PROVISION OF LED FLOOD LIGHTS, POST TOP LANTERN AT NEW OTM COMPLEX AND PROVISION OF SOLAR WATER HEATING SYSTEM FOR CGOM, STATION GALLEY, INLIVING SAILORS MESS AT AERIAL BAY, DIGLIPUR

Amount

S&F flood light fitting rectangular LED type of size 120 Watts with thermal management system with die-cast aluminium IP 66 protection, resistant to impact and corrosion, glare free and better uniformity complete all as specified and directed. Make: Havells cat No. JETAIRISFLS120WLED757ASYMLTG or equivalent make in Philips/ Bajaj.

S&F post top luminaire LED type of 40 Watts with IP 65 protection, inverted pyramid tripod type LED bollard with soft 360 degree light distribution, resistant to impact and corrosion, glare free and better uniformity complete all as specified and directed. Make: Crompton cat No. LPTO-40-CDL or equivalent make in Philips/ Bajaj.

S&F lantern LED type of 10 Watts with IP 65 protection, inverted pyramid tripod type LED bollard with soft 360 degree light distribution, resistant to impact and corrosion, glare free and better uniformity complete all as specified and directed. Make: Crompton cat No. LBSN-10-CDL or equivalent make in Philips/ Bajaj.

Supplying, transporting, erecting and fixing steel tubular swaged poles type 410 SP-31 (9.00 metres long) complete with cast iron base plate, finial, taper plug, foundation bolts, nuts, screws and anchor plate as specified as per manufactures instructions, including necessary excavation and earth work, PCC 1:4:8 type D2 in foundations below pole, PCC 1:3:6 type C1 in around poles and 1:2:4 type B1 as in plinth block, disposal of surplus soil to a distance not exceeding 50 m and depositing where directed, painting steel tubular poles exposed surfaces with aluminium paint two coats over one coat of red oxide primer and providing 300 mm wide bands (3 bands/ strips with synthetic enamel paint and 2 pands with black bituminous paint) from plinth block and numbering poles, painting embedded portion of poles with one coat of bituminous paint complete all as specified and directed. Make: Bajaj or equivalent make in Philips / Havells / Wipro.

S&F LT junction box for security light, sheet moulding compound (SMC), hinged door type and locking arrangement, off white colour of size 140x140x95 mm (Make: Sintex) comprising aluminium busbar of adequate capacity and 6A SP MCB, 01 number bakelite base neutral link and 01 number earthing terminal bolt and nut and connecting up with 2 runs of PVC sheathed cable, multistranded of size 2.50 Sqmm in GI tubing 15 mm light grade with aluminium terminal lugs including suitable size MS clamps all as directed.

Supply, lay and testing XLPE insulated, cores laid up, PVC innersheated, armoured with galvanised steel strip, heavy duty LT UG electric cable with stranded aluminium conductor, 1100 Volts grade, extruded PVC Type ST2 sheathed, conforming to IS: 7098 (Part I) 1988 of cross- sectional area 16 sqmm 4 core .

Supply, lay and testing XLPE insulated, cores laid up, PVC innersheated, armoured with aluminium strip, glavanised wire, heavy duty LT UG electric cable with solid aluminium conductor, 1100 Volts grade, extruded PVC Type ST2 sheathed, conforming to IS: 7098 (Part I) 1988 of cross- sectional area 10 sqmm 2 core .

Excavating in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sq m on plan and not exceeding 1.5 mtr in depth and getting out in soft/ loose soil.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in soft/ loose or hard/ dense soil.

Removing excavated soil material not exceeding 50m and depositing where directed at a level not exceeding 1.5 mtr above the starting point

Supply and laying un-reinforced precast concrete cable cover Class LV, Type I, flat, size 250 mm x 150mm x 40mm

M&L for pulverised sand to fill width of trench for protection of cables including spreading and punning down including watering consolidation complete all as specified. Note: Thickness of sand cushion after punning down i.e. 18 cm shall be measured for payment.

Supply and laying of DWC (Double Wall Corrugated) HDPE pipe, ISI marked IS 14390 Part-II, of outer dia 50mm and inner dia 38mm with smooth internal and profiled external surface for non pressure underground cable including all connected accessories like coupler, 'O' Ring etc, for protection of cable complete all as specified and as directed. Make: Red Polyextrusion/ Telerex

Supply, installation, testing and commissioning of powder coated outdoor type (IP 65 protection) LT feeder pillar box fabricated out of 3.15 mm thickness CRCA sheet steel weather proof vermin proof and suitable for operation on 415 volts, 50 Hz, 3 phase 4 wire AC supply aluminium bus bar of capacity 100 Amps complete erected in PCC foundation all as directed by Engr-in-charge, including comprising the following items:- (i) MCCB TP 63 Amps, 25 kA - 01 No. (Incoming) (ii) MCCB TPN 32 Amps - 01 No. (iii) MCB SPN 6-32 Amps - 04 Nos (iv) 3 Phase digital voltage, current, Frequency, PF, KW, KVA, KVAR and KWh meter (v) Indicator lamps RYB - 01 set of 3 Nos (vi) Timer - 01 No. (Astro time switch) and contactor - 01 No. of 32 Amps.

M&L for earthing complete with Galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below GL) with top edge of earth plate not less than 1.5 Mtr below normal ground level, earth plate surrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt filled in alternate layers and electrode connections by using Galvanised earth wire 4mm dia and 7.50 mtrs connected by means of bolts, nuts, check nuts and washer of galvanised iron or steel, provision of 15 mm dia GI pipe medium grade for protection of GI earth wire and 20mm dia GI pipe medium grade for watering arrangement and PCC (1:3:6) , type C1 chamber, MS funnel, wire mesh, 50 mm thick RCC 1:2:4, type B1 earth pit cover with 6 Nos, 8 mm dia high strength deformed steel TMT bars on both ways including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to distance not exceeding 50 mtr, provision of charcoal and salt complete all as shown in electrical plate No. 3 of schedule Part-I (2009). Note: (i) Cost of GI earth wire and GI protection pipe upto 7.50 mtr length shall be deemed to be included in the rate quoted. (ii) The unit rate shall also include for wire mesh, funnel, excavation, PCC chamber pit, test point.

S&F 40 mm bore light grade GI pipe with complete fixing accessories required at site.

M&L for PCC Type B1, 1:2:4 (using 20mm graded granite stone aggregate) as in foundations, filling and mass concrete.

M&L for PCC Type B2, 1:2:4 (using 40mm graded granite stone aggregate) as in foundations, filling and mass concrete.

S&F MCCB 3 pole, 415 volts, fixed type, 25 to 100 Amps with breaking capacity 25 kA in existing LT panel.

M&L for Earthing complete with galvanised steel earth plate electrode of size 60cm x 60cm x 6mm thick burried directly in ground vertically at a depth not less than 2.25 mtr below normal ground level with top edge of earth plate at a depth not less than 1.5 mtr below normal ground level, earth plate surrounded from all sides by 15 cm thick and packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using galvanised iron strip of size 32 x 6mm means of bolts, nuts, check nuts and washers made of copper and protected by light grade 40 mm dia galvanised iron pipe connected to main switch board or main control board and GI pipe light grade 20mm bore for watering and including funnel, wire mesh, RCC pit cover and PCC chamber pit with PCC 1:2:4 type B-2 (including necessary excavation and earth work disposal of surplus soil to a distance not exceeding 50 mtr all as specified and shown on plate No. 3 of SSR Part-I (2009). Note: (i) Cost of galvanised iron strip and GI protection pipe upto 7.50 mtr length shall be deemed to be included in the rate quoted. (ii) The unit rate shall also include for wire mesh, funnel, excavation, PCC chamber pit, test point.

S&F test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hexagonal head screw all as specified and directed.

Supply, install, testing and commissioning of 'Solar Hot Water System' (Flat Plate Collector) based on indirect transfer of heat including backup stainless steel hot water tank duly insulated of capacity 100 LPD. Make: TATA or equivalent approved make.

S&F hot water pipe duly insulated with glass wool and aluminium cladding 15 mm bore.

S&F fibre washers for hot water taps of valve size 15 mm.

S&F 15 mm bore Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed.

S&F new 500 litres capacity (white colour) rotational moulded polythene water storage tank, (cylindrical vertical with close top) triple layer (ISI Marked) colour white both inside and outside with top cover hoisted and fixed in position where ordered and making necessary connection and testing complete all as directed.

S&F 20 mm bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed

M&L for 20 mm bore new steel water tubing medium grade (ISI marked) with all new fittings (ISI marked) fixed to wall and ceiling or laid in floors complete all as directed.

Cutting existing 25 mm bore steel tubing for alterations or additions in position without taking down (Each cut measured)

S&F 20 mm bore stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

S&F mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

M&L precast RCC Type B1, 1:2:4 (using 20 mm graded granite stone aggregate) as in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in CM 1:4, including necessary formwork complete. Note: Reinforcement shall be measured and paid separately.

M&L for high yield strength deformed TMT steel bars 10 mm dia and over as in reinforcement for concrete, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

M&L preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified.

CITY CONSTRUCTION COMPANYU

ANITA VARMA ENTERPRISES

M/s Bismi Builders & Enterprises

AR CONSTRUCTIONS