15th Finance 2022-2023 Phase II

Amount

Drilling of bore well of size 6” to 8” sedimentary formation using hand base sets including insertion of casing pipes etc. including supplying and packing of pebbles and conveyance of hand bore set including loading and unloading.

Conducting Geo-Physical Survey charges.

Supplying, delivery and fixing in position of following PVC / GI pipes, electrical items and specials of approved quality and good variety excluding fixing charges etc complete.

180 mm PVC 6 KSC pipe

140 mm PVC 6 KSC pipe

50 mm U PVC pipe

Nylon rope

4 sq.mm submersible cable

60 mm special adopter

50 mm bore clamp

50 mm GI elbow

50 mm GI hex nipple

50 mm GM gate valve

50 mm non return valve

50 mm GI flange set

75 mm PVC pipe

4 way TPDP 63A / way with fuse and neutral link (main switch)

63A porcelain fuse unit (500 V)

Bore cover

Service wire (SD 62)

90 mm PVC pipe

90 mm PVC bend

90 mm PVC adopter

90 mm PVC MTA

Supply and delivery of 7.5 HP submersible pump set having a duty condition of 50 lpm discharge against head of 225 metre confirming to IS specification with ISS marking suitable for installation panel board including cost of all materials and all conveyance charges etc complete as per standard specification.

Supply and delivery of wall mounting type control panel board of Ammeter, Voltmeter single phase prevents insulator-indicating lambs, STAR DELTA / DOL starter. Suitable for 7.5 HP suitable certificate pump set including all charges.

Labour charges for the erection of submersible pump set in bore well / open well including fixing and jointing submersible cable with proper clamps up to the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges up to the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc complete.

Earth work excavation and depositing on bank with initial lead of 2 metre narrow trenches for laying of pipes and refilling earth for water supply works in the hard stiff clay stiff black cotton hard red earth shales murram gravel stoney earth and earth mixed with small size boulders and hard gravelly soil as directed by the departmental officers.

Lowering of following PVC/GI pipes and specials to trench, laying to proper grade and alignment, jointing with PVC/GI specials including testing the pipeline etc complete.

Labour charges for linking the existing pipe and relaying with new pipe and specials in proper grade and alignment including dewatering from the trench attending the repair works etc. complete.

Earth work excavation for foundation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc complete complying with SS20B. TNDSS No:23&24

Cement concrete of mix 1:4:8 (one part of cement four part of sand and eight part of aggregates) using 40 mm gauge machine broken granite stone jelly for foundation including de watering if found necessary and laid in layers of not more than 15 cm thick well rammed and consolidated etc complying with standard specification. TNDSS No:28

Cement concrete of mix 1:3:6 (one part of cement three part of sand and six part of aggregates) using 40 mm gauge machine broken granite stone jelly for foundation including de watering if found necessary and laid in layers of not more than 15 cm thick well rammed and consolidated etc complying with standard specification. TNDSS No:24

Brick work in cement mortar 1:5 (one part of cement five part of sand) mix using best country bricks of size 8¾"x4¼"x2¾" from approved quarry including curing, cost and conveyance of all materials to site and all labour charges etc complete as per standard specification.

Supplying and erecting centering to sides and soffits including supports and strutting with necessary centering for soffits upto 3 meter height using mild steel sheet of size 90 cm x 60 cm x 10 mm gauge with MS angles of size 25mm x 25mm x 3mm laid over silver oak (CW) joists of size 10cm x 6cm spaced upto 90cm c/c and casurina props or 10 cm to 13 cm dia spaced at 0.750 cm c/c complying with standard specifications as per TNDSS NO : 30 & 86.

Supply and fixing of RCC Precast slab in cement concrete 1:1½:3 mix (one part of cement one and a half part of sand and three part of aggregates) of thick 0.075 m using 20 mm ISS HBG metal including cost of molding charges mixing laying and curing cost and conveyance of all materials to site and all labour charges etc. complete as per standard specification but excluding cost of reinforcement.

Plastering walls with cement mortar 1:4 (one part of cement four part of sand) 12 mm thick including all cost and conveyance of all materials and all labour charges etc. complete as per standard specification. TNDSS No:61

Painting two coats with ready mixed plastic emulsion paints of first class quality and of approved colour over a priming coat including through scraping clean removal of dirt etc, complete and including cost of necessary plaster of paris, putty, brushes, wherever required and all labour charges, scaffolding charges etc., complete as per standard specification.

Supplying and fixing of steel door with suitable design including cost of materials, welding and conveyance of all materials to site locking arrangements and painting one coat of primer etc. complete as per standard specifications including fixing charges etc. complete for the work.

Wiring with 2 x 1.5 Sq.mm (22/0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires with TW switch box and 5A F.T. switch in flush with wall with 3mm thick hylum sheet cover and making good of the concealed portion with suitable colour for PVC concealed light point / fan point for electronic regulator. (Assume 4 points per coil) (SD-24)

Wiring with 2 x 1.5 Sq.mm (22/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150mm x 100mm x 113mm TW switch box with 3 mm thick hylem sheet cover for 5 A 3 pin non interlocking FT wall socket and 5A FT switch with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point. (SD-38)

SUTHERSON CONTRACTOR

BASKAR