SPECIAL REPAIRS/REPLACEMENT OF ELECTRICAL WIRING FITTINGS AND FIXTURES AT CERTAIN SMQ/TMQs AND CERTAIN MINOR WORKS AT AFS BEGUMPET AND CAW UNDER GE (AF) HAKIMPET

Amount

Taking down carefully copper/ aluminium point wiring (light, fan,socket or power) complete, including fitting & fixtures such as switches with board, ceiling roses, pendents, bell, bell push, lamp holders, regulators, sockets, light fittings etc., removing material from site and making good disturbed surfaces of walls, floors etc. complete all as specified and as directed by the Engineer-in-charge.

Taking down carefully MCB DB SPN/TPN, Metal P&S alongwith MCBs complete and taking credit all as specified and as directed by the Engineer-in-charge.

M& L for point wiring complete with 1.5 sq mm single core PVC insulated FRLS cable, with multi standard copper conductors, 1100 volts grade, drawn thorough and including double locking type PVC casing and caping and its accessories of suitable size and including provisoin of 1.5 sqmm PVC insulated copper cable FRLS as earth continuity conductor, including fabricated steel teminal box made out of GI sheet concealed in walls of suitable module for fixing switches /sockets/ regulators etc.all specified for :-

(a) One light point controlled by one way switch .

(b) One ceiling fan/ exhaut fan point controlled by one way switch.

(c) One 3 pin socket outlet 5 Amps on the same board with other switches.

(d) One 3 pin socket outlet 5 Amps on the Independent board.

(e) One bell/ buzzer point controlled by one push button.

( f) One Light Control By Two way Switch

(g) All as per item No 3 here-in-before but with 4 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 4 Sq mm copper conductor green in colour as earth continuity conductor complete all as specified and as directed by the Engineer-in-charge.

S&F Switch Piano, flush type single pole, one way 5 Amps.

S&F Switch socket combination, 2 in 1, 3 Pin, flush type 5 Amps.

S&F switch socket combination, 2 in 1, 5 Pin, flush type 5&15 Amps.

S&F stepped type electronic fan regulator flush type

S&F Bell push suitable 230 V

S&F two way switch 5 A flush type

M&L for Sub main wiring complete with Two runs of 6 Sq mm Single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with One run of 6 Sq mm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including suitable size PVC CONDUIT (surface) and accessories including taking down old u/s sub main wiring complete all as specified and as directed. Note: Three runs of 6 Sq mm + PVC conduit with accessories will be measured as a one unit.

All as per Item No 10 here-in-above but with three runs of 4 Sqmm cable ditto

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative batten type with driver, holder LED tube light fitting connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. Make: Havells/CG/Philips/Bajaj or as approved by GE

Supply and fixing LED light fitting 2 feet, 10 watt 220 V AC decorative type with driver holder and LED tube light fitting including connecting up with three core flexible copper conductor cable of suitable size complete. Make: Havells/CG/Philips/Bajaj or as approved by GE

S&F Lamp Holder (Angle type) with LED Bulb 9 Watt completed all as specified and as directed.

S&F bell, Ding Dong AC, 230 volts all as specified and as directed

S&F ceiling rose 3 terminal PVC/Polycarbonate insulated body.

S&F Metal clad plug & socket 2 pole and earth complete with enclosure, plug, socket, MCB 16/20A 'C' curve concealed in wall and make good all as specified and as directed

Taking down existing ceiling fan from it's position and re-fixing all as specified and as directed.

S&F transperent meter enclosure suitable for single phase energy meter including taking down existing enerty meter from its position and refixing the energy meter in the enclsoure complete all as specified and as directed.

Supply and fix PVC connection 15 mm dia 450 mm long with PTMT nuts on both sides suitable for cold/ hot water complete all as specified and as directed by the Engineer-in-charge.

M&L for cutting existing GI pipe 20mm dia in situ and making branch connection using GI Tee 20x20x20mm

S&F GI pipe medium grade of 20mm dia including GI tee, bends, sockets, unions etc complete all as specified and as directed by the Engineer-in-charge.

S&F Stop valves 15mm dia, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed fancy type, chromium plated

S&F chromium plated bib tap of size 15 mm dia bore complete all as specified and as directed.

Supply & fix vertical mounted MCCB (Moulded Case Circuit Breaker) DB TPN 4 way of IP 43 protection double door with insulated bus bar assembly, neutral bar all as specified and directed. (Note: Incomer MCCB & outgoing MCBs will be measured and paid seperately). Make : Legrand / Indo Asian/ABB/Havells/L&T

Supply & fix MCB DB SPN 8 way double door with neutral bar etc all as specified and directed. (Note: Incomer & outgoing MCBs will be measured and paid seperately)

Supply & fix MCCB (Moulded Case Circuit Breaker) upto 63 Amps, 16KA, 3 pole, 415V suitable for all as specified and directed.

Supply & fix MCB SPN 40 Amps, 10KA, C Curve, 240V all as specified and directed.

Supply & fix MCB SP 6-32 Amps, 10KA, C Curve, 240V all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode of size 600mm x 600mm x 6mm thick, buried directly in ground vertically to a depth not less than 2.25 Mtr below ground with top edge of the earth plate not less than 1.5 mtr below normal ground level, Earth plate shall be connected with double bolts, nuts, check nuts & washers, to & including 4 mm galvanized iron wire as earth lead, extended upto 7.5 m or upto test terminal point, drawn through 15mm dia med. gr. GI pipe for protection of galvanized iron wire in the ground, further connecting with GI wire 4mm dia to Distribution board, including excavation, earth work, Charcoal, PCC chamber, RCC cover slab, watering pipe 20mm dia bore med. grade, wire net, funnel etc. & testing on completion all as specified in plate No.3 of SSR Pt-I including taking down old U/S earthing. NOTE: a) GI Pipe for protection of earthing wire and earth strip beyond 7.5m or test point shall be measured and paid seperately under relevant items.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300 mm or nearest size

Supply and fix louvers/shutters made of galvanised sheet to open and close opening/hole made for exhaust fan of size 300 mm dia automatically

Supply and fix electric water heater, storage type ABS body with SS inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. Make: Bajaj/Havells/Crompton/usha/Racold

S&F for provision of GI pipe medium grade for support of fan hanging 40mm dia of length 3 mtr and grouting both ends of pipe into brick wall rigidly using PCC suitable for mounting of ceiling fan and including suitable hook, nuts bolts, making good etc.

M&L for GI wire 4 mm dia as earth continuity wire

M&L for point wiring complete 1.5 sqmm single core FRLS grade PVC insulated, sheathed, 1100V grade copper multistranded conductor drawn through and surface PVC casing caping with fittings/ accessories with provn of MS terminal boxes of suitable size and 3mm thick plastic laminated sheet top cover for housing of switches and sockets etc including 1.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor for earth continuity conductor and connected to common earth dolley for the following :-

(a) One light / fan point controlled by one switch

Providing suitable hole in brick /stone masonary or any type of wall for exhaust fan of upto 300 mm sweep and repair to the wall to give smooth finish as existing to the disturbed surface of wall all as specified and as directed

Supply & fix exhaust fans AC single phase 230/ 240 V of size 230 mm sweep with louver complete all as directed by Engr-in-Charge. Make : Havells Ventil DB or equivalent in Bajaj/Khaitan

Excavation in trenches not exceeding 1.5M wide and not exceeding 1.5M in depth and getting out in soft/loose soil for laying of under ground cable and foundation of poles.etc complete as specified and as directed.

All as per Item herein before but for additional 1.5m or part thereof in depth beyond the first 1.5 m foundation of poles.etc complete as specified and as directed.

Returning filling in including spreading, leveling watering and well ramming in layers not exceeding 25 Cm thick .etc complete as specified and as directed.

Removal of excavated surplus soil not exceeding 50 m and depositing where directed at al level not exceeding 1.5 m above the starting point and all as specified and as directed.

Supply and spreading clean dry sand in trenches for cushioning all as specified for cable protection in trenches / ducts complete all as directed. (Note: The punned down thickness shall only be measured)

Material and labour for brick sub class 'B' to be laid in trenches as protection to cable all as specified and directed.

M&L for road cutting /Hard standing for taking up or laying of LT UG Cable upto a depth of 15cm, after laying of cable well ramming to the excaved soil and repair the excavated portion of the road as existing or by providing suitable mixture of PCC complete all as specified and directed

M&L for Plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundation of steel poles/struts as specified including necessary form work all as specified and as directed.

M&L for cement concrete (1:2:4) type B1 with 20 mm graded aggegate for coping including form work and finishing to all exposed surfaces by using extra cement all as directed.

M&L for 50mm bore galvanized iron light grade pipe for cable protection complete with all fittings fixed to wall or laid in floor/road crossing or on pole, complete all as specified and directed

Supply and install steel tubular swaged poles complete with cast iron base plate, final taper plug, bolts, nuts and screws as specified type 410SP-31 (9.0 meter long) and including painting with two coats of aluminium paint over one coat of red oxide and black bituminous paint on the hidden surface in foundation including drilling of holes for fixing of D Iron clamp and holes for continous GI earth wire as required complete all as specified and directed by Engineer in charge

Supply and Lay 10 Sqmm 2 Core of 1100 volts grade LT UG Cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) with stranded aluminium conductor, laid in trenches/ducts, fixed on wall/inside panel, drawn through pipe complete all as specified and directed Note . Rate deemed to be inclusive of conecting up with control gear/ junction box including cable glands and cable lugs complete all as specified and directed by Engineer-in-Charge.

Supply and fix 100 W LED 6000K security / flood light, pressure die-cast aluminium housing with IP-66 protection, LEDs as light source with necessary accessories, including GI brackets made out of GI tube of 40 mm dia of length 1.5 mtr and necessary clamps and nuts and bolts etc complete all as specified and directed by Engineer-in-Charge. Make :Havells Cat No ENDURAPEARLPLUSSL100WLED757PASYTOPCLC or equivalent in Bajaj/ Crompton/ Phillips/ HPL/Syska

Supply and fix LED decorative post top lantern 35 Watt with IP 65 protection for 360 degree in direct light complete with all necessary connection all as specified and direted, Make :Havells Cat No CORALPT35WLED757PSYMTOPC or equivalent in Bajaj/ Crompton/ Phillips/ HPL/Syska

Supply and connect PVC insulated twin core copper cable PVC round sheathed (flexible) of 2.5 sqmm complete all as specified and directed by Engineer-in-Charge.

Supply and fix Rigid non-metallic PVC conduit of external dia 20mm inclusive of boxes, tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc.

Supply and Fixing Pole mounting junction Box (Looping Box) for street light for 3 Phase 4 Wire system with internal size 250 x 200 x 100 mm comprising of PVC connection and one MCB 6Amps including Mounting arrangment . Make :-Sintex /Havells /Spelsbary

S&F MCB distribution board sheet metal powder painted single pole & neutral enclosure with a two pin and earth plug and socket, one single pole MCB of 20 Amps complete all as specified and directed. Make :-Havells/Legrand/Schneider.

M&L for Sub main wiring complete with Two runs of 4 Sq mm Single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with One run of 4 Sq mm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper condutor cable as earth continuity conductor, drawn through and including suitable size of non -metallic rigid PVC conduit and conduit accessories on any type of wall including stone masonry, floors/fixed to ceiling etc., all as specified and as directed. Note: Two runs of 4.0 sqmm cable conductor, one run of 4.0 sqmm earth continuity conductor cable and one run of PVC conduit shall be measured as one unit length

SRI SAI RAM ENTERPRISES

Universal refrigeration and Engineering Company

K LAKSHMAN SINGH AND CO

THE DECAN ENGINEERING AND REFRIGERATION COMPANY