Construction of R.C.C. Culvert at Rajwaha Near Gram Buwada Kalan Devi Mendir.

Dewatering of foundation, trenches by 5 HP diesel oprator pumps including all labour materils, T&P etc. complete work (Taking unit 1Hrs per Pumps) Including Labour Cess But Excluding GST

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling withm approved material.

Plain Cement Concrete in open foundation complete as per Drawing and Technical Specifications (Grade M15) Excluding GST.

Reinforced Cement Concrete in Foundation complete as per Drawing and Technical Specifications (RCC Grade M30) Excluding GST.

Reinforced Cement Concrete in Foundation complete as per Drawing and Technical Specifications (RCC Grade M35) Excluding GST.

Supplying, fitting and placing HYSD bar reinforcement in super-structure complete as per drawing and technical specifications Excluding G.S.T.

Providing and laying reinforcement Cement concrete approch slab including reinforcement complete as per drawing and Technical Specifications. Excluding G.S.T.

Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications. Excluding G.S.T.

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 110 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications. Excluding G.S.T.

Drainage Spouts complete as per drawing and Technical specification. Excluding G.S.T

Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2 of MoRTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and Technical Specification. Excluding

Brick masonry work M-150 bricks in cement mortar 1:3 in foundation complete excluding pointing and plastering as per drawing and technical specifications.

Construction of Patri on both side of the road with Carted Earth Cartage of Earth 5.00 Km with all lift and lead, transporting to site, spreding grading to required slope and compacting as per SI No 253 & 261 (C). But Excluding GST

Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401. Excluding G.S.T..

Providing, laying, spreading and compacting stone aggregates of specific sizes to Water Bound Macadam Sub-base/Base (WBM Grading 2) specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 405 Excluding G.S.T.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam (WBM Grading 3) specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. Excluding G.S.T.

Providing and applying primer coat with bitumen emulsion (MS) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means as per Technical Specification Clause 502 Excluding GST

Providing and applying tack coat with Bitumen VG-10 grade using Bitumen pressure distributor at the rate of 0.30 kg per sqm on the prepared Primed surfaces cleaned with Hydraulic broom as per Technical Specification Clause 503. Excluding GST

Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or cut-back or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades. Excluding G.S.T.

Providing and laying seal coat by manual means with VG-10 Grade Bitumen sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510 Exluding GST

M-150 Brick on edge pavement on parties with bricks, laid dry joints filled with local sand including preparation of base to proper slope, and its ramming, spreading layer of 1 cm. (3/8") depth of local sand over the subgrade and including supply of all materials, labour Tools &plants etc. required for proper completion of the work. Excluding GST

Retro-reflectorised Traffic sign as per IRC 67-2012 Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC 67:2012 made of high intensity grade sheeting vide clause 801.3, fried over aluminum sheeting type-IV 1.5 mm thick supported on a mild steel angle iron post 75mm x 75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm below ground level as per approved drawing. The retro-reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67: 2012 & proof of the same in form of government report shall be uploaded with quoting tender.(Excluding GST) (a) 90 cm equilateral triangle with diffinitation plate size (20 cm x 60 cm)

Retro-reflectorised Traffic sign as per IRC 67-2012 Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC 67:2012 made of high intensity grade sheeting vide clause 801.3, fried over aluminum sheeting type-IV 1.5 mm thick supported on a mild steel angle iron post 75mm x 75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm below ground level as per approved drawing. The retro-reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67: 2012 & proof of the same in form of government report shall be uploaded with quoting tender.(Excluding GST) (b) 30 x 90 cm (Left/Right) Object Hazard