WORK OF CARRIAGE , SHIFTING , INSATLLATION OF A.C. POWER SUPPLY CUBICALES , LAYING AND TERMINATION OF POWER CABLES AND PROVIDING AND FIXING OF LIGHT JUCTION BOX AND OTHER ASSOCIATES WORK AT 132 KV S/s F.C.I. UNDER ETD-I , GORAKHPUR

Amount

Shifting , Loading , Carriage & Unloading of 04 Nos. AC Power cubicles of size 2250x400mm from central store of ETD-I , Gorakhpur to 132 KV side switchyard & 33KV side switchyard of 132 KV S/s F.C.I. , Gorakhpur by with all cost of men , materials , T&P etc. required for work .

Grouting & Installation of AC Power Cubical having double source arrangement at different locations in the switchyard of 132KV S/s FCI Gorakhpur by cement , sand , concrete mixture in suitable ratio , its curing by seven days . The work also covers earthing of each & every AC Power cubicals after digging of earth , cutting , welding , bending by 25/50x6mm M.S. Flat and painting of earthing strips by bus green colour in two coats after applying primer in one coats with all cost of men , T&P , Materials , etc.

Excavation of trench of size 300x300mm for laying of 2/4Cx2.5mm2 Control Cable and Refilling Earth , after laying of Control Cable over sand bed along with covering it with reverse 'U' Shaped bricks from 3 side for its protection .

Laying of 3 1/2 Cx95/50 Sq. mm. Alluminum Power Cable between 415V 3-phases ACDB to AC cubicle & its interconnection in the 132KV Side & 33KV side by Excavation of earth below 500 mm ground level for making of trench . Putting 1st Class Bricks between and along with cable on both side , filling the same with sand and then putting the bricks over the trench and then filling with earth (including cost of bricks and sand) with all cost of man , misc. consumables and T&P required for the job .

Termination of 3 1/2 Cx95/50 Sq. mm. Alluminum Power cables between 415V 3-phases ACDB to AC cubicle & its interconnection in the 132KV Side & 33KV side after proper glanding & providing suitable size Alluminum lugs with due crimping along with all cost of men , material , T&P etc. required for the work .

Providing & Fixing of hot dip galvanized light junction size 250x200x125mm with 12 Nos. connectors having 04 holes of 19mm cable gland size at bottom side made 18 SWG iron sheet having suitable sizes cover with lock & hinges . The JB should be provided with 02 Nos. Connecting strips of size 25x6mm of suitable length at a gap of 140mm mounted with 10Amp. connectors on one strip for electrical connection & 03 Nos. 15Amp. kit kat fuses on second strip with 01 neutral link. Back side of JB should be provided with 04 Nos. 100mm long 25x6mm strips at all four corners with one hole of 16mm dia. For mounting of JB with structure 16mm dia. 04Nos. bolts , nuts & washer should be provided with each box . All joints & seals should be leakage proof including cost of labour , T&P and material required for the proper completion of the work .

Sri Balaji Associates

Harshit Enterprises

Vasu Associates