Repairs and Renovation of Internal and External Electrification of Godown 6 and 8 along with Improvement of External Lightings at FSD Pune.

Supplying of 40 watt LED high efficacy wellglass advanced design luminaires suitable for industrial use, housing made of pressure die cast aluminium powder coated with ingress protection of IP66, consumes lesser energy and maintain high lighting levels with 1no. eyebolt provided for mounting purpose on godown truss/wall along with all accessories such as clamp, nuts, bolts,etc as required and completed in all respect (Lumen output ->=100 Lumens/Watt with 2 years manufacturing warranty. (NABL Certified as per ISO / IEC Specification)

LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy ≥105 <120 lm/Watt) Supplying of Street light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 °C to 50 °C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70,under voltage and over voltage protection, EMI EMC As per CISPR -15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin),SDCM (Standard Deviation Colour Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output. LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).

Supply of Surface waterproof industrial luminaire with polycarbonate housing and diffuser suitable for twin 4ft T8 tube having ingress protection of IP66 along with 2 Nos of 20 or 22 Watt LED polycarbonate T8 tube with in build driver with metal heat sink and Installation, testing and commissioning of pre-wired, LED fitting, complete with all accessories and tube/lamp etc. directly on ceiling/ wall completed in all respect etc.as required (Lumen output ->=100 Lumens/Watt with 2 years manufacturing warranty. (NABL Certified as per ISO / IEC Specification)

Supplying of 70 watt LED high efficacy wellglass advanced design luminaires suitable for industrial use, housing made of pressure die cast aluminium powder coated with ingress protection of IP66, consumes lesser energy and maintain high lighting levels with 1no. eyebolt provided for mounting purpose on godown truss/wall along with all accessories such as clamp, nuts, bolts,etc as required and completed in all respect (Lumen output ->=100 Lumens/Watt with 2 years manufacturing warranty. (NABL Certified as per ISO / IEC Specification)

Supplying and fixing of 6 way, Double Door single pole and neutral, sheet steel, MCB Distribution Board,240V, on surface/recess, complete with tinned copper bus bar, neutral bus bar,earth bar, din bar, interconnection, powder painted including earthing etc as required (But without MCB/RCCB/Isolator)

Supplying and fixing metal box of 180 mm X 100 mm X 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and painting etc. as required

Supplying and fixing of 300 mm x 300 mm size metalic frame cover fabricated with 25 mm x 25 mm x 3 mm thick angle iron welded construction frame structured and 1.6 mm thick M. S. sheet cover plate with double hinges and knobe type locking arrangement including painting, making recess in wall, masonary, plastering & finishing the good (As per site requirement)

Supply and Fixing following piano type switch on the existing switch box / cover including connections etc. as required.(ISI certified)

5/6 Amp switch

Installation, testing and commissioning of all types lighting fixtures, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required.

Supplying and fixing following pole Residual current circuit breaker (RCCB) having a sensitive current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required(As per IS/IEC 60898-1)

Four Pole, 40A, 415 V

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10KA "C" curve, miniature circuit breaker suitable for inductive load of following pole in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Double Pole

Providing and Fixing of 32 mm dia x 2.00 metres long GI pipe (medium class )bracket for mounting of LED street light fitting on pole including bending the pipe to the required shape , 2 Nos 40 mm x 3 mm flat iron clamps with nuts bolts and washer, painting the flat iron with primer and finish paint etc as required

Supplying and fixing 30 A, 415 V, TPN Industrial type socket outlet ,with 4 pole and earth, metal enclosed plug top alongwith 30 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess ,with chained metal coverfor the socket outlet and complete with connections , testing and comissioning etc as required.

Supplying and fixing of 6 Way 63 A Wall Mounted Busbar Chamber made of minimum 1.6 mm thick metallic body with antirust/anticorrosion painting including all accessories as required

Supplying of XLPE insulated & PVC tape innersheathed aluminium conductor armoured cable of 1.1 KV grade of following size confirming to IS:7098 (Part- I) 1988 with up to date ammendment as required.

4 X 10 sq. mm

Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following on wall surface etc as required.

Upto 35 sqmm (clamped with 1mm thick saddle)

Supplying & Making end termination with brass compression gland and aluminium lugs for following size of PVC insulated & PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required

4 X 10 sq. mm

Supplying and fixing FP sheet steel enclosure on surface/ recess along with 63 A 415 V "C" curve FP MCB complete with connections, testing and commissioning etc. as required.

Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the surface/ recessed steel/ PVC conduit as required.

5 x 6 sq. mm

Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.

Providing and fixing G.I. tape 20 mm x 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run)

Jointing G.I. tape (with another GI tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required.

Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos of GI bolts, nuts, chuck nuts and spring washers etc. complete as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/coke and salt as required.

The items are to be dismantled where the work has to be executed and take away by the giving the credit to the work estimate

Old Lamps

Old Street Lights

Please Enable Macros to View BoQ information