SPECIAL REPAIR TO JCOS ORS MD ACCN BLDG NO 25 BY 2 25 BY 4 26 BY 1 26BY 4 27 BY 2 27 BY 4 36 BY 2 36 BY3 37 BY 4 AND 39 BY 4 AT MU CAMP OF ESD KANKINARA UNDER GE NORTH KOLKATA

Amount

Taking down cement plaster on brick or stone wals, etc. including raking out joints, hacking for keys, scrubbing down with water, etc. complete all as specified and as directed .

Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces of wall by Vacuum based sanding machine , applying wall care putty 1 mm thick (Multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two coat of emulsion distemper white or coloured by Auto Roller complete all as specified and as directed.

Material and labour for complete removal of existing treatment from old decorated plastered surfaces of wall by Vacuum based sanding machine, removal of nail etc & filling cracks/hole with putty,applying wall care putty upto 1mm thick as required (Multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two coats of emulsion distemper white or coloured by Auto Roller complete all as specified and as directed.

Materials and labour for rendering 20 mm thick cement plaster in cement mortar (1:4) in two layers, each 10mm thick, top layer mixed with integral water proofing liquid admixture as per manufacturers instruction on brick or concrete surfaces of wall, finished the surface fair and even complete all as specified and as directed. Note: (WPC shall be measured and paid separately).

Material and labour for preparation of newly plastered surfaces of wall by Vacuum based sanding machine, removal of nail etc & filling cracks/hole with putty, and applying two coats of Anti Fungal paint white or coloured by Auto Roller, including necessary scaffoldings complete all as specified and as directed as per manufacturers instruction.

Material and labour for complete removal of existing treatment from old decorated plastered surfaces of wall by Vacuum based sanding machine, removal of nail etc & filling cracks/hole with putty, and applying two coats of Anti Fungal paint white or coloured by Auto Roller, including necessary scaffoldings complete all as specified and as directed as per manufacturers instruction.

Supply only integral water proofing liquid admixture for concrete and mortar complete all as specified and directed.(Make :CONPLAST X421IC of Fosroc /SIKA No 1 of SIKA/equivalent brand of PIDILITE)

Material and labour for preparation of old treated plastered surfaces of wall and applying one coat of colour wash complete all as specified and as directed.

Supply and fix anodised aluminium frame for doors,windows,ventilators(including 2/3 track) with one or more rebated including jointing cleat for fixing etc.complete all as specified and as directed.

Supply and fix sliding aluminium anodized glazed shutter for sliding window/ ventilator with aluminium channel section weighning not less than 0.55 Kg per sqm including aluminium cleat,roller rubber neoprene packing/gasket etc complete all as specified and as directed.(Note: Glass shall be measured and paid separately)

Supply and fix sliding aluminium anodized wiremesh shutter for sliding window/ventilator with aluminium channel section weighning not less than 0.55 Kg per sqm including aluminium cleat,roller rubber neoprene packing/gasket etc complete all as specified and as directed.

Supply and fix Stainless steel wire cloth of 0.36 mm nominal dia of wire and average width of aperature 1.40 mm fixed with stainless steel wire staples complete all as specified and directed.

Supply and fix 4.0 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.50 sqm in each pane, complete all as specified and as directed.

Supply and fix in repair Stainless steel wire cloth of 0.36 mm nominal dia of wire and average width of aperature 1.40 mm fixed with stainless steel wire staples complete all as specified and directed.

Supply and fix in repairs 4.0 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.50 sqm in each pane, complete all as specified and as directed.

Taking down chowkats or frames with single or double shutter (without taking off shutter from the frame) n. exc 1.50 Sqm in each complete all as specified and directed.

Taking down chowkats or frames with single or double shutter (without taking off shutter from the frame) exc 1.50 and not exc. 4.00 Sqm in each complete all as specified and directed.

Taking down shutters only of any description exc 1.0 sqm and n exc 2.0 Sqm each opening complete all as specified & directed.

Supply and fix 35mm thick 2nd class hard wood factory made plain framed panelled door shutters, (single panel) without lock rail and panel of 12mm veneered particle board with commercial veneered on both faces and rail and stiles as per IS 1003(Pt-I), kiln seasoned and chemically pressure treated etc. complete all as specified and as directed.

Supply and fix 35 mm thick, glazed/skeleton shutters with second class hard wood,open rebated and prepared to receive glass, gauze, etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass, etc complete as specified and directed . Sizes of members of shutters as specified in SSR Part I, Section -8, clause 8.24 (a) complete all as specified and directed.

Material and labour for 2nd class hardwood in plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed .

Supply and fix MS holdfast made up of FI, 25 x 3mm conforming to Fe-410-0 or Fe-310-0 complete all as specified and directed.

Material and Labour for PCC (1:3:6) type C-1 using 20 mm graded stone aggregates as in block for fixing of hold fast and similar items complete all as specified and as directed.

Supply & fix 100 mm long MS Butt hinge , medium weight , cold rolled complete all as specified and as directed .

Supply and fix 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Supply and fix 150mm size extruded aluminum alloy handle fabricated type anodized complete all as specified and as directed.

Supply and fix 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

Material and Labour for applying two coats of Synthetic enamel paint over a coat of pink primer on new wooden surface exc 10 cm width or girth includig preparation of the surface complete all as specified and as directed .

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed.

Material and labour for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exc 0.18 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed or bedding layer in CM(1:6) complete all as specified and directed.

Material and labour for glazed ceramic coloured tiles (300x200) x7mm thick in skirting/ dados etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tiles over and including 10mm thick rendering in CM(1:4) complete all as specified and directed.

Supply and fix in repairs vitreous china wash hand basin white flat back, size 630 x 400 mm including PTMT waste coupling 32mm dia (min wt 45 gm), chain, plug and porcelain stopper etc. complete all as specified and as directed.

Supply and fix in repairs stainless steel sink with drainage board made out of 1 mm thick sheet for kitchen with plug washers, waste pipe including bedding in cement mortar on dwarf wall or including cast iron cantiliver brackets connecting union overall size 915 X 460 mm with bowl size 405x355x178mm or 410x357x178mm complete all as specified and as directed.

Supply and fix in repairs stainless steel sink without drainage board made out of 1 mm thick sheet for kitchen with plug washers, waste pipe including bedding in cement mortar on dwarf wall or including cast iron cantiliver brackets connecting union overall size 495 X 420 mm with bowl size 410x330x160mm or 410x357x178mm complete all as specified and as directed.

Supply and fix in repair stainless steel kitchen Plate Rack of size 24''x36''x10'' complete all as specified and as directed.

Supply and fix in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests and 'P'or 'S' trap (excluding flushing cistern and flush pipe) including provision of lime concrete bedding complete all as specified and as directed.

Supply and fix in repair vitreous china wash down water closet pan, semi pedestal pattern (Anglo Indian Type), white including plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device suitable for Anglo Indian Type pedestal pan excluding flushing cistern and flush pipe) complete all as specified and as directed.

Material and labour for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.18 sqm but not exc 0.38 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed or bedding layer in CM(1:6) complete all as specified and directed.

Material and labour for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) polished, each tiles exceeding 0.18 sqm but not exc 0.38 sqm as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tiles over and including 10mm thick rendering in CM(1:4) complete all as specified and as directed.

Supply and fix in repair brass chromium plated tubular towel rail , 20mm dia, D type, 600mm long between flange fixed with chromium plated brass screws complete all as specified & directed.

Supply and fix in repairs 100mm cast iron Nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed.

Supply and fix in repair fancy type drapery curtain rod bracket as specified and as directed.

Supply and fix in repair brass chromium plated curtain rods of 20mm dia complete all as specified and directed.

Supply and fix in repair soap dish, vitreous china white approximate size 160x160x90mm and fixed in position complete all as specified & directed.

Supply and fix in repairs brackets for WHB and Sink made out of 20mm bore GI pipe, medium grade, 600mm long and embeded into the wall with PCC (1:3:6) type C1 complete all as specified and as directed.

Dismantling wall and ceiling board ( fibre, pulp, insulation etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets etc. complete all as specified and directed.

Supply and fix Anodised aluminium snap grid frame work size of grid 605mmx605mm for false ceiling including GI hangers 2mm dia GI wire (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and as per manufacturers instruction complete all as specified and directed.

Supply and fix of 6mm thick high pressure steam cured non asbestos fibre cement designer ceiling board of size to suit grid mould (605 x 605mm as specified above) and fix in grid mould with necessary fixing arrangement as per manufacturer’s instruction complete all as specified and directed.

Material and labour for plywood 6mm thick, grade BWP, type BB fixed with screws to timber frame work complete all as specified and as directed.

Material and labour for 2nd class hard wood , wrought, plain fillets, rectangular, square or triangular in section exceeding 3 sq.cm but n.exc. 6 sq.cm. secured with screws including taking out old damaged fillets complete all as specified and as directed.

All as per item No. 52 above but exceeding 6 sq.cm but n.exc. 13 sq.cm. complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified & directed.

Supply and fix Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, fixing in opening as per specification & drawing complete all as specified & directed.

Supply and fix in repair 15mm bore stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 90gms) complete all as specified and as directed.

Supply and fix in repair 15mm bore bib tap (Minimum weight 90gms) standard of PTMT any colour high pressure screwed for iron pipe complete all as specified and as directed.

Supply and fix in repair 15mm bore Pillar tap (Minimum weight 110gms) standard of PTMT any colour high pressure screwed for iron pipe complete all as specified and as directed.

Supply and fix in repair shower rose with shower arm of PTMT (Minimum weight 40gms) any colour for fixing with 15mm bore pipe complete all as specified and as directed.

Supply and fix in repair grating doom 100mm dia of PTMT (Minimum weight 25 gms) in repairs complete all as specified and as directed.

Supply and fix in repairs 15mm bore bib tap, fancy type, chromium plated cast copper alloy with crutch or butterfly handle complete all as specified and as directed.

Supply and fix in repair stop cock, 15mm bore, fancy type, chromium plated with long shank and cup concealed type cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrule complete all as specified and as directed.

Supply and fix in repair 10 litre capacity PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern including PVC connections 15mm size with brass nuts and washer both side of length 450mm complete all as specified and as directed.

Supply and fix PVC(SWR) pipe 110 mm dia single socketed in any length with rubber ring joint, laid in trenches or in floor complete all as specified and as directed.

Supply and fix 110 mm bore PVC (SWR) bend , any radius complete all as specified and as directed.

S&F 15 mm bore Steel water tubing, 'medium grade', galvanised , with all fittings ; and fixed complete to walls and ceilings or laid in floors including taking down old unserviceable pipe complete all as specified and as directed.

S&F 20 mm dia Steel water tubing, 'medium grade' ,galvanised , with all fittings ; and fixed complete to walls and ceilings or laid in floors including taking down old unserviceable pipe complete all as specified and as directed.

Material and labour for brick work with bricks class designation 75, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.

Supply and fix 500 litres capacity rotational moulded polythene water storage tanks (Multi-layered) (cylindrical vertical, with closed top), hoisted and fixed in position as specified in SSR Part I including dismantling of unserviceable water tanks and removing from site complete all as specified and directed.

Materials and labour for 75mm thick PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) as in pavement/plinth protection , laid in bays and joints shall be filled up with bituminous gola with 80/25 bitumen (1 part of bitumen to be mixed with 3 part of sand) and finished the surface fair and even complete all as specified & directed.

Demolition of reinforced concrete as in roofs, floors (other than ground floors), beams, staircases, landing, and similar suspended work (reinforcement cut as required to facilitate demolition) with necessary scaffolding and protection as required complete all as specified and as directed.

Material and Labour for preparation of old steel surface and applying one coat of synthetic enamel paint exc 10 cm width or girth complete all as specified and as directed.

Material and labour for machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, rounding edge and polishing complete all as specified and directed.

Taking down copper / aluminium point wiring any type complete, including fixture and fittings any type removing materials for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.surfaces, complete all as specified and directed.

Taking down ceiling fan/exhaust fan from existing position and kept in store under safe custody for refixing the same on its existing postion complete all as specified and directed.

Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed.

Fixing only ceiling/exhaust fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed.

Material and labour for concealed point wiring with FRLSH PVC insulated 1100 volts grade unsheathed single core multi-stranded copper conductors 1.5 sqmm for phase,1.5 sqmm for neutral and 1.5 sqmm for earth continuty conductor drawn through and including PVC conduit medium grade with accessories of suitable size but not less than 20 mm and including suitable size of pressed steel sunken terminal box duly painted MS sheet and covered with suitable size thick insulated hylam sheet cover for fixing of switches, sockets etc. for one light point controlled by one switch complete all as specified as directed. Note :(i) Cost of cutting of wall, if any, for housing of GI box, ceiling rose,and PVC conduit for wiring etc and also making good the disturbed surfaces are deemed to be included in unit rate.

All as per Item No. 78 above but for one ceiling fan/ exhaust fan point controlled by one switch and one regulator complete all as specified as directed.

All as per Item No. 78 above but for one 3/5pin 6 Amp Socket outlet on the independent board complete all as specified as directed.

All as per Item No. 78 above but for one 3/5pin 6 Amp Socket outlet on the same board complete all as specified as directed.

All as per Item No. 78 above but for one call bell point controlled by one switch complete all as specified as directed.

All as per item no 78 above but for FRLSH PVC insulated 1100 volts grade unsheathed single core multistranded copper conductors 2.5 sqmm for fixing of 16 A switches, sockets, etc complete all as specified as directed.

Supply and fix switch piano flush button 5 Amp single pole one way 240 volt complete all as specified as directed.

Supply and fix socket out let 3/5 pin 5 Amp 240 volt complete all as specified as directed.

Supply and fix switch socket combination 3/5 pin 5 Amp 240 volt complete all as specified as directed.

Supply and fix switch socket combination 3/6 pin 15 Amp flush type 240 volt complete all as specified as directed.

Supply and fix celling fan regulator (step regulator) switch type AC 230 volt suitable for ceilling fan any sweep complete all as specified as directed.

Supply and fix bell push 6 amps complete all as specified as directed.

S&F call bell ding dong type AC 230 volt single pole complete all as specified as directed.

S&F lamp holder PVC/Polycarbonate type with backplate suitable for batten fittings complete all as specified as directed.

Supply and fix celling rose surface, 3 terminal ISI marked complete all as specified and directed.

Supply and fix box type luminiare, pre coated in white and pre-wired for single LED tube light 4 ft capacity suitable for single T8 LED tube rod 4ft 20 watt complete with LED tube rod T8, 20 W, 4ft long with extruded aluminium body, PC diffuser and inbuilt driver, holder, prewired fitted and connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose to connector of tube light fitting including taking down old unserviceable fitting any type complete all as specified and as directed. Make: Century LED Ltd cat part no TWPP020C For rod and KCCF200 for Fitting battten/Surya Cat No SLETLDS18PALEXT for rod & SUB118T8LED for batten/ Wipro Cat No LL13-181-SESL for rod & W10921208 for batten or equivalent Model of Makes specified in PS here-in-after.

Supply and fixing LED batten mirror light 10 Watt extruded aluminium body, PC diffuser and inbuilt driver, prewired with electronic driver and diffuser and all accessories fitted on wall / ceiling including connecting up with three core twisted flexible copper conductor cable of suitable size including taking down the old light fitting any type complete all as specified and as directed. (Make : Century/Surya/Philips/Wipro/Havells)

Supply and fix LED bulk head light fitting 12 Watt IP 65 protection with inbuilt driver prewired to be fixed on wall/ ceiling complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable of suitable size including taking out old unserviceable fitting any type complete all as specified and directed. (Make : Century/Surya/Philips/Wipro/Havells)

Supply and fix LED STREET light/Building security light 45 Watt die cast aluminium housing with IP-65 protection and surface mounting device LED 45 Watt with lens with inbuilt driver prewired and SPD 5 KV building security luminaire including all fixing arrangement required to fixed on pole/ wall with suitable size of GI bracket including suitable size of fixing items such as clamps, nut bolts and washer of suitable size with connection complete including taking down old light fitting any type complete all as specified and directed. Make - Century LED Ltd Cat part No. - SPSP045C / Wipro Cat no LR13611xxx57xx / Philips/Surya cat no SLE UL 45WLXN or equivalent Model of Makes specified in PS here-in-after.

Material and labour for sub-main wiring with two run of FRLSH PVC insulated unshethed single core multi-stranded copper conductor of size 1.5 sqmm and one run of 1.5 sqmm copper conductor as continuity earth wire drawn in and including PVC casing caping / PVC conduit medium duty of suitable size but not less than 20 mm dia on wall / floor etc, including PVC fittings such as bends Tee and boxes including taking down old unserviceable sub main wiring all as specified and directed (Note : (i) Three run of 1.5 sqmm wire one run of PVC conduit shall be measured and paid as one unit. (ii) Cost of wall cutting if any for laying of wire and also making good surfaces are deemed to be included in unit rate).

Material and labour for sub-main wiring with two run of FRLSH PVC insulated unshethed single core multi-stranded copper conductor of size 4 sqmm and one run of 4 sqmm copper conductor as continuity earth wire drawn in and including PVC casing caping / PVC conduit medium duty of suitable size but not less than 20 mm dia on wall / floor etc, including PVC fittings such as bends Tee and boxes including taking down old unserviceable sub main wiring all as specified and directed (Note : (i) Three run of 4.0 sqmm wire one run of PVC conduit shall be measured and paid as one unit. (ii) Cost of wall cutting if any for laying of wire and also making good surfaces are deemed to be included in unit rate).

Supply and fixing TPN DB 4 way double door horizontal type 415 volts suitable for four pole MCB TPN as incomer including make good of damaged surface/wall including re-connection with existing earth wire to DB incuding taking out the old unserviceable one complete all as specified and as directed. (Make : C&S/Indoasian/Havells/L&T/Legrand/ABB)

Supply and fix powder coated sheet steel enclosure fitted with busbar, DIN channel, neutral link & earth link superline SPN DB (Double door) 8 way 240 volts, including taking down the old unserviceable DB complete all as specified as directed. (Make : C&S/Indoasian/Havells/L&T/Legrand/ABB)

Supply and fix powder coated sheet steel enclosure fitted with busbar, DIN channel, neutral link & earth link superline SPN DB (Double door) 4 way 240 volts, including taking down the old unserviceable DB complete all as specified as directed. (Make : C&S/Indoasian/Havells/L&T/Legrand/ABB)

Supply and fix MCB FP 63 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of lugs complete all as specified as directed. (Make : C&S/Indoasian/Havells/L&T/Legrand/ABB)

Supply and fix MCB single pole & neutral 40 Amps, 240 volts, 'C' series with all incoming / outgoing connections with proper size of lugs complete all as specified as directed. (Make : C&S/Indoasian/Havells/L&T/Legrand/ABB)

Supply and fix MCB single pole 6 to 32 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of aluminium lugs complete all as specified as directed. (Make : C&S/Indoasian/Havells/L&T/Legrand/ABB)

Supplying, laying, commissioning and testing XLPE insulated PVC sheathed armoured heavy duty electric cable of size 16 Sqmm 4 core with aluminium conductor for working voltage upto and including 1100 volts, ISI marked to be laid on wall, fixed to pole, wall/roof complete with cable end, lugs including required size of aluminium thimble for making connection including taking down old unserviceable cable of any type and size completed all as specified and directed.

Materials and labour for earthing complete with galvanized earth plate electrode 600 x 600 x 6.0 mm thick, buried directly in ground (earth pit not less than 2.25 m deep below normal ground level ) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized iron earth lead wire 4.0 mm dia length upto 7.5 mtr by means of bolts, nuts, check nuts and washers of galvanized iron or steel, earth lead wire protected by and including 15mm dia GI pipe (light grade) not exc 7.5 mtr, alternate layers of charcoal and salt, including 20 mm bore GI tubing for watering to earth electrode, earth lead connected to test point/ distribution panel /feeder pillar etc as directed including necessary earth work, concrete pit with PCC (1:3:6) type C1, pre cast RCC(1:1:5:3) type A1 cover slab duly reinforced with 8 mm dia TMT bar 150mm c/c both way and two numbers lifting handle made of TMT bar and set in cement mortar (1:4), funnel, wire mesh, all as shown in electrical plate No 3 of SSR part-1 and testing on completion, complete all as specified and directed.

S.S. CO (BID ID -3153544)

SANDIP CONSTRUCTION (BID ID -3156625)

CHOWDHURY SMALL INDUSTRIES (BID ID -3155144)

A.ESS & CO. (BID ID -3153314)

BHARUKA ENTERPRISES (BID ID -3152802)

ELECTRO COMMERCIAL CO (BID ID -3153666)

RADHA ENTERPRISE (BID ID -3153681)