REPAIRS TO FLOOR, PLASTERING, JOINERY, PLUMBING, SANITARY FITTINGS ETC AT GEMINI AREA AT DALHOUSIE

Amount

Demolition of brick work or stone boulders masonary built in cement mortar including all quoins, arches as directed.

M & L for brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete as specified and directed.

M & L brick work with sub class 'B' bricks, straight or curved on plan to any radius, built in cement mortar 1:4 as in half brick thick walls complete as specified and directed.

Taking down chowkats with shutter n. exc 1.5 sqm each. (without taking of shutter from the frame) .

Taking down shutter of any description exc. 1 sqm but n exc 2 sqm.

Taking down shutter of any description n. exc. 1 sqm

Taking down chowkats or frame with shutter exc 1.5 sqm but not exc 4 Sqm each

Refixing shutter of any description n exc 1 Sqm each in the same opening including taking down and easing and adjusting

Refixing shutter of any description exc 1 Sqm and n exc 2 Sqm each in the same opening including taking down and easing and adjusting

S & F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified in SSR and as directed by Engr-in-Charge

S & F 30 mm thick Second class hard wood Plain, framed, panelled door shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats

S & F 35 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats

S & F 30 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as in windows, ventilators, etc. are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.20 (b)

S & F solid PVC door frames of sizes 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and as directed.

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail and bottom rail on either side and as gap insert for top rail and bottom rail , panelling of plain colour PVC sheet to be fitted in the MS framewelded/ sealed to the stiles and rails with suitable PVC sheet beading , and jointed together with solvent cement in the frame at site as per specification.

S&F galvanised mild steel wire cloth ,0.56mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned tacks,or galvanised wire steples.

S&F in repair galvanised mild steel wire cloth ,0.56mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned tacks,or galvanised wire steples.

S&F in repair 3mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 sq.m. each pane .

M&L PCC 1:3:6 type C1 (using 20 mm graded crushed stone aggregate) as in hold fast.

S & F M.S. Flat iron of size 25x3 mm as in hold fast and similar small articles, cut to length, bent to shape, drilled hole and fixed with screw etc. conforming to Fe-290 Gde-E-165 complete

S & F Aluminium alloy anodised sliding door bolt with hasp & staple ( bolt type) and fixing clipes of sheet, cast or extruded sections and fixing bolts of extruded sections cast aluminium alloy lenght of 250 mm.

S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section

S & F 100 mm long Aluminium, anodised, barrel tower bolts of extruded section

S & F 100 mm long medium weight, cold rolled mild steel Butt hinges.

S & F 75 mm long medium weight, cold rolled mild steel Butt hinges.

S & F aluminium handle 125 mm long anodised, cast type fixed complete.

S & F aluminium handle 100 mm long anodised, cast type fixed complete.

S&F in repair 300 mm long, mild steel, ordinary rat tail rod pattern springs incuding roller and roller plate complete as specified and directed.

Fixing only in repair 300 mm long, mild steel, ordinary rat tail rod pattern springs incuding roller and roller plate complete as specified and directed. (Note:-The material issued under Sch 'B' from B/R store for fixing)

M&L for Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer.

Dismantling timber scantlings 40sq.cm and over in section, in any position.

M&L second class hard wood clean sawn in scantling

S&F in repairs, stainless steel sinks with drainage board made of 1 mm thick sheet for kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm as specified

S & F in repair vitreous china squatting pan Orissa pattern size 580mm x 440mm white with integral foot rest including provision of lime concrete bedding, connection to trap and flush pipe etc as in floor all as specified and as sdirected.

S&F in repairs vitreous China wash down water closet pan (pedestal pattern) white, excluding flushing cistern & flush pipe .

Fixing only in repairs vitreous China wash down water closet pan (pedestal pattern) white, excluding flushing cistern & flush pipe . (Note:-The material issued under Sch 'B' from B/R store for fixing)

S & F vitreous china urinal, half stall type white with grating and union for discharge pipe down take pipe etc.

S&F in repair toilet paper holder of ( CP) chromium plated brass screw

Fixing only in repair toilet paper holder of ( CP) chromium plated brass screw (Note:-The material issued under Sch 'B' from B/R store for fixing)

S & F in repair 10 Ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve and brackets float and handle, and bracket.

Fixing only in repair 10 Ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve (exclsive brackets ) (Note:-The material issued under Sch 'B' from B/R store for fixing)

S & F in repair bib taps 15mm bore cast copper alloy chromonium plated with crutch or butterfly, handle, screwed down, screwed for iron pipe.

Fixing only in repair bib taps 15mm bore cast copper alloy chromonium plated with crutch or butterfly, handle, screwed down, screwed for iron pipe. (Note:-The material issued under Sch 'B' from B/R store for fixing)

S & F in repair stop valve15mm bore cast copper alloy chromonium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions.

Fixing only in repair stop valve15mm bore cast copper alloy chromonium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions. (Note:-The material issued under Sch 'B' from B/R store for fixing)

S & F PVC connection pipe 15mm size with PTMT nuts of 450 length including fixed in repairs.

S&F in repairs, self cleaning water jet, chromium plated, (HEALTHFUSET)15 mm bore with all accessories complete suitable for EWC as approved.

Taking up or down 15mm bore steel tubing and connection including cleaning for refixing or removel to store.

S & F in repair 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors .

Refixing to old steel tubing 15mm dia and connection in new or old position (wall ceiling floor etc.)

Taking up or down 20mm bore steel tubing and connection including cleaning for refixing or removel to store.

Refixing to old steel tubing 20mm dia and connection in new or old position (wall ceiling floor etc.)

S & F in 20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors in.

Demolition and breaking up to 110m bore drain pipes (SGSW/AC/RCC/PVC) set in CM complete all as specified and as directed.

S&F vitreous china wash basin white of size 550x400mm incl waste coupling bracket and PVC waste pipe incl taking down old and as specified and as directed.

S & F in repair 15 mm bore pillar taps fancy type cast copper alloy chrominium plated fancy typewith capstan heads, chromium plated, screwed down high pressure with or without lettered "Hot or Cold" with long screwed shanks and fly nuts screwed for iron pipe.

Fixing only in repair 15 mm bore pillar taps fancy type cast copper alloy chrominium plated fancy typewith capstan heads, chromium plated, screwed down high pressure with or without lettered "Hot or Cold" with long screwed shanks and fly nuts screwed for iron pipe. (Note:-The material issued under Sch 'B' from B/store for fixing)

S & F in repair towel rail 600mm long of chromium plated brass screw and wooden / plastic cleats .

S & F in repairs 110mm bore PVC Pipes single socketed, in any length with rubber ring joints, fixed to walls or laid in floor.

S & F in repairs 110 mm bore PVC (SWR) bends any radius.

S & F in repairs 110 mm bore PVC (SWR) vent cowl.

S&F in repairs Grating down 100 mm dia of PTMT 9 minimum weight 25 gm.

Taking down cement plaster of any description on brick walls/ ceiling etc including racking out joints, hacking for key, scrubbing down with water complete.

M&L rendering 15 mm thick on external surfaces of wall in cement mortar 1:4 all as specified and directed.

M&L rendering 10mm thick in cm (1:4)as in ceiling , soffit of chajja etc.complete all as specified.

M&L rendering 10 mm thick on internal surfaces of wall in cement mortar 1:6 finished even & smooth without using extra cement as specified and directed.

M & L preparing new plastered surfaces of walls and applying two coats of cement base paint.

M & L preparing new plastered surfaces of internal walls and applying two coats of distemper oil emulsion over a coat of primer.

M & L preparing new plastered surfaces of ceiling chajjas facia etc. and applying three coats of white wash .

M & L preparing new plastered surfaces of walls as required and applying a coat of distemper oil emulsion.

M & L preparing old plastered surfaces of walls as required and applying one coats of cement base paint

M & L preparing old plastered surfaces of ceiling as required and applying one coats of white washing.

Demolition of ground floors and paving n exc 15 cm thickness(below or above ground floor)

M&L for 100 mm thick Cement concrete type B2, M-15 (using 40 mm graded granite stone aggregate) in base of flooring/ hard standing finished evern & smooth without using extra cement..

M & L PCC M-10 type C-2 (50 mm thick as in plinth protection & finishing the surface even & fair without using extra cement complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises as directed

M&L for 15 mm thick in cement mortar 1:6 screed bed or bedding layer of mortar for laying floor finishes as directed.

M & L Rendering 10 mm thick in cement mortar (1:4) as in backing layer for laying of tiles in vertical surfaces complete all as specified & directed.

M&L for non skid cereamic coloured tiles 7 to 8mm thick (square/ rectangle) area of each tiles exceeding 0.11 sqm but n. exc.0.18sqm, in floor etc set and joined in neat cement slurry and pointed in white or .coloured cement to match

M&L for joint free non skid cereamic coloured tiles 8 to 10mm thick (square/ rectangle) area of each tiles exceeding 0.18 sqm but n. exc.0.36sqm, in floor etc set and joined in neat cement slurry and pointed in white or .coloured cement to match complete all as specified and directed.

M&L for glazed, coloured, ceramic, tiles of size (300mm x 200 mm) x 6 to 8 mm thick, on vertical surfaces, such as dadoes, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles all as specified and directed.

M&L for chequered cement concrete tiles With grey cement and pigments of size 25cm x 25 cm x 22mm thick, set jointed in neat cement slurry in floor .

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and mixed with pigment to match the shade of the slab including white marbal border line of 75mm wide including rubbing and polishing complete.

M&L for 25mm thick Granite (of any type) work in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for steel and iron work complete all as specified.

S&F wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165; complete all as specified and as directed.

Dismantling water tank and removing to stores exc 500ltr n.exc 1000ltr

Dismantling water tank and removing to stores exc250ltr n.exc 500ltr

S&F 1000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part I.

S&F 500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part I.

S&F 20 mm dia Ball valve PTMT valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule.

M&L preparation of new steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and directed.

Havish Construction

m/S Varun Gupta

M/s. Rishav Sood