Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹25.2 LAdmitted-Finance | -21.00% | ₹25.2 L | L1 | Admitted-Finance |
| 2 | L2₹25.3 LAdmitted-Finance | -20.75% | ₹25.3 L | L2 | Admitted-Finance |
Tender Value
₹31.9 L
EMD Value
₹63,820
Closing Date
20 Feb 2026, 3:30 pmClosed
AGM(CE)
FCI RO Manipur
Special Repairing work at FSD Sangaiprou for the FY 2025-26 Subhead Reconstruction of boundary wall, replacement of main gate, painting etc
2026_FCI_898382_1
16/2025-26/Sangaiprou/MCW
Open Tender
Civil Works
90 days
FSD Sangaiprou
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹63,820
2 Mar 2026
13 Feb 2026
23 Feb 2026
13 Feb 2026
20 Feb 2026
13 Feb 2026
13 Feb 2026 - 20 Feb 2026
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or rains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 2.8.1 All kinds of soil.
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.
1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
Reinforced cement concrete work in walls (any thickness)including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments posts and struts etc. up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement. 1:1.5:3 (1 Cement: 1.5 Coarse Sand: 3 graded stone aggregate 20 mm nominal size)
Centering and shuttering including strutting,propping etc.and removal of form work for :Foundations, footings, bases of columns, etc. for mass concrete
Centering and shuttering including strutting,propping etc.and removal of form work for :Lintels, beams, plinth beams, girders, bressumers and cantilevers
Centering and shuttering including strutting,propping etc.and removal of form work for :Columns, Pillars, Piers, Abutments, Posts and Struts
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated barsThermo-Mechanically Treated bars of grade Fe-500D or more.
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : 6.4.1 Cement mortar 1:4 (1 cement : 4 coarse sand)
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars,posts, struts, butteresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floors etc. upto floor five level, excluding the cost of centering , shuttering and finishing; 1:2:4 (1 cement:2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. Main Gate (LS) 5m x 2.1m
Demolishing rubble masonry manually/by mechanically means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engg. In charge: In cement mortar
12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)
Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture
Lettering with black Japan paint of approved brand and manufacture
Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq. mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)
Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete.
Salvage of Scrap material from demolision of Main Gate
Please Enable Macros to View BoQ information
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.77 MB
MTF.pdf
Tender Documents • 3.63 MB
BOQ_944313.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid