Modernization of Government ADW PG College Boys Hostel Ponneri at Ponneri Town Panchayat in Tiruvallur District Pac.02

1. MODERNIZATION OF GOVERNMENT ADW PG COLLEGE BOYS HOSTEL PONNERI @ PONNERI PANCHAYAT IN THIRUVALLUR DISTRICT UNDER CSR

Brickwork in cement mortar 1:5 mix using country bricks including cost and conveyance of all materials to site mixing, palcing, curing and all labour charges etc. completed.

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work.

Plastering in CM 1:5 mix, 12mm thickness including cost and conveyance of all materials to work site from approved quarry sources and labour charges etc. completed.

Supply and Fixing of mosquito net including all cost of labour charges As per Market Rate

Distempering the old walls and ceiling one coat with best oil bound distemper of approved quality including preparation of surfaces (the colour and quality should be got approved by the Executive Engineer before use) the rate includes cost of brushes, high scaffolding charges, neat finishing, cost of brushes etc., complete complying with standard specification and as directed by the Departmental Officer

Re Painting the walls with Two coats with first class quality Plastic Emulsion paint of approved colour over a priming coat including thorough scraping, clean removal of dirt. The rate includes cost of brushes, sand paper, plaster of parries, putty wherever required and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer (the colour and quality should be got approved by the Executive Engineer before use) S I No 358

Painting the old iron works two coats with syntactic enamel paint of approved quality and colour including ordinary scraping using brushes and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer (the colour and quality should be got approved by the Executive Engineer before use)

Floor finish and dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Clay Tiles / Cuddapah Slabs

Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two crushed stone M.Sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.

Flooring with following ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three M.Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Pointing for Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3

Paving the floor with best approved quality flamed steel grey granite slab of size 1200 x 600 of 16/18mm thick of Synthetic Grey, Paradise and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone M.Sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

Paving the floor with kota stone slab of size 600 x 600 of 18 / 20mm (un-polished) in all floors laid in of cement mortor 1:3 (one cement three M.Sand), 20mm thick and pointed with colour cement neatly including polishing with polishing stone and oxalic acid etc., so as to perfectly smooth and glossy and including hire charges for polishing machine and power consumption charges etc. The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

Supply and providing 1000 litres capacity Priming Tank made up of PVC.

Cement Concrete 1:4:8 (One Cement, Four M.Sand and eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick, well rammed, consolidated and curing etc. complete complying with standard specification

Plain Cement Concrete 1:2:4 using 20 mm gauge Hard Broken Granite stone jelly for foundation including cost and conveyance of materials to site and labour charges for laying, watering and compacting etc. completed.

Provision for Sanitary Arrangements

Provision for IWC

32mm PVC Pipe

32mm PVC Pipe Elbow

110mm dia PVC pipe (AGL)

110mm Dia PVC ELBOW

supply and Fixing of PVC Door

Repair to Door and Windows

Supplying and fixing PVC Rain water down fall pipes of following dia meter etc., complete.

ELECTRICAL ARRANGEMETS

Supply and fixing of 4'-18W LED tube with fitting inclusive of all charges SD NO : 444-

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150mm x 100mm x 113mm TW switch box with 3mm thick hylem sheet cover for 5A 3 pin non inter locking wall socket with 5A flush type switch with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point SD38

Supply and fixing of 1200mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18") SD 106

Supply and fixing of WT bulk head fitting with guard suitable for 11W CFL lamp with CFL (SD N0.83)

Supply and Run of 2 of 2.5 sq.mm (36/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade on 7/20 GI wire for service connection mains

Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in 25mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains SD 70

Supply and fixing of 3 Nos. 5A (3 pin and 2 pin) combined flush type wall socket with control switches concealed in suitable TW box covered with hylem sheet in flush with wall with earth connection (for computer plug socket) SD 139

Supply and fixing of 5A 3 pin and 2 pin combined flush type wall socket with 5A flush type switch concealed in suitable MS box in flush with wall SD 134

Supplying and fabricating and fixing MS grill works to windows and grill gate using necessary MS flst for inner and outer members should be fixed to window frames specification.

Supplying and fixing colour galvalume sheet roof of 0.47mm thickand steel tubular box section of 100x50x3mm of 1meter interval including priming coat fixing in position with all necessary accessories complete complying with standard specification and as directed by the departmental officers. specifications and as directed by the departmental officers. Rate for 10m2.for the following items

Supply for laptops Central Processing Unit Intel core i3 , memory 8 GB , Display 16 " Screen size, resolution 1920x1080 Full HD and panel Storage 512 Gb, battery life runs on a Single charges

Printer specifications cover core metrics defining performance, such as technology type (Laser/Inkjet), speed (PPM/IPM), resolution (DPI), and connectivity (USB/Wi-Fi). Key details include duty cycle (monthly volume), duplexing capabilities, paper handling (tray capacity), and memory

Supply and fixing RO plant is a commercial/industrial water purification system designed to produce 200 liters of purified water per hour, suitable for offices, restaurants, and schools. It typically features stainless steel or FRP construction, 5-6 filtration stages, 1-2 membranes, and treats up to 1500-3000 PPM TDS.

Hostel single beds are designed for durability and space efficiency, typically featuring dimensions of 6x3 feet (72x36 inches) with heights around 18 inches. Constructed primarily from mild steel (MS) pipe or heavy-duty iron with powder-coated finishes, these beds often feature 16-18 gauge metal for stability and may include built-in box storage or foldable options for versatility.

Hostel double cots, often referred to as bunk beds in shared accommodations, are typically constructed from high-quality mild steel (18-20 gauge) for durability, featuring a, 6x2.5 or 6x3 feet dimension per bed. They usually come with built-in ladders, side railings for safety, powder-coated finishes, and are designed for 300+ kg load capacity.

Supply and Fixing Dining table set for 6-8 person with Extendable Kitchen table with 2 Benches with Metal Frame and Mdf wood board .( Dining Table or Study Table)

Supply and Fixing of Waiting area design requires balancing comfort, functionality, and aesthetics, with a general space allocation of 20–35 sq. ft. per person. Key specifications include ergonomic seating (16–18" seat height), durable materials (vinyl/carpet), ample natural light, clear traffic flow, accessible power outlets, and a visible, welcoming reception desk.

Supply and run of 2 of 2.5 sq.mm. (22 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour(SD-55)

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with modular MS switch box, base frame and covering plate and 6A FT modular switch and making good of the concealed portion with suitable colour for PVC concealed light/fan point.

Supply and fixing Round ceiling light design specifications focus on modern, minimalist aesthetics with high-efficiency LED technology, generally categorized into surface-mounted for solid ceilings.

Supply and fixing sport equipment parks, often known as open gyms or play areas in Chennai, feature diverse equipment for public use, including ellipticals, air walkers, and rowing machines

Parallel Bar

Single Bar

Arm Wheel

Double sit up board

Sky Walker

Provision for Nme board Charges

GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)

Please Enable Macros to View BoQ information