Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Ref. No.
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹1.8 Cr
EMD Value
₹3.6 L
Closing Date
21 Aug 2023, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Supply and Installation of solar stud in ndmc area
5160898
GEM/2023/B/3810671
Two Packet Bid
title 1,title 2,title 3,title 4,title 5
60 days
Delhi; New Delhi
Total value wise evaluation
BOQ
7 documents required · 7 mandatory
3 yrs
₹3
50%
₹3.6 L
21 Aug 2023
10 Aug 2023
21 Aug 2023
| Item No | Item Title | Description | Qty | Unit | Consignee | Delivery (days) |
|---|---|---|---|---|---|---|
| 1 | title 1 | 1 Supplying and installation of Solar Raised Pavement markers made out of polycarbonate molded body with circular shape solar powered LED self illumination in active modE 360 degree illumination and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face in passive mode The marker shall support a load of 20000 kg tested in accordance to ASTM D 4280 The marker should be resistant to dust and water ingress according to IP 65 standards and should withstand temperatures in the range of 0 C to 70 C Typical frequency of blinking is 1 Hz There should be current losses of less than 20 microamperes at 2.4V in sleepcharing mode to enhance the life of the marker and a full charge should provide for a minimum autonomy of 50 hours The height, width and length shall not be less than 10 mm X 100 mm X 100 mm Also the surface diameter of the marker shall not be less than 100 mm respectively. The weight of the marker shall not exceed 0.5 kilogram Fixing will be done by drilling holes on the road for the shanks to go inside without nails and using epoxy resin based adhesive and complete as directed by the engineer in charge The solar raised pavement markers shall be tested for Compression strength of 20000 Kg IP 65 rating Blinking frequency from government lab CRRI ARAI ICAT CPRI as per requirement of MoRTH and Test Report shall be submitted with Supply of material | 7,334 | Each | Mohar Singh Meena 110001,O/O Chief Engineer &#x 28;Civil-II&#x 29;,15 th Floor, Palika Kendra, New Delhi-110001 | 60 |
| 2 | title 2 | 2 Supplying and installation of Solar Raised Pavement markers made out of polycarbonate molded body with circular shape solar powered LED self illumination in active modE 360 degree illumination and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face in passive mode The marker shall support a load of 20000 kg tested in accordance to ASTM D 4280 The marker should be resistant to dust and water ingress according to IP 65 standards and should withstand temperatures in the range of 0 C to 70 C Typical frequency of blinking is 1 Hz There should be current losses of less than 20 microamperes at 2.4V in sleepcharing mode to enhance the life of the marker and a full charge should provide for a minimum autonomy of 50 hours The height, width and length shall not be less than 10 mm X 100 mm X 100 mm Also the surface diameter of the marker shall not be less than 100 mm respectively. The weight of the marker shall not exceed 0.5 kilogram Fixing will be done by drilling holes on the road for the shanks to go inside without nails and using epoxy resin based adhesive and complete as directed by the engineer in charge The solar raised pavement markers shall be tested for Compression strength of 20000 Kg IP 65 rating Blinking frequency from government lab CRRI ARAI ICAT CPRI as per requirement of MoRTH and Test Report shall be submitted with Supply of material | 1 | Each | Mohar Singh Meena 110001,O/O Chief Engineer &#x 28;Civil-II&#x 29;,15 th Floor, Palika Kendra, New Delhi-110001 | 60 |
| 3 | title 3 | 3 Supplying and installation of Solar Raised Pavement markers made out of polycarbonate molded body with circular shape solar powered LED self illumination in active modE 360 degree illumination and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face in passive mode The marker shall support a load of 20000 kg tested in accordance to ASTM D 4280 The marker should be resistant to dust and water ingress according to IP 65 standards and should withstand temperatures in the range of 0 C to 70 C Typical frequency of blinking is 1 Hz There should be current losses of less than 20 microamperes at 2.4V in sleepcharing mode to enhance the life of the marker and a full charge should provide for a minimum autonomy of 50 hours The height, width and length shall not be less than 10 mm X 100 mm X 100 mm Also the surface diameter of the marker shall not be less than 100 mm respectively. The weight of the marker shall not exceed 0.5 kilogram Fixing will be done by drilling holes on the road for the shanks to go inside without nails and using epoxy resin based adhesive and complete as directed by the engineer in charge The solar raised pavement markers shall be tested for Compression strength of 20000 Kg IP 65 rating Blinking frequency from government lab CRRI ARAI ICAT CPRI as per requirement of MoRTH and Test Report shall be submitted with Supply of material | 1 | Each | Mohar Singh Meena 110001,O/O Chief Engineer &#x 28;Civil-II&#x 29;,15 th Floor, Palika Kendra, New Delhi-110001 | 60 |
| 4 | title 4 | 4 Supplying and installation of Solar Raised Pavement markers made out of polycarbonate molded body with circular shape solar powered LED self illumination in active modE 360 degree illumination and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face in passive mode The marker shall support a load of 20000 kg tested in accordance to ASTM D 4280 The marker should be resistant to dust and water ingress according to IP 65 standards and should withstand temperatures in the range of 0 C to 70 C Typical frequency of blinking is 1 Hz There should be current losses of less than 20 microamperes at 2.4V in sleepcharing mode to enhance the life of the marker and a full charge should provide for a minimum autonomy of 50 hours The height, width and length shall not be less than 10 mm X 100 mm X 100 mm Also the surface diameter of the marker shall not be less than 100 mm respectively. The weight of the marker shall not exceed 0.5 kilogram Fixing will be done by drilling holes on the road for the shanks to go inside without nails and using epoxy resin based adhesive and complete as directed by the engineer in charge The solar raised pavement markers shall be tested for Compression strength of 20000 Kg IP 65 rating Blinking frequency from government lab CRRI ARAI ICAT CPRI as per requirement of MoRTH and Test Report shall be submitted with Supply of material | 1 | Each | Mohar Singh Meena 110001,O/O Chief Engineer &#x 28;Civil-II&#x 29;,15 th Floor, Palika Kendra, New Delhi-110001 | 60 |
| 5 | title 5 | 5 Supplying and installation of Solar Raised Pavement markers made out of polycarbonate molded body with circular shape solar powered LED self illumination in active modE 360 degree illumination and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face in passive mode The marker shall support a load of 20000 kg tested in accordance to ASTM D 4280 The marker should be resistant to dust and water ingress according to IP 65 standards and should withstand temperatures in the range of 0 C to 70 C Typical frequency of blinking is 1 Hz There should be current losses of less than 20 microamperes at 2.4V in sleepcharing mode to enhance the life of the marker and a full charge should provide for a minimum autonomy of 50 hours The height, width and length shall not be less than 10 mm X 100 mm X 100 mm Also the surface diameter of the marker shall not be less than 100 mm respectively. The weight of the marker shall not exceed 0.5 kilogram Fixing will be done by drilling holes on the road for the shanks to go inside without nails and using epoxy resin based adhesive and complete as directed by the engineer in charge The solar raised pavement markers shall be tested for Compression strength of 20000 Kg IP 65 rating Blinking frequency from government lab CRRI ARAI ICAT CPRI as per requirement of MoRTH and Test Report shall be submitted with Supply of material | 1 | Each | Mohar Singh Meena 110001,O/O Chief Engineer &#x 28;Civil-II&#x 29;,15 th Floor, Palika Kendra, New Delhi-110001 | 60 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
bid_5160898.pdf
GEM_BID
gem-soq-new_2023-08-10-10-33-43_58e5dd9181c78a1855008bb7442fb73b.pdf
BOQ
boq_item_sample_file_2023-08-10-10-33-43_48daeece17cad9d3795f9f19b7cf0d51.csv
BOQ
UNDE_dfd1ff13-669d-4d45-a0991691646117233_eestore.civil@ndmc.gov.in.pdf
OTHER
gtc.pdf
OTHER
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .