Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹64.0 Laccepted-aoc | ₹64.0 L | accepted-aoc |
Tender Value
Refer Docs
EMD Value
₹1.3 L
Closing Date
23 Feb 2026, 9:30 pmClosed
Bengaluru Water Supply And Sewerage Board
Suhas H P
Tender the work of Supply, Erection and Commissioning of 600mmdia Double Flanged End silent /slanted Check valve of PN 25 rating to Delivery Side of Pump set in CWSS III Stage pump house at Tataguni. (Short Term Tender)
BWSSB/2025-26/PM/WORK_INDENT3286
BWSSB/2025-26/PM/WORK_INDENT3286
Open
Plants and Machinery
Two Tender Document System(Two Cover)
BWSSB Executive Engineer Kaveri Operation and Maintenance Two
4 documents required · 1 mandatory · 3 optional
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
Tenderer should have executed in any one year the following minimum quantity of work usually 80% of the annual requirement (In a Continues period of 12 Months) supply, erection and commissioning of PN 25 Rating 600mm dia Sluice/NRV/Butterfly valve-03 Nos
The Tenderer Should Have Satisfactorily completed at least one similar work such as work of supply, erection and commissioning of Sluice/Butterfly/Check valve to an extent of 50% of the cost of work. i.e., Rs. 37,14,150/-
GST
Liquid assets or availability of credit facilities usually 30% of the amount of contract i.e., Rs.22,29,000/-
Assessed available tender capacity (AxNx2.5 - B) More Than Rs. 74,28,300/-
Achieved in at least Two financial years an average annual financial turnover (classes of similar type of works/Mechanical/Electromechanical works) should not be less than amount put to tender of Rs. 74,28,300/- (Rupees Seventy-Four Lakhs Twenty-Eight Thousand Three Hundred Only).
Licence
Achieved in at least Two financial years an average annual financial turnover (classes of similar type of works/Mechanical/Electromechanical works) should not be less than amount put to tender of Rs. 74,28,300/- (Rupees Seventy-Four Lakhs Twenty-Eight Thousand Three Hundred Only).
₹1,580
₹1.3 L
23 Feb 2026
16 Feb 2026
24 Feb 2026
20 Feb 2026
Tender the work of Supply, Erection and Commissioning of 600mmdia Double Flanged End silent /slanted Check valve of PN 25 rating to Delivery Side of Pump set in CWSS III Stage pump house at Tataguni. (Short Term Tender)
Removing of bolts and nuts of existing 600mmdia reflux valve on either side and dismantling joint. Cutting of 600mmdia dismantling joint pipe, lifting and shifting of reflux valve from the pipe duct, ...
Supply and Erection of 600mmdiax12mm thick 750mm long M.S spool piece to Check valve. The spool piece shall be welded to barrel pipe piece. The spool piece of check valve shall be painted with two coa...
Supply of 600mmdia double flanged Silent /Slanted check valve (Non Return Valve) as per IS 5312/EN standards of PN25 rating.
Material of Construction: Supply of 600mmdia Double flanged silent/slanted ...
Fabrication, Supply and fixing of S.S Bypass line of 80mmdia. After making hole on existing delivery pipe providing of 2nos of M.S stub with 2Nos of Control valve of PN 25 rating and 80mmdia stainless...
Erection and commissioning of new 600mmdia check valve with supply and fixing of 5mmthick fireply gasket. Supply and fixing of M.S stud bolts and nuts M32x220mm long with 2nuts.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
DTP 600mm Check Valve 3rd stage Tataguni.docx
Tender Document • 0.36 MB
Schedule Check Valve 600mm at Tataguni 3rd Stage Pumping Station.xlsx
Others - Price schedule • 0.01 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .