning of manhole by removing sludge site solid etc and refixing all as directed and full sartisfaction complete all as specified and directed.

S&F in repairs 20mm Ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed. (Minimum weight 20mm--210 gms)

M& L for demolition of reinforced cement concrete any description complete all as specified and directed.

M&L for pre-cast cement concrete type B-1 (1:2:4) (using 20mm graded aggregate) as in manhole cover slabs set in cement mortar 1:6 including necessary formwork complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed.

Excavation in trenches n. exc 1.5m wide and n exc 1.5m deep and getting out in hard/ dense soil.

M&L for 100mm thick Cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

Returning, filling in excavated approved earth in to trenches around pipe etc after laying of pipes and testing complete including watering and well ramming in 25cm layers complete all as specified and directed.

Removing surplus spoil to a distance not exc 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified.

M&L for concrete bed to drain pipe 150mm bore laid to falls including packing under & haunching against the sides of pipes after they are laid and tested, in cement concrete 1:3:6 type D-2 (using 40mm graded crushed stone aggregate) complete all as specified and directed. (UNSV Pipe through away Low laying area)

Demolition and breaking up drain pipes 100mm/150mm/300 dia salt glazed ware, (SWG/AC/PVC/NP) or reinforced concrete) set in cement mortar complete all as specified and directed.

M&L for Salt glazed stone ware (SGSW) grade 'A' pipes 150mm bore laid and jointed on concrete bed complete. Including testing all as specified.

Dismantiling of brick work or stone/boulder masonry built in cement mortar incl all quoins, arches, pillars etc but excluding ashlars facings dressed stone work and forecast concrete articles, complete all as specified and directed.

M&L for brick work with sub-class 'B' bricks, straight or curved on plan exceeding 6M mean radius, built in cement mortar 1:6 complete all as specified and directed.

M&L brickwork with subclass "B" bricks straight or curved on plan 'to any radius in half brick wall built in CM 1:4 complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in benching including weathering slightly rounded or chamfered angles including necessary form work and mixing of integral water proofing compound as per manufacturer's instructions complete all as directed. (Water proofing compound shall be measured and paid separately).

Supply only integral water proofing compound.

Taking down cement plaster on brick or stone walls, etc, incl raking out joints, hacking for key, scrubbing down with water, etc & prepare to receive new plaster complete all as specified and directed

M&L for rendering 15mm thick cement plaster on brick masonry surfaces in cement mortar 1:4 finished to even & smooth surfaces (without using extra cement) including mixing of integral water proofing compound in the proportion as mentioned in manufacturer's instructions, complete all as specified. (Water proofing compound to be measured and paid for separately as supply only).

S&F for PTMT grating doom 100mm dia including removing the old grating (minimum weight- 25 gms) complete all as specified and directed.

M&L for extra forming fair finished drain or chanels 30 cm girth in cement concrete using extra cement including foms moulds mitred stopped ends etc complete all as specified and directed.

M&L for Add/deduct for each 25mm girth or part there of overor under 30 cm girth complete

Cutting in to existing man holes for connecting new drains, making good to pipes and rendering cutting out existing banching & forming branch channel in cement cocrete 1:2:4 type B-1 smooth finished and reforming benching as required for 150/200mm pipe complete all as specified and directed.

S&F in Rep PVC (SWR) vent cowel 110mm dia/size complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed

S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed

S&F of 75 mm bore PVC (SWR) branch piece single 'Y' equal or unequal complete all as specified and directed

S&F of 110 mm bore PVC (SWR) branch piece single 'Y' equal or unequal complete all as specified and directed

S & F of 75mm bore PVC (SWR) junction single 'T' equal or unequal complete all as specified and directed

S & F of 110 mm bore PVC (SWR) junction single 'T' equal or unequal complete all as specified and directed

S & F of 75 mm bore PVC (SWR) Vent cowl complete all as specified and directed.

S & F of 110 mm bore PVC (SWR) Vent cowl complete all as specified and directed.

S & F of 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed

S & F of 110 mm dia(SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed

S&F in repair plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S&F in repair Plastic water closet seat, coloured, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S&F in repair PVC water tank cover with fittings suitable for upto 1000 litres capacity complete all as specified and as directed.

Vitreous china wash down water closet pan (pedestal pattern) white (excluding flushing cistern and flush pipe) and including fixing of the following components viz. pedestal pan with "P" or "S" trap, seat and cover for pedestal pan, flushing cistern, brackets, chain and pull or lever handle, flushing pipe including jointing to socket of flushing rim and connecting pipe to union of flushing cistern, inlet and overflow pipe, anti-syphonage pipe or stopper fixed as in repairs complete all as specified and as directed. Note:- Flushing cistern and flush pipe as required shall be measured and paid for under supply only separately.

Vitreous china sqatting pan, "Orissa" pattern, size 580mm x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) and including fixing of the following components viz. squatt pattern pan with loose cast iron or vitreous chinaware, "P" or "S" trap, seat, flushing cistern, brackets, chain and pull or lever handle, flushing pipe including jointing to socket of flushingrim and connecting pipe to union of flushing cistern, inlet and overflow pipe, anti-syphonage pipe or stopper, setting the trap in and pan in lime concrete, 150mm minimum thickness and finished just below level of rim of pan to receive floor finishing fixed as in repairs complete all as specified and as directed. Note:- Flushing cistern and flush pipe as required shall be measured and paid for under supply only separately.

Vitreous china wash basin, white, flat back, size 550mm x 400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets and including fixing of the following components viz. pillar taps, waste fittings and union, plugs and chains and connecting upto supply pipes, wastes or traps, screws, plugs, cement mortar and other subsidary materials required for fixing including cutting for and pinning in ends of brackets but exclusive of fixing of supply and waste pipe fixed as in repairs complete all as specified and as directed. Note:-(a) Pillar taps and waste fittings as required shall be measured and paid for under supply only separately. (b) Supply and waste pipes as required shall be measured and paid for separately.

Supply only PVC valveless, syphonic action type flushing cistern 10 litres capacity low level, white with inlet, ball valve, float and handle, including brackets complete all as specified and as directed.

S&F in repair Health faucet, brass, chromium plated with pipe length 1200mm, washers, connections etc. complete all as specified and as directed.

Supply only pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe of bore of pipe 15mm fixed all as specified and as directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F in repair Stop valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of bore of pipe 15mm all as specified and as directed.

S&F in repair 15 mm Bib tap long body with wall flange fancy type chromium plated brass screwd for iron pipe with capstain head complete all as specified and directed

S & F in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

S & F in repairs 75MM PVC Nahani trap, setting and jointing with solvent cement and fixed in Cement concrete type B-1 (1:2:4) complete all as specified and directed

Cutting holes in brick walls in cement for inserting holdfasts & making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed

S&F for framed work such as grills, gratings framed & hung/sliding as gates, including pintle hinges, stop, hand made sliding bolts, etc., with ends of bar shoulder &/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks , drain cover & similar work conforming to Fe 290 GDE -E-165 complete all as specified and directed

M&L for preparation of new surfaces of steel of any description over 10cm grith or width, not otherwise described with one coat of red oxide followed by two coats of synthetic enamel paint complete all as specified and directed.

Dismantling wrought iron work of any description not otherwise provided complete all as specified and directed.

M&L for glass coping on top of walls ® CM 1:3 complete all as specified and directed

M&L for Welding in repair thickness of metal to be welded exc 6mm but nexc 9mm size of length exc 2.5 cm but n exc 5 cm in length complete all as specified and directed.

S&F for MS works as of angles or tees,fixed independently cut to shape drilled including bending and welding angles of grade 410-FE including Dismantling all as specified and directed

S&F in repair punched tape concertina coil as per IS 4454 with galvanised coating thickness of 230mm Gm/Sm and punched tape as per IS 513 deep drawn quality with a galvanising coating thickness of 12 micron minimum having 50 nos of fixed in position and secured to both sides of shaped angle iron post with 2.642mm GI wire (concertina coil weighting 15Kg approx per coil stretchable to 8 to 9m length complete all as specified and directed.

S&F in repair Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strainging bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or stel pins, etc. complete all as specified and directed (each line wire to be measured).

M&L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete including Dismantling complete all as specified and directed.

M&L for preparation of new surfaces of steel of any description over 10cm grith or width, not otherwise described with one coat of red oxide followed by two coats of synthetic enamel paint complete all as specified and directed.

M&L PCC 1:3:6 type C1 (20mm gr agg) as in anchoring angle iron/hold fast bed plate etc above compound all or any position all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work, surfaces finished even and fair without using extra cement complete all as specified and directed.

M&L for Preparation of new plastered surface of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

Dismantling floor,hearth or wall tiling incl cement mortar bedding but not backing and rubbish off the premises complete all as specified and directed.

M & L for chequered cement concrete with tiles of size 20cm x20cm x 25 mm thick screed bed in CM 1:6 set jointed and pointed in neat cement slurry and pointed with coloured cement to match complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness M-40 grade laid over including 25mm thick sand cushioning including filling of joints with sand with grey cement pigment complete all as specified and directed.

M & L non-skid Heavy duty endura tile 18 to 22 mm thick area exc 0.13 but not exc 0.20 Sqm coloured joint free in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:4 complete all as specified and directed. (Make :Johnson Endura/ Somany or equavalent).

S&F RCC NP-3 Hume pipe dia 300mm complete all as specified and directed.

Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material.

MOHAMMAD RIZWAN CONTRACTOR

VIPUL CONSTRUCTIONS

oasis contractor builder and supplier

M/s M A Traders

Mohit Enterprises

M/S SATISH KUMAR

R K CONSTRUCTION COMPANY