Supply and Construction of Devp of Upper Maratha Ground (1 x Reception Hall incl MI Room, Office, 1 x DSLS (OR) with central Heating and 1 x OJS Shelter)

Supply and Construction of Reception Centre incl MI Room, Office (Job No 2676A) Superstructure Supply & construction of Hybrid Pre- Engineered Double Storey Building (RECEPTION HALL) will be made of Light Gauge Steel Frame Structure (LGSF) Technology of size 15m x 15m with 3.00m height with MI Room & Office partitions & internal & external staircase with railing (two each) including 4 side covered Slope roof, steel staircase with Designer SS handrails The main wall and partition wall if any, will be made up of 50mm thick Rockwool insulation Panels. The Mezzainine Floor shall be with 1.0 mm Thick Galvanized Deck sheet. Layout of partition wall of ground and first floors, if any, will be as per the respective floor plans attached. The roofing will be made of 0.60mm PPGI red colour coated sheets. Internal & partation Walls shall be provided with 12.5mm Gypsum Board and External wall of the Building shall be provided with 8mm thick compressed heavy duty/premium fibre cement Boards over whic h8mm fibre cement siding planks will be fixed duly painted by two coats of weather shield paint. The core material is Rockwool 50mm for insulation and Vapor barrier/breather foil will be used in exterior walls for moisture control of Building all boards fixed with structural frame. Detailed specification are att as per Appx 'A. Store list of constr mtrl and elect items attached as per Annx I. Notes:- 1. Foundation such as Plinth Beam, Footings, Padestal, Slab etc :- Pre- Engineered Double Storey Building include Precast RCC Foundation will be constructed by using vertical cast vibration technology (Dry Cast). All precast elements of Foundation such as Plinth Beam, Footings, Padestal, Slab etc will be machine/factory designs vetted by Structural Engineer of any of the Indian Institute of Technology (IITs/NITs) which will be submitted in the form of a signed copy of the designs & the structural engineer will be responsible for authenticity of strength & stability of the foundation of column. Only precast foundation to be used. 2. Roof Insulations: 50mm thickness of rock wool insulation of density 48kg/m3 with aluminum foil shall be used as filler between the outer and inner skin of pre-painted galvalume/ galvanized profile sheet 3. False Ceiling: Minimum 4mm thick Fibre Cement Board Decorative Tiles shall be used for false ceiling of the rooms, varandah bathroom and Toilet Blocks in grids of size 60x60cm. 4. Glazing (Glass Wall and Glass Door) Wherever shown in the drawings glazing of clear/tinted glass 5/6mm toughened glass to be provided 5. EIectricaI Networking and Fittings: All Electrical Fittings will be provided by the bidder. 6. External Security Lights: Four LED Street lights 50W each to be fixed on external walls of the building. 7. Lightening Conductor & Earthling :as per Bldg requirement will be provided by the bidder. 8.Design and Drawings. The firm shall design the structures on the basis of soil investigation report and shall submit detailed design including all drawings duly vetted by any of the IITs. The drawings so submitted must accompany the structural stability certificate and a certificate stating that all departmental requirements are met. The detailed drawings submitted shall include entire architectural /structural drawings (one original set and three copies) including foundation/ footings/ columns layout plan, beams, roof/flooring and Parapet wall, design calculation/details and steel details of footings, columns, beams, roof, floor and structural steel of bldg. Also, drawings like electrical and plumbing layout of the building shall be included. A 3D WALK THROUGH MODEL (External: covering all the buildings and landscaping, and internal walkthrough covering layout and finishes) shall also be made as per actuals based on the approved architectural drawings under engineering scope of work. Firm shall submit the following soft copy in CDs along with final drawings: (i) Input data file, STAAD file, Design I/P file soft copy along with excel sheets. (ii) Design Folder (One set of Hard copy and one set soft copy in CD). (iii) All Drawings on Auto Cad. All the above structural calculations, designs and arch drawings must be vetted and signed by an authority not in personal capacity, but on behalf of the institution and submitted to the Accepting Officer as per the timelines of the project. The third party vetting the designs/drawings shall also be liable for ensuring that the designs and drawings produced are in compliance as per laid down standards, regulation and sound engineering practices. 9. Design Consultancy QR.For architectural and structural designs, mechanical, electrical, plumbing design/ drawings and other services required under Engineering scope of the work, the contractor will be permitted to source his designs and drawings from single consultant or multiple consultants as under: (i) Consultants approved by IITs/NITs/Govt Engr Collage, Or (ii) Suitable professionals with Qualification Requirement as stipulated and employed in his own organization, Or (iii) Any other consultant meeting the Qualification Requirement as stipulated to be nominated by the contractor for the subject work. 10.For the purpose of engineering phase of the Contractor shall enter into MoU with Consultant(s) immediately on acceptance of the contract and shall submit the same to accepting officer for his record.

Fire Alarm System Individual standalone plastic body smoke alarm with adequate provision for fixing on wall / ceiling / roof. The unit to have sensor capable of covering area >40m2 and actuating an inbuilt alarm with loudness minimum 80 DB. Smoke alarm be powered by 9 Volt lithium batteries with an arrangement to test the battery and indicator to warn for low battery, including supply two Nos of battery (Make :- Fire End/AFO/Safe Guard).

Individual standalone plastic body heat alarm with adequate provision for fixing on wall / ceiling / roof. The unit to have sensor capable of detecting fixed temperature of 58oC and actuating an inbuilt alarm powered by 9 Volt lithium batteries with an arrangement to test the battery and indicator to warn for low battery, including supply two No of battery. (Make :- Fire End/AFO/Safe Guard)

Fire ball extinguisher of 1.3 Kg wt with suitable provision for wall mounting and capable of self activating on contact with flames. The unit to be maintenance free, non toxic, environment friendlye, and suitable for all type of fires. (Make :- AFO/Kanex/Fire Stop/Elide/Fire End/Safe Guard or equivalant)

Labour cost on Fire Alarm System

Furniture Patient Bed (Fowler) of size 2050 to 2200 mm, facility of braking and locking mechanism should be provided in castor roller,

Steel Bed side Locker of size 1000mm X 1520mm X 450mm, comlete all as specified in tech specification

Study chair of size length 56 Cm, Height 82 Cm and Width 56 Cm, Type : Lacquered finish with arm, seat and back cushion, velvet upholstery (Make :- Supreme or ISI equivalent)

Study Table of size 4' X 2', Wooden top on round tube structure with three drawers on one side.

Modular Extendable Conference Table Prelam MDF board with laminate on one side table Top Wooden/Engineer wood understructure with 25mm table top thickness

Confrence revolving chair with synchronic tilt mechanism and seat adjustable

Water dispenser of 230 V 500 watts without refrigerator with normal cold and heating capacity of 5 ltrs/ hour with storage compartment and auto shut off facility (Make: VOLTAS/ LG/ USHA/ISI equivalent)

Cupboard / wooden book case made up of commercial block board MR Grade conforming to IS 1659 and 5 shelves and design of bookcase-Openable doors with glass panel

Shelving Racks (adjustable type) confirming to IS 1883 Open-type, Overall height of racks-minimum 1575mm & overall depth-400mm

Revolving counter chair, Hight adjustment-with hydraulic, Frame and support made of charome plated MS Tubes, padestal base aluminium dia cast with foot rest

Waiting area chair 3 men seater material of chair mainframe-SS 304

Study Table of size (900x600x750mm) 18mm thick prelaminated partecle board side pannel with 25.4mmx1.2mm thick round ERW tubes-31.8mmx1.2mm thick ERW tubes-31.8mmx1.2mm thick round ERW tubes and 28.6mm x1.2mm thick and welded together and hooks of 2mm thick MS sheet.

Locker/Almerah Steel of size 1200mm X 900mm x 450mm made with 1mm thick steel sheet. Half of locker shall have hanging space. Hanging portion shall have 20mm dia fhromium plated steel conduit pipe 1.6m.

Single seater sofa inner size 21" x 22" , 12mm plywood should be used for seat base, Back seats-Form with a thickness of 4" and seating seats - form with a thickness of 5". (Make : Seventh Heaven / Westido/ Bharat Lifestyle/ISI equivalent)

Three seater sofa with leatherite cover inner size 60" x 84" , 12mm plywood should be used for seat base, Back seats-Form with a thickness of 4" and seating seats - form with a thickness of 5". (Make : Seventh Heaven / Westido/ Bharat Lifestyle/ISI equivalent)

Wooden Centre Table size 112 x 58 x 45 cm, brass design on the Top, covered with transparent glass and netural finish. (Make :- Supreme /ISI equivalent)

Medical Oxygen Gas cylinders - steel (Normalized) with 10 L capacity

Mobile folding ward screen having 3 folds without curtain

Patient folding wheel chair with minimum load capacity 120 kg

Round office reception plywood table with sunmika top of size 10' x 10' with 4 seater capacity as per buyer requirement

Fd Heating System (DS) Panel Radiator: Supply of wall mounted steel panel radiators of Heat output of 3200 kcal/hr,colour), baked in high gloss finish with and including all necessary fittings as per NE 442 standards , M.S made radiator has both core and tank made of mild steel. The radiator supplied should transfer heat from the fluid inside to the aire outside. The radiator will have thermostat control sensor to control the room temparature, Make: Eurotherm/Maktek/Bharat Works/ISI equivalent.

Boiler: Supply of vertical fire tube boilers (Heat output of 50000 Kcal/hr) (58.02 KW/hr) with stainless steel dampers. The boiler will run on HSD/Kerosene and will be rated as per the heat load calculation. The presure rating should be upto 160 pai. Now Emissions should not exceed 30 ppm. The working temperature should be upto 195 degree pehrenheit. The efficiency of Boiler should be not be less than 90% Make: Bharat Works inc of Model No: CH-70L of 50000 Kcal/hr heat output or of equivalent in Eurotherm/Rieffo/ISI equivalent.

Coolant anti freeze: Supply of anti freeze coolent Make: Servo/ISI equivalent.

Burner : Supply of Fuel Burner with the heat out put of 35 KW/hr. Fuel burner should be complete with and incl ON/OFF system fitted properly to the fuel tank, thermostat. The burner will have air/fuel control adjutment and a proper fuel pressure pump. All necessary safety features like flame failure, overflow of oil etc should be incorporated in the burner. Make: Bharat works incl/Made in India/Bentone (Made in sweden)/Cibunigas/Riello (Made in Italy) should have electronagnetic compatibility directive 2014/30/UE all connected E/M items.

Supply of expansion tank PVC 200 Ltr capacity Make Bharat works Inc/Eurotherm/Sintex /ISI equivalent.

Pump: Supply of single phase monobloc/Gland less pumps for circulating hot water throughout the system. Max flow 14 USGPM. Max Head 16 feet. Should withstand temperature range 15 degrees celisius to 115 degree celisious. The pump should be cast from madewith Stainless Steel Shaft. The Pumps will have mechanical seals capable of withstanding high temperatures of the water/anti freeze. Make wilo/Grundifoos/ISI equivelant.

Chimney: Supply of Chimney should be of MS make which will be of a dia of 4 inch. Height of chimney should be be 9ft. Pre- Painted. Properly installed on the collar of Boiler, Make Bharat works inc ISI equivalent

Supply of fuel tank of PVC having the capacity of 200 Ltr, The tank will be Pre-Painted. Make : Sintex/Vectus /ISI equivalent

Provision of PPR pipe of different diameters (20MM, 32MM) Pn16, Should be having an operating pressure from 6 to 26 Bars. The piping will be checked for any leaks under a pressure of 26 bar, Pipes used should have low thermal penetrability.

Supply of 25 mm thick glass wool Insulation superior quality for PPR pipes wherever it is exposed.

Supply of vertical fire tube boiler with and incl burner having capacity of 5 KW/hr heat output. The boiler will run on HSD/Kerosene and will be heating 250 ltr cold water in 15-20 min. Make : Bharat works inc of Model No: HW-250L or of equivalent in Eurotherm/Riello/ISI equivalent.

Supply of Service cable PVC insulated aluminium conductor, 1100V grade heavy duty servewith inner sheathing of PVC tab and overall PVC sheated in service connection 10 Sqmm 2 core (Make : Havells/Finolex/Plaza/ISI equivalent).

Distribution box 4 way SPN, 240 volts cooper bus bar and neutral link earthing stud conforming to IS-13032 & IS - 8623 double door type. (Make : Havells/Legrand/L&T/ISI equivalent)

MCB SPN 240 Volts 32 Amps ( Make : Havells/L&T/Standard/ISI equivalent)

MCB SP 6 Volts 32 Amps ( Make : Havells/L&T/Standard/ISI equivalent)

PVC tape 19mm wide 5 M long (Make : Steelgrip/Anchor/Kinjal/ISI equivalent)

Cable PVC insulated electric cables(heavy duty) 1100 volts grade multi standard copper conductor of size 1.5 Sqmm single core (FRLS) confirming to IS 1554 (Part-1) 1988 (Make : Havells/Finolex/Polycab/ISI equivalent)

Cable PVC insulated electric cables (heavy duty) 1100 volts grade multi stranded copper conductor of size 4 Sqmm single core (FRLS) confirming to IS 1554 (Part-1) 1988 (Make : Havells/Finolex/Polycab/ISI equivalent)

PVC casing capping of size 3/4 medium Grade (snow white) (Make : Anchor/SSK/CONA)

Switch Piano 5 Amp 230 Volts Flush type one way (Snow white) ( Make : Anchor/SSK/CONA/ISI equivalent)

LED tube light fittings 15W 230V box type 4 feets with CRCA body pre coated white and Prewired for LED tuble complete (Make : Havells/Bajaj/Philips/Cromption/ISI equivalent)

Screw full thread 6 x 19 mm ISI Marked, 200 Nos Pkt

PVC Switch board (snow white) size 7" x 4" for sockets and switches/DB (Make : Supreme/Polycab/Finolex/ISI equivalent)

PVC switch board (snow white) size 8" x 10" for main switches/ DB (Make : Supreme/Polycab/Finolex/ISI equivalent)

PVC "L" bend and "T" junction joint for PVC casing and capping confirming to IS 3419 (Part 3 ) (Make : Supreme/Polycab/Finolex/ISI equivalent)

Switch Socket combination(Snow White) Multipurpose 2 in 1, 15 Amp 230 Volts (Make : Anchor/SSK/CONA/ISI equivalent)

Service bracket 40mm dia GI Tubing medium grade 1.5 Mtr Long (Make : Jindal/Tata/Kalinga/ISI equivalent)

Labour cost on constr of Fd Heating System

Construction Material for Boiler Room Cement 43 Grade OPC packed in HDPE bag each 50 Kg wt conforming to IS 8112 - 1989 (Birla Gold/Ambuja / Ultratech/ISI equivalent)

Coarse sand free from vegatative materials

Coarse aggregate 20mm graded

Coarse aggregate 40mm graded

Hardcore 63 to 90mm

Mild steel framed work such as truss, rafter, purlins & MS plate (Make : TATA/ SAIL/ JSW/ISI equivalent)

Mild Steel Bars of size 6 to 8mm dia conforming to IS 432 (Part- I) 1982 (Make : TATA/ SAIL/ JSW/ISI equivalent)

Mild Steel Bars of size 10mm & above dia conforming to IS 432 (Part- I) 1982 (Make : TATA/ SAIL/ JSW/ISI equivalent)

The pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick an colour having a tensile strength 550MPa of size 10' x 3' ( for Roof & Wall ) Make Unik/ Jindal / Mectec/ISI equivalent.

The pre painted galvalume aluminium zinc coating GI based plain steel 0.50 mm thick an colour having a tensile strength 550MPa. Make Unik/ Jindal / Mectec/ISI equivalent.

Mild steel self drilling screw with washer size 3" (ISI Marked) (100 Nos/ Pkt)

Anti corrosive red oxide zinc chromate primer confirming to IS 5-2004 (Make : Berger / Asian / Nerolac/ISI equivalent)

Synthetic Paint enamelled Black confirming to IS 5- 2004 ( Make : Berger / Asian / Nerolac/ISI equivalent)

Painting Brush 3" (ISI Marked)

MS nut and bolt of length 100 mm fully thread

MS nut and bolt of length 0.45 m, 12 mm dia nuts and washers for fdn bolt.

Iron welding rod confirming to IS 814- 2002 (ISI Marked) 3.15mm thick. (100 Nos / Pkt)

MS Binding Wire

Labour cost on constr of Boiler Room

Supply and Construction of Double Storey Living Shelter (OR) with central Heating (Job No 2676C) Superstructure, Constr Mtrl, Internal & External Electrification & Lightning Conductor Supply & construction of Hybrid Pre-Engineered Double story Building (ORs Living Shelter) as shown in the drawings. Double storey living will be made of Light Gauge Steel Frame Structure (LGSF) Technology with precast/Cast in situ RCC foundation of size 24.00m x 6.00m with 1.5m wide verandah including 4 side covered Slope roof, Staircase with Designer SS handrails The main wall and partition wall if any, will be made up of 50mm thick Rockwool insulation Panels. The Mezzainine Floor shall be with 1.0 mm Thick Galvanized Deck sheet. Layout of partition wall of ground and first floors, if any, will be as per the respective floor plans attached. The roofing will be made of 0.60mm PPGI red colour coated sheets. Internal & partation Walls shall be provided with 12.5mm Gypsum Board and External wall of the Building shall be provided with 8mm thick compressed heavy duty/premium fibre cement Boards over which 8mm fibre cement siding planks will be fixed duly painted by two coats of weather shield paint. The core material is Rockwool 50mm for insulation and Vapor barrier/breather foil will be used in exterior walls for moisture control of Building all boards fixed with structural frame. Detailed specification are att as per Appx 'A. Store list of constr mtrl and elect items attached as per Annx I. Notes:- 1. Foundation such as Plinth Beam, Footings, Padestal, Slab etc :- Pre- Engineered Double Storey Building include Precast RCC Foundation will be constructed by using vertical cast vibration technology (Dry Cast) or Cast in Situ All precast elements and Cast in Situ of Foundation such as Plinth Beam, Footings, Padestal, Slab etc will be machine/factory designs vetted by Structural Engineer of any of the Indian Institute of Technology (IITs/NITs) which will be submitted in the form of a signed copy of the designs & the structural engineer will be responsible for authenticity of strength & stability of the foundation of column. 2. Roof Insulations: 50mm thickness of rock wool insulation of density 48kg/m3 with aluminum foil shall be used as filler between the outer and inner skin of pre-painted galvalume/ galvanized profile sheet 3. False Ceiling: Minimum 4mm thick Fibre Cement Board Decorative Tiles shall be used for false ceiling of the rooms, varandah bathroom and Toilet Blocks in grids of size 60x60cm. 4. Glazing (Glass Wall and Glass Door) Wherever shown in the drawings glazing of clear/tinted glass 5/6mm toughened glass to be provided 5. EIectricaI Networking and Fittings: All Electrical Fittings will be provided by the bidder. 6. External Security Lights: Four LED Street lights 50W each to be fixed on external walls of the building. 7. Lightening Conductor & Earthling : As per Bldg requirement will be provided by the bidder. Notes:-Incl Design Consultancy QR incl IIT Vetting, Design Mix, Soil Testing and Consultants approved by IITs/NITs/Govt Engr Collage8.Design and Drawings. The firm shall design the structures on the basis of soil investigation report and shall submit detailed design including all drawings duly vetted by any of the IITs. The drawings so submitted must accompany the structural stability certificate and a certificate stating that all departmental requirements are met. The detailed drawings submitted shall include entire architectural /structural drawings (one original set and three copies) including foundation/ footings/ columns layout plan, beams, roof/flooring and Parapet wall, design calculation/details and steel details of footings, columns, beams, roof, floor and structural steel of bldg. Also, drawings like electrical and plumbing layout of the building shall be included. A 3D WALK THROUGH MODEL (External: covering all the buildings and landscaping, and internal walkthrough covering layout and finishes) shall also be made as per actuals based on the approved architectural drawings under engineering scope of work. Firm shall submit the following soft copy in CDs along with final drawings:(i) Input data file, STAAD file, Design I/P file soft copy along with excel sheets.(ii) Design Folder (One set of Hard copy and one set soft copy in CD).(iii) All Drawings on Auto Cad.

Labour cost on Constr of Superstructure, Constr mtrl, Internal & External Electrification & Lightning Conductor

Furniture Double sleeping Bunk alongwith Rexene sleeved Matress of Make :Kurlon/Sleepwell/Corform /ISI equivalent, complete all as specified in tech specification

Steel Bed side Locker of size 1000mm X 1520mm X 450mm, comlete all as specified in tech specification

Study chair of size length 56 Cm, Height 82 Cm and Width 56Cm, Type: Lacquered finish with arm, sear and back cushion,, velvet uphostery (Make: Supreeme or ISI equivalent) As per photograph of sample attached.

Table 900 x 600

Water Dispenser of 230 V 500 Watts without refrigerator with normal cold and heating capacity of 5 lts/hour with storage compartment and auto shut off facility. (Make: VOLTAS/LG/USHA/ISI equivalent)

Toyotomi Automatic Kero Room Heater, Omni 230, Igniiton-Automatic, Height-60 centimeter, Weight-14 Kilogram, Burning Time/Tank->=14, Width-46 Centimeter, Type of Tank-Integral, Max. Temperature Range (To be self certified by the OEM) - Upto -30 degree C, Fuel Consumption (Less than) in Ltr/hr-<=0.6, Tank Capacity->=7, Depth 46 centimeter, Ignition-Automatic, Heating Capacity (sqft)-800, Pollution-Non-Toxic fume, Removable Fuel Tank-Fixed Tank & Guarantee-1 Year and all as per Technical specifications

Plastic dustbin of capacity 40 ltr (Make: NEELKAMAL/CELLO/SUPRELE/ISI equivalent)

Labour cost on Furniture

Fire Alarm System Individual standalone plastic body smoke alarm with adequate provision for fixing on wall / ceiling / roof. The unit to have sensor capable of covering area >40m2 and actuating an inbuilt alarm with loudness minimum 80 DB. Smoke alarm be powered by 9 Volt lithium batteries with an arrangement to test the battery and indicator to warn for low battery, including supply two Nos of battery. (Make :- Fire End/AFO/Safe Guard/ISI equivalent)

Individual standalone plastic body heat alarm with adequate provision for fixing on wall / ceiling / roof. The unit to have sensor capable of detecting fixed temperature of 58oC and actuating an inbuilt alarm powered by 9 Volt lithium batteries with an arrangement to test the battery and indicator to warn for low battery, including supply two No of battery. (Make :- Fire End/AFO/Safe Guard/ISI equivalent)

Fire ball extinguisher of 1.3 Kg wt with suitable provision for wall mounting and capable of self activating on contact with flames. The unit to be maintenance free, non toxic, environment friendlye, and suitable for all type of fires. (Make :- AFO/Kanex/Fire Stop/Elide/Fire End/Safe Guard or ISI equivalent)

Fire extinguisher of 2 kilogram capacity, ABC type conforming to IS-13849 along with its accessories

Fire extinguisher of 5 kilogram capacity, ABC type conforming to IS-13849 along with its accessories

Labour cost on Fire Alarm System

Fd Heating System (DSLS) Panel Radiator: Supply of wall mounted steel panel radiators of Heat output of 3200 kcal/hr,colour), baked in high gloss finish with and including all necessary fittings as per NE 442 standards , M.S made radiator has both core and tank made of mild steel. The radiator supplied should transfer heat from the fluid inside to the aire outside. The radiator will have thermostat control sensor to control the room temparature, Make: Eurotherm/Maktek/Bharat Works/ISI equivalent.

Boiler: Supply of vertical fire tube boilers (Heat output of 50000 Kcal/hr) (58.02 KW/hr) with stainless steel dampers. The boiler will run on HSD/Kerosene and will be rated as per the heat load calculation. The presure rating should be upto 160 pai. Now Emissions should not exceed 30 ppm. The working temperature should be upto 195 degree pehrenheit. The efficiency of Boiler should be not be less than 90% Make: Bharat Works inc of Model No: CH-70L of 50000 Kcal/hr heat output or of equivalent in Eurotherm/Rieffo/ISI equivalent.

Coolant anti freeze: Supply of anti freeze coolent Make: Servo/ISI equivalent.

Burner : Supply of Fuel Burner with the heat out put of 35 KW/hr. Fuel burner should be complete with and incl ON/OFF system fitted properly to the fuel tank, thermostat. The burner will have air/fuel control adjutment and a proper fuel pressure pump. All necessary safety features like flame failure, overflow of oil etc should be incorporated in the burner. Make: Bharat works incl/Made in India/Bentone (Made in sweden)/Cibunigas/Riello (Made in Italy) should have electronagnetic compatibility directive 2014/30/UE all connected E/M items.

Supply of expansion tank PVC 200 Ltr capacity Make Bharat works Inc/Eurotherm/Sintex /ISI equivalent.

Pump: Supply of single phase monobloc/Gland less pumps for circulating hot water throughout the system. Max flow 14 USGPM. Max Head 16 feet. Should withstand temperature range 15 degrees celisius to 115 degree celisious. The pump should be cast from madewith Stainless Steel Shaft. The Pumps will have mechanical seals capable of withstanding high temperatures of the water/anti freeze. Make wilo/Grundifoos/ISI equivelant.

Chimney: Supply of Chimney should be of MS make which will be of a dia of 4 inch. Height of chimney should be be 9ft. Pre- Painted. Properly installed on the collar of Boiler, Make Bharat works inc ISI equivalent

Supply of fuel tank of PVC having the capacity of 200 Ltr, The tank will be Pre-Painted. Make : Sintex/Vectus /ISI equivalent

Provision of PPR pipe of different diameters (20MM, 32MM) Pn16, Should be having an operating pressure from 6 to 26 Bars. The piping will be checked for any leaks under a pressure of 26 bar, Pipes used should have low thermal penetrability.

Supply of 25 mm thick glass wool Insulation superior quality for PPR pipes wherever it is exposed.

Supply of vertical fire tube boiler with and incl burner having capacity of 5 KW/hr heat output. The boiler will run on HSD/Kerosene and will be heating 250 ltr cold water in 15-20 min. Make : Bharat works inc of Model No: HW-250L or of equivalent in Eurotherm/Riello/ISI equivalent.

Supply of Service cable PVC insulated aluminium conductor, 1100V grade heavy duty servewith inner sheathing of PVC tab and overall PVC sheated in service connection 10 Sqmm 2 core (Make : Havells/Finolex/Plaza/ISI equivalent).

Distribution box 4 way SPN, 240 volts cooper bus bar and neutral link earthing stud conforming to IS-13032 & IS - 8623 double door type. (Make : Havells/Legrand/L&T/ISI equivalent)

MCB SPN 240 Volts 32 Amps ( Make : Havells/L&T/Standard/ISI equivalent)

MCB SP 6 Volts 32 Amps ( Make : Havells/L&T/Standard/ISI equivalent)

PVC tape 19mm wide 5 M long (Make : Steelgrip/Anchor/Kinjal/ISI equivalent)

Cable PVC insulated electric cables(heavy duty) 1100 volts grade multi standard copper conductor of size 1.5 Sqmm single core (FRLS) confirming to IS 1554 (Part-1) 1988 (Make : Havells/Finolex/Polycab/ISI equivalent)

Cable PVC insulated electric cables (heavy duty) 1100 volts grade multi stranded copper conductor of size 4 Sqmm single core (FRLS) confirming to IS 1554 (Part-1) 1988 (Make : Havells/Finolex/Polycab/ISI equivalent)

PVC casing capping of size 3/4 medium Grade (snow white) (Make : Anchor/SSK/CONA)

Switch Piano 5 Amp 230 Volts Flush type one way (Snow white) ( Make : Anchor/SSK/CONA/ISI equivalent)

LED tube light fittings 15W 230V box type 4 feets with CRCA body pre coated white and Prewired for LED tuble complete (Make : Havells/Bajaj/Philips/Cromption/ISI equivalent)

Screw full thread 6 x 19 mm ISI Marked, 200 Nos Pkt

PVC Switch board (snow white) size 7" x 4" for sockets and switches/DB (Make : Supreme/Polycab/Finolex/ISI equivalent)

PVC switch board (snow white) size 8" x 10" for main switches/ DB (Make : Supreme/Polycab/Finolex/ISI equivalent)

PVC "L" bend and "T" junction joint for PVC casing and capping confirming to IS 3419 (Part 3 ) (Make : Supreme/Polycab/Finolex/ISI equivalent)

Switch Socket combination(Snow White) Multipurpose 2 in 1, 15 Amp 230 Volts (Make : Anchor/SSK/CONA/ISI equivalent)

Service bracket 40mm dia GI Tubing medium grade 1.5 Mtr Long (Make : Jindal/Tata/Kalinga/ISI equivalent)

Labour cost on constr of Fd Heating System

Construction Material for Boiler Room Cement 43 Grade OPC packed in HDPE bag each 50 Kg wt conforming to IS 8112 - 1989 (Birla Gold/Ambuja / Ultratech/ISI equivalent)

Coarse sand free from vegatative materials

Coarse aggregate 20mm graded

Coarse aggregate 40mm graded

Hardcore 63 to 90mm

Mild steel framed work such as truss, rafter, purlins & MS plate (Make : TATA/ SAIL/ JSW/ISI equivalent)

Mild Steel Bars of size 6 to 8mm dia conforming to IS 432 (Part- I) 1982 (Make : TATA/ SAIL/ JSW/ISI equivalent)

Mild Steel Bars of size 10mm & above dia conforming to IS 432 (Part- I) 1982 (Make : TATA/ SAIL/ JSW/ISI equivalent)

The pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick an colour having a tensile strength 550MPa of size 10' x 3' ( for Roof & Wall ) Make Unik/ Jindal / Mectec/ISI equivalent.

The pre painted galvalume aluminium zinc coating GI based plain steel 0.50 mm thick an colour having a tensile strength 550MPa. Make Unik/ Jindal / Mectec/ISI equivalent.

Mild steel self drilling screw with washer size 3" (ISI Marked) (100 Nos/ Pkt)

Anti corrosive red oxide zinc chromate primer confirming to IS 5-2004 (Make : Berger / Asian / Nerolac/ISI equivalent)

Synthetic Paint enamelled Black confirming to IS 5- 2004 ( Make : Berger / Asian / Nerolac/ISI equivalent)

Painting Brush 3" (ISI Marked)

MS nut and bolt of length 100 mm fully thread

MS nut and bolt of length 0.45 m, 12 mm dia nuts and washers for fdn bolt.

Iron welding rod confirming to IS 814- 2002 (ISI Marked) 3.15mm thick. (100 Nos / Pkt)

MS Binding Wire

Labour cost on constr of Boiler Room

Supply and Construction of Offrs JCOs Living Shelter (Job No 2676D) Superstructure, Constr Mtrl, Internal & External Electrification & Lightning Conductor Supply & construction of Hybrid Pre-Engineered OJLs Building (Offr JCOs Living Shelter) as shown in the drawings. Offr JCOs Living Shelter will be made of Light Gauge Steel Frame Structure (LGSF) Technology with precast/Cast in situ RCC foundation of size 12.00 M X 7.40 MX 4.75 M ht) with Living Room, Seating Room, Kitchen, Dressing Room and attached toilet cum Bathroom with 4 side covered Slope roof as per Drg. The main wall and partition wall if any, will be made up of 50mm thick Rockwool insulation Panels. The roofing will be made of 0.60mm PPGI red colour coated sheets. Internal & partation Walls shall be provided with 12.5mm Gypsum Board and External wall of the Building shall be provided with 8mm thick compressed heavy duty/premium fibre cement Boards over which 8mm fibre cement siding planks will be fixed duly painted by two coats of weather shield paint. The core material is Rockwool 50mm for insulation and Vapor barrier/breather foil will be used in exterior walls for moisture control of Building all boards fixed with structural frame. Detailed specification are att as per Appx 'A. Store list of constr mtrl and elect items attached as per Annx I. Note:- 1. Foundation such as Plinth Beam, Footings, Padestal, Slab etc :- Pre- Engineered Double Storey Building include Precast RCC Foundation will be constructed by using vertical cast vibration technology (Dry Cast) or Cast in Situ All precast elements and Cast in Situ of Foundation such as Plinth Beam, Footings, Padestal, Slab etc will be machine/factory designs vetted by Structural Engineer of any of the Indian Institute of Technology (IITs/NITs) which will be submitted in the form of a signed copy of the designs & the structural engineer will be responsible for authenticity of strength & stability of the foundation of column. 2. Roof Insulations: 50mm thickness of rock wool insulation of density 48kg/m3 with aluminum foil shall be used as filler between the outer and inner skin of pre-painted galvalume/ galvanized profile sheet 3. False Ceiling: Minimum 4mm thick Fibre Cement Board Decorative Tiles shall be used for false ceiling of the rooms, varandah bathroom and Toilet Blocks in grids of size 60x60cm. 4. Glazing (Glass Wall and Glass Door) Wherever shown in the drawings glazing of clear/tinted glass 5/6mm toughened glass to be provided 5. EIectricaI Networking and Fittings: All Electrical Fittings will be provided by the bidder. 6. External Security Lights: Four LED Street lights 50W each to be fixed on external walls of the building. 7. Lightening Conductor & Earthling : As per Bldg requirement will be provided by the bidder. Notes:-Incl Design Consultancy QR incl IIT Vetting, Design Mix, Soil Testing and Consultants approved by IITs/NITs/Govt Engr Collage 8.Design and Drawings. The firm shall design the structures on the basis of soil investigation report and shall submit detailed design including all drawings duly vetted by any of the IITs. The drawings so submitted must accompany the structural stability certificate and a certificate stating that all departmental requirements are met. The detailed drawings submitted shall include entire architectural /structural drawings (one original set and three copies) including foundation/ footings/ columns layout plan, beams, roof/flooring and Parapet wall, design calculation/details and steel details of footings, columns, beams, roof, floor and structural steel of bldg. Also, drawings like electrical and plumbing layout of the building shall be included. A 3D WALK THROUGH MODEL (External: covering all the buildings and landscaping, and internal walkthrough covering layout and finishes) shall also be made as per actuals based on the approved architectural drawings under engineering scope of work. Firm shall submit the following soft copy in CDs along with final drawings: (i) Input data file, STAAD file, Design I/P file soft copy along with excel sheets. (ii) Design Folder (One set of Hard copy and one set soft copy in CD). (iii) All Drawings on Auto Cad.

Labour cost on Constr of Superstructure, Constr Mtrl, Internal & External Electrification & Lightning Conductor

Fire Alarm System Individual standalone plastic body smoke alarm with adequate provision for fixing on wall / ceiling / roof. The unit to have sensor capable of covering area >40m2 and actuating an inbuilt alarm with loudness minimum 80 DB. Smoke alarm be powered by 9 Volt lithium batteries with an arrangement to test the battery and indicator to warn for low battery, including supply two Nos of battery

Individual standalone plastic body heat alarm with adequate provision for fixing on wall / ceiling / roof. The unit to have sensor capable of detecting fixed temperature of 58oC and actuating an inbuilt alarm powered by 9 Volt lithium batteries with an arrangement to test the battery and indicator to warn for low battery, including supply two No of battery.

Fire ball extinguisher of 1.3 Kg wt with suitable provision for wall mounting and capable of self activating on contact with flames. The unit to be maintenance free, non toxic, environment friendly, and suitable for all type of fires.

Fire extinguisher of 2 kilogram capacity, dry power type conforming to IS-13849 along with its accessories

Labour cost on Fire Alarm System

Furniture Study chair of size length 56 Cm, Height 82 Cm and Width 56 Cm, Type : Lacquered finish with arm, seat and back cushion, velvet upholstery (Make :- Supreme /ISI equivalent)

Study Table of size (900x600x750mm) 18mm thick prelaminated particle board side pannel with 25.4mmx1.2mm thick round ERW tubes-31.8mmx1.2mm thick ERW tubes-31.8mmx1.2mm thick round ERW tubes and 28.6mm x1.2mm thick and welded together and hooks of 2mm thick MS sheet.

Bed Hard Steel with Mattress. Frame work of bed MS square/rectangular pipe (18 Gauge). Top of bed shall be 12mm thick BWR ply. Matress size 1.9 Mtr X 0.9 Mtr X 75 mm thick. (Make :- Sleepwell / Kurlon / Conform / ISI equivalent).

Locker/Almerah Steel of size 1200mm X 900mm x 450mm made with 1mm thick steel sheet. Half of locker shall have hanging space. Hanging portion shall have 20mm dia fhromium plated steel conduit pipe 1.6m.

Single seater sofa inner size 21" x 22" , 12mm plywood should be used for seat base, Back seats-Form with a thickness of 4" and seating seats - form with a thickness of 5". (Make : Seventh Heaven / Westido/ Bharat Lifestyle/ISI equivalent)

Wooden Centre Table size 112 x 58 x 45 cm, brass design on the Top, covered with transparent glass and netural finish. (Make :- Supreme /ISI equivalent)

Dressing mirror Gents made of timber. All timber work shall be of well seasoned first class hard wood free from sap wood, nots cracks etc. Mirror shall be 5mm thick silver sheet glass fixed with teak wood beading and brass screws. All wooden surface shall be high gloss french polish and hidden surfaces shall be treated with two coats of linseed oil.

Water dispenser of 230 V 500 watts without refrigerator with normal cold and heating capacity of 5 ltrs/ hour with storage compartment and auto shut off facility (Make: VOLTAS/ LG/ USHA/ISI equivalent)

Fd Heating Syster (OJL Shelter) Panel Radiator: Supply of wall mounted steel panel radiators of Heat output of 3200 kcal/hr,colour), baked in high gloss finish with and including all necessary fittings as per NE 442 standards , M.S made radiator has both core and tank made of mild steel. The radiator supplied should transfer heat from the fluid inside to the aire outside. The radiator will have thermostat control sensor to control the room temparature, Make: Eurotherm/Maktek/Bharat Works/ISI equivalent.

Boiler: Supply of vertical fire tube boilers (Heat output of 50000 Kcal/hr) (58.02 KW/hr) with stainless steel dampers. The boiler will run on HSD/Kerosene and will be rated as per the heat load calculation. The presure rating should be upto 160 pai. Now Emissions should not exceed 30 ppm. The working temperature should be upto 195 degree pehrenheit. The efficiency of Boiler should be not be less than 90% Make: Bharat Works inc of Model No: CH-70L of 50000 Kcal/hr heat output or of equivalent in Eurotherm/Rieffo/ISI equivalent.

Coolant anti freeze: Supply of anti freeze coolent Make: Servo/ISI equivalent.

Burner : Supply of Fuel Burner with the heat out put of 35 KW/hr. Fuel burner should be complete with and incl ON/OFF system fitted properly to the fuel tank, thermostat. The burner will have air/fuel control adjutment and a proper fuel pressure pump. All necessary safety features like flame failure, overflow of oil etc should be incorporated in the burner. Make: Bharat works incl/Made in India/Bentone (Made in sweden)/Cibunigas/Riello (Made in Italy) should have electronagnetic compatibility directive 2014/30/UE all connected E/M items.

Supply of expansion tank PVC 200 Ltr capacity Make Bharat works Inc/Eurotherm/Sintex /ISI equivalent.

Pump: Supply of single phase monobloc/Gland less pumps for circulating hot water throughout the system. Max flow 14 USGPM. Max Head 16 feet. Should withstand temperature range 15 degrees celisius to 115 degree celisious. The pump should be cast from madewith Stainless Steel Shaft. The Pumps will have mechanical seals capable of withstanding high temperatures of the water/anti freeze. Make wilo/Grundifoos/ISI equivelant.

Chimney: Supply of Chimney should be of MS make which will be of a dia of 4 inch. Height of chimney should be be 9ft. Pre- Painted. Properly installed on the collar of Boiler, Make Bharat works inc ISI equivalent

Supply of fuel tank of PVC having the capacity of 200 Ltr, The tank will be Pre-Painted. Make : Sintex/Vectus /ISI equivalent

Provision of PPR pipe of different diameters (20MM, 32MM) Pn16, Should be having an operating pressure from 6 to 26 Bars. The piping will be checked for any leaks under a pressure of 26 bar, Pipes used should have low thermal penetrability.

Supply of 25 mm thick glass wool Insulation superior quality for PPR pipes wherever it is exposed.

Supply of vertical fire tube boiler with and incl burner having capacity of 5 KW/hr heat output. The boiler will run on HSD/Kerosene and will be heating 250 ltr cold water in 15-20 min. Make : Bharat works inc of Model No: HW-250L or of equivalent in Eurotherm/Riello/ISI equivalent.

Supply of Service cable PVC insulated aluminium conductor, 1100V grade heavy duty servewith inner sheathing of PVC tab and overall PVC sheated in service connection 10 Sqmm 2 core (Make : Havells/Finolex/Plaza/ISI equivalent).

Distribution box 4 way SPN, 240 volts cooper bus bar and neutral link earthing stud conforming to IS-13032 & IS - 8623 double door type. (Make : Havells/Legrand/L&T/ISI equivalent)

MCB SPN 240 Volts 32 Amps ( Make : Havells/L&T/Standard/ISI equivalent)

MCB SP 6 Volts 32 Amps ( Make : Havells/L&T/Standard/ISI equivalent)

PVC tape 19mm wide 5 M long (Make : Steelgrip/Anchor/Kinjal/ISI equivalent)

Cable PVC insulated electric cables(heavy duty) 1100 volts grade multi standard copper conductor of size 1.5 Sqmm single core (FRLS) confirming to IS 1554 (Part-1) 1988 (Make : Havells/Finolex/Polycab/ISI equivalent)

Cable PVC insulated electric cables (heavy duty) 1100 volts grade multi stranded copper conductor of size 4 Sqmm single core (FRLS) confirming to IS 1554 (Part-1) 1988 (Make : Havells/Finolex/Polycab/ISI equivalent)

PVC casing capping of size 3/4 medium Grade (snow white) (Make : Anchor/SSK/CONA)

Switch Piano 5 Amp 230 Volts Flush type one way (Snow white) ( Make : Anchor/SSK/CONA/ISI equivalent)

LED tube light fittings 15W 230V box type 4 feets with CRCA body pre coated white and Prewired for LED tuble complete (Make : Havells/Bajaj/Philips/Cromption/ISI equivalent)

Screw full thread 6 x 19 mm ISI Marked, 200 Nos Pkt

PVC Switch board (snow white) size 7" x 4" for sockets and switches/DB (Make : Supreme/Polycab/Finolex/ISI equivalent)

PVC switch board (snow white) size 8" x 10" for main switches/ DB (Make : Supreme/Polycab/Finolex/ISI equivalent)

PVC "L" bend and "T" junction joint for PVC casing and capping confirming to IS 3419 (Part 3 ) (Make : Supreme/Polycab/Finolex/ISI equivalent)

Switch Socket combination(Snow White) Multipurpose 2 in 1, 15 Amp 230 Volts (Make : Anchor/SSK/CONA/ISI equivalent)

Service bracket 40mm dia GI Tubing medium grade 1.5 Mtr Long (Make : Jindal/Tata/Kalinga/ISI equivalent)

Labour cost on constr of Fd Heating System

Construction Material for Boiler Room Cement 43 Grade OPC packed in HDPE bag each 50 Kg wt conforming to IS 8112 - 1989 (Birla Gold/Ambuja / Ultratech/ISI equivalent)

Coarse sand free from vegatative materials

Coarse aggregate 20mm graded

Coarse aggregate 40mm graded

Hardcore 63 to 90mm

Mild steel framed work such as truss, rafter, purlins & MS plate (Make : TATA/ SAIL/ JSW/ISI equivalent)

Mild Steel Bars of size 6 to 8mm dia conforming to IS 432 (Part- I) 1982 (Make : TATA/ SAIL/ JSW/ISI equivalent)

Mild Steel Bars of size 10mm & above dia conforming to IS 432 (Part- I) 1982 (Make : TATA/ SAIL/ JSW/ISI equivalent)

The pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick an colour having a tensile strength 550MPa of size 10' x 3' ( for Roof & Wall ) Make Unik/ Jindal / Mectec/ISI equivalent.

The pre painted galvalume aluminium zinc coating GI based plain steel 0.50 mm thick an colour having a tensile strength 550MPa. Make Unik/ Jindal / Mectec/ISI equivalent.

Mild steel self drilling screw with washer size 3" (ISI Marked) (100 Nos/ Pkt)

Anti corrosive red oxide zinc chromate primer confirming to IS 5-2004 (Make : Berger / Asian / Nerolac/ISI equivalent)

Synthetic Paint enamelled Black confirming to IS 5- 2004 ( Make : Berger / Asian / Nerolac/ISI equivalent)

Painting Brush 3" (ISI Marked)

MS nut and bolt of length 100 mm fully thread

MS nut and bolt of length 0.45 m, 12 mm dia nuts and washers for fdn bolt.

Iron welding rod confirming to IS 814- 2002 (ISI Marked) 3.15mm thick. (100 Nos / Pkt)

MS Binding Wire

Labour cost on constr of Boiler Room

Suntech Systems Pvt.Ltd. (BID ID -3286081)

Empresa Inc (BID ID -3286795)

M/s Buildcon (BID ID -3286815)