SPL REPAIR TO BLDG NO T-05, T-51 (JCOs/OR LIVING ACCN), T-56 AND T-57 (JCOs/OR TOILET BATHROOM BLOCK) AT POONCH SPL REPAIR TO BLDG NOS P-50 AND T-09 AT FSD K NALLAH IN THE AOR OF AGE B/R-II AND AGE B/R-III UNDER GE 881 EWS

Amount

Dismantling of plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering, complete all as specified and directed.

Dismantling of timber scantling 40sqcm and over in section unframed work,as in any position, complete all as specified and directed.

Dismantling of timber scantling under 40sqcm and over in section unframed work,as in fillets, rails, posts, rafters, purlins etc , complete all as specified and directed.

Taking down chowkhat or frame exc 1.5 Sqm but n exc 4 Sqm each with shutters (without taking of shutter from the frames ), complete all as specified and as directed.

Taking down chowkhat or frame not exc 1.5 Sqm each with shutters (without taking of shutter from the frames ), complete all as specified and as directed.

Dismantling floor, hearth, or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

Demolition stone slabs and tiles of any description or thickness in floors, aprons etc. as in floor surface complete all as specified and directed.

M&L for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F 0.63mm thick galvanised corrugated mild steel sheeting with with two corrugation side lap and at least 150 mm end lap with L or J type or cranked hook bolts and washers in roof, wall etc, complete all as specified and directed.

S&F 0.80mm thick galvanised plain mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed), complete all as specified and directed.

M&L for Rolled mild steel works as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam,tee,angle, channel or flat sections) including distance pieces, cleats etc Fe 410 (Gde E 250) quality A, complete all as specified and directed.

M&L for rendering 20 mm thick on stone masonry surface or other than fair face of brick work or on one side of lathing finished even & smooth without using extra cement in CM 1:6, complete all as specified and directed.

M&L for rendering 20 mm thick on stone masonry surface or other than fair face of brick work or on one side of lathing finished even & smooth without using extra cement in CM 1:4, complete all as specified and directed.

Material & Labour for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces in painting on walls complete all as specified and as directed.

Material & Labour for complete removal of existing treatment and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm, complete all as specified and as directed.

M&L for preparation of newly plastered / unplastered surfaces of wall including cornices pilaster etc, and applying two coats of oil emulsion distemper, complete all as specified and directed.

M&L for preparation of old plastered surfaces of wall including cornices pilaster etc, and applying two coats of oil emulsion distemper, complete all as specified and directed.

M&L for 75 mm thick cement concrete (1:3:6), type C-2 using 40mm graded stone aggregate as in floors, hard standing etc and laid in alternate bays complete and finished the even & fair and providings joints through out the thickness of plinth protection filed with mastic filling comprising one part of 01 bitumen 85/25 grade and three part of sand by weight all as specified and directed

M & L for 25mm thick PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in sub base and flooring/hardstanding/roof padding etc. complete all as specified.

M & L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in anchoring hold fast, bed plate etc complete all as specified and directed.

M&L for vitrified ceramic tiles 8 to 9 mm thick light shade, area of each tile not exceeding 0.36sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shed of tiles, over and including 10mm thick screed bed in CM (1:4), complete all as specified and directed.

All as per item No 23 above but on skirting/dado etc over and incl 10 mm thick rendering in CM 1:4, complete all as specified and directed.

M&L for coloured Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 10 mm thick in cm 1:4 for laying floor finishes, complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 450 mm x 300 mm x 7mm thick as in vertical surfaces , set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of tile including backing layer of 10 mm thick in cement mortar 1:4 complete all as specified and directed. Shade/Colour of tile shall be approved by the GE.

M&L for 18-20mm thick granite (of approved type colour) work (table rubbed & polished) in jambs, pillars, window cills, cooking plateform laid over and including 15mm thick cement screed (1:4) and jointed with grey cement slurry and pointed with white cement (1:2) with admixture of pigment to match the colour of granite stone including cutting and and moulding the edges, complete all as specified and directed.

M&L for Chequered cement concrete tiles 300x300x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment laid over and including 20mm thick screed bed in CM 1:4,complete all as specified and directed.

S&F in repair 15mm bore brass CP basin mixer for mixing hot or cold water, screwed for iron pipe , complete all as specified and directed.

S & F in repairs Soap dish matt chrome finish CP brass screws and cleats etc complete all as specified and directed.

S & F in repairs toilet paper holder with flat recessed type stainless steel, complete all as specified and directed.

S & F in repairs plastic water closet seat cover, black, closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device, complete all as specified and directed.

S&F in repair Stainless steel sink with drainage board, made out of 1mm thick sheet for kitchen or laboratory wih plugs, washers and waste pipe, including fixing bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mmx460mm bowl size 410mmx330mmx160mm fixed, complete all as specified.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed by Engr-in-Charge.

S&F in repair 15mm bore dia bib taps, fancy type, with chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S&F in repair 15 mm bore dia stop valve/angle cock, fancy type, with chromium plated cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed down both ends for iron pipes or for unions and fixed with butter fly handle, complete all as specified and directed.

S & F in repair, Wash basins, Vitreous China table top of size 550 mm x 400 mm x 140 mm, including cutting to marble/granite if required and CP coupling of suitable size alongwith waste pipe, complete all as specified and directed.

Supply & Fix in repair PVC connection pipe 600 mm long, both end screwed for water cooler complete all as specified and directed.

Supply & Fix in repair PTMT grating doom 100 mm dia with waste hole (min weight 40 gms), complete all as specified and directed.

S&F in repair Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. including vitreous china valveless, syphonic action type flushing cistern, low level, white with inlet, ball valve, float and handle incl pipe & brackets, complete all as specified and directed.

S&F in repair telephonic hand shower (Health faucet) (ABS Body) MS chromium plated suitable for long mm dia pipe with 1.25 mtr long flexible tube in chrome finish and ABS wall hook, complete all as specified and directed.

S & F in repair 15 mm bore wall mixer brass CP, 3 in 1 system with provision of both hand shower and overhead shower complete with 115 mm long bend pipe, connecting legs & wall flange (without hand and overhead shower) with chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe for brass ferrule, complete all as specified & directed.

S&F rotational moulded polyethylene water storage tanks triple layer (Cylindrical vertical with closed top) hoisted and fixed in position all as spd in SSR Pt-I, of capacity 1000 Ltrs, complete, screwed for iron pipe or brass ferrule and fixed, incl dismantling of existing water tank, complete all as specified and as directed.

Supply & fixed in repairs Gate Valve (ISI Marked), cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 20 mm bore, complete all as specified.

S&F GI tubing medium grade 15mm dia with all fittings, cutting, threading and fixing to walls,ceiling or in floors, complete all as specified and directed.

S&F GI tubing medium grade 20mm dia with all fittings, cutting, threading and fixing to walls, ceiling or in floors, complete all as specified and directed.

Demolition or breaking up drain pipe (salt glazed ware, AC, PVC or reinforcement concrete) set in cement mortar/concrete complete all as specified and directed.

S&F 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed

S&F in repair PVC (SWR) pipes 75mm dia any length single socketed with rubber ring joint, laid in floor/walls as soil pipe/weep holes etc including clamps, complete all as specified and directed.

S&F in repair PVC (SWR) pipes 110mm dia any length single socketed with rubber ring joint, laid in floor/walls as soil pipe including clamps, complete all as specified and directed.

S&F in repair PVC (SWR) bends of any radius 75mm dia, complete all as specified and directed.

S&F in repair PVC (SWR) bends of any radius 110mm dia, complete all as specified and directed.

S&F 75mm bore PVC (SWR) vent cowl suitable for pipes complete all as specified and directed.

Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed.

M&L for walling of random rubble stone masonry brought upto course, well bonded, bedded and solidly hearted, built in cement mortar (1:6), complete all as specified and directed.

M&L for walling of random rubble stone masonry brought upto course, well bonded, bedded and solidly hearted, built in cement mortar (1:6) but except stone, complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks, straight or curved on plan exc. 6 m mean radius, built in cement mortar 1:6, complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) any thickness including cover fillets complete all as specified and directed.

S&F Anodised aluminium snap grid Size of grid 605 x 605mm frame work for false ceiling and Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling including 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screwsall as specifiedr complete all as specified and directed.

M&L for providing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh all as per specified design and pattern as directed , complete all as specified and directed by Engr in Charge Note: (Fillets, metal frame work and G.I. wire mesh are deemed to be included in the rates quoted by the contractor and rate also include cutting of ceiling for light points and provn of cobing and counter sunk)

S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F Anodised aluminium door shutter, powder coated aluminium section weighing 0.55Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing anodised aluminium fitting such as peg stay 150mm long (01 No) hinges type B-21 100 mm long (02 Nos) suitable handle (02 Nos in each door), complete all as specified and directed.

S&F Anodised aluminium window/ventilator shutter, side hung type without sash bars, aluminium section weighing 0.55Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing anodised aluminium snap beading, screws, fitting such as peg stay 150mm long (01 No) hinges type B-21 100 mm long (02 Nos) suitable handle (01 No), complete all as specified and directed.

S&F sheet glass, 5.5 mm thick ordinary quality and glazing solar control film 25 micron reflective type sticked to glass panes as per manufacturer's instructions exc. 0.5 Sq m each pane, complete all as specified and directed.

S&F sheet glass, ordinary quality, 4mm thick and glazed with oil putty or wooden beads, in square n exc. 0.5 Sq m each pane, complete all as specified and directed.

S&F in repair sheet glass, ordinary quality, 4mm thick and glazed with oil putty or wooden beads, in square n exc. 0.5 Sq m each pane, complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of aparture 1.40mm and fixed with tinned tacks or galvanised wire stapple, complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of aparture 1.40mm and fixed with tinned tacks or galvanised wire stapple, complete all as specified and directed.

M&L for mild steel work conforming to Fe-290 (Gde E-165) as in grills, gratings etc. with ends of bars shouldered and/ or rivetted or forged into spikes; framed guard bars, and similar works all as specfied and directed.

M&L for two coats of synthetic enamel painting on new steel surfaces over 10cms width or girth over and incl a coat of red oxide primer etc complete all as specified and directed.

S & F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site all as per specifications and drawing, complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive offixing on to wall to make PVC Frame as per specification and drawing

Dismantling wrought iron or mild steel work of any description complete all as specified and directed.

M&L for rendering 15 mm thick on stone masonry surface or other than fair face of brick work or on one side of lathing finished even & smooth without using extra cement in CM 1:6, complete all as specified and directed.

M&L for rendering 15 mm thick on stone masonry surface or other than fair face of brick work or on one side of lathing finished even & smooth without using extra cement in CM 1:4, complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls and applying one coat of white wash, complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of white wash, complete all as specified and directed.

M&L for preparation of old plastered/ un-plastered wall surfaces including brooming down or steel wire brushing, scraping down, smoke soot, mould, moss, efflorescent salts, trading oil and greasy spots, and applying one coat of cement base paint, complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level), complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base to flooring/path etc. finished even & fair, complete all as specified and directed.

M&L for 2nd class soft wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified.

M&L for 35 mm thick flush shutter, solid core construction with block board core and plywood face panels, complete all as specified and directed..

S & F 30mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc divided into squares with plain chamfered or rounded, mitred and rebated shash bars, any numbers, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a), supplied & fitted to chowkats, complete as specified and directed.

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with ms square tube suppling and fixing in opening as per specification & drawing.

S&F Factory made solid panel PVC door shutter 30mm thick(Stiles) consisting of frame made out of MS tubes for top and bottom rails. MS frames shall be covered with heat moulded plain coloured PVC,C, channel having PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame with 3 Nos stainless steel hinge 100 mm size, welded/sealed to the stiles rails with suitable PVC sheet beading and jointed together with solvent cement, fixed in the frame complete all as per manufacturer's instructions.

S&F sheet glass, ordinary quality, 3mm thick and glazed with oil putty or wooden beads, in square n exc. 0.5 Sq m each pane, complete all as specified and directed.

M&L for preparation of wood and wood based surfaces of any description not otherwise described over 10 cms width or girth and applying 2 coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

S&F 75 mm long mild steel butt hinges, medium weight, cold rolled and fixed, complete all as specified and directed.

S&F 100 mm long mild steel butt hinges, medium weight, cold rolled and fixed, complete all as specified and directed.

S&F 100mm long aluminium, anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed.

S&F 150mm long aluminium, anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed.

S&F 100 mm long aluminium handles, cast type, anodised and fixed, complete all as specified and directed.

S&F 150 mm long aluminium handles, cast type, anodised and fixed, complete all as specified and directed.

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and directed.

S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and directed.

S&F in repair 20 mm bore PVC ball valves high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed, complete all as specified and directed.

Supply & fixed in repairs stop cock fancy type, chromium plated with long shank and cup (concealed type) (ISI Marked), cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore, complete all as specified and directed.

S&F in repair 15mm bore dia pillar tap, fancy type with chromium plated cast copper alloy with flynut, capston head, screwed down, screwed for iron pipe or for brass ferrule and fixed without lettered hot or cold, complete all as specified and directed.

S&F in repair Vitreous china squatting pan (Orissa pattern) size 580 x 440 mm, white, with integral foot rests, complete connection to drain (outgoing pipe) and to flushing pipe and anti syphonage pipe etc, complete all as specified and as directed.

S&F in repair vitreous china urinals, half stall type of size 465x355x265mm white (minimum) with CP urinal spreader and union for discharge pipe (excluding flushing cistern and waste pipe),complete including poviding and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing with automatic flushing cistern with brackets, flush pipe, waste pipe grating and union for discharge pipe complete all as specified and directed.

S&F in repair Vitreous china Wash hand basin, white, oval type of size 630x450mm excluding taps, waste, chain and plug and porcelain stopper but incl brackets cutting and pinning in ends of brackets or erecting stand etc, complete all as specified and directed.

S&F in repair chromium plated shower rose 125 mm size, with or without swivel joints, incl fixing to steel pipe or union, complete all as specified and directed.

S&F in repairs towel ring of PTMT fixed with and incl chromium plated brass screws and beads, complete all as specified and directed.

S&F in repair 100mm branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, complete all as specified and as directed.

S&F in repair for 110mm PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified and as directed.

M&L for RCC NP3 150 mm diameter pipes laid on 150 mm thick bed of PCC 1:4:8 with excavation in any type of soil, incl manhole/drop manhole of standard size made of brick masonry/RCC with SFRC ventilating cover and frame incl all allied works to to make sewer line functional, complete all as specified and as directed. Note: PCC bed and allied civil work deemed to be included in quoted rate.

M&L for Soakage Well 2.5m dia X 3.6 m effective depth with foundation in PCC 1:3:6 walls of honeycombed masonary with top ring of M25 concrete bedding including intercepting chamber and screen chamber made of brick masonary in CM 1:4, RCC cover slab M25/ SFRC cover interconneting pipes of RCC/ DWC complete all as shown in drawing No. CE/TD-1585/2021 sheet 1/4 to 4/4 and as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

M&L for Rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connected plate confirming to Fe 410W (Gde E-250), quality 'A' complete all as specified and directed.

Extra over stone walling for hammer dressing to face stones and dressing or face beds and joints with max depression 40 mm as specified, of random rubble walling, uncoursed or brought upto courses complete all as specified and directed.

M&L for 50 mm thick cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate as in floors, hard standing etc and laid in alternate bays complete and finished the even & fair and providings joints through out the thickness of plinth protection filed with mastic filling comprising one part of 01 bitumen 85/25 grade and three part of sand by weight all as specified and directed

M&L for rendering 15 mm thick on fair face of brick work or concrete surfaces, finished even & smooth without using extra cement in CM 1:4, complete all as specified and directed.

M&L for preparation of newly plastered / unplastered surfaces of wall including cornices pilaster etc, and applying two coats of cement base paint, complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying three coats of white wash, complete all as specified and directed.

M&L for Pressed steel frames for doors for size 105 x 60mm, made of 1.25 mm thick sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc. complete all as specified and as directed.

S & F 35 mm thick 2nd class hard wood plain, framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board, medium density, wood particle board with commercial face veneered supplied & fitted to chowkat, complete as specified and directed.

S&F Steel window/ ventilator glazed and gauged (combination) with side hung/ top hung shutters incl box type / projecting type hinges, and steel peg stay, handle & locking arrangement and frame made out of 1.25 mm thick pressed steel frame complete incl necessary cooler arrangement in window & guard bars all as per sample kept in GE Office and all as specified and directed by Engr-in-Charge.

M&L for Plain cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in surface channels and drains, complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopper ends etc complete all as specified and directed.

M&L for RCC M-25 (design mix) using 20mm graded crushed stone aggregate as in foundations including rafts, footings, foundation beams, plinth beams, bases of columns etc. complete all as specified and directed by Engineer-in-Charge.

M&L for RCC M-25(design mix) using 20mm graded crushed stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed

M&L for RCC M-25(design mix) using 20mm graded crushed stone aggregate as in chajja etc complete all as specified and directed

Form work to sides and soffits of floor or roof beams, girders, bressummers, lintels etc for rough finished surface of concrete complete all as specified & directed by Engineer-in- charge.

Form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work; vertical or to better with rough finished surfaces of concrete complete all as specified & directed

M&L for TMT bars, 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire(annealed) not less than 0.90mm dia complete all as specified.

M&L for TMT bars, 5 mm dia and over upto and incl 10 mm dia in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire(annealed) not less than 0.90mm dia complete all as specified.

M&L complete removal of existing water proofing treatment including coved fillets and removing demolished material to a distance exc 50 m, complete incl dismantling existing lightening conductor and refixing in same location incl repair/replacement conductor damaged during the work of roof treatment, complete all as specified and directed.

M&L for roughening of roof surface after complete removal of existing treatment & brushing with neat cement slurry @ 3 Kg per sqm area, complete all as specified and directed.

M&L for 10mm thick screed bed or bedding layer in cement mortar (1:4) with mixing of water proofing compound @ 200ml/50 kg of cement on green surface of concrete and finished the surfaces even and fair, complete all as specified and as directed. (NOTE : Supply only WPC shall be measured and paid separately under relevant item of this Schedule 'A').

M&L for providing APP based polymeric membrane minimum weighing 3.60kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 200 gms/sqm) laid on bitumen surface by forced application and inserting in groove above 15cm from roof and including applying bitumen Vg20 paving grade (60 to 80 penetration) @1.20Kg/Sqm & blinded with fine dry sand @0.50Kg/Sqm including testing, complete all as specified and directed.

M&L for mild steel work conforming to Fe-290 (Gde E-165) as in steel gates including pintle hinges, stops, hand made sliding bolts etc and similar work, complete all as specfied and directed.

M&L for 2nd class soft wood (Kail) as in scantling, clean sawn fixed in unframed work, complete all as specfied and directed.

E&M PORTION:- Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings,removing material from site for taking credit etc and making good disturbed surfaces of wall, floors, complete all as specifiecd and directed.

M&L for point wiring with two single core 1.5 Sqmm (nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cable and one single core 1.5 Sqmm (nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cable as earth continuity to common earth and connecting to earth dolly running in and including PVC casing & caping (ISI marked) of suitable size with PVC boards of appropriate sizes and all requisite accessories such as PVC elbow, Tee, collars, bends etc. with PVC terminals box & cover for mounting swtches, sockets, fan regulator etc for mounting switches, sockets, fan regulators etc complete all as specified and as directed for the following :-

One light/fan point controlled by one way switch 6 Amp complete all as specified and directed.

One 3/5 pin socket outlet 6 amp on same board complete all as specified and directed.

One 3/5 pin socket outlet 6 amp independent board complete all as specified and directed.

All as per srl item No 135 here in before but for one 3 pin socket outlet 16/20 Amp independent with two single core 2.5 Sqmm size cable as phase & neutral and one single core 2.5 Sqmm as in continuous earth wire complete all as specified and directed.

S&F ceiling rose, 3 terminal, surface bakelite 65 mm x 50mm, PVC/poly carbonate, insulated body, complete all as specified and directed.

S&F switch piano flush type 6 Amp single pole one way, (ISI marked), complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin, 5 Amp flush type universal, complete all as specified and directed.

S&F Switch socket combination, 5 pin, 5 Amp flush type universal, complete all as specified and directed.

S&F Switch socket multipurpose combination 2 in 1, 5 pin, 5 and 15 Amp flush type universal, complete all as specified and directed.

S&F Lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed.

Supply and fixing in repair inverter LED lamp, CDL 12 watt, B22 base, complete all as specified and directed.

S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. for 1200 / 1400mm sweep, complete all as specified and directed.

Supply and fixing in repair LED batten 1x 20W, complete with all accessories internally prewired incl and connecting up with PVC insulated and sheathed, 1100 volt grade, connecting up with with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing energy efficient LED light fitting 35 W, input voltage 110V to 280VAC, 50 Hz with ingress protection IP66, LM 80, standard luminaries with efficiency 100 lumen/watt with secondary optics, perfectly matched lenses, complying to IEC60598/IS10322, with auto shut down on high voltage, CRI>70,PF>0.95, with short circuit & reverse circuit protection against 10kV high surges, minimum 25000 burning hours (life), operating temperature 1 to 50oC, rectangular shape with pressure die cast aluminium housing with weather proof gasket for lamp and driver compartment with system wattage of 45W=10%W, rated lumens, 120 degree view angle, constant current type driver having THD<10%, including all fixing arrangement like clamps, nuts, bolts, washers, 45W LED rod lamp (having PF>0.9, input voltage 90-300V, IP-66, LM80) with all accessories pre-wired and connecting with twin core twisted flexible copper conductor cable with all necessary staging, etc. including bracket complete all as specified and as directed.

Supply and fixing in repair LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

Supply and fixing in repair 18 watt LED, 6500K, slim compact , aluminium die cast edge lit panel, recess mounted round fixture with opal diffusar and separate electronic driver & holder suitable for roof ceiling including driver and connecting with three core flexible copper conductor cases of suitable size, complete all as specified and directed.

S&F Sub main wiring with single core cable 2x 4 Sqmm FRLS insulated unsheathed stranded copper conductor cable 1100 Volts grade including suitable size PVC casing capping medium grade ISI marked alongwith 1x 4 Sqmm FRLS insulated unsheathed copper conductor cable as earth wire connected with main earth dolly, incl dismantling old wiring and making good the surface by plastering and 2 coats of existing paint/colour complete all as specified and directed. Note:-Three wire of 4 sqmm and one run of PVC conduit/casing caping shall be measured as one unit.

S&F in repair sheet metal enclosure for DBs, vertical TPN double door (IP43), 4 ways built in bus bars suitable for 415 volts, AC, 50 Hz and suitable for FP MCCB as incommer and out going SP/TP MCBs complete all as specified and directed. Note:- MCBs shall be measured and paid separately.

S&F in repair sheet metal enclosure for DBs, SPN double door (IP43), 8 ways with 200 amps rated bus bar suitable for 240 volts, AC, 50 Hz, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning complete all as specified and directed.

S&F in repair MCB TPN 40 to 100 amps current carrying capacity, 415 volts 10 KA 'B' curve, ISI marked, incl connection and testing, complete all as specified and directed.

S&F in repair MCB SPN 40 amps 240 volts 10 KA 'B' curve, finger proof terminal, bi-connect termination, label holder, 35 Sqmm terminal capacity, insulating sliding shutter large two position dolly, ISI marked, complete all as specified and directed.

S&F in repair MCB single pole 6 to 32 amps 240 volts 10 KA 'C' series complete all as specified and directed.

S&F Earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron wire 4.0mm dia by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 3 of 2009 SSR Pt-I and testing complete including earth work in any type of soil, PCC 1:2:4 type B-1 as in earthing pit and cover 50mm thick reinforced with 6mm dia MS round bar @ 10cm C/C both way and MS frame, common salt, charcoal and testing on completion including dismantling unsv earthing whereever required, complete all as specified and directed.

S&F heavy duty metallic exhaust fan 300 mm sweep 1400 RPM, single phase 230 Volts including all connecting accessories, complete and taking out old existing exhaust fan, complete all as specified and directed.

S&F in repair single pole and neutral enclosure with a two pin and metal earth plug and socket complete with & incl one single pole MCB of 20 Amps complete all as specified and directed.

Supply and laying, jointing and testing, 1100 volts grade armoured, heavy duty XLPE electric cable with aluminium conductor of size 35 Sqmm 3.5 core, laid in trenches/on floor/pole or under road/culvert incl taking out old unsv cable, complete all as specified and directed.

Supply and fixing in repair LED lamp, CDL 10 watt, B22 base, complete all as specified and directed.

S&F in repair sheet metal enclosure for DBs, SPN double door (IP43), 4 ways with 200 amps rated bus bar suitable for 240 volts, AC, 50 Hz, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning complete all as specified and directed.

Supply and laying, jointing and testing, 1100 volts grade armoured, heavy duty XLPE electric cable with aluminium conductor of size 16 Sqmm 2 core, laid in trenches/on floor/pole or under road/culvert incl taking out old unsv cable, complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth in any type of soil, complete all as specified and directed by Engineer-in-charge.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm, in any type of soil, complete all as specified and as directed. Note : Punned down thickness shall be measured

Removal of excavated material to a distance not exc. 50 m and depositing where directed at a level not exceeding 1.5 mtr above starting point, complete all as specified and directed by Engineer-in-charge.

M&L for sand cushioning to UG cable 8 cm thick before laying and 15cm thick after laying complete all as specified and directed. Note:- 1.Dry fine sand of best available quality shall be used. 2.Punned thickness shall be made and paid.

Supply and laying sub class `B` bricks laid dry flat transversely along the length of cable with width equal to the length of bricks over sand cushioning as protection cover of cable laid, complete all as specified and directed.

S&F street light bracket made out of GI tubing 40mm bore, medium grade, 1.5 metre long bent to shape as directed, including suitable MS clamp of MS Flat with MS bolts, nuts and washer fixed to steel tubular pole/PCC pole duly painted with two coats of aluminium paint including taking down u/s bracket any type all as specified and as directed.

S&F in repair tubes 40 mm, light grade galvanised with all fitting and fixed to wall/ceiling or laid in floor complete all as specified and directed.

S&F in repair sheet metal enclosure for DBs, SPN double door (IP43), 12 ways with 200 amps rated bus bar suitable for 240 volts, AC, 50 Hz, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning complete all as specified and directed.

Supply, laying and jointing DWC HDPE pipe for protection of power cable (orange in colour) of 50 mm dia complete with fittings and incl cutting and clamping, complete all as specified and directed.

JAMWAL CONSTRUCTION CO (BID ID -3442776)