REPAIRS / MAINT OF INTERNAL WATER SUPPLY, SNAITARY FITTINGS, PLUMPING WORKS AND REPAIRS TO SUNKEN FLOOR TREATEMENT TO VARIOUS MD AND OTM ACCN AND CLEANING TO SEWAGE LINES, REPAIRS OF MANHOLES AND ALLIED WORKS IN MD AND OTM AT HQ TC BANGALORE

Amount

Taking up or down steel tubing 15mm bore and connections, including cleaning and re-fixing in new or old position (walls, ceiling, floors, etc., complete all as specified and directed.

All as item no 01 above but 20mm bore, complete all as specified and directed.

Tubes 15mm bore, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down old steel tubing, complete all as specified and directed.

All as item no 03 above but 20mm bore, complete all as specified and directed.

All as item no 03 above but 25mm bore, complete all as specified and directed.

Unplasticised PVC 15mm dia pipe of pressure rating 10kgf/cm² fixed complete to walls, ceiling or in florr etc., any type of pipe including taking up or down old any type of pipe, complete all as specified and directed.

All as item no 06 above but 20mm bore, complete all as specified and directed.

All as item no 06 above but 25mm bore, complete all as specified and directed.

Cutting chases, pinning in stone concrete block or slab walls making good to facings where required and pointing in ement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth, complete all as specified and directed.

Cutting chases, pinning in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state, and local regulations.

Vitrified Ceramic tiles in dark shade 10mm thick of size 600mm x 600mm in floors etc. set and jointed in neat cement slurry over and including 15 mm thick screed bed of CM 1:6 and pointed in white/ coloured cement to match, complete all as specified and directed.

All as per item No 12 above but as in wall skirting, complete all as specified and directed.

Non - skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick screed bed of CM 1:6, complete all as specified and directed.

All as per item No 14 above but as in wall skirting, complete all as specified and directed.

Non - skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick screed bed of CM 1:6, complete all as specified and directed.

Glazed ceramic coloured tiles in vertical surface 350x250mm x 7mm/ 450x350x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick bedding layer of cement mortar 1:4, complete all as specified and directed.

Glazed ceramic coloured tiles in vertical surface 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick bedding layer of cement mortar 1:4, complete all as specified and directed.

20mm thick Granite (Jet black) of any type work (table rubbed and polished) in cooking plateform, widow sill and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade granite, complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dresses stonework and precast concrete articles, complete all as specified and directed. Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state, and local regulations.

Pre-cast cement concrete block type C1 1:3:6 (20mm graded stone aggregate) masonry with solid blocks, exc. 10cm in width and setting in mortar 1:6, complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. Including racking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and directed. Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state, and local regulations.

Rendering 15mm thick on fair faces of brick works or concrete surfaces in CM 1:6 and finished even and smooth without using extra cement, complete all as specified and directed.

Preparing new plastered on wall and applying three coats of white wash, complete all as specified and directed.

Two coats of Distempering wall with distemper oil emulsion white or tinted over a coat of 1mm thick wall care putty, including preparation of new surface, complete all as specified and directed.

Rendering 15mm thick cement plaster in cement morter 1:4 with and including water proofing compound @ 2% by wt. of cement, on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed.

Two coats of cement paint over a coat of priming plastered and other surfaced with alkali resistant priming paint including preparation of new surfaces, complete all as specified and directed.

Rendering 10mm thick cement plaster in cement morter 1:3, on concrete sufaces as in ceiling, finished even and smooth without using extra cement, complete all as specified and directed.

Preparing new plastered on ceiling and applying three coats of white wash, complete all as specified and directed.

Preparation of old decorated plastered or unplastered surface of walls including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying one coat of white washing, complete all as specified and directed.

All as per item No 30 here-in -before but two coats of white washing on walls, complete all as specified and directed.

All as per item No 30 here-in -before but one coat of white washing on ceiling, complete all as specified and directed.

Preparation of old decorated surface of walls including washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of distemper oil emulsion, complete all as specified and directed.

All as per item No 33 here-in -before but two coats of distemper oil emulsion on walls, complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level), complete all as specified and directed. Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state, and local regulations.

40mm thick Cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) as in flooring all as specified, complete all as specified and directed.

75mm thick Cement concrete type C-2, 1:3:6 (40mm graded stone aggregate) as in flooring, foot path, hard standing, plinth protection, bases of water tanks etc., complete all as specified and directed.

25mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded stone aggregate) as in flooring, complete all as specified and directed.

PVC (SWR) pipes 110mm bore, single socketed, in any length with rubber ring joints, laid in trenches or in floors,fixed as in repairs, complete all as specified and directed.

PVC (SWR) pipes 110mm bore, single socketed, in any length with rubber ring joints, fixed to wall, fixed as in repairs, complete all as specified and directed.

PVC (SWR) pipes 110mm bore, single socketed, in any length with rubber ring joints, fixed to wall for above four to eight storey building including necessary scaffolding at any position building including necessary fixing cleats/clamps etc, fixed as in repairs, complete all as specified and directed.

100mm cast iron soil waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floor or fixed with wall including necessary fixing cleats/clamps fixed in repair, complete all as specified and directed.

100mm cast iron soil waste and vent pipes in any length with or without ears with cement joints fixed to walls for above four to eight storey building including necessary scaffolding at any position building necessary fixing cleats/clamps etc, fixed as in repairs, complete all as specified and directed.

110 mm bore PVC (SWR) Junction single (Single T) equal or unequal, fixed as in repairs, complete all as specified and directed.

110 mm bore PVC (SWR) branch piece single (Single Y) equal or unequal,fixed as in repairs, complete all as specified and directed.

110 mm bore PVC (SWR) branch piece Double (Double Y) equal or unequal, fixed as in repairs, complete all as specified and directed.

110mm bore PVC (SWR) bends of any radius, fixed as in repairs, complete all as specified and directed.

PVC (SWR) bends 110mm bore vent cowl, fixed as in repairs, complete all as specified and directed.

PVC (SWR) 'P' or 'S' trap 110mm bore, fixed as in repairs, complete all as specified and directed.

100 mm bore cast iron soil waste branch piece, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel, fixed as in repairs, complete all as specified and directed.

100mm bore cast iron soil waste bends of any radius, fixed as in repairs, complete all as specified and directed.

Cast iron soil waste bends 100mm bore vent cowl, fixed as in repairs, complete all as specified and directed.

Cast iron soil waste 'P' or 'S' trap 100mm bore, fixed as in repairs, complete all as specified and directed.

PVC (SWR) pipes 75mm bore, single socketed, in any length with rubber ring joints, laid in trenches or in floors, fixed as in repairs, complete all as specified and directed.

PVC (SWR) pipes 75mm bore, single socketed, in any length with rubber ring joints, fixed to wall, fixed as in repairs, complete all as specified and directed.

PVC (SWR) pipes 75mm bore, single socketed, in any length with rubber ring joints, fixed to wall for above four to eight storey building including necessary scaffolding at any position building including necessary fixing cleats/clamps etc, fixed as in repairs, complete all as specified and directed.

75 mm cast iron soil waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floor or fixed with wall including necessary fixing cleats/clamps, fixed in repair, complete all as specified and directed.

75 mm bore PVC (SWR) Junction single (Single T) equal or unequal, fixed as in repairs, complete all as specified and directed.

75 mm bore PVC (SWR) branch piece single (Single Y) equal or unequal, fixed as in repairs, complete all as specified and directed.

75 mm bore PVC (SWR) branch piece double (Double Y) equal or unequal, fixed as in repairs, complete all as specified and directed.

75mm bore PVC (SWR) bends of any radius, fixed as in repairs, complete all as specified and directed.

Mild steel work in Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; plate washers and similar small articles conforming to FE-290 Gde-E-165, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each, complete all as specified and directed.

Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life), complete all as specified and directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet 12mm thick to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed.

75mm long Butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed.

125mm aluminium anodised barrel tower bolts of extruded section and fixed, complete all as specified and directed.

125mm Aluminium handles, cast type anodised, complete all as specified and directed.

150mm long aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed, complete all as specified and directed.

One piece floor mounted toilet water closet of size (WxPxH) 350x665x750mm white or tinted, S-trap 300/ 220/ 110mm or P-trap 180mm, UF ezee close seat cover, wash down system, with flush mechanism and fixed in repairs with necessary fixing bolts/ screws etc, fixed as in rpairs, complete all as specified and directed. Make Somany, Cera, or equivalent.

One piece floor mounted toilet water closet of size (WxPxH) 380x680x755mm white or tinted, S-trap, 220mm, trendy square design, slim UF ezee close seat cover, wash down system, dual flush (6/3 ltrs) mechanism and fixed in repairs with necessary fixing bolts/ screws etc, fixed as in repairs, complete all as specified and directed. Make Somany, Cera, or equivalent.

One piece wall hung toilet water closet of size (WxPxH) 360x645x750mm white or tinted, P-trap, kape seat cover ezee close, kape cistern, uniek/ kape internal fittings- dual flush mechanism and fixed in repairs with necessary fixing bolts/ screws etc, fixed as in repairs, complete all as specified and directed. Make Somany, Cera, or equivalent.

Vitreous China wash down water closet pan (pedestal pattern), white or tinted (excluding flushing cistern and flush pipe), including plastic water closet seat, black or white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, fixed as in repairs, complete all as specified and directed.

Vitreous china, semi-pedestal pattern (Anglo-Indian Type) wash down water closet, white or tinted (excluding flushing cistern and flush pipe), including plastic water closet seat, black or white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, fixed as in repairs, complete all as specified and directed.

Vitreous china squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white or tinted, with integral foot rests (excluding flushing cistern and flush pipe), fixed as in repairs, complete all as specified and directed.

PVC valveless, syphonic action type, flushing cistern of 10 litres capacity, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern, fixed as in repairs, complete all as specified and directed.

Plastic water closet seat, white or tinted, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, fixed as in repairs, complete all as specified and directed.

S&F ceramic wash basin of size (WxPxH) 490x430x127mm, white or tinted, counter top, including waste coupling chromium plated etc. and fixed in repairs over granite or wooden cabinet including necessary adhesive or fittings, complete all as specified and directed. Make Somany, Cera or equivalent

Ceramic wash basin of size 550x460mm, white or tinted, counter sunk, including waste coupling chromium plated etc. and fixed in repairs in granite or wooden cabinet including necessary adhesive or fittings, complete all as specified and directed. Make Somany, Cera or equivalent

Vitreous china wash basin, size 550 x 400mm white including brackets, and waste coupling & pipe of 32mm dia, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement, fixed as in repairs, complete all as specified and directed.

Glass corner shelf assembly fancy type made of 5 to 6mm thick glass of size 250 x 250mm fixed with brass CP brackets, fixed as in repairs, complete all as specified and directed.

Sheet glass shelf assembly with L clamp consisting of 5 to 6mm thick glass 12 to 15cm wide with brass CP bracket guard and railing 45 to 60cm long, fixed as in repairs, complete all as specified and directed.

Mirror cabinet with Modiguard/Saint Gobain mirror of size not less than 500mmx350mmx125mm, fixed as in repairs, complete all as specified and directed.

6mm thick mirror of any size including rounding and polishing of edges with necessay fittings, fixed as in repairs, complete all as specified and directed.

Brass cromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges, fixed as in repairs, complete all as specified and directed.

Soap dish, any type of size approximate size 160x 60x90mm, fixed to plugs with chromium plated brass screws, fixed as in repairs, complete all as specified and directed.

5mm thick mirror of size 450mm x 600mm mounted on 6mm thick commercial ply wood backing and screwed with PVC channel alround, fixed as in repairs, complete all as specified and directed.

Premium quality 15mm bore central hole basin mixer with regular spout without popup waste system, fixed as in repairs, complete all as specified and directed. Make Jaguar, Cera, Somany or equivalent.

Premium quality 15mm bore wall mixer system with provision for overhead shower complete with 115mm long bend pipe, connecting Legs & wall Flange, fixed as in repairs, complete all as specified and directed. Make Jaguar, Cera, Somany or equivalent.

15mm bore hand shower (Health Faucet) with 8mm Dia, 1 Meter Long flexible tube & wall hook, fixed as in repairs, complete all as specified and directed. Make Cera, Parryware, Somany, Jaguar or equivalent.

15mm two in one Bib taps, chromium plated, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, fixed as in repairs, complete all as specified and directed.

Premium quality 15mm bib tap with wall flange, fixed as in repairs, complete all as specified and directed. Make Jaguar, Cera, Somany or equivalent.

Premium quality 15mm angular stop cock with wall flange, fixed as in repairs, complete all as specified and directed. Make Jaguar, Cera, Somany or equivalent.

Concealed cock 15mm bore, fancy type chromium plated with brass, fixed as in repairs, complete all as specified and directed.

15mm Bib taps, chromium plated, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, fixed as in repairs, complete all as specified and directed.

15mm pillar tap,cast copper alloy, with capstan head, chromium plated, fancy type screwed down high pressure,with or without lettered "Hot" or "Cold" with long screwed shank and fly-nuts, screwed for iron pipe , fixed as in repairs, complete all as specified and directed.

Brass chromium plated shower rose 125mm size, fixed as in repairs, complete all as specified and directed.

PVC connections 15mm size with PTMT nuts of length 600mm, fixed as in repairs, complete all as specified and directed.

Low density polyethylene (LDPE) pipes 32mm dia, of pressure rating 6 kgf/sq. cm, fixed as in repairs, complete all as specified and directed.

Low density polyethylene (HDPE) pipes 32mm dia, of pressure rating 6 kgf/sq. cm, fixed as in repairs, complete all as specified and directed.

32mm dia waste fittings, brass, chromium plated for glazed ware sinks, asins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end, fixed as in repairs, complete all as specified and directed.

Grating doom 100mm dia with or without waste hole of PTMT. (Minimum weight 25gms), fixed as in repairs, complete all as specified and directed.

Grating doom 125mm dia with or without waste hole of PTMT. (Minimum weight 40gms), fixed as in repairs, complete all as specified and directed.

Grating doom 100 - 125mm dia with or without waste hole of stainless steel, fixed as in repairs, complete all as specified and directed.

Kitchen utensil rack in steel made of premium grade stainless steel and highly durable and rust-proof of size not less than 90cmx80cmx20cm, fixed as in repairs, complete all as specified and directed.

Sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, fixed as in repairs, complete all as specified and directed.

15mm brass tap spindle, 100-200g corrosion resistant, fixed as in repairs, complete all as specified and directed.

Rotational moulded polyethylene water storage tanks, capacity in litres 500 (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I and directed including dismantling of old unserviceable tank any type any capacity, complete all as specified and directed.

Rotational moulded polyethylene water storage tanks, capacity in litres 1000 (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I and directed including dismantling of old unserviceable tank any type any capacity, complete all as specified and directed.

Ball valves 20mm dia, high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms), fixed as in repairs, complete all as specified and directed.

Vitreous china urinals bowl type (back or corner wall type) complete including providing and fixing plugs bedding urinals against wall in cement mortar 1:2 securing urinals to plugs with and including 60 mm long brass screws, pointing around urinal back in cement fixing automatic flushing cistern with brackets flush pipe grating and union for discharge pipe, fixed as in repairs, complete allas specified and directed. (Exclusive of fixing supply pipe to flushing cistern trap and waste pipe)

Vitreous china urinals half stall urinal type(back or corner wall type) complete including providing and fixing plugs bedding urinals against wall in cement mortar 1:2 securing urinals to plugs with and including 60 mm long brass screws, pointing around urinal back in cement fixing automatic flushing cistern with brackets flush pipe grating and union for discharge pipe (Exclusive of fixing supply pipe to flushing cistern trap and waste pipe), fixed as in repairs, complete all as specified and directed.

Complete sensor assembly for urinal pot, fixed as in repairs, complete all as specified and directed.

Toilet paper holder of brass chromium plated and fixed to wall with necessary brass screws, fixed as in repairs, complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed. Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state, and local regulations.

Cement concrete type D-2, 1:4:8, using 40mm graded aggregate as in foundations, fillings and mass concrete,complete all as specified and directed.

Sunken slab treatment comprising of following :- (a) Taking out/down old existing sunken slab treatment and cleaning the old RCC surfaces of sunken slab including removal of the rubbish out of campus, complete all as specified and directed. (b) M&L for 25mm thick PCC type B1 (Using 20 mm graded stone)aggregate over cleaned sunken slab surfaces. (c) M&L for applying bituminus priming coat/tack coat coat over PCC surfaces @ 0.30Kg/Sqm of surfaces. (d) M&L for 4mm thick APP modified water proofing membrane weighing not less than 4 kg/sqm reinforced with non woven polyster mat weighing not less than 160 gm/sqm including minimum 10cm lap torch sealed and bound. (e) M&L for applying bitumen grade 85/25 over primer coat @ 1.20 Kg /Sqm (f) M&L for 25 mm thick plastering in CM 1:4 mixed with liquid water proofing admixure as per manufactures instructions complete all as specified and directed by Engr-in-charge. (Note : WPC shall be measured and paid separately)

Supply only integral water proofing compound, complete all as specified and directed.

Prelaminated particle board, 18/19mm thick exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, fixed as in repairs, complete all as specified and directed.

40mm width of flap (when open) continuous (piano) hinges, mild steel, bright finish or electrogalvanised, fixed as in repairs, complete all as specified and directed.

Stainless steel self closing auto hinges for wooden cabinet shutter, fixed as in repairs, complete all as specified and directed.

Stainless steel telescopic channel ball bearing drawer channel 500 MM with loading capacity: 45Kgs, fixed as in repairs, complete all as specified and directed.

40mm dia, cupboard knobs fixed with nut, screw and washer of brass polished, fixed as in repairs, complete all as specified and directed.

Extruded brass handles, of 75 mm long fabricated type polished, complete all as specified and directed.

Cleaning/ removal of blockage of floor trap/ nahani traps of 75 mm/100 mm bore in kitchen/ bathroom/ toilets etc including removing PVC/ stainless steel trap grating and refixing the same with white cement & pigment to match the surface after making the floor/ nahani trap fully functional, complete all as specified and directed.

Cleaning/ removal of blockage of gully trap any size and any depth including removing RCC covers and refixing the same after making the gully trap fully functional, complete all as specified and directed.

Cleaning/ removal of blockage of Indian type WC and ‘P’/’S’ trap and making fully functional, complete all as specified and directed.

Cleaning/ removal of blockage of Europian type WC ‘P’/’S’ trap and making fully functional, complete all as specified and directed.

Cleaning/ removal of blockage of Europian type WC, ‘P’/’S’ trap including removing carefully, of EWC and cleaning the trap completely and making fully functional and refixing the WC in same position including necessary bolts and making good to disturbed surfaces with white cement and pigment to match the existing surface, complete all as specified and directed.

Cleaning of sewage pipe lines of size upto 100mm dia bore at any depth and removing the blockage by rodding/ by using bamboo split or by mechanical means, between the manholes, Nahani traps to gully traps, gully traps to manholes including vertical stack pipes (where ordered), taking out all debries, sludge or any solid/foreign materials from sewage line and flushing with water and testing after cleaning for leakages/clogging, etc. complete including removing the debries to outside MOD land, complete all as specified and directed.

All as item no 130 above but 150mm bore, complete all as specified and directed.

All as item no 130 above but 250mm bore, complete all as specified and directed.

All as item no 130 above but 300mm bore, complete all as specified and directed.

Cleaning/ removal of blockage of upto 100 mm bore pipes of any description fixed to walls including removing the access plate of bend door and refixing the same after making the pipes fully functional, including all necessary arrangement upto 7th floor, complete all as specified and directed.

Cleaning of blockage in sewage pipe lines between Manhole to Manhole of any bore of pipe and in any depth and removing the blockages using by vehicle mounted jet pressure system cleaning of pipes and taking out all debries, sludge or any solid/ foreign materials from sewage line and flushing with water and testing after cleaning for blockages/ clogging etc. including removing the debries to outside MOD land, complete all as specified and directed.

De-silting of manholes upto 1.00 metre depth and removing of clogged mud, muck, silt, floating materials, hard materials like stone/ brick bats from inside the manholes and mouth of pipes, to a distance 100metres away from the site including taking up manhole covers of any description and re-fixing in the same position after de-silting, complete all as specified and directed. (Note : The rate quoted deemed to include for clearing of bushes upto 2 metre all around the manhole).

All as per Sl item No 136 above but depth of manholes exceeding 1.00 metre and not exceeding 2 metre depth, complete all as specified and directed.

All as per Sl item No 136 above but depth of manholes exceeding 2.00 metre and not exceeding 3 metre depth, complete all as specified and directed.

Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed. Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state, and local regulations.

M&L for providing precast cement concrete type B1 1:2:4 (20mm graded stone aggregate) as in landings, chamber/ cover slabs (for man holes etc.) and similar articles with plain faces and set in CM 1:4 where required, complete all as specified and directed.

Reinforcement TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking required and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips quality confirming to Fe-410 Gde E-250 for stretched wire, complete all as specified and directed.

Mild steel plain black sheet, 1.6mm thick as in cladding, cut to required size , bending or turning up, mitred angles, etc., placed in position and welded, fixed as in repairs, complete all as specified and directed.

Dismantling iron work of any description, complete all as specified and directed.

Cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, manhole covers and similar articles (Articles exc 5 kg each), complete all as specified and directed.

Cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, manhole covers and similar articles (Articles n. exc 5 kg each), complete all as specified and directed.

Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165, complete all as specified and directed.

Preparation of new or previously untreated steel and iron surfaces of any description, over 10 cm in width or girth and applying two coats of synthetic enamel (ordinary tint) paints over a coat of red oxide priming paint, complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth for foundation manholes etc and getting out in hard/dense soil, complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and exceeding 1.5 m but not exceeding 3.0m depth for foundation manholes etc and getting out in hard/dense soil, complete all as specified and directed.

Returning , filling in including spreading , levelling , watering and well ramming in layers not exc 25 cm in solft/loose soil, complete all as specified and directed.

Removing excavated material n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point soil, complete all as specified and directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar and internal dia of pipe150 mm, complete all as specified and directed. Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state, and local regulations.

All as item no 152 above but 250mm bore, complete all as specified and directed.

All as item no 152 above but 300mm bore, complete all as specified and directed.

150mm bore sail-glazed stoneware drain pipes laid in trenches and jointed, complete all as specified and directed.

All as item no 155 above but 250mm bore, complete all as specified and directed.

All as item no 155 above but 300mm bore, complete all as specified and directed.

150mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified & directed.

Reinforced concrete pipes 150mm bore, class NP-3, laid and jointed complete with collers, complete all as specified and directed.

All as item no 159 above but 250mm bore, complete all as specified and directed.

All as item no 159 above but 300mm bore, complete all as specified and directed.

Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:3:6 type C-2 for 150 mm dia pipe, complete all as specified and directed.

All as item no 162 above but 250mm bore, complete all as specified and directed.

All as item no 162 above but 300mm bore, complete all as specified and directed.

Concrete bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested; in cement concrete 1:3:6 type C-2 for 150 mm dia pipe, complete all as specified and directed.

Demolition of brickwork or stone/boulder/PCC block masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified & directed .

Pre-cast cement concrete block masonary with solid blocks, Type C-1 1:3:6 (20mm graded stone aggregate), exc 10 cm in width and setting in cement mortar in CM 1:6, complete all as specified & directed.

Providing precast cement concrete solid building blocks or slabs, Type C-1 1:3:6 (20mm graded stone aggregate), 10cm thick (with plain or interlocking joints as directed) setting in cement mortar 1:4, complete all as specified and directed.

Rendering 15mm thick cement plaster in cement morter 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for neeru finish to plastering, complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed. Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state, and local regulations.

PCC 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in coping and benching and the like including weathering slightly rounded or chamfered angle and throating, complete all as specified and directed.

100mm thick PCC 1:3:6 type C-2 (40mm graded aggregate), complete all as specified and directed.

40mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded stone aggregate), complete all as specified and directed.

Cement concerte in surface channels and drains type C-2 1:3:6 using 20mm graded aggregate, complete all as specified and directed.

Extra for forming fair finished surfaces of drain or channels, inner girth 30 cms, using extra cement including forms, moulds mitred/ stopped ends etc, complete all as specified and directed.

Removing old dumped junk/ building materials/ debris/ tree roots, trunk, & branches etc. to a distance of 30Km or beyond, out of premises of metropolitan area, including loading, unloading by manually or by mechanical means (JCB) and to be transported through tractor-trolly or tipper and stacking at the destination, complete all as specified and directed.

SHREE HARI BUILDERS

OM ENTERPRISES

Raashi Constructions

M/S J S PRAKASAM