Item 1 SITC of 2 Nos. Video Wall Near Jodhpur Choupati Sector 22 Near Ashok Udhyan Chopasni Housing Board Jodhpur

Amount

Outdoor LED Display –Display Size (W x H) LED Display of 12.5 feet X 9.44 feet Pixel Pitch 6 mm±5% or better, LED Configuration RGB 3 in 1 SMD ,LED Lamp Gold wired LED lamp ,Pixel Density Minimum 14400 pixels per sqm or higher Half Gain Horizontal / Vertical Viewing Angle H 140 deg / V 90 deg or better ,Refresh Rate >1920 Hz or better Temp Range -20 to +50 Degrees C or better Grey Scale Processing 14 Bit or better Colours 4.4 Trillion colours Brightness 5000 cd/m² or better Maximum Power Consumption 900 w/sqm or lower Dimming Capability 255 levels Power Input 100 ~ 240 VAC Contrast Ratio 3000:1 or better Access For Maintenance Front IP Level Front : IP65 , Rear : IP 65 LED Tile/ Cabinet Calibration LED tiles/cabinets should be calibrated before being supplied. These screens should also be calibrated after the installation to ensure brightness uniformity. Calibration should also be performed as and when it is required during the warranty period. Offered product which does not support dot calibration shall be rejected Brightness measurement tool Emitted brightness measurement tool namely a luminance meter (which can provide direct brightness reading in cd/m²) for brightness measurement of offered LED screen. OEM of LED Display should provide details (Model No. & Date of Purchase) of the luminance meter available with them in India along with its latest calibration certificate. The same instrument shall be used to check the minimum brightness levels as offered in the bid. Please note- Illuminance meters are not acceptable as they are not for measuring emitted light International Safety Certifications( Mandatory to submit along with the bid) BIS Registration (Bureau Of Indian Standards) As per Standard: IS 13252 ( PART 1) :2010. Offered model BIS certificate should be on OEM brand and their own manufacturing unit in India. Valid BIS certificate to be provided for the offered LED tiles/cabinets. BIS certificate for led module only shall not be considered as valid BIS certificate for the product. The offered model should be clearly mentioned in the BIS certificate. This certificate shall be submitted at the time of bid. Quality/Health & Safety/Environmental Certifications of OEM/OEM subsidiary in India ( Copy to be submitted along with the bid Quality Management System 9001:2015 , Occupation health & Safety Management System - OHSAS 18001:2007 Environmental Management System 14001: 2015 Preferable Makes ::Barco/Daktronics/Delta /Mitsubishi /NEC

LED Control System Control Port RS232/ LAN Signal Interface 1x HDMI, 1x DP1.2 Connectivity to Display RJ45 Minimum Load Capacity Should be able to support the offered LED screen Preferable Makes Barco/Daktronics/Delta /Mitsubishi /NEC

Multi Media & Content Management System Power Consumption < 15 W Power Supply 100~240 V AC Network Connectivity WiFi: 802.11 AC Storage Minimum internal storage 16 GB Output Ports 1 x CAD6 ,1XEthenet Input Ports 1 x HDMI, 1 x Line Input, 1 x USB 2.0 ( Type A), micro SD card slot, RJ45 with POE, RS 232, 1 x USB 2.0 ( Type C) Minimum Media Formats Supported Images: JPEG, PNG, BMP: Video: MP2, MP4, 3GP, AVI, MOV, WMV: Audio : MP3, WMV, AAC Display Resolutions Should support HD. Annotation Should be supported Signage & Content Manager (Software & Hardware) To be able to create playlists and send them over the network to media players or more for playout based on schedule and sequencing. This software to be loaded on suitable hardware to be supplied by the vendor. Solution Compatibility Complete solution ( LED display , LED control system , Multimedia & Content Management system )should be from same OEM/ Brand to avoid the compatibility issue at the later stage Preferable Makes Barco/Daktronics/Delta /Mitsubishi /NEC

Mechanical Structure For Mounting Of LED Wall Mounting Structure LED wall should be mounted on building façade /customized structure. Structure should be earthed properly and provided.Material Should be made from mild steel and painted black along with antirust coating.

Auto Brightness Sensor Rated voltage 5V ,Operating temperature -30℃~70℃ ,Operating humidity 0~99% ,Brightness range 0~65535 lux ,Cable 5m ,Features • Monitor the ambient brightness to achieve automatic brightness adjustment of LED display • Asynchronous • Outdoor use proofing • No external power supply required

Scope for Installation Complete Supply, Installation, Configuration, Testing and Commissioning of all the delivered equipment with necessary cables and accessories

Structure Supply and provinding Brackets as Outdoor wall mounted/unipol, front maintenance led wall , structure installation, structure painting, led mounting brackets, led mounting hardware , led Screen outer border (ACP sheet border) with connectivity as per OEM drawing.